Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects
Concept-wise Practice

polymer MCQ Questions for Class 12

polymer se related questions ko ek jagah revise karein. Har question me bilingual content, answer feedback aur explanation available hai.

Practice Questions

5 questions tagged with polymer.

किसी बहुलक विलयन में (0.2,g) बहुलक (200,mL) विलयन में है। (300,K) पर परासरण दाब (0.0205,atm) है। \(R=0.082,L,atm,K^{-1},mol^{-1}\) होने पर मोलर द्रव्यमान क्या होगा?

A polymer solution contains (0.2,g) polymer in (200,mL) solution. At (300,K), its osmotic pressure is (0.0205,atm). If \(R=0.082,L,atm,K^{-1},mol^{-1}\), what is the molar mass?

Explanation opens after your attempt
Correct Answer

B. \(1200,g,mol^{-1}\)

Step 1

Concept

(200,mL=0.2,L) करें। / Convert (200,mL=0.2,L).

Step 2

Why this answer is correct

\(M=\frac{0.2\times0.082\times300}{0.0205\times0.2}=1200,g,mol^{-1}\)। / \(M=\frac{0.2\times0.082\times300}{0.0205\times0.2}=1200,g,mol^{-1}\).

Step 3

Exam Tip

बहुत छोटे परासरण दाब का मतलब अक्सर बड़ा मोलर द्रव्यमान होता है। / Very small osmotic pressure often indicates a high molar mass.

Open Question Page
Ask Friends

किसी बहुलक के (0.25,g) से (250,mL) विलयन बनाया गया। (300,K) पर परासरण दाब (0.041,atm) है। \(R=0.082,L,atm,K^{-1},mol^{-1}\) होने पर बहुलक का मोलर द्रव्यमान क्या होगा?

A (250,mL) solution is prepared using (0.25,g) of a polymer. Its osmotic pressure at (300,K) is (0.041,atm). If \(R=0.082,L,atm,K^{-1},mol^{-1}\), what is the molar mass of the polymer?

Explanation opens after your attempt
Correct Answer

B. \(600,g,mol^{-1}\)

Step 1

Concept

(250,mL=0.25,L) करें। / Convert (250,mL=0.25,L).

Step 2

Why this answer is correct

\(M=\frac{0.25\times0.082\times300}{0.041\times0.25}=600,g,mol^{-1}\)। / \(M=\frac{0.25\times0.082\times300}{0.041\times0.25}=600,g,mol^{-1}\).

Step 3

Exam Tip

बहुलकों के लिए परासरण दाब विधि में छोटे दाब को सावधानी से पढ़ें। / For polymers, read the small osmotic pressure value carefully.

Open Question Page
Ask Friends

किसी (0.05,M) बहुलक विलयन का परासरण दाब (300,K) पर कितना होगा, यदि \(R=0.082,L,atm,K^{-1},mol^{-1}\) और (i=1) हो?

What will be the osmotic pressure of a (0.05,M) polymer solution at (300,K), if \(R=0.082,L,atm,K^{-1},mol^{-1}\) and (i=1)?

Explanation opens after your attempt
Correct Answer

B. (1.23,atm)

Step 1

Concept

परासरण दाब के लिए \(\pi=iCRT\) प्रयोग करें। / Use \(\pi=iCRT\) for osmotic pressure.

Step 2

Why this answer is correct

\(\pi=1\times0.05\times0.082\times300=1.23,atm\)। / \(\pi=1\times0.05\times0.082\times300=1.23,atm\).

Step 3

Exam Tip

(i=1) होने पर विलयन सामान्य अविद्युत् जैसा व्यवहार करता है। / When (i=1), the solution behaves like a normal nonelectrolyte.

Open Question Page
Ask Friends

यदि (0.5) ग्राम बहुलक (250,mL) विलयन में (300,K) पर (0.082,atm) परासरण दाब देता है, तो \(R=0.082,L,atm,K^{-1},mol^{-1}\) मानकर मोलर द्रव्यमान क्या है?

If (0.5) g of a polymer gives osmotic pressure (0.082,atm) in (250,mL) solution at (300,K), what is its molar mass using \(R=0.082,L,atm,K^{-1},mol^{-1}\)?

Explanation opens after your attempt
Correct Answer

B. \(600,g,mol^{-1}\)

Step 1

Concept

(250,mL=0.25,L) करें। / Convert (250,mL=0.25,L).

Step 2

Why this answer is correct

\(M=\frac{0.5\times0.082\times300}{0.082\times0.25}=600,g,mol^{-1}\)। / \(M=\frac{0.5\times0.082\times300}{0.082\times0.25}=600,g,mol^{-1}\).

Step 3

Exam Tip

बहुलकों के लिए परासरण दाब विधि में आयतन रूपांतरण बहुत महत्वपूर्ण है। / For polymers, volume conversion is very important in osmotic pressure method.

Open Question Page
Ask Friends

किसी बहुलक का परासरण दाब बहुत छोटा पाया जाता है। उसके मोलर द्रव्यमान के निर्धारण के लिए कौन-सी विधि सबसे उपयुक्त मानी जाती है?

The osmotic pressure of a polymer solution is very small. Which method is considered most suitable for determining its molar mass?

Explanation opens after your attempt
Correct Answer

C. परासरण दाब विधिOsmotic pressure method

Step 1

Concept

बहुलकों का मोलर द्रव्यमान बहुत अधिक होता है, इसलिए उनके विलयनों के अणुसंख्य गुण छोटे होते हैं। / Polymers have very high molar mass, so their colligative effects are small.

Step 2

Why this answer is correct

परासरण दाब कमरे के ताप पर भी मापा जा सकता है और बहुत संवेदनशील होता है। / Osmotic pressure can be measured at room temperature and is relatively sensitive.

Step 3

Exam Tip

बड़े मोलर द्रव्यमान के लिए परासरण दाब विधि को प्राथमिकता दें। / For high molar mass substances, prefer osmotic pressure method.

Open Question Page
Ask Friends