Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects

Class 12 Chemistry Expert Quiz

Level 15 • 50/50 questions • 25 seconds per question.

Level readiness 50/50 Questions
Time Left 20:50 25 sec/question
RewardsCoins + XP
ModeClassic Quiz
Share
Question 1 / 50 0 score
Answered 0/50 Correct 0 Time 20:50

किसी विलयन में विलेय के कण पूर्ण रूप से असंबद्ध रहते हैं। यदि उसी विलेय के आधे कण द्वि-अणुक संघ बना लें तो समान मोललता पर प्रेक्षित हिमांक अवनमन आदर्श मान की तुलना में कैसा होगा?

In a solution, solute particles normally remain completely unassociated. If half of the solute particles form dimers, how will the observed depression in freezing point compare with the ideal value at the same molality?

Explanation opens after your attempt
Correct Answer

B. आदर्श मान का तीन-चौथाईThree-fourths of the ideal value

Step 1

Concept

हिमांक अवनमन कणों की प्रभावी संख्या पर निर्भर करता है। / Depression in freezing point depends on the effective number of solute particles.

Step 2

Why this answer is correct

आधे कण अकेले रहेंगे और आधे कण मिलकर द्वि-अणुक कण बनाएंगे, इसलिए प्रभावी कण संख्या घटकर \(\frac{3}{4}\) हो जाती है। / Half the particles remain single and half combine into dimers, so the effective particle count becomes \(\frac{3}{4}\) of the ideal count.

Step 3

Exam Tip

परीक्षा में संघ होने पर वान्ट हॉफ गुणक को एक से कम मानने की आदत रखें। / In exams, remember that association makes the van't Hoff factor less than one.

Open Question Page
Ask Friends

किस स्थिति में किसी विलेय के लिए वान्ट हॉफ गुणक का मान 1 से कम होने की अपेक्षा की जाती है?

In which situation is the van't Hoff factor of a solute expected to be less than 1?

Explanation opens after your attempt
Correct Answer

A. विलेय कणों का परस्पर संयोजन होकर द्वयणु बनाना

Explanation

Simple Explanation

विलेय कणों के संयोजन से विलयन में स्वतंत्र कणों की संख्या घटती है, इसलिए वान्ट हॉफ गुणक 1 से कम होता है। पूर्ण विघटन में कण बढ़ते हैं और i 1 से अधिक होता है। परीक्षा टिप: संयोजन के लिए i < 1 याद रखें। / Association combines solute particles and reduces the number of independent particles in solution, so the van't Hoff factor is below 1. Complete dissociation increases particle count and gives i > 1. Exam tip: remember association means i < 1.

Open Question Page
Ask Friends

एक आदर्श विलयन में केवल विलेय की मात्रा बढ़ाई जाती है, विलायक समान रहता है। निम्न में से कौन-सा कथन सबसे सही है?

In an ideal solution, only the amount of solute is increased while the solvent remains the same. Which statement is the most correct?

Explanation opens after your attempt
Correct Answer

B. वाष्प दाब घटेगा और क्वथनांक बढ़ेगाVapour pressure decreases and boiling point increases

Step 1

Concept

अवाष्पशील विलेय विलायक के वाष्प दाब को कम करता है। / A non-volatile solute lowers the vapour pressure of the solvent.

Step 2

Why this answer is correct

कम वाष्प दाब के कारण बाहरी दाब तक पहुंचने के लिए अधिक ताप चाहिए, इसलिए क्वथनांक बढ़ता है। / Because vapour pressure is lower, a higher temperature is needed to reach external pressure, so boiling point increases.

Step 3

Exam Tip

वाष्प दाब और क्वथनांक को उल्टे संबंध की तरह याद करें। / Remember vapour pressure lowering and boiling point elevation as connected effects.

Open Question Page
Ask Friends

विरल विलयनों में प्रोटीन जैसे उच्च अणुभार वाले विलेयों का अणुभार निर्धारित करने के लिए कौन-सा अणुसंख्यक गुण सबसे उपयुक्त माना जाता है?

Which colligative property is considered most suitable for determining the molar mass of high-molar-mass solutes such as proteins in dilute solutions?

Explanation opens after your attempt
Correct Answer

D. परासरण दाबOsmotic pressure

Explanation

Simple Explanation

परासरण दाब उच्च अणुभार वाले विलेयों के लिए भी कमरे के ताप पर आसानी से मापा जा सकता है। aPi = CRT से सांद्रता ज्ञात कर अणुभार निकाला जाता है। हिमांक या क्वथनांक परिवर्तन बहुत छोटे हो सकते हैं। परीक्षा टिप: प्रोटीन के लिए परासरण दाब चुनें। / Osmotic pressure is measurable accurately at room temperature even for very large solutes. From aPi = CRT, concentration can be used to obtain molar mass. Freezing- or boiling-point changes may be too small. Exam tip: choose osmotic pressure for proteins.

Open Question Page
Ask Friends

किसी बहुलक का परासरण दाब बहुत छोटा पाया जाता है। उसके मोलर द्रव्यमान के निर्धारण के लिए कौन-सी विधि सबसे उपयुक्त मानी जाती है?

The osmotic pressure of a polymer solution is very small. Which method is considered most suitable for determining its molar mass?

Explanation opens after your attempt
Correct Answer

C. परासरण दाब विधिOsmotic pressure method

Step 1

Concept

बहुलकों का मोलर द्रव्यमान बहुत अधिक होता है, इसलिए उनके विलयनों के अणुसंख्य गुण छोटे होते हैं। / Polymers have very high molar mass, so their colligative effects are small.

Step 2

Why this answer is correct

परासरण दाब कमरे के ताप पर भी मापा जा सकता है और बहुत संवेदनशील होता है। / Osmotic pressure can be measured at room temperature and is relatively sensitive.

Step 3

Exam Tip

बड़े मोलर द्रव्यमान के लिए परासरण दाब विधि को प्राथमिकता दें। / For high molar mass substances, prefer osmotic pressure method.

Open Question Page
Ask Friends

दो विलयनों (A) और (B) का परासरण दाब समान ताप पर समान है। यदि (A) में (NaCl) पूर्ण वियोजित है और (B) में अविद्युत् विलेय है, तो समान आयतन में किस विलयन में वास्तविक घुले मोल कम होंगे?

Two solutions (A) and (B) have the same osmotic pressure at the same temperature. If (A) contains completely dissociated (NaCl) and (B) contains a nonelectrolyte, which solution has fewer actual dissolved moles in the same volume?

Explanation opens after your attempt
Correct Answer

A. (A)

Step 1

Concept

परासरण दाब \(\pi=iCRT\) पर निर्भर करता है। / Osmotic pressure depends on \(\pi=iCRT\).

Step 2

Why this answer is correct

(NaCl) के लिए \(i\approx2\), इसलिए समान \(\pi\) पाने के लिए इसकी वास्तविक सांद्रता अविद्युत् विलेय से कम होगी। / For (NaCl), \(i\approx2\), so a lower actual concentration gives the same \(\pi\) as a nonelectrolyte.

Step 3

Exam Tip

समान परासरण दाब में प्रभावी कण बराबर होते हैं, वास्तविक मोल नहीं। / In equal osmotic pressure, effective particles are equal, not necessarily actual moles.

Open Question Page
Ask Friends

यदि किसी विलेय का प्रेक्षित मोलर द्रव्यमान सामान्य मोलर द्रव्यमान से अधिक मिलता है, तो सबसे संभावित कारण क्या है?

If the observed molar mass of a solute is found to be greater than its normal molar mass, what is the most likely reason?

Explanation opens after your attempt
Correct Answer

B. विलेय का संघAssociation of solute

Step 1

Concept

प्रेक्षित मोलर द्रव्यमान \(M_{\text{obs}}=\frac{M_{\text{normal}}}{i}\) से जुड़ा है। / Observed molar mass is related as \(M_{\text{obs}}=\frac{M_{\text{normal}}}{i}\).

Step 2

Why this answer is correct

संघ में \(i<1\), इसलिए प्रेक्षित मोलर द्रव्यमान सामान्य से अधिक आता है। / In association, \(i<1\), so the observed molar mass becomes higher than the normal value.

Step 3

Exam Tip

अधिक मोलर द्रव्यमान दिखे तो संघ की संभावना पहले जांचें। / If molar mass appears higher, check association first.

Open Question Page
Ask Friends

किस स्थिति में \(CaCl_2\) का विलयन (NaCl) के समान मोलल विलयन से अधिक हिमांक अवनमन दिखाएगा?

Under which condition will a \(CaCl_2\) solution show greater depression in freezing point than an equimolal (NaCl) solution?

Explanation opens after your attempt
Correct Answer

B. जब दोनों पूर्ण वियोजित होंWhen both are completely dissociated

Step 1

Concept

समान मोललता पर हिमांक अवनमन (i) पर निर्भर करता है। / At equal molality, freezing point depression depends on (i).

Step 2

Why this answer is correct

पूर्ण वियोजन पर (NaCl) लगभग (2) आयन और \(CaCl_2\) लगभग (3) आयन देता है, इसलिए \(CaCl_2\) का प्रभाव अधिक है। / On complete dissociation, (NaCl) gives about (2) ions and \(CaCl_2\) gives about (3) ions, so \(CaCl_2\) has a larger effect.

Step 3

Exam Tip

समान सांद्रता वाले लवणों में आयनों की संख्या जरूर देखें। / For salts of equal concentration, always compare the number of ions.

Open Question Page
Ask Friends

किसी विलयन में (0.2) मोल अवाष्पशील विलेय (1,kg) जल में घुला है। यदि विलेय के (50%) अणु द्वि-अणुक संघ बनाते हैं, तो प्रभावी मोललता क्या होगी?

A solution contains (0.2) mole of a non-volatile solute in (1,kg) water. If (50%) of the solute molecules form dimers, what is the effective molality?

Explanation opens after your attempt
Correct Answer

B. (0.15,m)

Step 1

Concept

(50%) अणु अकेले और (50%) अणु संघित हैं। / (50%) molecules remain single and (50%) are associated.

Step 2

Why this answer is correct

संघित (0.1) मोल अणु मिलकर (0.05) मोल द्वि-अणुक कण देंगे, अतः कुल प्रभावी मोल (0.1+0.05=0.15) हैं। / The associated (0.1) mole molecules form (0.05) mole dimers, so total effective moles are (0.1+0.05=0.15).

Step 3

Exam Tip

संघ में पहले कणों की वास्तविक संख्या घटाकर सोचें। / In association, first reduce the actual number of particles.

Open Question Page
Ask Friends

समान ताप पर (0.1,M) यूरिया और (0.1,M) \(K_2SO_4\) के आदर्श पूर्ण वियोजित विलयनों के परासरण दाबों का अनुपात क्या होगा?

At the same temperature, what will be the ratio of osmotic pressures of (0.1,M) urea and (0.1,M) completely dissociated \(K_2SO_4\) solutions?

Explanation opens after your attempt
Correct Answer

C. (1:3)

Step 1

Concept

यूरिया अविद्युत् है, इसलिए (i=1)। / Urea is a nonelectrolyte, so (i=1).

Step 2

Why this answer is correct

\(K_2SO_4\) पूर्ण वियोजित होकर (3) आयन देता है, इसलिए (i=3)। / Fully dissociated \(K_2SO_4\) gives (3) ions, so (i=3).

Step 3

Exam Tip

समान सांद्रता और ताप पर परासरण दाबों का अनुपात (i) के अनुपात जैसा होता है। / At equal concentration and temperature, osmotic pressure ratio follows the ratio of (i).

Open Question Page
Ask Friends

किस अणुसंख्य गुण का उपयोग रक्त कोशिकाओं के फटने या सिकुड़ने को समझाने में सीधे किया जाता है?

Which colligative property is directly used to explain bursting or shrinking of blood cells?

Explanation opens after your attempt
Correct Answer

D. परासरण दाबOsmotic pressure

Step 1

Concept

रक्त कोशिकाओं में अर्धपारगम्य झिल्ली होती है। / Blood cells have a semipermeable membrane.

Step 2

Why this answer is correct

जल का अंदर या बाहर जाना विलयन के परासरण दाब के अंतर से नियंत्रित होता है। / Movement of water in or out is controlled by the difference in osmotic pressure.

Step 3

Exam Tip

कोशिका आधारित प्रश्नों में परासरण और समपरासरी विलयन को जोड़कर सोचें। / In cell-based questions, connect osmosis with isotonic solutions.

Open Question Page
Ask Friends

यदि किसी विलयन का क्वथनांक उन्नयन अपेक्षित मान से अधिक है, तो निम्न में से कौन-सा कारण सबसे उपयुक्त है?

If the elevation in boiling point of a solution is greater than the expected value, which reason is most suitable?

Explanation opens after your attempt
Correct Answer

B. विलेय का वियोजनDissociation of solute

Step 1

Concept

क्वथनांक उन्नयन कणों की संख्या बढ़ने पर बढ़ता है। / Boiling point elevation increases when the number of particles increases.

Step 2

Why this answer is correct

वियोजन से एक सूत्र इकाई कई आयनों में टूटती है, इसलिए (i>1) और उन्नयन अधिक होता है। / Dissociation breaks one formula unit into several ions, so (i>1) and elevation becomes higher.

Step 3

Exam Tip

अधिक अणुसंख्य प्रभाव दिखे तो वियोजन की दिशा में सोचें। / If a colligative effect is larger than expected, think of dissociation.

Open Question Page
Ask Friends

दो समान मोलल विलयन हैं। पहले में \(BaCl_2\) पूर्ण वियोजित है और दूसरे में ग्लूकोज है। उनके हिमांक अवनमन का अनुपात क्या होगा?

Two equimolal solutions are given. The first contains completely dissociated \(BaCl_2\) and the second contains glucose. What is the ratio of their freezing point depressions?

Explanation opens after your attempt
Correct Answer

C. (3:1)

Step 1

Concept

समान मोललता पर \(\Delta T_f\) का अनुपात (i) पर निर्भर करता है। / At equal molality, the ratio of \(\Delta T_f\) depends on (i).

Step 2

Why this answer is correct

\(BaCl_2\) से (3) आयन मिलते हैं और ग्लूकोज का (i=1) है। / \(BaCl_2\) gives (3) ions, while glucose has (i=1).

Step 3

Exam Tip

पूर्ण वियोजन वाले लवणों में कुल आयन गिनना सबसे तेज तरीका है। / For fully dissociated salts, counting total ions is the fastest method.

Open Question Page
Ask Friends

यदि किसी विलयन का सापेक्ष वाष्प दाब अवनमन (0.02) है, तो पतले विलयन के लिए विलेय का मोल अंश लगभग कितना होगा?

If the relative lowering of vapour pressure of a solution is (0.02), what is the approximate mole fraction of the solute for a dilute solution?

Explanation opens after your attempt
Correct Answer

B. (0.02)

Step 1

Concept

अवाष्पशील विलेय के लिए सापेक्ष वाष्प दाब अवनमन विलेय के मोल अंश के बराबर होता है। / For a non-volatile solute, relative lowering of vapour pressure equals the mole fraction of solute.

Step 2

Why this answer is correct

इसलिए \(X_{\text{solute}}\approx0.02\)। / Therefore, \(X_{\text{solute}}\approx0.02\).

Step 3

Exam Tip

राउल्ट नियम के प्रश्नों में पहले देखें कि विलेय अवाष्पशील है या नहीं। / In Raoult's law questions, first check whether the solute is non-volatile.

Open Question Page
Ask Friends

किसी (0.05,M) विलयन का परासरण दाब (0.10,M) यूरिया विलयन के समान है। समान ताप पर उस विलेय का वान्ट हॉफ गुणक क्या होगा?

A (0.05,M) solution has the same osmotic pressure as a (0.10,M) urea solution. At the same temperature, what is the van't Hoff factor of that solute?

Explanation opens after your attempt
Correct Answer

C. (2)

Step 1

Concept

समान ताप पर \(\pi=iCRT\) है। / At the same temperature, \(\pi=iCRT\).

Step 2

Why this answer is correct

यूरिया के लिए \(i=1\), इसलिए अज्ञात के लिए \(i\times0.05=0.10\), अतः \(i=2\)। / For urea \(i=1\), so for the unknown solute \(i\times0.05=0.10\), giving \(i=2\).

Step 3

Exam Tip

समपरासरी विलयनों में (iC) बराबर रखें। / For isotonic solutions, equate (iC).

Open Question Page
Ask Friends

निम्नलिखित में से किस स्थिति में वान्ट हॉफ गुणक \(i\) का मान 1 से कम होने की अपेक्षा है?

In which of the following situations is the van't Hoff factor \(i\) expected to be less than 1?

Explanation opens after your attempt
Correct Answer

C. बेंजीन में बेंजोइक अम्ल का द्वयकीकरणDimerisation of benzoic acid in benzene

Explanation

Simple Explanation

बेंजीन में बेंजोइक अम्ल के अणु द्वयक बनाते हैं; 2 अणु मिलकर 1 कण बनते हैं, इसलिए कणों की संख्या घटती है और \(i<1\) होता है। NaCl का आयनीकरण \(i\) बढ़ाता है। परीक्षा टिप: संघटन में \(i<1\) याद रखें। / Benzoic acid associates to form dimers in benzene: 2 molecules give 1 effective solute particle, so the particle count falls and \(i<1\). Ionisation of NaCl instead increases \(i\). Exam tip: association means \(i<1\).

Open Question Page
Ask Friends

विलयन (A) में (0.1,m) ग्लूकोज और विलयन (B) में (0.1,m) (NaCl) पूर्ण वियोजित है। किसका क्वथनांक अधिक होगा?

Solution (A) contains (0.1,m) glucose and solution (B) contains (0.1,m) completely dissociated (NaCl). Which one will have a higher boiling point?

Explanation opens after your attempt
Correct Answer

B. विलयन (B)Solution (B)

Step 1

Concept

क्वथनांक उन्नयन \(\Delta T_b=iK_bm\) है। / Boiling point elevation is \(\Delta T_b=iK_bm\).

Step 2

Why this answer is correct

ग्लूकोज के लिए \(i=1\), जबकि पूर्ण वियोजित (NaCl) के लिए \(i\approx2\), इसलिए (B) का उन्नयन अधिक होगा। / For glucose \(i=1\), while for completely dissociated (NaCl), \(i\approx2\), so solution (B) has greater elevation.

Step 3

Exam Tip

समान मोललता में बड़े (i) वाला विलयन अधिक क्वथनांक दिखाता है। / At equal molality, the solution with larger (i) shows higher boiling point.

Open Question Page
Ask Friends

यदि विलायक का \(K_f\) अधिक है, तो समान मोललता के अवाष्पशील विलेय के लिए कौन-सा निष्कर्ष सही है?

If a solvent has a higher \(K_f\), which conclusion is correct for the same molality of a non-volatile solute?

Explanation opens after your attempt
Correct Answer

B. हिमांक अवनमन अधिक होगाFreezing point depression will be larger

Step 1

Concept

\(\Delta T_f=K_fm\) अविद्युत् विलेय के लिए लागू होता है। / \(\Delta T_f=K_fm\) applies for a nonelectrolyte.

Step 2

Why this answer is correct

समान (m) पर \(K_f\) जितना अधिक होगा, हिमांक अवनमन उतना अधिक होगा। / At the same (m), larger \(K_f\) gives larger freezing point depression.

Step 3

Exam Tip

स्थिरांक की तुलना वाले प्रश्नों में सूत्र से सीधा अनुपात पहचानें। / In constant-comparison questions, identify direct proportionality from the formula.

Open Question Page
Ask Friends

किसी विलेय का (i=0.5) पाया गया। सबसे संभावित व्याख्या क्या है?

A solute is found to have (i=0.5). What is the most likely explanation?

Explanation opens after your attempt
Correct Answer

B. द्वि-अणुक संघDimer formation

Step 1

Concept

(i<1) बताता है कि प्रभावी कणों की संख्या घट गई है।

Step 2

Why this answer is correct

पूर्ण द्वि-अणुक संघ में दो अणु मिलकर एक कण बनाते हैं, इसलिए (i=0.5) हो सकता है। / In complete dimer formation, two molecules combine into one particle, so (i=0.5) is possible.

Step 3

Exam Tip

(i) का एक से कम होना संघ का मजबूत संकेत है। / A value of (i) less than one strongly indicates association.

Open Question Page
Ask Friends

निम्न में से कौन-सा गुण अणुसंख्य गुण नहीं है?

Which of the following is not a colligative property?

Explanation opens after your attempt
Correct Answer

D. श्यानताViscosity

Step 1

Concept

अणुसंख्य गुण केवल घुले कणों की संख्या पर निर्भर करते हैं। / Colligative properties depend only on the number of dissolved particles.

Step 2

Why this answer is correct

परासरण दाब, हिमांक अवनमन और क्वथनांक उन्नयन इसी श्रेणी में आते हैं, जबकि श्यानता कणों की प्रकृति पर भी निर्भर करती है। / Osmotic pressure, freezing point depression, and boiling point elevation belong to this group, while viscosity also depends on the nature of particles.

Step 3

Exam Tip

परीक्षा में गुणों की सूची रटने के बजाय निर्भरता को पहचानें। / In exams, identify the basis of dependence rather than memorising only names.

Open Question Page
Ask Friends

किसी विलयन में (18,g) ग्लूकोज (1,kg) जल में घुला है। ग्लूकोज का मोलर द्रव्यमान \(180,g,mol^{-1}\) और \(K_f=1.86,K,kg,mol^{-1}\) है। हिमांक अवनमन क्या होगा?

A solution contains (18,g) glucose in (1,kg) water. The molar mass of glucose is \(180,g,mol^{-1}\) and \(K_f=1.86,K,kg,mol^{-1}\). What is the depression in freezing point?

Explanation opens after your attempt
Correct Answer

A. (0.186,K)

Step 1

Concept

ग्लूकोज के मोल \(=\frac{18}{180}=0.1\) हैं। / Moles of glucose \(=\frac{18}{180}=0.1\).

Step 2

Why this answer is correct

(1,kg) जल में मोललता (0.1,m) होगी, इसलिए \(\Delta T_f=1.86\times0.1=0.186,K\)। / In (1,kg) water, molality is (0.1,m), so \(\Delta T_f=1.86\times0.1=0.186,K\).

Step 3

Exam Tip

द्रव्यमान को पहले मोल में बदलना संख्यात्मक प्रश्नों की कुंजी है। / Converting mass into moles first is the key in numerical questions.

Open Question Page
Ask Friends

एक विलयन का हिमांक अवनमन (0.372,K) है। उसी विलायक और समान मोललता पर विलेय पूर्णतः द्वि-अणुक संघ बना ले तो नया हिमांक अवनमन क्या होगा?

A solution has a freezing point depression of (0.372,K). In the same solvent and at the same molality, if the solute completely forms dimers, what will be the new freezing point depression?

Explanation opens after your attempt
Correct Answer

A. (0.186,K)

Step 1

Concept

पूर्ण द्वि-अणुक संघ में \(i=0.5\) होता है। / Complete dimer formation gives \(i=0.5\).

Step 2

Why this answer is correct

हिमांक अवनमन (i) के समानुपाती है, इसलिए नया मान \(0.372\times0.5=0.186,K\) होगा। / Freezing point depression is proportional to (i), so the new value is \(0.372\times0.5=0.186,K\).

Step 3

Exam Tip

संघ में अणुसंख्य प्रभाव घटता है, बढ़ता नहीं। / Association decreases colligative effects, it does not increase them.

Open Question Page
Ask Friends

किस विलयन का परासरण दाब सबसे अधिक होगा, यदि सभी की मोलरता (0.1,M) और ताप समान है तथा वियोजन पूर्ण है?

Which solution will have the highest osmotic pressure if all have molarity (0.1,M), the temperature is the same, and dissociation is complete?

Explanation opens after your attempt
Correct Answer

D. \(Al_2(SO_4)*3\)

Step 1

Concept

समान (C) और (T) पर \(\pi\) केवल (i) पर निर्भर करता है। / At the same (C) and (T), \(\pi\) depends only on (i).

Step 2

Why this answer is correct

\(Al_2(SO_4)*3\) पूर्ण वियोजन पर (5) आयन देता है, जो बाकी विकल्पों से अधिक है। / \(Al_2(SO_4)*3\) gives (5) ions on complete dissociation, more than the other options.

Step 3

Exam Tip

अधिक आयन देने वाला लवण अधिक परासरण दाब दिखाता है। / The salt producing more ions shows higher osmotic pressure.

Open Question Page
Ask Friends

यदि किसी विलयन में विलेय का मोल अंश (0.05) है और विलायक का शुद्ध वाष्प दाब (100,mm) है, तो विलयन का वाष्प दाब लगभग कितना होगा?

If the mole fraction of solute in a solution is (0.05) and the vapour pressure of the pure solvent is (100,mm), what is the approximate vapour pressure of the solution?

Explanation opens after your attempt
Correct Answer

C. (95,mm)

Step 1

Concept

अवाष्पशील विलेय के लिए विलायक का मोल अंश \(1-0.05=0.95\) है। / For a non-volatile solute, mole fraction of solvent is \(1-0.05=0.95\).

Step 2

Why this answer is correct

\(p=X*{\text{solvent}}p^0=0.95\times100=95,mm\)। / \(p=X*{\text{solvent}}p^0=0.95\times100=95,mm\).

Step 3

Exam Tip

राउल्ट नियम में विलायक के मोल अंश का प्रयोग करें, विलेय के नहीं। / In Raoult's law, use the mole fraction of solvent, not solute.

Open Question Page
Ask Friends

किसी विलयन का परासरण दाब मापते समय ताप बढ़ा दिया जाए और सांद्रता समान रहे, तो परासरण दाब पर क्या प्रभाव पड़ेगा?

If temperature is increased while measuring osmotic pressure and concentration remains the same, what happens to the osmotic pressure?

Explanation opens after your attempt
Correct Answer

B. बढ़ेगाIt increases

Step 1

Concept

परासरण दाब \(\pi=CRT\) या \(\pi=iCRT\) से दिया जाता है। / Osmotic pressure is given by \(\pi=CRT\) or \(\pi=iCRT\).

Step 2

Why this answer is correct

सांद्रता समान होने पर \(\pi\) ताप के सीधे समानुपाती है। / At constant concentration, \(\pi\) is directly proportional to temperature.

Step 3

Exam Tip

ताप से जुड़े प्रश्नों में (T) को परम ताप मानकर सोचें। / In temperature-based questions, think of (T) as absolute temperature.

Open Question Page
Ask Friends

किसी अविद्युत् विलेय के (0.2,m) विलयन का \(\Delta T_b\) (0.102,K) है। उसी विलायक में (0.1,m) पूर्ण वियोजित (NaCl) विलयन का \(\Delta T_b\) लगभग कितना होगा?

A (0.2,m) solution of a nonelectrolyte has \(\Delta T_b=0.102,K\). In the same solvent, what will be the approximate \(\Delta T_b\) of a (0.1,m) completely dissociated (NaCl) solution?

Explanation opens after your attempt
Correct Answer

B. (0.102,K)

Step 1

Concept

पहले विलयन के लिए प्रभावी मोललता (0.2) है। / For the first solution, effective molality is (0.2).

Step 2

Why this answer is correct

पूर्ण वियोजित (NaCl) में \(i=2\), इसलिए प्रभावी मोललता \(2\times0.1=0.2\) है। / For completely dissociated (NaCl), \(i=2\), so effective molality is \(2\times0.1=0.2\).

Step 3

Exam Tip

समान विलायक में समान प्रभावी मोललता समान उन्नयन देती है। / In the same solvent, equal effective molality gives equal elevation.

Open Question Page
Ask Friends

निम्न में से कौन-सा विलयन सबसे कम हिमांक रखेगा, यदि सभी की मोललता (0.1,m) है और वियोजन पूर्ण है?

Which solution will have the lowest freezing point if all have molality (0.1,m) and dissociation is complete?

Explanation opens after your attempt
Correct Answer

D. (K_4[Fe(CN)*6])

Step 1

Concept

सबसे कम हिमांक का अर्थ सबसे अधिक हिमांक अवनमन है। / Lowest freezing point means greatest depression in freezing point.

Step 2

Why this answer is correct

(K_4[Fe(CN)*6]) पूर्ण वियोजन पर (5) आयन देता है, इसलिए उसका (i) सबसे अधिक होगा। / (K_4[Fe(CN)*6]) gives (5) ions on complete dissociation, so its (i) is highest.

Step 3

Exam Tip

सबसे अधिक आयन देने वाला समान मोलल विलयन सबसे कम हिमांक दिखाता है। / At equal molality, the solution producing the most ions shows the lowest freezing point.

Open Question Page
Ask Friends

किसी विलयन में विलेय का प्रेक्षित मोलर द्रव्यमान सामान्य मान का आधा है। इसका (i) क्या होगा?

In a solution, the observed molar mass of a solute is half of its normal value. What is its (i)?

Explanation opens after your attempt
Correct Answer

C. (2)

Step 1

Concept

संबंध \(i=\frac{M*{\text{normal}}}{M*{\text{observed}}}\) है। / The relation is \(i=\frac{M*{\text{normal}}}{M*{\text{observed}}}\).

Step 2

Why this answer is correct

प्रेक्षित मोलर द्रव्यमान आधा है, इसलिए \(i=\frac{M}{M/2}=2\)। / Observed molar mass is half, so \(i=\frac{M}{M/2}=2\).

Step 3

Exam Tip

कम प्रेक्षित मोलर द्रव्यमान सामान्यतः वियोजन का संकेत देता है। / A lower observed molar mass usually indicates dissociation.

Open Question Page
Ask Friends

यदि किसी विलयन का हिमांक (271.9,K) है और शुद्ध विलायक का हिमांक (273.0,K) है, तो हिमांक अवनमन कितना है?

If the freezing point of a solution is (271.9,K) and that of the pure solvent is (273.0,K), what is the depression in freezing point?

Explanation opens after your attempt
Correct Answer

A. (1.1,K)

Step 1

Concept

हिमांक अवनमन शुद्ध विलायक और विलयन के हिमांक का अंतर है। / Depression in freezing point is the difference between the freezing point of pure solvent and solution.

Step 2

Why this answer is correct

\(\Delta T_f=273.0-271.9=1.1,K\)। / \(\Delta T_f=273.0-271.9=1.1,K\).

Step 3

Exam Tip

हमेशा बड़ा ताप छोटे ताप से घटाएं, क्योंकि अवनमन धनात्मक लिया जाता है। / Always subtract the lower solution temperature from the pure solvent temperature because depression is taken positive.

Open Question Page
Ask Friends

किसी विलयन में (NaCl) का (75%) वियोजन है। इस विलयन के लिए (i) कितना होगा?

A solution of (NaCl) is (75%) dissociated. What is (i) for this solution?

Explanation opens after your attempt
Correct Answer

C. (1.75)

Step 1

Concept

(NaCl) दो आयन देता है। / (NaCl) gives two ions.

Step 2

Why this answer is correct

\(i=1+\alpha(n-1)=1+0.75(2-1)=1.75\)। / \(i=1+\alpha(n-1)=1+0.75(2-1)=1.75\).

Step 3

Exam Tip

आंशिक वियोजन में (i) एक और कुल आयन संख्या के बीच रहता है। / In partial dissociation, (i) lies between one and the total number of ions.

Open Question Page
Ask Friends

एक अर्धपारगम्य झिल्ली के दोनों ओर दो विलयन रखे गए। बाईं ओर (0.2,M) ग्लूकोज और दाईं ओर (0.1,M) (NaCl) पूर्ण वियोजित है। जल का शुद्ध प्रवाह कैसा होगा?

Two solutions are placed across a semipermeable membrane. The left side has (0.2,M) glucose and the right side has (0.1,M) completely dissociated (NaCl). What will be the net flow of water?

Explanation opens after your attempt
Correct Answer

C. कोई शुद्ध प्रवाह नहींNo net flow

Step 1

Concept

प्रभावी सांद्रता (iC) से तुलना करें। / Compare effective concentration (iC).

Step 2

Why this answer is correct

ग्लूकोज के लिए \(iC=1\times0.2=0.2\), (NaCl) के लिए \(iC=2\times0.1=0.2\)। / For glucose \(iC=1\times0.2=0.2\), and for (NaCl), \(iC=2\times0.1=0.2\).

Step 3

Exam Tip

समान परासरण दाब होने पर जल का कोई शुद्ध प्रवाह नहीं होता। / When osmotic pressures are equal, there is no net flow of water.

Open Question Page
Ask Friends

यदि विलयन का वाष्प दाब शुद्ध विलायक से कम है, तो इसके पीछे मुख्य कारण क्या है?

If the vapour pressure of a solution is lower than that of the pure solvent, what is the main reason?

Explanation opens after your attempt
Correct Answer

A. विलायक अणुओं की सतह पर संख्या घट जाती हैNumber of solvent molecules at the surface decreases

Step 1

Concept

अवाष्पशील विलेय मिलाने पर सतह पर कुछ स्थान विलेय कण घेर लेते हैं। / When a non-volatile solute is added, some surface positions are occupied by solute particles.

Step 2

Why this answer is correct

इससे वाष्प में जाने वाले विलायक अणुओं की संख्या घटती है और वाष्प दाब कम होता है। / This reduces the number of solvent molecules escaping into vapour, so vapour pressure decreases.

Step 3

Exam Tip

वाष्प दाब अवनमन को सतह से निकलने वाले विलायक अणुओं से जोड़कर समझें। / Understand vapour pressure lowering through escaping solvent molecules at the surface.

Open Question Page
Ask Friends

निम्नलिखित में से किस कोलिगेटिव गुण का मान विलयन में विलेय कणों की संख्या बढ़ने पर घटता है?

Which of the following colligative properties decreases as the number of solute particles in a solution increases?

Explanation opens after your attempt
Correct Answer

D. विलायक का वाष्प दाब

Explanation

Simple Explanation

अवाष्पशील विलेय मिलाने पर सतह पर विलायक अणुओं का अंश घटता है, इसलिए विलायक का वाष्प दाब कम होता है। इसके विपरीत सापेक्ष वाष्प-दाब अवनमन, क्वथनांक वृद्धि और हिमांक अवनमन बढ़ते हैं। परीक्षा टिप: घटने वाला गुण स्वयं वाष्प दाब है, उसका अवनमन नहीं। / Adding a non-volatile solute lowers the mole fraction of solvent at the surface, so the solvent vapour pressure decreases. Relative lowering, boiling-point elevation and freezing-point depression increase. Exam tip: distinguish vapour pressure from its lowering.

Open Question Page
Ask Friends

किसी विलेय के (25%) अणु त्रि-अणुक संघ बनाते हैं। उसका वान्ट हॉफ गुणक कितना होगा?

If (25%) molecules of a solute form trimers, what will be its van't Hoff factor?

Explanation opens after your attempt
Correct Answer

C. (0.833)

Step 1

Concept

(75%) अणु अकेले रहेंगे और (25%) अणु त्रि-अणुक कण बनाएंगे। / (75%) molecules remain single and (25%) form trimers.

Step 2

Why this answer is correct

प्रभावी कण \(0.75+\frac{0.25}{3}=0.833\) होंगे, इसलिए \(i\approx0.833\)। / Effective particles \(=0.75+\frac{0.25}{3}=0.833\), so \(i\approx0.833\).

Step 3

Exam Tip

(n)-अणुक संघ में संघित भाग को (n) से भाग दें। / In (n)-mer association, divide the associated fraction by (n).

Open Question Page
Ask Friends

विलयन (A) और (B) में विलेय की समान मात्रा है, पर (A) में विलायक का द्रव्यमान (500,g) और (B) में (1000,g) है। किसका हिमांक अवनमन अधिक होगा?

Solutions (A) and (B) contain the same amount of solute, but (A) has (500,g) solvent and (B) has (1000,g) solvent. Which one will have greater depression in freezing point?

Explanation opens after your attempt
Correct Answer

A. (A)

Step 1

Concept

हिमांक अवनमन मोललता पर निर्भर करता है। / Freezing point depression depends on molality.

Step 2

Why this answer is correct

समान विलेय कम विलायक में अधिक मोललता देगा, इसलिए (A) में \(\Delta T_f\) अधिक होगा। / The same solute in less solvent gives higher molality, so (A) has greater \(\Delta T_f\).

Step 3

Exam Tip

मोललता में विलायक का द्रव्यमान किलोग्राम में लेना याद रखें। / Remember that molality uses mass of solvent in kilograms.

Open Question Page
Ask Friends

उच्च अणुभार वाले प्रोटीनों का मोलर द्रव्यमान ज्ञात करने के लिए निम्नलिखित में से कौन-सा अणुसंख्यक गुण सबसे उपयुक्त है?

Which of the following colligative properties is most suitable for determining the molar mass of high-molar-mass proteins?

Explanation opens after your attempt
Correct Answer

D. परासरण दाबOsmotic pressure

Explanation

Simple Explanation

उच्च अणुभार वाले प्रोटीनों के लिए परासरण दाब उपयुक्त है, क्योंकि अत्यंत तनु विलयन में भी इसका मान मापा जा सकता है और नमूना गर्म नहीं करना पड़ता। क्वथनांक या हिमांक परिवर्तन बहुत छोटा हो सकता है। परीक्षा टिप: बड़े अणुओं के लिए सामान्यतः परासरण दाब चुनें। / Osmotic pressure is suitable for high-molar-mass proteins because it can be measured even for very dilute solutions without heating the sample. Boiling-point elevation or freezing-point depression may be too small to measure accurately. Exam tip: for macromolecules, usually choose osmotic pressure.

Open Question Page
Ask Friends

किस कथन में अणुसंख्य गुणों की सही विशेषता दी गई है?

Which statement gives the correct characteristic of colligative properties?

Explanation opens after your attempt
Correct Answer

B. ये केवल घुले कणों की संख्या पर निर्भर करते हैंThey depend only on number of dissolved particles

Step 1

Concept

अणुसंख्य गुणों में विलेय की रासायनिक प्रकृति मुख्य नहीं होती। / In colligative properties, the chemical nature of solute is not the main factor.

Step 2

Why this answer is correct

इनका मान प्रभावी घुले कणों की संख्या पर निर्भर करता है। / Their value depends on the effective number of dissolved particles.

Step 3

Exam Tip

वियोजन और संघ इसलिए महत्वपूर्ण हैं क्योंकि वे कणों की संख्या बदलते हैं। / Dissociation and association matter because they change the particle count.

Open Question Page
Ask Friends

अत्यन्त तनु विलयन में प्रोटीन जैसे उच्च अणुभार वाले विलेय का अणुभार ज्ञात करने के लिए कौन-सा अणुसंख्यक गुण सबसे उपयुक्त है?

Which colligative property is most suitable for determining the molar mass of a high-molar-mass solute such as a protein in a very dilute solution?

Explanation opens after your attempt
Correct Answer

C. परासरण दाबOsmotic pressure

Explanation

Simple Explanation

परासरण दाब बहुत तनु विलयनों में भी मापने योग्य होता है, इसलिए प्रोटीन का अणुभार ज्ञात करने में उपयोगी है। π = CRT याद रखें; हिमांक या क्वथनांक में परिवर्तन अत्यन्त छोटा हो सकता है। / Osmotic pressure remains measurable even for very dilute protein solutions, so it is preferred for molar-mass determination. Remember π = CRT ; boiling-point or freezing-point changes may be too small to measure accurately.

Open Question Page
Ask Friends

किसी विलयन में (0.1,mol) विलेय (2,kg) विलायक में घुला है। यदि (i=3) है, तो प्रभावी मोललता क्या होगी?

A solution contains (0.1,mol) solute in (2,kg) solvent. If (i=3), what is the effective molality?

Explanation opens after your attempt
Correct Answer

C. (0.15,m)

Step 1

Concept

वास्तविक मोललता \(m=\frac{0.1}{2}=0.05,m\) है। / Actual molality \(m=\frac{0.1}{2}=0.05,m\).

Step 2

Why this answer is correct

प्रभावी मोललता \(im=3\times0.05=0.15,m\)। / Effective molality \(im=3\times0.05=0.15,m\).

Step 3

Exam Tip

पहले वास्तविक मोललता निकालें, फिर वान्ट हॉफ गुणक लगाएं। / First calculate actual molality, then apply the van't Hoff factor.

Open Question Page
Ask Friends

किसी विलयन में अर्धपारगम्य झिल्ली से विलायक का प्रवेश रोकने के लिए लगाया गया न्यूनतम बाहरी दाब क्या कहलाता है?

What is the minimum external pressure applied to stop the entry of solvent through a semipermeable membrane into a solution called?

Explanation opens after your attempt
Correct Answer

B. परासरण दाबOsmotic pressure

Step 1

Concept

परासरण में विलायक कम सांद्रता से अधिक सांद्रता की ओर जाता है। / In osmosis, solvent moves from lower concentration to higher concentration.

Step 2

Why this answer is correct

इस प्रवाह को रोकने के लिए जो न्यूनतम दाब लगाना पड़े वही परासरण दाब है। / The minimum pressure needed to stop this flow is osmotic pressure.

Step 3

Exam Tip

परासरण दाब की परिभाषा को दाब लगाकर प्रवाह रोकने से याद रखें। / Remember osmotic pressure as the pressure required to stop osmosis.

Open Question Page
Ask Friends

किसी विलयन की (0.1,M) सांद्रता पर परासरण दाब (2.46,atm) है। समान ताप पर (0.2,M) सांद्रता करने पर परासरण दाब क्या होगा, यदि विलेय अविद्युत् है?

A nonelectrolyte solution has osmotic pressure (2.46,atm) at concentration (0.1,M). What will be the osmotic pressure at (0.2,M) at the same temperature?

Explanation opens after your attempt
Correct Answer

C. (4.92,atm)

Step 1

Concept

समान ताप पर परासरण दाब सांद्रता के सीधे समानुपाती है। / At the same temperature, osmotic pressure is directly proportional to concentration.

Step 2

Why this answer is correct

सांद्रता दोगुनी होने पर दाब भी दोगुना होगा, इसलिए \(2.46\times2=4.92,atm\)। / When concentration doubles, pressure also doubles, so \(2.46\times2=4.92,atm\).

Step 3

Exam Tip

अनुपात विधि ऐसे प्रश्नों में समय बचाती है। / Ratio method saves time in such questions.

Open Question Page
Ask Friends

यदि \(MgCl_2\) का (50%) वियोजन होता है, तो (i) का मान क्या होगा?

If \(MgCl_2\) undergoes (50%) dissociation, what is the value of (i)?

Explanation opens after your attempt
Correct Answer

B. (2.0)

Step 1

Concept

\(MgCl_2\) कुल (3) आयन दे सकता है। / \(MgCl_2\) can give a total of (3) ions.

Step 2

Why this answer is correct

(i=1+\alpha(n-1)=1+0.5(3-1)=2.0)। / (i=1+\alpha(n-1)=1+0.5(3-1)=2.0).

Step 3

Exam Tip

\(AB_2\) प्रकार के लवणों में (n=3) रखना याद रखें। / For \(AB_2\) type salts, remember to take (n=3).

Open Question Page
Ask Friends

किसी पदार्थ का बेंजीन में प्रेक्षित मोलर द्रव्यमान दोगुना मिला। इससे पदार्थ के बारे में कौन-सा निष्कर्ष सही है?

The observed molar mass of a substance in benzene is found to be double. Which conclusion about the substance is correct?

Explanation opens after your attempt
Correct Answer

B. पदार्थ द्वि-अणुक संघ बनाता हैThe substance forms dimers

Step 1

Concept

प्रेक्षित मोलर द्रव्यमान दोगुना होने का अर्थ (i=0.5) है। / Observed molar mass being double means (i=0.5).

Step 2

Why this answer is correct

(i=0.5) पूर्ण द्वि-अणुक संघ के अनुरूप है। / (i=0.5) corresponds to complete dimer association.

Step 3

Exam Tip

बेंजीन जैसे विलायक में कुछ अम्लों का संघ परीक्षा में अक्सर पूछा जाता है। / Association of some acids in benzene is a common exam idea.

Open Question Page
Ask Friends

निम्न में से कौन-सा संबंध अवाष्पशील विलेय वाले पतले विलयन के लिए सही है?

Which relation is correct for a dilute solution containing a non-volatile solute?

Explanation opens after your attempt
Correct Answer

A. सापेक्ष वाष्प दाब अवनमन \(=\) विलेय का मोल अंशRelative lowering of vapour pressure \(=\) mole fraction of solute

Step 1

Concept

राउल्ट नियम के अनुसार अवाष्पशील विलेय विलायक का वाष्प दाब घटाता है। / According to Raoult's law, a non-volatile solute lowers solvent vapour pressure.

Step 2

Why this answer is correct

पतले विलयन में \(\frac{p^0-p}{p^0}=X*{\text{solute}}\) होता है। / For a dilute solution, \(\frac{p^0-p}{p^0}=X*{\text{solute}}\).

Step 3

Exam Tip

इस संबंध में विलेय का मोल अंश आता है, विलायक का नहीं। / This relation uses mole fraction of solute, not solvent.

Open Question Page
Ask Friends

निम्नलिखित में से किस विलयन के लिए वैन्ट हॉफ गुणांक \(i\) का मान 1 से कम होने की सबसे अधिक संभावना है?

For which of the following solutions is the van’t Hoff factor \(i\) most likely to be less than 1?

Explanation opens after your attempt
Correct Answer

A. बेंजीन में बेंजोइक अम्लBenzoic acid in benzene

Explanation

Simple Explanation

बेंजीन में बेंजोइक अम्ल डाइमर बनाता है, जिससे प्रभावी कणों की संख्या घटती है और \(i<1\) होता है। ग्लूकोज का \(i\) लगभग 1 है। संकेत: संघटन होने पर \(i\) घटता है। / Benzoic acid associates as dimers in benzene, reducing the effective number of particles; hence \(i<1\). Glucose normally has \(i\approx1\). Exam tip: association lowers \(i\).

Open Question Page
Ask Friends

किसी विलयन का (i=1) है। निम्न में से कौन-सी स्थिति इसके लिए सबसे उपयुक्त है?

A solution has (i=1). Which situation is most suitable for it?

Explanation opens after your attempt
Correct Answer

A. विलेय न संघित है न वियोजितSolute is neither associated nor dissociated

Step 1

Concept

(i=1) बताता है कि प्रभावी कणों की संख्या सामान्य मोल संख्या के बराबर है। / (i=1) means the effective number of particles equals the normal number of moles.

Step 2

Why this answer is correct

यह अविद्युत् या ऐसे विलेय के लिए होता है जो न संघ बनाता है और न वियोजित होता है। / This occurs for a nonelectrolyte or a solute that neither associates nor dissociates.

Step 3

Exam Tip

(i=1) को सामान्य अणुसंख्य व्यवहार का संकेत मानें। / Treat (i=1) as normal colligative behaviour.

Open Question Page
Ask Friends

एक विलयन में (5,g) विलेय (100,g) विलायक में घुला है। उसी विलेय की मात्रा (200,g) विलायक में घोलने पर हिमांक अवनमन पर क्या प्रभाव होगा?

A solution contains (5,g) solute in (100,g) solvent. If the same amount of solute is dissolved in (200,g) solvent, what happens to the freezing point depression?

Explanation opens after your attempt
Correct Answer

B. आधा हो जाएगाIt becomes half

Step 1

Concept

हिमांक अवनमन मोललता पर निर्भर करता है। / Freezing point depression depends on molality.

Step 2

Why this answer is correct

विलेय समान है पर विलायक दोगुना हो गया, इसलिए मोललता आधी और \(\Delta T_f\) भी आधा होगा। / The solute is the same but solvent mass is doubled, so molality and \(\Delta T_f\) become half.

Step 3

Exam Tip

विलायक का द्रव्यमान बढ़ने पर सांद्रता घटती है। / Increasing solvent mass lowers concentration.

Open Question Page
Ask Friends

किसी विलयन के लिए \(i=2.5\) और मोललता (0.2,m) है। यदि \(K_f=1.86,K,kg,mol^{-1}\), तो \(\Delta T_f\) क्या होगा?

For a solution, \(i=2.5\) and molality is (0.2,m). If \(K_f=1.86,K,kg,mol^{-1}\), what is \(\Delta T_f\)?

Explanation opens after your attempt
Correct Answer

C. (0.930,K)

Step 1

Concept

सूत्र \(\Delta T_f=iK_fm\) लगाएं। / Use \(\Delta T_f=iK_fm\).

Step 2

Why this answer is correct

\(\Delta T_f=2.5\times1.86\times0.2=0.930,K\)। / \(\Delta T_f=2.5\times1.86\times0.2=0.930,K\).

Step 3

Exam Tip

(i) को भूलना विशेषज्ञ स्तर के प्रश्नों में सबसे सामान्य गलती है। / Forgetting (i) is a common mistake in advanced numerical questions.

Open Question Page
Ask Friends

किसी विलयन में विलेय का मोल अंश बढ़ाने पर सापेक्ष वाष्प दाब अवनमन पर क्या प्रभाव होगा?

What happens to the relative lowering of vapour pressure when the mole fraction of solute is increased in a solution?

Explanation opens after your attempt
Correct Answer

B. बढ़ता हैIt increases

Step 1

Concept

अवाष्पशील विलेय के लिए सापेक्ष वाष्प दाब अवनमन \(X_{\text{solute}}\) के बराबर होता है। / For a non-volatile solute, relative lowering of vapour pressure equals \(X_{\text{solute}}\).

Step 2

Why this answer is correct

विलेय का मोल अंश बढ़ेगा तो यह अवनमन भी बढ़ेगा। / If mole fraction of solute increases, the relative lowering also increases.

Step 3

Exam Tip

राउल्ट नियम आधारित प्रश्नों में सीधे अनुपात को पहचानें। / In Raoult's law questions, identify direct proportionality.

Open Question Page
Ask Friends

निम्न में से कौन-सी जोड़ी समान मोललता पर लगभग समान हिमांक अवनमन देगी, यदि लवण पूर्ण वियोजित हों?

Which pair will give nearly the same freezing point depression at the same molality if the salts are completely dissociated?

Explanation opens after your attempt
Correct Answer

B. (NaCl) और \(KNO_3\)(NaCl) and \(KNO_3\)

Step 1

Concept

समान मोललता पर समान \(\Delta T_f\) के लिए (i) समान होना चाहिए। / At equal molality, equal \(\Delta T_f\) requires equal (i).

Step 2

Why this answer is correct

(NaCl) और \(KNO_3\) दोनों पूर्ण वियोजन पर दो-दो आयन देते हैं, इसलिए \(i\approx2\)। / Both (NaCl) and \(KNO_3\) give two ions on complete dissociation, so \(i\approx2\).

Step 3

Exam Tip

समान प्रभाव के लिए कुल आयनों की संख्या मिलाएं। / Match the total number of ions for equal colligative effect.

Open Question Page
Ask Friends
FAQs

Class 12 Chemistry Quiz FAQs

How many questions are in this quiz?

This level is designed for 50 active questions. Currently 50 questions are available for the selected class and difficulty.

Is there a timer in this quiz?

Yes, the timer uses 25 seconds per question for Expert difficulty and shows the total remaining time on the page.

Can I open each question separately?

Yes, every question has its own SEO-friendly page with answer, explanation and related practice links.