Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects
Concept-wise Practice

molar mass MCQ Questions for Class 12

molar mass se related questions ko ek jagah revise karein. Har question me bilingual content, answer feedback aur explanation available hai.

Practice Questions

314 questions tagged with molar mass.

यदि किसी \(AB_3\) लवण का मापा मोलर द्रव्यमान वास्तविक का आधा है, तो वियोजन की मात्रा कितनी है?

If the observed molar mass of an \(AB_3\) salt is half of the true molar mass, what is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (33.3%)

Step 1

Concept

मापा द्रव्यमान आधा है, इसलिए (i=2)। / The observed mass is half, so (i=2).

Step 2

Why this answer is correct

\(AB_3\) के लिए \(i=1+3\alpha\)। / For \(AB_3\), \(i=1+3\alpha\).

Step 3

Exam Tip

\(2=1+3\alpha\), अतः \(\alpha=\frac{1}{3}\), यानी (33.3%)। / \(2=1+3\alpha\), so \(\alpha=\frac{1}{3}\), or (33.3%).

Open Question Page
Ask Friends

यदि समान मोललता पर एक विलयन का हिमांक अवनमन सामान्य विलेय से (0.6) गुना है, तो मापा मोलर द्रव्यमान वास्तविक का कितना होगा?

If at the same molality a solution has freezing point depression (0.6) times that of a normal solute, what will its observed molar mass be compared with the true molar mass?

Explanation opens after your attempt
Correct Answer

A. (1.67) गुना(1.67) times

Step 1

Concept

प्रभाव का अनुपात (i=0.6) देता है। / The effect ratio gives (i=0.6).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true\(}}{0.6}=1.67M_{\)true}) लगभग। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{0.6}=1.67M_{\)true}) approximately.

Step 3

Exam Tip

कम हिमांक अवनमन अधिक मापा द्रव्यमान बताता है। / A lower freezing point depression indicates a higher observed mass.

Open Question Page
Ask Friends

यदि समान परिस्थितियों में किसी विलेय का परासरण दाब अपेक्षित मान का (0.75) गुना है, तो उसके मापे मोलर द्रव्यमान का वास्तविक से संबंध क्या होगा?

If under identical conditions a solute has osmotic pressure (0.75) times the expected value, how is its observed molar mass related to the true value?

Explanation opens after your attempt
Correct Answer

A. \(\frac{4}{3}\) गुना\(\frac{4}{3}\) times

Step 1

Concept

परासरण दाब का अनुपात (i) देता है, इसलिए (i=0.75)। / The osmotic pressure ratio gives (i), so (i=0.75).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true}}{i})। \(/ (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 3

Exam Tip

\((M_{\)obs\(}=\frac{4}{3}M_{\)true}), इसलिए द्रव्यमान अधिक दिखेगा। \(/ Thus (M_{\)obs\(}=\frac{4}{3}M_{\)true}), so the mass appears higher.

Open Question Page
Ask Friends

\(एक विद्यार्थी ने (i) को (\frac{M_{\)obs\(}}{M_{\)true}}) लिख दिया। इससे किस प्रकार की गलती होगी?

\(A student writes (i) as (\frac{M_{\)obs\(}}{M_{\)true}}). What kind of mistake will this cause?

Explanation opens after your attempt
Correct Answer

A. वियोजन और सहसंयोजन की पहचान उलट सकती हैDissociation and association may be identified oppositely

Step 1

Concept

\(सही संबंध (i=\frac{M_{\)true\(}}{M_{\)obs}}) है। \(/ The correct relation is (i=\frac{M_{\)true\(}}{M_{\)obs}}).

Step 2

Why this answer is correct

अनुपात उलटने से (i>1) और (i<1) की व्याख्या गलत हो सकती है। / Reversing the ratio can reverse the interpretation of (i>1) and (i<1).

Step 3

Exam Tip

सूत्र लिखने से पहले अर्थ समझें। / Understand the meaning before applying the formula.

Open Question Page
Ask Friends

किसी \(AB_2\) विद्युत अपघट्य के लिए मापा मोलर द्रव्यमान वास्तविक का आधा है। वियोजन की मात्रा क्या होगी?

For an \(AB_2\) electrolyte, the observed molar mass is half of the true molar mass. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

\((M_{\)obs\(}=\frac{M_{\)true}}{2}) से (i=2)। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{2}) gives (i=2).\)

Step 2

Why this answer is correct

\(AB_2\) के लिए (n=3), अतः \(2=1+2\alpha\)। / For \(AB_2\), (n=3), so \(2=1+2\alpha\).

Step 3

Exam Tip

\(\alpha=0.5\), इसलिए वियोजन (50%) है। / \(\alpha=0.5\), so dissociation is (50%).

Open Question Page
Ask Friends

यदि विलेय के कण विलयन में जुड़कर बड़े कण बनाते हैं, तो प्रेक्षित दाढ़ द्रव्यमान पर क्या प्रभाव पड़ेगा?

If solute particles combine in solution to form larger particles, what happens to the observed molar mass?

Explanation opens after your attempt
Correct Answer

B. यह बढ़ जाता हैIt increases

Step 1

Concept

कणों के जुड़ने को संघटन कहते हैं। / Combining of particles is called association.

Step 2

Why this answer is correct

संघटन से कुल कणों की संख्या घटती है, इसलिए अणुसंख्य गुणधर्म कम दिखते हैं और प्रेक्षित दाढ़ द्रव्यमान अधिक मिलता है। / Association reduces the total number of particles, so colligative properties appear smaller and observed molar mass becomes larger.

Step 3

Exam Tip

संघटन के लिए याद रखें कि (i<1) होता है। / Remember that for association, (i<1).

Open Question Page
Ask Friends

यदि (i=2) है और प्रेक्षित मोलर द्रव्यमान (40) ग्राम प्रति मोल है तो सामान्य मोलर द्रव्यमान कितना होगा?

If (i=2) and observed molar mass is (40) gram per mole, what is the normal molar mass?

Explanation opens after your attempt
Correct Answer

A. (80) ग्राम प्रति मोल(80) gram per mole

Step 1

Concept

\((i=\frac{\)सामान्य}{प्रेक्षित}) है। \(/ (i=\frac{\)normal}{observed}).

Step 2

Why this answer is correct

\(सामान्य मोलर द्रव्यमान (=i\times\)प्रेक्षित=2\times40=80) ग्राम प्रति मोल। \(/ Normal molar mass (=i\times\)observed\(=2\times40=80) gram per mole.\)

Step 3

Exam Tip

सूत्र को सही दिशा में व्यवस्थित करें। / Rearrange the formula correctly.

Open Question Page
Ask Friends

वांट हॉफ गुणक और मोलर द्रव्यमान के बीच सही संबंध कौन सा है?

Which relation between van't Hoff factor and molar mass is correct?

Explanation opens after your attempt
Correct Answer

A. \((i=\frac{\)सामान्य मोलर द्रव्यमान}{प्रेक्षित मोलर द्रव्यमान})\((i=\frac{\)normal molar mass}{observed molar mass})

Step 1

Concept

वांट हॉफ गुणक सामान्य और प्रेक्षित मोलर द्रव्यमान की तुलना करता है। / The van't Hoff factor compares normal and observed molar mass.

Step 2

Why this answer is correct

सही संबंध में सामान्य मोलर द्रव्यमान ऊपर और प्रेक्षित मोलर द्रव्यमान नीचे होता है। / In the correct relation, normal molar mass is in the numerator and observed molar mass is in the denominator.

Step 3

Exam Tip

सूत्र लिखते समय क्रम उल्टा न करें। / Do not reverse the order in exams.

Open Question Page
Ask Friends

किसी अज्ञात विलेय का मोलर द्रव्यमान निकालते समय सबसे अच्छी परीक्षा रणनीति क्या है?

What is the best exam strategy while determining the molar mass of an unknown solute?

Explanation opens after your attempt
Correct Answer

A. पहले विधि, दी गई राशियाँ, इकाई परिवर्तन और (i) की आवश्यकता जाँचेंFirst check method, given quantities, unit conversion, and need for (i)

Step 1

Concept

मोलर द्रव्यमान के प्रश्नों में विधि के अनुसार अलग सूत्र लगता है। / Different molar mass questions need formulas according to the method used.

Step 2

Why this answer is correct

इकाई, विलेय-विलायक की पहचान और असामान्यता की जाँच से गलती कम होती है। / Checking units, solute-solvent identity, and abnormality reduces mistakes.

Step 3

Exam Tip

पहले योजना बनाकर फिर गणना करें। / Plan the calculation before substituting values.

Open Question Page
Ask Friends

यदि किसी विलयन का सापेक्ष वाष्प दाब अवनमन (0.02) है और विलायक के (1) मोल में विलेय के मोल बहुत कम हैं, तो विलेय का मोल अंश लगभग कितना होगा?

If the relative lowering of vapour pressure of a solution is (0.02) and the solute moles are very small compared with solvent moles, what is the approximate mole fraction of solute?

Explanation opens after your attempt
Correct Answer

A. (0.02)

Step 1

Concept

तनु विलयन में सापेक्ष वाष्प दाब अवनमन विलेय के मोल अंश के बराबर माना जाता है। / In a dilute solution, relative lowering of vapour pressure is approximately equal to mole fraction of solute.

Step 2

Why this answer is correct

इसलिए मोल अंश लगभग (0.02) होगा। / Hence the mole fraction is about (0.02).

Step 3

Exam Tip

तनु विलयन में यह सरल संबंध तेज उत्तर देता है। / Use this simple relation for quick dilute-solution questions.

Open Question Page
Ask Friends

मोलर द्रव्यमान निर्धारण में अवाष्पशील विलेय की शर्त किस विधि में सबसे सीधे जुड़ी है?

In molar mass determination, the condition of a non-volatile solute is most directly connected with which method?

Explanation opens after your attempt
Correct Answer

A. वाष्प दाब अवनमन विधिVapour pressure lowering method

Step 1

Concept

वाष्प दाब अवनमन में माना जाता है कि वाष्प दाब मुख्यतः विलायक से आता है। / Vapour pressure lowering assumes vapour pressure mainly comes from the solvent.

Step 2

Why this answer is correct

इसलिए विलेय का अवाष्पशील होना जरूरी है। / Therefore the solute should be non-volatile.

Step 3

Exam Tip

विधि और उसकी आधारभूत मान्यता को साथ याद करें। / Learn each method together with its basic assumption.

Open Question Page
Ask Friends

यदि किसी पदार्थ का मोलर द्रव्यमान क्रायोस्कोपिक विधि से लगातार अधिक आ रहा है, तो कौन सा परीक्षण विचार उपयोगी होगा?

If a substance repeatedly gives a higher molar mass by the cryoscopic method, which test idea is useful?

Explanation opens after your attempt
Correct Answer

A. देखें कि पदार्थ विलायक में संघटित तो नहीं हो रहाCheck whether the substance is associating in the solvent

Step 1

Concept

अधिक प्रकट मोलर द्रव्यमान कम कण संख्या का संकेत है। / Higher apparent molar mass indicates fewer effective particles.

Step 2

Why this answer is correct

कम कण संख्या अक्सर संघटन से आती है। / Fewer particles often result from association.

Step 3

Exam Tip

लगातार अधिक मान आए तो विलेय-विलायक पारस्परिक क्रिया पर विचार करें। / If the value is consistently high, consider solute-solvent interaction and association.

Open Question Page
Ask Friends

किसी विलयन में विलेय का वास्तविक मोलर द्रव्यमान \(120,g,mol^{-1}\) है और (i=1.5) है। प्रकट मोलर द्रव्यमान क्या होगा?

A solute has true molar mass \(120,g,mol^{-1}\) and (i=1.5). What is the apparent molar mass?

Explanation opens after your attempt
Correct Answer

A. \(80,g,mol^{-1}\)

Step 1

Concept

\((i=\frac{\)वास्तविक मोलर द्रव्यमान}{प्रकट मोलर द्रव्यमान})। \(/ (i=\frac{\)true molar mass}{apparent molar mass}).

Step 2

Why this answer is correct

प्रकट मोलर द्रव्यमान \(=\frac{120}{1.5}=80,g,mol^{-1}\)। / Apparent molar mass \(=\frac{120}{1.5}=80,g,mol^{-1}\).

Step 3

Exam Tip

(i>1) होने पर प्रकट मान वास्तविक से कम होता है। / When (i>1), apparent value is lower than true value.

Open Question Page
Ask Friends

एक छात्र ने परासरण दाब विधि में तापमान \(27^\circ C\) को (27,K) मान लिया। निकला मोलर द्रव्यमान वास्तविक तुलना में कैसा होगा?

A student uses (27,K) instead of \(27^\circ C\) in the osmotic pressure method. How will the calculated molar mass compare with the correct value?

Explanation opens after your attempt
Correct Answer

A. बहुत कम निकलेगाIt will be much lower

Step 1

Concept

सही ताप \(27^\circ C=300,K\) होना चाहिए। / The correct temperature is \(27^\circ C=300,K\).

Step 2

Why this answer is correct

\(M=\frac{wRT}{\pi V}\) में ताप अंश में है, इसलिए (27,K) लेने पर मान बहुत कम आएगा। / In \(M=\frac{wRT}{\pi V}\), temperature is in the numerator, so using (27,K) gives a much lower value.

Step 3

Exam Tip

हमेशा सेल्सियस को केल्विन में बदलें। / Always convert Celsius to kelvin.

Open Question Page
Ask Friends

यदि \(K_b\) का मान गलत रूप से दोगुना ले लिया जाए, तो क्वथनांक उन्नयन सूत्र से निकला मोलर द्रव्यमान कैसे बदलेगा?

If the value of \(K_b\) is mistakenly taken as double, how will the molar mass calculated from boiling point elevation change?

Explanation opens after your attempt
Correct Answer

A. दोगुना हो जाएगाIt will become double

Step 1

Concept

\(M=\frac{K_b w_2 1000}{\Delta T_b w_1}\) में \(K_b\) अंश में है। / In \(M=\frac{K_b w_2 1000}{\Delta T_b w_1}\), \(K_b\) is in the numerator.

Step 2

Why this answer is correct

\(K_b\) दोगुना लेने पर (M) भी दोगुना निकलेगा। / Taking \(K_b\) double makes calculated (M) double.

Step 3

Exam Tip

स्थिरांक की गलत इकाई या गलत मान बड़े उत्तर बदल देता है। / Wrong constants or units can strongly affect final answers.

Open Question Page
Ask Friends

किसी अज्ञात विलेय का मोलर द्रव्यमान सटीक निकालने के लिए एक ही विलयन पर अलग-अलग कोलिगेटिव गुणों से परिणाम मिलान क्यों उपयोगी है?

Why is comparing results from different colligative properties useful for accurately determining the molar mass of an unknown solute?

Explanation opens after your attempt
Correct Answer

A. यह संघटन या वियोजन जैसी असामान्यता का संकेत दे सकता हैIt can indicate abnormality such as association or dissociation

Step 1

Concept

सभी कोलिगेटिव गुण कण संख्या पर आधारित हैं। / All colligative properties are based on particle number.

Step 2

Why this answer is correct

यदि अलग विधियों से बहुत अलग मान मिलें, तो विलेय का व्यवहार सामान्य नहीं हो सकता। / If different methods give very different values, solute behaviour may be abnormal.

Step 3

Exam Tip

तुलना से प्रयोगात्मक त्रुटि और असामान्यता दोनों पकड़ी जा सकती हैं। / Comparison helps detect both experimental error and abnormal association or dissociation.

Open Question Page
Ask Friends

यदि मोलर द्रव्यमान निर्धारण में विलयन बहुत सान्द्र हो, तो सामान्य कोलिगेटिव सूत्रों की विश्वसनीयता क्यों घटती है?

Why does the reliability of simple colligative formulas decrease if the solution is too concentrated during molar mass determination?

Explanation opens after your attempt
Correct Answer

A. क्योंकि कणों के बीच पारस्परिक प्रभाव उपेक्षणीय नहीं रहतेBecause interparticle interactions are no longer negligible

Step 1

Concept

सरल सूत्र आदर्श या लगभग आदर्श तनु विलयनों पर आधारित हैं। / Simple formulas are based on ideal or nearly ideal dilute solutions.

Step 2

Why this answer is correct

सान्द्र विलयन में कणों के बीच प्रभाव बढ़ जाते हैं, इसलिए परिणाम भटक सकता है। / In concentrated solutions, interparticle interactions become significant, so results may deviate.

Step 3

Exam Tip

कोलिगेटिव गणना में तनु विलयन की शर्त याद रखें। / Remember the dilute solution condition in colligative calculations.

Open Question Page
Ask Friends

किसी विलेय के (3) ग्राम को (100) ग्राम विलायक में घोलने पर (0.3,K) हिमांक अवनमन होता है। उसी विलायक में (6) ग्राम विलेय (100) ग्राम विलायक में घोलने पर अवनमन कितना होगा?

(3) g of a solute in (100) g solvent gives (0.3,K) freezing point depression. What will be the depression for (6) g solute in (100) g of the same solvent?

Explanation opens after your attempt
Correct Answer

A. (0.6,K)

Step 1

Concept

विलायक और विलेय समान हैं, इसलिए अवनमन विलेय के द्रव्यमान के सीधे अनुपात में होगा। / With the same solute and solvent mass, depression is directly proportional to solute mass.

Step 2

Why this answer is correct

विलेय दोगुना होने पर अवनमन भी दोगुना होकर (0.6,K) होगा। / Doubling solute mass doubles the depression to (0.6,K).

Step 3

Exam Tip

समान विलायक द्रव्यमान हो तो अनुपात विधि तेज होती है। / Use ratio method for quick exam calculations when solvent mass is unchanged.

Open Question Page
Ask Friends

मोलर द्रव्यमान निर्धारण में किस स्थिति में \(M=\frac{wRT}{\pi V}\) से मिला मान वास्तविक से अधिक होगा?

In molar mass determination, under which condition will the value from \(M=\frac{wRT}{\pi V}\) be higher than the true value?

Explanation opens after your attempt
Correct Answer

A. विलेय का संघटन होने परWhen solute undergoes association

Step 1

Concept

संघटन से प्रभावी कण कम होते हैं। / Association reduces the effective number of particles.

Step 2

Why this answer is correct

परासरण दाब कम मिलता है और सूत्र में \(\pi\) हर में होने से (M) अधिक निकलता है। / Osmotic pressure becomes lower and since \(\pi\) is in the denominator, calculated (M) becomes higher.

Step 3

Exam Tip

कम दाब और अधिक मोलर द्रव्यमान को संघटन से जोड़ें। / Link lower pressure and higher molar mass with association.

Open Question Page
Ask Friends

यदि किसी विलेय का परासरण दाब (i) के कारण बढ़ जाता है, तो मोलर द्रव्यमान के सूत्र में सही रूप क्या होगा?

If osmotic pressure increases due to factor (i), what is the corrected form of the molar mass relation?

Explanation opens after your attempt
Correct Answer

A. \(\pi V=i nRT\)

Step 1

Concept

वान्त हॉफ गुणांक कणों की प्रभावी संख्या को गुणा करता है। / The van't Hoff factor multiplies the effective number of particles.

Step 2

Why this answer is correct

इसलिए परासरण दाब के लिए सही संबंध \(\pi V=i nRT\) है। / Therefore the corrected osmotic pressure relation is \(\pi V=i nRT\).

Step 3

Exam Tip

(i) को सीधे कोलिगेटिव प्रभाव से गुणा करें। / Multiply the colligative effect directly by (i).

Open Question Page
Ask Friends

सापेक्ष वाष्प दाब अवनमन से मोलर द्रव्यमान निकालते समय यदि विलेय भी वाष्पशील हो, तो क्या समस्या होगी?

What problem occurs in molar mass determination by relative lowering of vapour pressure if the solute is also volatile?

Explanation opens after your attempt
Correct Answer

A. वाष्प दाब में योगदान केवल विलायक का नहीं रहेगाVapour pressure contribution will not be only from solvent

Step 1

Concept

सरल राउल्ट नियम में विलेय को अवाष्पशील माना जाता है। / The simple Raoult's law treatment assumes a non-volatile solute.

Step 2

Why this answer is correct

वाष्पशील विलेय स्वयं भी वाष्प दाब में योगदान देगा, जिससे गणना गलत हो सकती है। / A volatile solute also contributes to vapour pressure, causing error in calculation.

Step 3

Exam Tip

विधि की मूल शर्त हमेशा जाँचें। / Always check the basic condition of the method.

Open Question Page
Ask Friends

यदि विलेय के मोलर द्रव्यमान का निर्धारण करते समय विलेय में अशुद्धि हो, तो सामान्यतः क्या प्रभाव पड़ेगा?

If the solute sample contains impurity during molar mass determination, what is the usual effect?

Explanation opens after your attempt
Correct Answer

A. गणना गलत हो सकती है क्योंकि वास्तविक विलेय द्रव्यमान अलग हैCalculation may be wrong because actual solute mass is different

Step 1

Concept

सूत्रों में विलेय का द्रव्यमान शुद्ध विलेय के लिए माना जाता है। / The formulas assume the weighed solute mass is pure solute.

Step 2

Why this answer is correct

अशुद्धि होने पर वास्तविक घुले कणों का द्रव्यमान और संख्या अपेक्षित नहीं रहेगी। / If impurity is present, actual solute mass and particle number differ from expected values.

Step 3

Exam Tip

प्रयोग में शुद्ध नमूना और सही तौल जरूरी है। / Pure sample and accurate weighing are essential in experiments.

Open Question Page
Ask Friends

किसी विलेय के (0.01) मोल को (1) लीटर विलयन में (300,K) पर रखने से परासरण दाब कितना होगा? \(R=0.082,L,atm,K^{-1},mol^{-1}\) लें।

What is the osmotic pressure of (0.01) mol solute in (1) L solution at (300,K)? Take \(R=0.082,L,atm,K^{-1},mol^{-1}\).

Explanation opens after your attempt
Correct Answer

A. (0.246,atm)

Step 1

Concept

\(\pi=\frac{nRT}{V}\) लगाएँ। / Use \(\pi=\frac{nRT}{V}\).

Step 2

Why this answer is correct

\(\pi=\frac{0.01\times0.082\times300}{1}=0.246,atm\)। / \(\pi=\frac{0.01\times0.082\times300}{1}=0.246,atm\).

Step 3

Exam Tip

परासरण दाब में आयतन लीटर में और ताप केल्विन में रखें। / Keep volume in litres and temperature in kelvin for osmotic pressure.

Open Question Page
Ask Friends

एक विलयन में (i=1.8) पाया गया। यदि विलेय दो आयनों में वियोजित हो सकता है, तो वियोजन कैसा है?

A solution has (i=1.8). If the solute can dissociate into two ions, what is the nature of dissociation?

Explanation opens after your attempt
Correct Answer

A. लगभग पूर्ण पर पूर्ण नहींNearly complete but not complete

Step 1

Concept

दो आयनों में पूर्ण वियोजन पर (i=2) होता। / Complete dissociation into two ions would give (i=2).

Step 2

Why this answer is correct

(i=1.8) का अर्थ है वियोजन बहुत अधिक है पर पूर्ण नहीं। / (i=1.8) means dissociation is high but not complete.

Step 3

Exam Tip

(i) को संभावित आयनों की संख्या से तुलना करें। / Compare (i) with the maximum possible number of ions.

Open Question Page
Ask Friends

यदि किसी विलेय का प्रकट मोलर द्रव्यमान विलयन की सांद्रता घटाने पर वास्तविक मान के पास आने लगे, तो क्या संकेत मिलता है?

If the apparent molar mass of a solute approaches the true value on dilution, what does it indicate?

Explanation opens after your attempt
Correct Answer

A. अंतरकणीय प्रभाव कम हो रहे हैंInterparticle effects are decreasing

Step 1

Concept

तनुकरण पर आयनों या अणुओं के बीच की पारस्परिक क्रियाएँ कम होती हैं। / On dilution, interactions among ions or molecules generally decrease.

Step 2

Why this answer is correct

इसलिए असामान्यता घटकर प्रकट मोलर द्रव्यमान वास्तविक मान के करीब आ सकता है। / Therefore abnormality may reduce and apparent molar mass may approach the true value.

Step 3

Exam Tip

सांद्रता बदलने पर विलेय के व्यवहार को भी देखें। / When concentration changes, also examine solute behaviour.

Open Question Page
Ask Friends

समान मोललता वाले दो गैरविद्युत अपघट्य विलयनों में किसका हिमांक अवनमन अधिक होगा?

For two non-electrolyte solutions of the same molality, which one will have greater freezing point depression?

Explanation opens after your attempt
Correct Answer

A. जिस विलायक का \(K_f\) अधिक हैThe one with the solvent having larger \(K_f\)

Step 1

Concept

\(\Delta T_f=K_f m\) है। / \(\Delta T_f=K_f m\).

Step 2

Why this answer is correct

मोललता समान होने पर अवनमन केवल \(K_f\) पर निर्भर करेगा। / If molality is same, depression depends on \(K_f\).

Step 3

Exam Tip

तुलना में स्थिर और बदलती राशि अलग करें। / Separate constant and changing quantities in comparison questions.

Open Question Page
Ask Friends

यदि (1) ग्राम विलेय (100) ग्राम विलायक में (0.1,K) क्वथनांक उन्नयन देता है, और उसी विलायक में (2) ग्राम वही विलेय (200) ग्राम विलायक में घोला जाए, तो उन्नयन कितना होगा?

If (1) g solute in (100) g solvent gives (0.1,K) boiling point elevation, what will be the elevation when (2) g of the same solute is dissolved in (200) g of the same solvent?

Explanation opens after your attempt
Correct Answer

A. (0.1,K)

Step 1

Concept

क्वथनांक उन्नयन मोललता पर निर्भर करता है। / Boiling point elevation depends on molality.

Step 2

Why this answer is correct

विलेय और विलायक दोनों समान अनुपात में बढ़े हैं, इसलिए मोललता समान रहेगी। / Solute and solvent increase in the same ratio, so molality stays the same.

Step 3

Exam Tip

अनुपात समान हो तो कोलिगेटिव प्रभाव भी समान रहता है। / If the ratio is unchanged, the colligative effect remains unchanged.

Open Question Page
Ask Friends

मोलर द्रव्यमान निर्धारण में कोलिगेटिव गुण किस बात पर निर्भर करते हैं?

In molar mass determination, colligative properties depend mainly on what?

Explanation opens after your attempt
Correct Answer

A. विलेय कणों की संख्या परNumber of solute particles

Step 1

Concept

कोलिगेटिव गुण विलेय कणों की संख्या पर निर्भर करते हैं, उनकी प्रकृति पर नहीं। / Colligative properties depend on the number of solute particles, not on their chemical nature.

Step 2

Why this answer is correct

इसी कारण मोलर द्रव्यमान कण संख्या से निकाला जा सकता है। / Therefore molar mass can be determined from particle count.

Step 3

Exam Tip

हर कोलिगेटिव प्रश्न में कण संख्या को केंद्र में रखें। / Keep particle number central in every colligative property question.

Open Question Page
Ask Friends

यदि हिमांक अवनमन को गलती से वास्तविक से कम मापा गया, तो मोलर द्रव्यमान का गणितीय प्रभाव क्या होगा?

If freezing point depression is mistakenly measured lower than its true value, what is the mathematical effect on molar mass?

Explanation opens after your attempt
Correct Answer

A. मोलर द्रव्यमान अधिक निकलेगाMolar mass will be higher

Step 1

Concept

सूत्र में \(\Delta T_f\) हर में आता है। / \(\Delta T_f\) appears in the denominator of the formula.

Step 2

Why this answer is correct

हर छोटा लेने पर निकला मोलर द्रव्यमान अधिक होगा। / Taking a smaller denominator gives a larger calculated molar mass.

Step 3

Exam Tip

ताप अंतर की छोटी गलती भी बड़े उत्तर को प्रभावित कर सकती है। / Small errors in temperature difference can strongly affect the answer.

Open Question Page
Ask Friends

एक प्रयोग में विलायक का द्रव्यमान गलती से वास्तविक से अधिक लिख दिया गया। हिमांक अवनमन सूत्र से निकला मोलर द्रव्यमान किस दिशा में प्रभावित होगा?

In an experiment, the solvent mass is accidentally recorded higher than its actual value. How will the molar mass calculated from freezing point depression be affected?

Explanation opens after your attempt
Correct Answer

B. कम निकलेगाIt will be lower

Step 1

Concept

\(M=\frac{K_f w_2 1000}{\Delta T_f w_1}\) में \(w_1\) हर में है। / In \(M=\frac{K_f w_2 1000}{\Delta T_f w_1}\), \(w_1\) is in the denominator.

Step 2

Why this answer is correct

\(w_1\) अधिक लिखने पर गणना में (M) कम आएगा। / Recording \(w_1\) too high makes calculated (M) lower.

Step 3

Exam Tip

प्रयोगात्मक त्रुटि में सूत्र में राशि की स्थिति देखें। / For experimental errors, check whether the quantity is in numerator or denominator.

Open Question Page
Ask Friends