Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
ग्राफ जहाँ (x)-अक्ष को काटता है वही शून्यक होता है। परीक्षा में काटने वाले बिंदुओं की संख्या गिनें। / A zero occurs where the graph meets the (x)-axis. In exams count the (x)-intercepts.
A. वह बिंदु बहुपद का शून्यक है और उसकी बहुगुण्यता सम (even multiplicity) है/That point is a zero of the polynomial with even multiplicity (touching root)
Explanation
Simple Explanation
जब ग्राफ x-अक्ष को केवल छूता है तो उस बिंदु पर बहुपद का मान y = 0 होता है और आस-पास के x के लिए फलन का चिह्न नहीं बदलता। यह व्यवहार तभी होता है जब वह शून्यक की बहुगुण्यता सम (even) हो — उदाहरण के लिए बहुगुण्यता 2 पर ग्राफ स्पर्श करके लौटता है। विकल्प B गलत है क्योंकि छूने का अर्थ है y=0 होना, केवल 'करीब' होना नहीं। विकल्प C गलत है क्योंकि विषम बहुगुण्यता पर ग्राफ अक्ष को काटकर पार कर जाएगा (चिह्न बदलता है)। विकल्प D भी गलत है — एक स्थिर बहुपद (degree 0) x-अक्ष को छू कर लौटने जैसा सामान्य व्यवहार नहीं देता सिवाय शून्य बहुपद के, जो विशेष स्थिति है। परीक्षा टिप: x‑अक्ष पर स्पर्श करते समय सबसे पहले शून्यक की बहुगुण्यता (multiplicity) देखें — सम होने पर स्पर्श, विषम होने पर कटना। / If the curve merely touches the x-axis at a point, the function value there is y=0 and the sign of the polynomial does not change on either side of the point. That occurs when the root has even multiplicity (e.g. multiplicity 2), so the graph is tangent to the axis. Option B is wrong because touching means the value is exactly zero, not just near zero. Option C is wrong because an odd-multiplicity root causes a sign change and the graph crosses the axis. Option D is incorrect — a degree‑0 polynomial is constant and does not produce a typical touch‑and‑return x‑intercept except in the degenerate zero polynomial case. Exam tip: determine the multiplicity of the root — even multiplicity gives touch (tangent), odd multiplicity gives crossing.
\(p(x)=0\) पर रखें: \(x^2-9=0\) से \(x^2=9\) और इसलिए \(x=\pm3\). बहुपद के शून्य (zeroes) x-अक्ष पर बिंदु के रूप में होते हैं, यानी \((x,0)\)। अतः शून्य बिंदु \((-3,0)\) और \((3,0)\) होंगे। विकल्प C गलत है क्योंकि \(x=\pm9\) रखने पर \(x^2-9\) शून्य नहीं होगा; विकल्प B और D का पहला समन 0 है इसलिए वे y-अक्ष पर स्थित बिंदु हैं और गलत हैं। परीक्षा टिप: हमेशा \(p(x)=0\) कर के x निकालें और उत्तर को (x,0) के रूप में लिखें। / Set \(p(x)=0\): \(x^2-9=0\) so \(x^2=9\) and \(x=\pm3\). Zeros of the polynomial are x-axis intercepts, i.e. points of the form \((x,0)\). Therefore the graph intersects the x-axis at \((-3,0)\) and \((3,0)\). Option C is incorrect because \(x=\pm9\) does not satisfy the equation; options B and D give points with x=0 (y-axis), so they are wrong. Exam tip: to find x-intercepts set \(p(x)=0\), solve for x, then report as (x,0).
A. बराबर शून्यक (4) और (4)/Equal zeroes (4) and (4)
Explanation
Simple Explanation
द्विघात ग्राफ एक बिंदु पर छूता है तो दोनों शून्यक समान होते हैं। परीक्षा में इसे दोहराया शून्यक मानें। / When a quadratic graph touches at one point its two zeroes are equal. Treat it as a repeated zero in exams.
A. ग्राफ \(x\)-अक्ष को \((2,0)\) पर छेदता है/The graph intersects the \(x\)-axis at \((2,0)\)
Explanation
Simple Explanation
\(p(2)=0\) का अर्थ है कि \(x=2\) पर फलन का मान \(y=0\) है, अर्थात् बिंदु \((2,0)\) ग्राफ पर स्थित है। यह वही परिभाषा है जिससे यह पता चलता है कि \(2\) एक शून्य (zero) या x-इंटरसेप्ट है। विकल्प B गलत है क्योंकि \(y\)-अक्ष पर आने का अर्थ \(x=0\) होता है, न कि \(x=2\)। विकल्प C सिर्फ किसी क्वाड्राटिक के शीर्ष का दावा करता है; \(p(2)=0\) से शीर्ष का स्थान नहीं मिलता। विकल्प D गलत है क्योंकि \(x=2\) एक पूर्ण ऊर्ध्वाधर रेखा होगी जिसमें हर संभव \(y\) मान आएंगे, जबकि \(p(2)=0\) केवल एक बिंदु बताता है। परीक्षा टिप: सामान्य नियम — यदि \(p(a)=0\) तो बिंदु \((a,0)\) ग्राफ का x-इंटरसेप्ट है; बहुलकता (multiplicity) से पता चलता है कि क्या ग्राफ उस बिंदु पर कटता है या छुकर लौटता है। / \(p(2)=0\) means that at \(x=2\) the function value is \(y=0\), so the point \((2,0)\) lies on the graph. Thus 2 is a zero of the function and corresponds to the x-intercept. Option B is wrong because the y-axis corresponds to \(x=0\), not \(x=2\). Option C is irrelevant: a single equation \(p(2)=0\) does not determine a vertex location. Option D is incorrect because \(x=2\) as a vertical line would contain all \(y\) values, whereas \(p(2)=0\) specifies only the single point \((2,0)\). Exam tip: remember that \(p(a)=0\) always gives the x-intercept \((a,0)\); multiplicity of the root tells you if the graph crosses or merely touches the axis.
x-प्रतिच्छेद वे बिंदु होते हैं जहाँ ग्राफ y=0 होता है; इसलिए शून्यक उन बिंदुओं के x-निर्देशांक होते हैं। दिए गए बिंदु (-4,0), (1,0) और (6,0) के x-निर्देशांक क्रमशः -4, 1 और 6 हैं, अतः शून्यकों का समुच्चय {-4, 1, 6} है। विकल्प B, C और D में 0 शामिल है जो y-निर्देशांक है, न कि x-शून्यक; इसलिए वे गलत हैं। परीक्षा टिप: शून्यकों को समुच्चय के रूप में लिखें और द्विघात/बहुपद में समान शून्यक की बारम्बारता (multiplicity) पर ध्यान दें। / The x-intercepts occur where y=0, so the zeroes are the x-coordinates of those intercepts. From (-4,0), (1,0) and (6,0) the x-values are -4, 1 and 6, hence the zero set is {-4, 1, 6}. Options B, C and D wrongly include 0 (a y-coordinate) instead of the x-value -4, so they are incorrect. Exam tip: list roots as a set (order doesn't matter) and check for repeated roots (multiplicity) if a point repeats or the graph merely touches the x-axis.
x-अक्ष पर किसी भी बिंदु का y-मान शून्य होता है, अतः बिंदु \((7,0)\) का y-समन्वय \(0\) है। इसलिए उस बिंदु पर \(p(7)=0\)। विकल्प B (7) भ्रमित करने वाला है क्योंकि 7 x-निर्देशांक है, परंतु फलन का मान नहीं। परीक्षा-सुझाव: किसी भी बिंदु \((a,0)\) पर यदि ग्राफ x-अक्ष को काटे तो तुरंत लिखें \(p(a)=0\)। / Any point on the x-axis has y-coordinate zero, so at the point \((7,0)\) the function value is \(0\). Therefore \(p(7)=0\). Option B (7) confuses the x-coordinate with the function value; option C (−7) and D (1) are just incorrect numerical choices. Exam tip: For intersection \((a,0)\) with the x-axis always record \(p(a)=0\).
हर गुणनखंड को शून्य मानने पर मिलते हैं: x-1=0 ⇨ x=1 और x+4=0 ⇨ x=-4। x-प्रतिच्छेद वे बिंदु होते हैं जिनका y-अंश 0 होता है, अतः (1,0) और (-4,0)। गुणांक 2 केवल ग्राफ की ऊर्ध्वाधर स्केल बदलता है, शून्यस्थल नहीं। निकटतम भ्रमक विकल्प C में (-4,0) सही है पर दूसरा बिंदु (2,0) गलत है क्योंकि (x-1)=0 से x=1 होना चाहिए न कि 2। परीक्षा टिप: फैक्टर्स को 0 पर रखें और प्राप्त शून्य को (root,0) के रूप में लिखें। / Set each factor to zero: x-1=0 gives x=1 and x+4=0 gives x=-4. x-intercepts are points with y=0, so (1,0) and (-4,0). The leading factor 2 only scales the graph vertically and does not change the zeros. Closest distractor C contains the correct (-4,0) but incorrectly lists (2,0) instead of (1,0); option B flips the signs. Exam tip: For factorised polynomials set each factor to zero and record each root as (root,0).
शून्यक (root) उस x‑मान को कहते हैं जिस पर बहुपद का मान शून्य होता है। इसलिए यदि \(p(3)=0\) है तो \(x=3\) बहुपद का शून्यक है। अन्य विकल्प गलत हैं क्योंकि: \(p(0)=3\) में \(x=3\) का परीक्षण ही नहीं है; ग्राफ यदि \((0,3)\) से गुजरता है तो वह y‑अक्ष पर बिंदु (0,3) दर्शाता है, न कि x‑अक्ष पर शून्य; और \(p(3)=3\) में मान शून्य नहीं है। परीक्षा टिप: किसी भी कथित शून्य के लिए सीधे बहुपद में वह x‑मान रखकर मान जांचें (p(a) देखें)। / A zero (root) is an x‑value at which the polynomial evaluates to zero. So if \(p(3)=0\), then \(x=3\) is a zero of \(p(x)\). The other choices are wrong: \(p(0)=3\) checks the value at x=0, not at x=3; passing through \((0,3)\) is a y‑intercept, not an x‑intercept (root); and \(p(3)=3\) gives a nonzero value. Exam tip: to verify if \(x=a\) is a root compute \(p(a)\) and check if it equals 0.
x-अक्ष को काटना दर्शाता है कि x = -5 पर एक वास्तविक शून्यक मौजूद है। x = 2 पर 'स्पर्श' होने का अर्थ है कि x = 2 भी शून्यक है (आमतौर पर सम बहुलकता — multiplicity ≥ 2), पर यह भी एक ही भिन्न वास्तविक शून्यक गिना जाता है। अतः भिन्न वास्तविक शून्यक x = -5 और x = 2 — कुल 2। विकल्प C (तीन) केवल तब सही होता अगर प्रश्न में शून्यकों को उनकी बहुलकता सहित गिनने को कहा गया हो (उदाहरण: multiplicity 1 at -5 और multiplicity 2 at 2 → कुल गणनात्मक शून्य 3), पर यहाँ भिन्न शून्यकों की संख्या माँगी गई है। परीक्षा-टिप: प्रश्न में देखें कि ‘भिन्न’ (distinct) माँगा है या 'बहुलकता सहित' (counting multiplicity)। / A crossing at x = -5 gives a real root at -5. A touch (tangent) at x = 2 also gives a real root at 2 (typically with even multiplicity), but it still counts as one distinct real zero. Therefore the distinct real zeros are x = -5 and x = 2 — two in total. Option C (three) would be correct only if you were asked to count zeros with multiplicity (for example multiplicity 1 at -5 and multiplicity 2 at 2 would total 3). Exam tip: check whether the question asks for distinct zeros or asks to count multiplicities.
जब किसी बहुपद का ग्राफ \(x\)-अक्ष को किसी बिंदु पर काटता है तो उस बिंदु पर व्युत्पन्न मान \(y\) (अर्थात \(p(x)\)) शून्य होता है। अतः यदि ग्राफ \(x\)-अक्ष को \(a\) और \(b\) पर काट रहा है तो \(p(a)=0\) और \(p(b)=0\)। निकटतम भ्रान्तिकर विकल्प C (एक शून्य और एक गैर-शून्य) इसलिए गलत है क्योंकि किसी कटने के बिंदु पर मान शून्य होना अनिवार्य है। विकल्प D भी गलत है क्योंकि शून्य का कोई सकारात्मक/नकारात्मक चिह्न नहीं होता। परीक्षा टिप: x‑अक्ष पर मिलने का मतलब सीधे याद रखें — \(y=0\) या \(p(x)=0\)। / When the graph of a polynomial meets the \(x\)-axis at a point, the polynomial's value \(y=p(x)\) at that point is zero. Therefore if the graph cuts the \(x\)-axis at \(a\) and \(b\), we have \(p(a)=0\) and \(p(b)=0\). The closest distractor C (one zero and one non-zero) is wrong because intersection points on the x‑axis must give \(p(x)=0\). Option D is also incorrect since zero has no sign (it is neither positive nor negative). Exam tip: intersection with the x‑axis always means \(y=0\) or \(p(x)=0\).
A. इससे शून्यक निश्चित नहीं किया जा सकता/A zero cannot be determined from this alone
Explanation
Simple Explanation
y‑प्रतिच्छेद बताता है कि x = 0 पर बहुपद का मान क्या है; यहाँ यह दर्शाता है कि \(p(0) = -8\)। शून्यक वे x‑मूल्य होते हैं जिनके लिए \(p(x)=0\) अर्थात् ग्राफ x‑अक्ष को काटता है। इसलिए केवल y‑प्रतिच्छेद से शून्यक निर्धारित नहीं किए जा सकते। विकल्प B यह भूल है कि y‑मान (-8) को शून्यक समझ लिया गया; विकल्प C तब भी गलत है क्योंकि p(0) = -8 ≠ 0; विकल्प D कोई तर्कसंगत संबंध नहीं दर्शाता। परीक्षा टिप: शून्यक खोजने के लिए ग्राफ के x‑अक्ष पर कटने वाले बिंदुओं (x‑intercepts) देखें, y‑प्रतिच्छेद केवल \(p(0)\) देता है। / The y‑intercept gives the value of the polynomial at x = 0; here it shows \(p(0) = -8\). Zeros (roots) are x values for which \(p(x)=0\), i.e. where the graph intersects the x‑axis. Thus a y‑intercept alone does not determine the zeros. Option B mistakes the y‑value (-8) for a root; option C is wrong because p(0) = -8 ≠ 0; option D is unrelated. Exam tip: to find zeros look for x‑intercepts (points where y=0); y‑intercept only gives \(p(0)\).
किसी बहुपद के शून्यक वे x-मान होते हैं जहाँ बहुपद शून्य हो। गुणनखंड -(x-3)(x+1) में बाहरी ऋण चिह्न मान्यताओं को बदलता है पर शून्यक नहीं बदलता। इसलिए (x-3)=0 से x=3 और (x+1)=0 से x=−1 मिलता है। निकटवर्ती विचलन: विकल्प D में दूसरा शून्य +1 है जो (x+1) को गलत पढ़ने पर आ सकता है; विकल्प C में 0 को शामिल करना तब होता है जब किसी ने x के किसी कारक को ग़लत तरीके से मान लिया हो। परीक्षा टिप: हर गुणनखंड को 0 के बराबर करके सीधे शून्यक निकालें और साइन के चिह्न से भ्रमित न हों। / Zeros of a polynomial are the x-values that make it zero. For p(x)=-(x-3)(x+1) the leading negative sign does not change the zeros. Set each factor to zero: x-3=0 gives x=3, x+1=0 gives x=−1. Why other choices are wrong: choice D mistakenly uses +1 instead of −1; choice C includes 0 which would require a factor x, not present. Exam tip: set each linear factor equal to zero; ignore an overall constant factor (including a minus sign) when finding zeros.
शून्य बहुपद \(p(x)=0\) का अर्थ है कि प्रत्येक वास्तविक x के लिए y का मान 0 होगा। इसलिए ग्राफ उन सभी बिंदुओं का समूह है जो रूप में हैं \(\{(x,0):x\in\mathbb{R}\}\) — अर्थात् पूरा x-अक्ष। विकल्प B गलत है क्योंकि y-अक्ष के बिंदु \((0,y)\) का सामान्य रूप y=0 नहीं है। विकल्प C गलत है क्योंकि अनगिनत बिंदु मौजूद हैं (हर x पर y=0)। विकल्प D गलत है क्योंकि केवल मूल बिंदु नहीं बल्कि हर x पर बिंदु मौजूद हैं। परीक्षा टिप: जब किसी बहुपद को शून्य बताया जाए तो याद रखें वह "पहचान के बराबर शून्य" है यानी हर x पर y=0। / The zero polynomial \(p(x)=0\) yields y=0 for every real x, so its graph is the set \(\{(x,0):x\in\mathbb{R}\}\), i.e. the entire x-axis. Option B is incorrect because the y-axis consists of points \((0,y)\), not points with y=0. Option C is wrong because there are infinitely many points (one for each x). Option D is wrong because the graph is not just the origin but all points with y=0. Exam tip: For an identically zero polynomial check values for all x — the graph will be the horizontal line y=0 (the x-axis).
यदि किसी फलन का ग्राफ केवल बिंदु जहाँ \(x=-6\) पर ही x-अक्ष को काटता है (यानी वहीं \(y=0\) होता है) और अन्य किसी भी बिंदु पर x-अक्ष से दूर रहता है, तो उस फलन का शून्यक (zero) क्या है?
शून्यक वह x–मान है जहाँ फलन का मान \(y=0\) होता है. प्रश्न में स्पष्ट रूप से कहा गया है कि केवल \(x=-6\) पर ही \(y=0\) है और किसी अन्य बिंदु पर नहीं, अत: शून्यक \(-6\) है. विकल्प B (6) और C (0) गलत हैं क्योंकि उन बिंदुओं पर \(y\) का शून्य होने का संकेत नहीं दिया गया है. परीक्षा टिप: ग्राफ पर जहाँ x-अक्ष को काटा गया हो वही x-निर्देशक शून्यक होता है; काटना (cross) और छूना (touch) अलग-अलग गुणसूत्र (multiplicity) दिखाते हैं। / A zero is an x-value where the function value is \(y=0\). The problem states that \(y=0\) occurs only at \(x=-6\) and nowhere else, so the zero is \(-6\). Options 6 and 0 are incorrect because the graph is not said to meet the x-axis at those x-values. Exam tip: read the x-coordinate of points where the graph intersects the x-axis; note also that whether the graph crosses or merely touches the axis indicates multiplicity but does not change the x-value of the zero.
शून्यक का अर्थ है वह x‑मान जहाँ p(x)=0। यहाँ स्पष्ट रूप से p(1)=0 दिया है, अतः x=1 निश्चित रूप से शून्यक है। p(-3)<0 और p(4)>0 यह केवल बताते हैं कि उन बिंदुओं पर मान शून्य नहीं है; हालाँकि बहुपद सतत होता है इसलिए p(-3) और p(4) के विभिन्न चिह्न होने से (-3,4) के अंदर कम-से-कम एक शून्य उपस्थित होने की गारंटी है, पर वह किसी भी विशेष बिंदु (जैसे -3 या 4) पर होना अनिवार्य नहीं है. निकटतम भ्रामक विकल्प (-3 और 4) गलत है क्योंकि दोनों पर दिए गए मान शून्य नहीं हैं। परीक्षा सुझाव: किसी बिंदु के शून्य होने के लिए p(x)=0 स्पष्ट रूप से दिया होना चाहिए; केवल चिह्न परिवर्तन से किसी अंतराल में शून्य का अस्तित्व पता चलता है, उसकी ठोस स्थिति नहीं। / A root means an x where p(x)=0. Here p(1)=0 is explicitly given, so x=1 is certainly a root. The facts p(-3)<0 and p(4)>0 only show those values are nonzero; although polynomials are continuous and a sign change guarantees at least one root in (-3,4), it does not force the root to be at -3 or 4. Thus the option “-3 and 4” is incorrect because both p(-3) and p(4) are nonzero. Exam tip: look for an explicit p(x)=0 for a definite root; use sign changes only to conclude existence inside intervals, not exact locations.
x-अक्ष के साथ प्रतिच्छेद के लिये बहुपद के शून्य खोजें: \(p(x)=0\) । यहाँ \(4x=0\) से \(x=0\) मिलता है। इसलिए प्रतिच्छेद बिंदु \((0,0)\) है। निकटतम भ्रामक विकल्प \((4,0)\) गलत है क्योंकि \(p(4)=4\times4=16\) शून्य नहीं है। विकल्प \((0,4)\) को भ्रमित करने से बचें — वह y-अक्ष पर बिंदु है (यदि \(p(0)=4\) होता)। परीक्षा टिप: किसी भी बहुपद का x-अक्ष पर प्रतिच्छेद खोजने के लिये \(p(x)=0\) करके x के मान निकालें और उत्तर को \((x,0)\) रूप में लिखें। / To find intersection with the x-axis, set the polynomial equal to zero: \(p(x)=0\). Here \(4x=0\) gives \(x=0\), so the intersection point is \((0,0)\). The closest distractor \((4,0)\) is incorrect because \(p(4)=4\times4=16\), not zero. \((0,4)\) is a y-value confusion (it would be the point \((0,y)\) if \(p(0)=4\)). Exam tip: always solve \(p(x)=0\) for x and report the intercept as \((x,0)\).
शून्यक (zero) वह x‑मान होता है जहाँ फंक्शन का मान शून्य होता है। x‑अक्ष पर कटने का बिंदु \((2.5,0)\) बताता है कि f(2.5)=0, अतः शून्यक संख्या \(2.5\) है। विकल्प B बिंदु है न कि शून्यक; विकल्प C केवल y‑मान (0) है; विकल्प D में निर्देशांक उल्टे हैं। परीक्षा टिप: x‑अक्ष पर इंटरसेप्ट का पहले घटक ही शून्यक होता है — यानी अगर बिंदु \((a,0)\) है तो शून्यक \(a\) है। / A zero of a polynomial is the x‑value where the function equals zero. The intercept \((2.5,0)\) means \(f(2.5)=0\), so the zero is the number \(2.5\). Option B is the coordinate point (not the numerical root); C is the y‑value 0; D has the coordinates reversed. Exam tip: when the graph meets the x‑axis at \((a,0)\), the zero (root) is the x‑coordinate \(a\).
x-अक्ष पर मिलने के लिये p(x)=0 होना चाहिए। इसलिए
\(x^2-2x-8=0\)
इसे गुणनखण्डित करें: \(x^2-2x-8=(x-4)(x+2)\)। अतः \(x=4\) और \(x=-2\)। इसलिए x-अक्ष पर मिलने वाले बिंदु (-2,0) और (4,0) हैं। विकल्प B गलत है क्योंकि वह जड़ें x=2 और x=-4 देता है जो समीकरण को संतुष्ट नहीं करतीं; विकल्प C साथों (y)-अक्ष पर बिंदु दिखा रहा है; विकल्प D यादृच्छिक है। परीक्षा टिप: x-अक्ष पर छेदने के बिंदु पाने के लिये हमेशा p(x)=0 रखें और गुणनखंड या द्विघाती सूत्र से हल करें। / To meet the x-axis we set p(x)=0. So
\(x^2-2x-8=0\).
Factorizing gives \(x^2-2x-8=(x-4)(x+2)\). Thus \(x=4\) and \(x=-2\), so the intersection points are (-2,0) and (4,0). Option B is incorrect because it corresponds to roots x=2 and x=-4 which do not satisfy the equation; option C lists points on the y-axis; option D is unrelated. Exam tip: Always set p(x)=0 to find x-intercepts and solve by factoring or the quadratic formula to avoid sign mistakes.
बहुपद का शून्यक वह x‑मान होता है जिसके लिए ग्राफ x‑अक्ष को काटता (y = 0)। प्रतिच्छेद \(-\sqrt{3},0\) में x‑निर्देशांक -\sqrt{3} है, इसलिए शून्यक -\sqrt{3} होगा। विकल्प B गलत है क्योंकि संकेत विपरीत है; विकल्प C केवल y‑निर्देशांक (यहाँ 0) है, जो शून्यक नहीं है; विकल्प D पूरे बिंदु को दर्शाता है, जबकि शून्यक एक मात्रांक (x‑मान) होता है। परीक्षा सुझाव: x‑अक्ष का प्रतिच्छेद हमेशा (x,0) के रूप में लिखें — शून्यक वही x होगा। / A zero of a polynomial is the x‑value where its graph meets the x‑axis (y = 0). The intercept \(-\sqrt{3}, 0\) has x‑coordinate -\sqrt{3}, so the zero is -\sqrt{3}. Option B has the wrong sign; option C is the y‑coordinate (0) not the x‑value; option D gives the ordered pair, not the zero (a single x‑value). Exam tip: remember x‑axis intercepts are of the form (x,0); the zero is the x in that pair.
बिंदु \\((9,0)\\) x-अक्ष पर है, अतः बिंदु का y-निर्देशांक शून्य है। यदि ग्राफ किसी बहुपद p(x) का है तो \\((p(9)=0)\\) होगा — इसका अर्थ है कि x=9 उस बहुपद का शून्यक (root) है। प्रश्न में ऊपर से नीचे क्रॉस होना संकेत देता है कि बहुपद का मान उस बिंदु पर साइन बदलता है (positive से negative) — यह केवल x-अक्ष पर मौजूद सामान्य बिंदु होने का बयान (विकल्प D) गलत ठहराता है; विकल्प C भी गलत है क्योंकि वहाँ y=0 होना चाहिए न कि 9। परीक्षा-टिप: किसी भी बिंदु के शून्यक होने की जाँच के लिए बिंदु का y-निर्देशांक देखें — यदि y=0 तो संबंधित x मान root है। / The point \\((9,0)\\) lies on the x-axis, so its y-coordinate is zero. For a graph of a polynomial p(x), this means \\((p(9)=0)\\) — therefore x=9 is a root (zero) of the polynomial. The fact that the curve goes from above to below shows a sign change at x=9 (crossing the axis). Option D is wrong because a point on the x-axis with y=0 is by definition a zero; option C is wrong because it asserts p(9)=9 whereas the y-value is 0. Exam tip: always check the y-coordinate — if y=0 the corresponding x is a zero of the polynomial.