Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects
Concept-wise Practice

dissociation MCQ Questions for Class 12

dissociation se related questions ko ek jagah revise karein. Har question me bilingual content, answer feedback aur explanation available hai.

Practice Questions

315 questions tagged with dissociation.

एक परीक्षा में किसी छात्र ने (i<1) देखकर वियोजन लिख दिया। सही सुधार क्या होगा?

In an exam, a student sees (i<1) and writes dissociation. What is the correct correction?

Explanation opens after your attempt
Correct Answer

A. (i<1) सहसंयोजन बताता है(i<1) indicates association

Step 1

Concept

(i<1) का अर्थ प्रभावी कण संख्या कम होना है।

Step 2

Why this answer is correct

कण संख्या घटने का कारण सहसंयोजन होता है, वियोजन नहीं। / A decrease in particle count is due to association, not dissociation.

Step 3

Exam Tip

परीक्षा में (i<1) को अधिक मापा मोलर द्रव्यमान से जोड़कर याद रखें। / In exams, connect (i<1) with higher observed molar mass.

Open Question Page
Ask Friends

किसी (1:3) विद्युत अपघट्य का (50%) वियोजन है। (i) कितना होगा?

A (1:3) electrolyte is (50%) dissociated. What will be (i)?

Explanation opens after your attempt
Correct Answer

C. (2.5)

Step 1

Concept

(1:3) विद्युत अपघट्य पूर्ण वियोजन पर चार आयन देता है। / A (1:3) electrolyte gives four ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.50(4-1)=2.5)। / (i=1+0.50(4-1)=2.5).

Step 3

Exam Tip

अनुपात (1:3) का अर्थ कुल (4) आयन है। / The ratio (1:3) means a total of (4) ions.

Open Question Page
Ask Friends

एक \(AB_3\) लवण के (25%) वियोजन पर मापा मोलर द्रव्यमान वास्तविक का कितना भाग होगा?

For (25%) dissociation of an \(AB_3\) salt, what fraction of the true molar mass will be observed?

Explanation opens after your attempt
Correct Answer

A. \(\frac{4}{7}\)

Step 1

Concept

\(AB_3\) चार आयन देता है, इसलिए (i=1+0.25(4-1)=1.75=\frac{7}{4})। / \(AB_3\) gives four ions, so (i=1+0.25(4-1)=1.75=\frac{7}{4}).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true}}{i})। \(/ (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 3

Exam Tip

इसलिए मापा द्रव्यमान \(\frac{4}{7}\) भाग होगा। / So the observed mass is \(\frac{4}{7}\) of the true mass.

Open Question Page
Ask Friends

किसी विलयन में (0.01) मोल \(A_2B_3\) का (60%) वियोजन होता है। प्रभावी कणों के मोल कितने होंगे?

In a solution, (0.01) mol of \(A_2B_3\) undergoes (60%) dissociation. How many moles of effective particles will be present?

Explanation opens after your attempt
Correct Answer

C. (0.034) मोल(0.034) mol

Step 1

Concept

\(A_2B_3\) पूर्ण वियोजन पर पांच आयन देता है, इसलिए (i=1+0.60(5-1)=3.4)। / \(A_2B_3\) gives five ions on complete dissociation, so (i=1+0.60(5-1)=3.4).

Step 2

Why this answer is correct

प्रभावी कणों के मोल \(0.01\times3.4=0.034\) होंगे। / Effective moles of particles \(=0.01\times3.4=0.034\).

Step 3

Exam Tip

पहले (i) निकालें, फिर प्रारंभिक मोल से गुणा करें। / First find (i), then multiply by initial moles.

Open Question Page
Ask Friends

किसी पदार्थ के लिए (i=3.25) है और वह पूर्ण वियोजन पर पांच आयन दे सकता है। वियोजन की मात्रा कितनी होगी?

For a substance, (i=3.25), and it can give five ions on complete dissociation. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (56.25%)

Step 1

Concept

पांच आयन देने वाले विलेय के लिए \(i=1+4\alpha\)। / For a solute producing five ions, \(i=1+4\alpha\).

Step 2

Why this answer is correct

\(3.25=1+4\alpha\), इसलिए \(4\alpha=2.25\)। / \(3.25=1+4\alpha\), so \(4\alpha=2.25\).

Step 3

Exam Tip

\(\alpha=0.5625\), यानी (56.25%)। / \(\alpha=0.5625\), or (56.25%).

Open Question Page
Ask Friends

किसी \(AB_2\) लवण के (i=2.0) होने पर वियोजन प्रतिशत कितना होगा?

For an \(AB_2\) salt, if (i=2.0), what is the percentage dissociation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

\(AB_2\) तीन आयन देता है, इसलिए \(i=1+2\alpha\)। / \(AB_2\) gives three ions, so \(i=1+2\alpha\).

Step 2

Why this answer is correct

\(2=1+2\alpha\), अतः \(\alpha=0.5\)। / \(2=1+2\alpha\), hence \(\alpha=0.5\).

Step 3

Exam Tip

प्रतिशत वियोजन (50%) है। / The percentage dissociation is (50%).

Open Question Page
Ask Friends

किसी विलयन में \(BaCl_2\) का (50%) वियोजन है। (i) कितना होगा?

In a solution, \(BaCl_2\) is (50%) dissociated. What is (i)?

Explanation opens after your attempt
Correct Answer

B. (2.0)

Step 1

Concept

\(BaCl_2\) पूर्ण वियोजन पर तीन आयन देता है। / \(BaCl_2\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.50(3-1)=2.0)। / (i=1+0.50(3-1)=2.0).

Step 3

Exam Tip

दो क्लोराइड आयनों को अलग-अलग कण मानें। / Count the two chloride ions as separate particles.

Open Question Page
Ask Friends

यदि किसी विलेय की परासरण दाब विधि से प्राप्त मोलर द्रव्यमान वास्तविक से कम है, तो कौन सा निष्कर्ष अधिक उचित है?

If the molar mass obtained by osmotic pressure method is lower than the true value, which conclusion is more suitable?

Explanation opens after your attempt
Correct Answer

A. विलेय का वियोजन हुआSolute underwent dissociation

Step 1

Concept

कम मापा मोलर द्रव्यमान बताता है कि (i>1) है। / Lower observed molar mass means (i>1).

Step 2

Why this answer is correct

(i>1) का अर्थ प्रभावी कण संख्या बढ़ना है। / (i>1) means the effective particle count increased.

Step 3

Exam Tip

यह सामान्यतः वियोजन से समझाया जाता है। / This is usually explained by dissociation.

Open Question Page
Ask Friends

किसी \(A_3B\) लवण का (30%) वियोजन है। (i) का मान क्या होगा?

An \(A_3B\) salt is (30%) dissociated. What is the value of (i)?

Explanation opens after your attempt
Correct Answer

B. (1.9)

Step 1

Concept

\(A_3B\) पूर्ण वियोजन पर चार आयन देता है। / \(A_3B\) gives four ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.30(4-1)=1.9)। / (i=1+0.30(4-1)=1.9).

Step 3

Exam Tip

\(A_3B\) में तीन धनायन और एक ऋणायन मिलाकर चार आयन गिनें। / Count three cations and one anion, making four ions in \(A_3B\).

Open Question Page
Ask Friends

यदि किसी पदार्थ का वास्तविक मोलर द्रव्यमान (72,g mol\(^{-1}) है और (i=2.4) है, तो मापा गया मोलर द्रव्यमान कितना होगा\)?

If a substance has true molar mass (72,g mol\(^{-1}) and (i=2.4), what will be the observed molar mass\)?

Explanation opens after your attempt
Correct Answer

A. (30,g mol\(^{-1})\)

Step 1

Concept

\((M_{\)obs\(}=\frac{M_{\)true}}{i}) लगाते हैं। \(/ Use (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{72}{2.4}=30\),g mol^{-1})। \(/ (M_{\)obs\(}=\frac{72}{2.4}=30\),g mol\(^{-1}).\)

Step 3

Exam Tip

(i>1) होने पर मोलर द्रव्यमान कम मापा जाता है। / When (i>1), the molar mass is measured lower.

Open Question Page
Ask Friends

यदि किसी विलेय के लिए (i=2.2) है और वह तीन आयन दे सकता है, तो वियोजन प्रतिशत क्या होगा?

If a solute has (i=2.2) and can produce three ions, what is the percentage dissociation?

Explanation opens after your attempt
Correct Answer

B. (60%)

Step 1

Concept

तीन आयन देने वाले विलेय के लिए \(i=1+2\alpha\)। / For a solute producing three ions, \(i=1+2\alpha\).

Step 2

Why this answer is correct

\(2.2=1+2\alpha\), इसलिए \(2\alpha=1.2\)। / \(2.2=1+2\alpha\), so \(2\alpha=1.2\).

Step 3

Exam Tip

\(\alpha=0.6\), यानी (60%)। / \(\alpha=0.6\), or (60%).

Open Question Page
Ask Friends

यदि किसी \(AB_3\) लवण का मापा मोलर द्रव्यमान वास्तविक का आधा है, तो वियोजन की मात्रा कितनी है?

If the observed molar mass of an \(AB_3\) salt is half of the true molar mass, what is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (33.3%)

Step 1

Concept

मापा द्रव्यमान आधा है, इसलिए (i=2)। / The observed mass is half, so (i=2).

Step 2

Why this answer is correct

\(AB_3\) के लिए \(i=1+3\alpha\)। / For \(AB_3\), \(i=1+3\alpha\).

Step 3

Exam Tip

\(2=1+3\alpha\), अतः \(\alpha=\frac{1}{3}\), यानी (33.3%)। / \(2=1+3\alpha\), so \(\alpha=\frac{1}{3}\), or (33.3%).

Open Question Page
Ask Friends

किसी विलयन में (0.03) मोल विलेय से (0.045) मोल प्रभावी कण बनते हैं। (i) और संभावित व्यवहार क्या है?

In a solution, (0.03) mol solute forms (0.045) mol effective particles. What are (i) and the likely behaviour?

Explanation opens after your attempt
Correct Answer

A. (i=1.5), वियोजन(i=1.5), dissociation

Step 1

Concept

\(i=\frac{0.045}{0.03}=1.5\)। / \(i=\frac{0.045}{0.03}=1.5\).

Step 2

Why this answer is correct

(i>1) बताता है कि प्रभावी कण संख्या बढ़ी है। / (i>1) shows an increase in effective particle number.

Step 3

Exam Tip

कण संख्या बढ़ने का सामान्य कारण वियोजन है। / The usual reason for increased particle number is dissociation.

Open Question Page
Ask Friends

यदि \(Na_2SO_4\) का (90%) वियोजन हो, तो (i) कितना होगा?

If \(Na_2SO_4\) is (90%) dissociated, what will be (i)?

Explanation opens after your attempt
Correct Answer

C. (2.8)

Step 1

Concept

\(Na_2SO_4\) पूर्ण वियोजन पर तीन आयन देता है। / \(Na_2SO_4\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.90(3-1)=2.8)। / (i=1+0.90(3-1)=2.8).

Step 3

Exam Tip

दो सोडियम आयन और एक सल्फेट आयन मिलाकर तीन आयन होते हैं। / Two sodium ions and one sulphate ion make three ions in total.

Open Question Page
Ask Friends

किसी विलेय का वाष्पदाब अवनमन अपेक्षित से (40%) अधिक है। (i) का मान क्या माना जाएगा?

The relative lowering of vapour pressure of a solute is (40%) higher than expected. What value of (i) should be taken?

Explanation opens after your attempt
Correct Answer

B. (1.40)

Step 1

Concept

सहगुणधर्मी प्रभाव का अनुपात (i) बताता है। / The ratio of colligative effects gives (i).

Step 2

Why this answer is correct

(40%) अधिक प्रभाव का अर्थ सामान्य का (1.40) गुना है। / A (40%) higher effect means (1.40) times the normal effect.

Step 3

Exam Tip

इसलिए (i=1.40) होगा। / Therefore, (i=1.40).

Open Question Page
Ask Friends

यदि किसी (1:1) विद्युत अपघट्य का (i=1.72) है, तो वियोजन प्रतिशत कितना है?

If a (1:1) electrolyte has (i=1.72), what is the percentage dissociation?

Explanation opens after your attempt
Correct Answer

C. (72%)

Step 1

Concept

(1:1) विद्युत अपघट्य दो आयन देता है। / A (1:1) electrolyte gives two ions.

Step 2

Why this answer is correct

इसलिए \(i=1+\alpha\), अतः \(\alpha=1.72-1=0.72\)। / Hence \(i=1+\alpha\), so \(\alpha=1.72-1=0.72\).

Step 3

Exam Tip

प्रतिशत वियोजन (72%) होगा। / The percentage dissociation is (72%).

Open Question Page
Ask Friends

एक \(AB_2\) लवण के लिए मापा गया मोलर द्रव्यमान वास्तविक का \(\frac{5}{9}\) है। वियोजन की मात्रा कितनी है?

For an \(AB_2\) salt, the observed molar mass is \(\frac{5}{9}\) of the true molar mass. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (40%)

Step 1

Concept

(M*{obs\(}=\frac{5}{9}M*{\)true}), इसलिए \(i=\frac{9}{5}=1.8\)। / (M*{obs\(}=\frac{5}{9}M*{\)true\(}), so (i=\frac{9}{5}=1.8).\)

Step 2

Why this answer is correct

\(AB_2\) के लिए \(i=1+2\alpha\)। / For \(AB_2\), \(i=1+2\alpha\).

Step 3

Exam Tip

\(1.8=1+2\alpha\), इसलिए \(\alpha=0.4\), यानी (40%)। / \(1.8=1+2\alpha\), so \(\alpha=0.4\), or (40%).

Open Question Page
Ask Friends

किस स्थिति में (i) का मान (1) से बहुत अधिक मिलने की संभावना सबसे अधिक है?

In which situation is (i) most likely to be much greater than (1)?

Explanation opens after your attempt
Correct Answer

A. बहुआयनी लवण का अधिक वियोजनStrong dissociation of a multi-ion salt

Step 1

Concept

(i>1) कण संख्या बढ़ने को दिखाता है। / (i>1) shows an increase in particle number.

Step 2

Why this answer is correct

बहुआयनी लवण अधिक वियोजन पर कई आयन देता है। / A multi-ion salt can give several ions on dissociation.

Step 3

Exam Tip

इसलिए उसका (i) (1) से काफी अधिक हो सकता है। / Therefore its (i) can be much greater than (1).

Open Question Page
Ask Friends

किसी (Al_2\(SO_4\)*3) लवण का (40%) वियोजन माना जाए, तो (i) कितना होगा?

If (Al_2\(SO_4\)*3) is assumed to be (40%) dissociated, what will be (i)?

Explanation opens after your attempt
Correct Answer

B. (2.6)

Step 1

Concept

(Al_2\(SO_4\)*3) पूर्ण वियोजन पर पांच आयन देता है। / (Al_2\(SO_4\)*3) gives five ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.40(5-1)=2.6)। / (i=1+0.40(5-1)=2.6).

Step 3

Exam Tip

बहुआयनी लवण में कुल आयनों की संख्या सही गिनना जरूरी है। / For multi-ion salts, correct ion counting is essential.

Open Question Page
Ask Friends

एक विलयन में \(MgCl_2\) का (85%) वियोजन है। (i) का मान क्या होगा?

In a solution, \(MgCl_2\) is (85%) dissociated. What is the value of (i)?

Explanation opens after your attempt
Correct Answer

A. (2.70)

Step 1

Concept

\(MgCl_2\) पूर्ण वियोजन पर तीन आयन देता है। / \(MgCl_2\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.85(3-1)=2.70)। / (i=1+0.85(3-1)=2.70).

Step 3

Exam Tip

द्विसंयोजी धातु क्लोराइड में दो क्लोराइड आयन जोड़ना न भूलें। / Do not forget the two chloride ions in such salts.

Open Question Page
Ask Friends

किसी \(AB_4\) प्रकार के लवण के लिए (i=3.0) पाया गया। वियोजन की मात्रा कितनी होगी?

For an \(AB_4\)-type salt, (i=3.0) is observed. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

C. (50%)

Step 1

Concept

\(AB_4\) पूर्ण वियोजन पर पांच आयन देता है। / \(AB_4\) gives five ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+\alpha(5-1)), इसलिए \(3=1+4\alpha\)। / (i=1+\alpha(5-1)), so \(3=1+4\alpha\).

Step 3

Exam Tip

\(\alpha=0.5\), यानी (50%) वियोजन। / \(\alpha=0.5\), or (50%) dissociation.

Open Question Page
Ask Friends

एक विलयन में \(A_2B\) का (40%) वियोजन है। समान मोललता पर उसका परासरण दाब सामान्य गैर विद्युत अपघट्य से कितने गुना होगा?

In a solution, \(A_2B\) is (40%) dissociated. At the same molality, how many times will its osmotic pressure be compared with a normal non-electrolyte?

Explanation opens after your attempt
Correct Answer

B. (1.8) गुना(1.8) times

Step 1

Concept

\(A_2B\) पूर्ण वियोजन पर तीन आयन देता है। / \(A_2B\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.40(3-1)=1.8)। / (i=1+0.40(3-1)=1.8).

Step 3

Exam Tip

समान मोललता पर परासरण दाब का अनुपात (i) के बराबर होगा। / At the same molality, the osmotic pressure ratio equals (i).

Open Question Page
Ask Friends

किसी (AB) प्रकार के विद्युत अपघट्य का (35%) वियोजन होता है। उसका (i) मान क्या होगा?

An (AB)-type electrolyte undergoes (35%) dissociation. What will be its (i) value?

Explanation opens after your attempt
Correct Answer

A. (1.35)

Step 1

Concept

(AB) पूर्ण वियोजन पर दो आयन देता है। / (AB) gives two ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+\alpha(n-1)=1+0.35(2-1)=1.35)। / (i=1+\alpha(n-1)=1+0.35(2-1)=1.35).

Step 3

Exam Tip

दो आयन वाले विद्युत अपघट्य के लिए \(i=1+\alpha\) जल्दी उपयोग किया जा सकता है। / For a two-ion electrolyte, \(i=1+\alpha\) can be used quickly.

Open Question Page
Ask Friends

किसी परीक्षा समस्या में (i=1+\alpha(n-1)) दिया है। इस सूत्र का उपयोग कब उचित है?

In an exam problem, (i=1+\alpha(n-1)) is given. When is this formula suitable?

Explanation opens after your attempt
Correct Answer

A. आंशिक वियोजन के लिएFor partial dissociation

Step 1

Concept

इस सूत्र में (n) पूर्ण वियोजन पर बनने वाले कणों की संख्या है। / In this formula, (n) is the number of particles formed on complete dissociation.

Step 2

Why this answer is correct

\(\alpha\) वियोजन की मात्रा बताता है। / \(\alpha\) represents the degree of dissociation.

Step 3

Exam Tip

सहसंयोजन के लिए अलग सूत्र प्रयोग करना चाहिए। / For association, a different expression should be used.

Open Question Page
Ask Friends

एक \(A_2B_3\) लवण का (75%) वियोजन है। (i) कितना होगा?

An \(A_2B_3\) salt is (75%) dissociated. What will be (i)?

Explanation opens after your attempt
Correct Answer

C. (4.0)

Step 1

Concept

\(A_2B_3\) पूर्ण वियोजन पर पांच आयन देता है। / \(A_2B_3\) gives five ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.75(5-1)=1+3=4)। / (i=1+0.75(5-1)=1+3=4).

Step 3

Exam Tip

बड़े आयन संख्या वाले लवणों में (i) तेजी से बढ़ता है। / Salts producing many ions show a rapid increase in (i).

Open Question Page
Ask Friends

यदि किसी \(AB_2\) लवण का हिमांक अवनमन सामान्य गैर विद्युत अपघट्य से (2.4) गुना है, तो वियोजन प्रतिशत क्या है?

If the freezing point depression of an \(AB_2\) salt is (2.4) times that of a normal non-electrolyte, what is the percentage dissociation?

Explanation opens after your attempt
Correct Answer

B. (70%)

Step 1

Concept

प्रभाव का अनुपात (i=2.4) देता है। / The ratio of effects gives (i=2.4).

Step 2

Why this answer is correct

\(AB_2\) के लिए \(i=1+2\alpha\)। / For \(AB_2\), \(i=1+2\alpha\).

Step 3

Exam Tip

\(2.4=1+2\alpha\), इसलिए \(\alpha=0.70\), यानी (70%)। / \(2.4=1+2\alpha\), so \(\alpha=0.70\), or (70%).

Open Question Page
Ask Friends

किसी विलयन में \(AlCl_3\) का (30%) वियोजन है। (i) का मान क्या होगा?

In a solution, \(AlCl_3\) is (30%) dissociated. What is the value of (i)?

Explanation opens after your attempt
Correct Answer

C. (1.9)

Step 1

Concept

\(AlCl_3\) पूर्ण वियोजन पर चार आयन देता है। / \(AlCl_3\) gives four ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.30(4-1)=1.9)। / (i=1+0.30(4-1)=1.9).

Step 3

Exam Tip

\(AlCl_3\) में \(Al^{3+}\) और तीन (Cl^-) मिलाकर चार आयन होते हैं। / \(AlCl_3\) gives one \(Al^{3+}\) and three (Cl^-), making four ions.

Open Question Page
Ask Friends

एक प्रयोग में वाष्पदाब अवनमन सामान्य से (30%) अधिक है। (i) कितना माना जाएगा?

In an experiment, relative lowering of vapour pressure is (30%) greater than normal. What should (i) be taken as?

Explanation opens after your attempt
Correct Answer

C. (1.30)

Step 1

Concept

सहगुणधर्मी गुणों का अनुपात (i) देता है। / The ratio of colligative properties gives (i).

Step 2

Why this answer is correct

(30%) अधिक प्रभाव का अर्थ सामान्य का (1.30) गुना है। / A (30%) greater effect means (1.30) times the normal value.

Step 3

Exam Tip

इसलिए (i=1.30) होगा। / Therefore, (i=1.30).

Open Question Page
Ask Friends

यदि (i=3.4) और विलेय पूर्ण वियोजन पर चार आयन दे सकता है, तो वियोजन प्रतिशत कितना है?

If (i=3.4) and the solute can give four ions on complete dissociation, what is the percentage dissociation?

Explanation opens after your attempt
Correct Answer

C. (80%)

Step 1

Concept

चार आयन देने वाले विलेय के लिए \(i=1+3\alpha\)। / For a solute giving four ions, \(i=1+3\alpha\).

Step 2

Why this answer is correct

\(3.4=1+3\alpha\), इसलिए \(3\alpha=2.4\)। / \(3.4=1+3\alpha\), so \(3\alpha=2.4\).

Step 3

Exam Tip

\(\alpha=0.8\), यानी (80%)। / \(\alpha=0.8\), or (80%).

Open Question Page
Ask Friends

यदि किसी पदार्थ का वास्तविक मोलर द्रव्यमान (90,g mol\(^{-1}) है और मापा गया (45\),g mol\(^{-1}) है, तो (i) और संभावित कारण क्या है\)?

If the true molar mass of a substance is (90,g mol\(^{-1}) and the observed value is (45\),g mol\(^{-1}), what are (i) and the likely cause\)?

Explanation opens after your attempt
Correct Answer

A. (i=2), वियोजन(i=2), dissociation

Step 1

Concept

\(i=\frac{90}{45}=2\)। / \(i=\frac{90}{45}=2\).

Step 2

Why this answer is correct

(i>1) बताता है कि कणों की संख्या बढ़ी है। / (i>1) shows that particle count has increased.

Step 3

Exam Tip

कण संख्या बढ़ने का सामान्य कारण वियोजन है। / The usual reason for increased particle count is dissociation.

Open Question Page
Ask Friends