Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects

Class 12 Chemistry - Chapter 01: Solutions - 7: Abnormal Molecular Mass Expert Quiz

Topic Quiz • 150 questions • 25 seconds per question.

Topic question bank 150 Questions
Time Left 02:30 25 sec/question
RewardsCoins + XP
ModeClassic Quiz
Share
Question 1 / 150 0 score
Answered 0/150 Correct 0 Time 02:30

आदर्श विलयन में परासरण दाब से मापा गया मोलर द्रव्यमान वास्तविक मान से आधा आता है। विलेय के कणों के व्यवहार के बारे में सबसे उचित निष्कर्ष क्या है?

In an ideal dilute solution, the molar mass measured from osmotic pressure is half of the true molar mass. What is the most suitable conclusion about the solute particles?

Explanation opens after your attempt
Correct Answer

A. पूर्ण वियोजनComplete dissociation

Step 1

Concept

\(परासरण दाब से (M_{\)obs\(}=\frac{M_{\)true}}{i}) माना जाता है। \(/ From osmotic pressure, (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 2

Why this answer is correct

यदि मापा द्रव्यमान आधा है तो (i=2), यानी कणों की संख्या दोगुनी हुई। / If the observed mass is half, then (i=2), so the number of particles has doubled.

Step 3

Exam Tip

परीक्षा में याद रखें कि कम मोलर द्रव्यमान वियोजन का संकेत देता है। / Remember that a lower observed molar mass usually indicates dissociation.

Open Question Page
Ask Friends

बेंजोइक अम्ल बेंजीन में लगभग द्विगुणित हो जाता है। हिमांक अवनमन से उसका मापा गया मोलर द्रव्यमान वास्तविक द्रव्यमान से कैसा होगा?

Benzoic acid is nearly dimerised in benzene. How will its molar mass measured by depression in freezing point compare with its true molar mass?

Explanation opens after your attempt
Correct Answer

A. लगभग दोगुनाNearly double

Step 1

Concept

द्विगुणन में दो कण मिलकर एक कण बनाते हैं, इसलिए कणों की संख्या घटती है। / In dimerisation, two particles combine to form one particle, so the particle count decreases.

Step 2

Why this answer is correct

\(कणों की संख्या घटने से (i<1) और (M_{\)obs\(}=\frac{M_{\)true}}{i}) बढ़ जाता है। \(/ Because (i<1), (M_{\)obs\(}=\frac{M_{\)true}}{i}) becomes larger.

Step 3

Exam Tip

सहसंयोजन में मापा द्रव्यमान सामान्यतः वास्तविक से अधिक आता है। / Association generally gives a higher observed molar mass.

Open Question Page
Ask Friends

किसी एक-एक विद्युत अपघट्य का (80%) वियोजन हुआ है। उसका वांट हॉफ गुणक कितना होगा?

A (1:1) electrolyte is (80%) dissociated. What will be its van't Hoff factor?

Explanation opens after your attempt
Correct Answer

B. (1.8)

Step 1

Concept

एक-एक विद्युत अपघट्य दो आयन देता है, इसलिए (n=2)। / A (1:1) electrolyte gives two ions, so (n=2).

Step 2

Why this answer is correct

(i=1+\alpha(n-1)=1+0.8(1)=1.8)। / (i=1+\alpha(n-1)=1+0.8(1)=1.8).

Step 3

Exam Tip

वियोजन प्रतिशत को पहले दशमलव में बदलें। / First convert percentage dissociation into decimal form.

Open Question Page
Ask Friends

किसी लवण \(AB_2\) का (60%) वियोजन होता है। पतले विलयन में उसका (i) मान क्या होगा?

A salt \(AB_2\) undergoes (60%) dissociation. What will be its (i) value in dilute solution?

Explanation opens after your attempt
Correct Answer

B. (2.2)

Step 1

Concept

\(AB_2\) वियोजित होकर कुल तीन आयन देता है। / \(AB_2\) dissociates into three ions in total.

Step 2

Why this answer is correct

(i=1+\alpha(n-1)=1+0.6(3-1)=2.2)। / (i=1+\alpha(n-1)=1+0.6(3-1)=2.2).

Step 3

Exam Tip

आयनों की कुल संख्या गिनना सबसे महत्वपूर्ण कदम है। / Counting the total number of ions is the key step.

Open Question Page
Ask Friends

यदि किसी विलेय के लिए (i=0.5) पाया जाता है, तो उसके कणों के बारे में कौन सा कथन सही है?

If (i=0.5) is found for a solute, which statement about its particles is correct?

Explanation opens after your attempt
Correct Answer

A. लगभग द्विगुणन हुआ हैNearly dimerisation occurs

Step 1

Concept

(i<1) का अर्थ है कि विलयन में प्रभावी कणों की संख्या घट गई है।

Step 2

Why this answer is correct

(i=0.5) पूर्ण द्विगुणन के बहुत निकट है। / (i=0.5) is the limiting value for complete dimerisation.

Step 3

Exam Tip

(i) का मान एक से कम मिले तो सहसंयोजन सोचें। / Whenever (i) is less than one, think of association.

Open Question Page
Ask Friends

एक पदार्थ का वास्तविक मोलर द्रव्यमान (120,g mol\(^{-1}) है और हिमांक विधि से मापा गया द्रव्यमान (180\),g mol^{-1}) है। (i) का मान क्या होगा?

A substance has true molar mass (120,g mol\(^{-1}), while the molar mass measured by freezing point method is (180\),g mol\(^{-1}). What is the value of (i)\)?

Explanation opens after your attempt
Correct Answer

A. (0.67)

Step 1

Concept

\(संबंध (i=\frac{M_{\)true\(}}{M_{\)obs}}) लगाते हैं। \(/ Use (i=\frac{M_{\)true\(}}{M_{\)obs}}).

Step 2

Why this answer is correct

\(i=\frac{120}{180}=0.67\) लगभग। / \(i=\frac{120}{180}=0.67\) approximately.

Step 3

Exam Tip

वास्तविक को मापे गए द्रव्यमान से भाग देना न भूलें। / Do not reverse the fraction while calculating (i).

Open Question Page
Ask Friends

यदि \(K_f\) सही है, द्रव्यमान सही है और फिर भी हिमांक अवनमन अपेक्षा से अधिक मिलता है, तो असामान्य मोलर द्रव्यमान का सबसे संभावित कारण क्या है?

If \(K_f\) is correct, masses are correct, and yet the depression in freezing point is greater than expected, what is the most likely cause of abnormal molar mass?

Explanation opens after your attempt
Correct Answer

A. विलेय का वियोजनDissociation of solute

Step 1

Concept

अधिक हिमांक अवनमन का अर्थ है कि प्रभावी कणों की संख्या अधिक है। / A larger depression means more effective solute particles are present.

Step 2

Why this answer is correct

कणों की संख्या बढ़ने का मुख्य कारण वियोजन है। / More particles usually come from dissociation.

Step 3

Exam Tip

अधिक सहगुणधर्मी प्रभाव से मोलर द्रव्यमान कम निकलेगा। / Larger colligative effect leads to a lower observed molar mass.

Open Question Page
Ask Friends

किसी विलेय के द्विगुणन की मात्रा (40%) है। उसके लिए (i) का मान क्या होगा?

A solute undergoes (40%) dimerisation. What is its value of (i)?

Explanation opens after your attempt
Correct Answer

B. (0.80)

Step 1

Concept

द्विगुणन में \(i=1-\frac{\alpha}{2}\) होता है। / For dimerisation, \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(\alpha=0.40\) रखने पर (i=1-0.20=0.80)। / With \(\alpha=0.40\), (i=1-0.20=0.80).

Step 3

Exam Tip

सहसंयोजन में (i) एक से कम रहता है। / Association always makes (i) less than one.

Open Question Page
Ask Friends

यदि (AB) का (50%) वियोजन होकर (A^+) और (B^-) बनते हैं, तो मापा गया मोलर द्रव्यमान वास्तविक द्रव्यमान का कितना होगा?

If (AB) is (50%) dissociated into (A^+) and (B^-), what fraction of the true molar mass will be observed?

Explanation opens after your attempt
Correct Answer

A. दो तिहाईTwo-third

Step 1

Concept

(AB) दो आयन देता है, इसलिए \(i=1+\alpha=1.5\)। / (AB) gives two ions, so \(i=1+\alpha=1.5\).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true\(}}{i}=\frac{2}{3}M_{\)true})। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{i}=\frac{2}{3}M_{\)true}).

Step 3

Exam Tip

वियोजन में मोलर द्रव्यमान घटा हुआ दिखता है। / Dissociation makes observed molar mass smaller.

Open Question Page
Ask Friends

एक सहगुणधर्मी गुण से (i=3) मिला। यदि विलेय \(AlCl_3\) जैसा चार आयन देने वाला पदार्थ है, तो वियोजन की मात्रा कितनी होगी?

A colligative property gives (i=3). If the solute behaves like \(AlCl_3\), producing four ions on complete dissociation, what is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

C. (66.7%)

Step 1

Concept

चार आयनों के लिए (n=4)। / For four ions, (n=4).

Step 2

Why this answer is correct

(i=1+\alpha(n-1)), इसलिए \(3=1+3\alpha\), अतः \(\alpha=\frac{2}{3}\)। / (i=1+\alpha(n-1)), so \(3=1+3\alpha\), giving \(\alpha=\frac{2}{3}\).

Step 3

Exam Tip

अंतिम उत्तर को प्रतिशत में बदलें। / Convert the final value into percentage.

Open Question Page
Ask Friends

निम्न में से कौन सा प्रेक्षण सहसंयोजन के कारण असामान्य मोलर द्रव्यमान को सबसे अच्छे ढंग से दिखाता है?

Which observation best represents abnormal molar mass caused by association?

Explanation opens after your attempt
Correct Answer

A. परासरण दाब अपेक्षा से कमOsmotic pressure lower than expected

Step 1

Concept

सहसंयोजन में कई कण मिलकर कम कण बनाते हैं। / In association, many particles combine and reduce the effective particle count.

Step 2

Why this answer is correct

कम कणों के कारण परासरण दाब जैसे गुण अपेक्षा से कम मिलते हैं। / Due to fewer particles, osmotic pressure becomes lower than expected.

Step 3

Exam Tip

कम सहगुणधर्मी प्रभाव का अर्थ अधिक मापा मोलर द्रव्यमान है। / Lower colligative effect means higher observed molar mass.

Open Question Page
Ask Friends

यदि किसी विलेय के (i) का मान (1.25) है और वह दो आयनों में वियोजित होता है, तो वियोजन की मात्रा कितनी है?

If a solute has (i=1.25) and dissociates into two ions, what is its degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (25%)

Step 1

Concept

दो आयनों के लिए \(i=1+\alpha\)। / For two ions, \(i=1+\alpha\).

Step 2

Why this answer is correct

\(1.25=1+\alpha\), इसलिए \(\alpha=0.25\)। / \(1.25=1+\alpha\), so \(\alpha=0.25\).

Step 3

Exam Tip

\(\alpha\) को (100) से गुणा करके प्रतिशत पाएं। / Multiply \(\alpha\) by (100) to get percentage.

Open Question Page
Ask Friends

एक विलेय का उबलांक वृद्धि प्रयोग में मापा गया द्रव्यमान वास्तविक से तीन गुना है। यह किस प्रकार के कण परिवर्तन के अधिक निकट है?

In a boiling point elevation experiment, the observed molar mass of a solute is three times its true molar mass. Which particle change is it closest to?

Explanation opens after your attempt
Correct Answer

A. त्रिगुणनTrimerisation

Step 1

Concept

\((M_{\)obs\(}=3M_{\)true}) से \(i=\frac{1}{3}\) मिलता है। \(/ (M_{\)obs\(}=3M_{\)true\(}) gives (i=\frac{1}{3}).\)

Step 2

Why this answer is correct

\(i=\frac{1}{3}\) का सीमांत मान तीन कणों के मिलकर एक बनने से जुड़ा है। / This limiting value matches three particles associating into one.

Step 3

Exam Tip

मोलर द्रव्यमान कई गुना अधिक हो तो सहसंयोजन की संख्या सोचें। / If observed molar mass is many times higher, identify the association number.

Open Question Page
Ask Friends

किसी गैर विद्युत अपघट्य में न सहसंयोजन है न वियोजन। उसके लिए (i) का मान क्या होगा?

For a non-electrolyte with neither association nor dissociation, what is the value of (i)?

Explanation opens after your attempt
Correct Answer

C. (1)

Step 1

Concept

सामान्य गैर विद्युत अपघट्य विलयन में कण संख्या नहीं बदलता। / A normal non-electrolyte does not change particle number in solution.

Step 2

Why this answer is correct

जब कण संख्या समान रहती है तो (i=1) होता है। / When the number of particles remains unchanged, (i=1).

Step 3

Exam Tip

असामान्यता तभी आती है जब कण संख्या बदले। / Abnormality appears only when the effective particle count changes.

Open Question Page
Ask Friends

\(यदि (K_b) विधि से मोलर द्रव्यमान (40\),g mol\(^{-1}) आता है जबकि वास्तविक (58.5\),g mol\(^{-1}) है, तो सबसे उचित कारण क्या है\)?

\(If the (K_b) method gives molar mass (40\),g mol\(^{-1}) while the true value is (58.5\),g mol\(^{-1}), what is the most suitable reason\)?

Explanation opens after your attempt
Correct Answer

A. वियोजनDissociation

Step 1

Concept

मापा मोलर द्रव्यमान वास्तविक से कम है। / The observed molar mass is lower than the true value.

Step 2

Why this answer is correct

कम मोलर द्रव्यमान का अर्थ है कि सहगुणधर्मी प्रभाव अपेक्षा से अधिक है। / This means the colligative effect is larger than expected.

Step 3

Exam Tip

ऐसा सामान्यतः वियोजन के कारण होता है। / Such behaviour is generally due to dissociation.

Open Question Page
Ask Friends

एक अम्ल बेंजीन में हाइड्रोजन बंध के कारण द्विगुणित होता है। किस कथन में सही प्रभाव दिया गया है?

An acid dimerises in benzene due to hydrogen bonding. Which statement gives the correct effect?

Explanation opens after your attempt
Correct Answer

A. (i<1) और मोलर द्रव्यमान अधिक(i<1) and molar mass higher

Step 1

Concept

हाइड्रोजन बंध से दो अम्ल अणु मिल सकते हैं। / Hydrogen bonding can join two acid molecules.

Step 2

Why this answer is correct

इससे कणों की संख्या घटती है और (i<1) होता है। / This lowers the particle count and makes (i<1).

Step 3

Exam Tip

(i<1) होने पर मापा मोलर द्रव्यमान बढ़ा हुआ मिलता है। / When (i<1), observed molar mass becomes higher.

Open Question Page
Ask Friends

किसी लवण \(A_2B\) का (25%) वियोजन है। (i) का मान ज्ञात करें।

A salt \(A_2B\) is (25%) dissociated. Find the value of (i).

Explanation opens after your attempt
Correct Answer

B. (1.50)

Step 1

Concept

\(A_2B\) पूर्ण वियोजन पर तीन आयन देता है। / \(A_2B\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.25(3-1)=1.50)। / (i=1+0.25(3-1)=1.50).

Step 3

Exam Tip

सूत्र में (n-1) लेना है, केवल (n) नहीं। / Use (n-1) in the formula, not just (n).

Open Question Page
Ask Friends

\(यदि किसी विलेय के लिए (M_{\)obs\(}>M_{\)true}), तो (i) के बारे में कौन सा कथन सही है?

\(If (M_{\)obs\(}>M_{\)true}) for a solute, which statement about (i) is correct?

Explanation opens after your attempt
Correct Answer

A. (i<1)

Step 1

Concept

\((i=\frac{M_{\)true\(}}{M_{\)obs}}) होता है। \(/ (i=\frac{M_{\)true\(}}{M_{\)obs}}).

Step 2

Why this answer is correct

जब हर बड़ा हो तो अनुपात एक से कम आता है। / If the denominator is larger, the ratio is less than one.

Step 3

Exam Tip

(i<1) सहसंयोजन का संकेत देता है।

Open Question Page
Ask Friends

किसी \(AB_3\) लवण के लिए (i=2.5) पाया गया। वियोजन की मात्रा कितनी है?

For an \(AB_3\) salt, (i=2.5) is observed. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

\(AB_3\) चार आयन देता है, अतः (n=4)। / \(AB_3\) gives four ions, so (n=4).

Step 2

Why this answer is correct

(2.5=1+\alpha(4-1)), इसलिए \(\alpha=0.5\)। / (2.5=1+\alpha(4-1)), so \(\alpha=0.5\).

Step 3

Exam Tip

ऐसे प्रश्नों में पहले कुल आयन गिनें। / Always count total ions before using the formula.

Open Question Page
Ask Friends

समान मोललता वाले चार विलयनों में कौन सा अधिकतम हिमांक अवनमन देगा, यदि वियोजन पूर्ण माना जाए?

Among four solutions of equal molality, which will give the maximum depression in freezing point if dissociation is complete?

Explanation opens after your attempt
Correct Answer

D. \(AlCl_3\)

Step 1

Concept

समान मोललता पर हिमांक अवनमन (i) पर निर्भर करता है। / At equal molality, depression in freezing point depends on (i).

Step 2

Why this answer is correct

पूर्ण वियोजन में \(AlCl_3\) चार आयन देता है, जो सबसे अधिक है। / On complete dissociation, \(AlCl_3\) gives four ions, the highest among the options.

Step 3

Exam Tip

अधिक आयन संख्या का अर्थ अधिक सहगुणधर्मी प्रभाव है। / More ions mean a larger colligative effect.

Open Question Page
Ask Friends

यदि (0.01) मोल विद्युत अपघट्य जल में घुलकर (0.024) मोल प्रभावी कण देता है, तो (i) कितना होगा?

If (0.01) mol of an electrolyte gives (0.024) mol of effective particles in water, what is (i)?

Explanation opens after your attempt
Correct Answer

C. (2.4)

Step 1

Concept

(i) प्रभावी कणों के मोल और प्रारंभिक विलेय मोल का अनुपात है। / (i) is the ratio of effective moles of particles to initial moles of solute.

Step 2

Why this answer is correct

\(i=\frac{0.024}{0.01}=2.4\)। / \(i=\frac{0.024}{0.01}=2.4\).

Step 3

Exam Tip

कणों के अनुपात से (i) सीधे निकाला जा सकता है। / You can calculate (i) directly from particle ratio.

Open Question Page
Ask Friends

किस स्थिति में राउल्ट नियम आधारित मोलर द्रव्यमान वास्तविक से कम मिलने की संभावना अधिक है?

In which situation is Raoult's law based molar mass most likely to be lower than the true value?

Explanation opens after your attempt
Correct Answer

A. विलेय आयनों में टूटता हैSolute breaks into ions

Step 1

Concept

राउल्ट नियम से वाष्पदाब अवनमन कण संख्या पर निर्भर करता है। / Raoult's law based relative lowering of vapour pressure depends on particle count.

Step 2

Why this answer is correct

वियोजन से कण संख्या बढ़ती है, इसलिए प्रभाव अधिक हो जाता है। / Dissociation increases the number of particles, so the effect becomes larger.

Step 3

Exam Tip

अधिक प्रभाव से निकला मोलर द्रव्यमान कम आता है। / A larger effect gives a lower observed molar mass.

Open Question Page
Ask Friends

किसी विलेय का (75%) द्विगुणन है। (i) का मान कितना होगा?

A solute is (75%) dimerised. What is the value of (i)?

Explanation opens after your attempt
Correct Answer

A. (0.625)

Step 1

Concept

द्विगुणन के लिए \(i=1-\frac{\alpha}{2}\)। / For dimerisation, \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(\alpha=0.75\), इसलिए (i=1-0.375=0.625)। / With \(\alpha=0.75\), (i=1-0.375=0.625).

Step 3

Exam Tip

सहसंयोजन की मात्रा बढ़ेगी तो (i) घटेगा। / A higher degree of association lowers (i).

Open Question Page
Ask Friends

यदि प्रयोग में (i=1.9) मिलता है और पदार्थ (NaCl) जैसा दो आयन देता है, तो सबसे सही निष्कर्ष क्या है?

If an experiment gives (i=1.9) and the substance behaves like (NaCl), producing two ions, what is the best conclusion?

Explanation opens after your attempt
Correct Answer

A. लगभग पूर्ण वियोजनNearly complete dissociation

Step 1

Concept

दो आयनों वाले पदार्थ के लिए अधिकतम (i=2) हो सकता है। / For a two-ion electrolyte, the maximum (i) is (2).

Step 2

Why this answer is correct

(i=1.9) इस अधिकतम के बहुत निकट है। / (i=1.9) is very close to this limit.

Step 3

Exam Tip

इसका अर्थ लगभग पूर्ण वियोजन है, पूरी तरह सामान्य व्यवहार नहीं। / It indicates nearly complete dissociation, not normal behaviour.

Open Question Page
Ask Friends

किसी (1:1) विद्युत अपघट्य के लिए मोलर द्रव्यमान वास्तविक का (0.8) गुना मिला। वियोजन की मात्रा क्या होगी?

For a (1:1) electrolyte, the observed molar mass is (0.8) times the true molar mass. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (25%)

Step 1

Concept

\((M_{\)obs\(}=0.8M_{\)true}), अतः \(i=\frac{1}{0.8}=1.25\)। \(/ (M_{\)obs\(}=0.8M_{\)true\(}), so (i=\frac{1}{0.8}=1.25).\)

Step 2

Why this answer is correct

(1:1) विद्युत अपघट्य के लिए \(i=1+\alpha\)। / For a (1:1) electrolyte, \(i=1+\alpha\).

Step 3

Exam Tip

\(\alpha=0.25\), यानी (25%)। / Therefore \(\alpha=0.25\), or (25%).

Open Question Page
Ask Friends

यदि किसी विलेय के लिए वाष्पदाब अवनमन अपेक्षा से आधा मिलता है, तो (i) लगभग कितना होगा?

If the relative lowering of vapour pressure for a solute is found to be half of the expected value, what is (i) approximately?

Explanation opens after your attempt
Correct Answer

A. (0.5)

Step 1

Concept

सहगुणधर्मी गुणों का मान (i) के समानुपाती होता है। / Colligative properties are proportional to (i).

Step 2

Why this answer is correct

यदि प्रभाव आधा है, तो (i) भी लगभग (0.5) होगा। / If the effect is half the expected value, (i) is approximately (0.5).

Step 3

Exam Tip

कम प्रभाव सहसंयोजन की ओर संकेत करता है। / A reduced effect suggests association.

Open Question Page
Ask Friends

कौन सा कथन असामान्य मोलर द्रव्यमान और सहगुणधर्मी गुणों के संबंध को सही बताता है?

Which statement correctly relates abnormal molar mass with colligative properties?

Explanation opens after your attempt
Correct Answer

A. ये गुण कण संख्या पर निर्भर करते हैंThese properties depend on particle number

Step 1

Concept

सहगुणधर्मी गुण विलेय कणों की संख्या पर निर्भर करते हैं, कण की पहचान पर नहीं। / Colligative properties depend on the number of solute particles, not their identity.

Step 2

Why this answer is correct

वियोजन या सहसंयोजन कण संख्या बदल देता है। / Dissociation or association changes this number.

Step 3

Exam Tip

इसी कारण मोलर द्रव्यमान असामान्य निकल सकता है। / Therefore the calculated molar mass can become abnormal.

Open Question Page
Ask Friends

एक पदार्थ (X) जल में \(X \rightarrow 2Y+Z\) के अनुसार (40%) वियोजित होता है। (i) का मान क्या होगा?

A substance (X) dissociates in water as \(X \rightarrow 2Y+Z\) to the extent of (40%). What is (i)?

Explanation opens after your attempt
Correct Answer

B. (1.8)

Step 1

Concept

एक (X) से कुल तीन कण बनते हैं, अतः (n=3)। / One (X) gives three particles, so (n=3).

Step 2

Why this answer is correct

(i=1+\alpha(n-1)=1+0.4(2)=1.8)। / (i=1+\alpha(n-1)=1+0.4(2)=1.8).

Step 3

Exam Tip

समीकरण में बने कुल कण गिनें, केवल अलग प्रकार नहीं। / Count total particles formed, not just different types.

Open Question Page
Ask Friends

यदि किसी विलेय में अर्ध सहसंयोजन होकर दो अणु एक बनने की प्रक्रिया (50%) तक होती है, तो मापा मोलर द्रव्यमान वास्तविक का कितना गुना होगा?

If a solute undergoes (50%) dimerisation, how many times the true molar mass will be observed?

Explanation opens after your attempt
Correct Answer

A. \(\frac{4}{3}\) गुना\(\frac{4}{3}\) times

Step 1

Concept

(50%) द्विगुणन के लिए \(i=1-\frac{0.5}{2}=0.75\)। / For (50%) dimerisation, \(i=1-\frac{0.5}{2}=0.75\).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true\(}}{0.75}=\frac{4}{3}M_{\)true})। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{0.75}=\frac{4}{3}M_{\)true}).

Step 3

Exam Tip

सहसंयोजन में द्रव्यमान का गुणक (1/i) होता है। / In association, the mass factor is (1/i).

Open Question Page
Ask Friends

किसी \(AB_2\) विद्युत अपघट्य के लिए मापा मोलर द्रव्यमान वास्तविक का आधा है। वियोजन की मात्रा क्या होगी?

For an \(AB_2\) electrolyte, the observed molar mass is half of the true molar mass. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

\((M_{\)obs\(}=\frac{M_{\)true}}{2}) से (i=2)। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{2}) gives (i=2).\)

Step 2

Why this answer is correct

\(AB_2\) के लिए (n=3), अतः \(2=1+2\alpha\)। / For \(AB_2\), (n=3), so \(2=1+2\alpha\).

Step 3

Exam Tip

\(\alpha=0.5\), इसलिए वियोजन (50%) है। / \(\alpha=0.5\), so dissociation is (50%).

Open Question Page
Ask Friends

\(एक विद्यार्थी ने (i) को (\frac{M_{\)obs\(}}{M_{\)true}}) लिख दिया। इससे किस प्रकार की गलती होगी?

\(A student writes (i) as (\frac{M_{\)obs\(}}{M_{\)true}}). What kind of mistake will this cause?

Explanation opens after your attempt
Correct Answer

A. वियोजन और सहसंयोजन की पहचान उलट सकती हैDissociation and association may be identified oppositely

Step 1

Concept

\(सही संबंध (i=\frac{M_{\)true\(}}{M_{\)obs}}) है। \(/ The correct relation is (i=\frac{M_{\)true\(}}{M_{\)obs}}).

Step 2

Why this answer is correct

अनुपात उलटने से (i>1) और (i<1) की व्याख्या गलत हो सकती है। / Reversing the ratio can reverse the interpretation of (i>1) and (i<1).

Step 3

Exam Tip

सूत्र लिखने से पहले अर्थ समझें। / Understand the meaning before applying the formula.

Open Question Page
Ask Friends

कौन सा युग्म सही ढंग से मेल खाता है?

Which pair is correctly matched?

Explanation opens after your attempt
Correct Answer

A. वियोजन: (i>1)Dissociation: (i>1)

Step 1

Concept

वियोजन में एक कण से अधिक कण बनते हैं। / In dissociation, one particle produces more particles.

Step 2

Why this answer is correct

इसलिए प्रभावी कण संख्या बढ़ती है और (i>1) होता है। / Hence the effective particle count increases and (i>1).

Step 3

Exam Tip

सहसंयोजन में उल्टा, (i<1) मिलता है। / Association gives the opposite result, (i<1).

Open Question Page
Ask Friends

यदि किसी पदार्थ के लिए (i=0.75) है और वह केवल द्विगुणन करता है, तो द्विगुणन की मात्रा कितनी है?

If a substance has (i=0.75) and undergoes only dimerisation, what is the degree of dimerisation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

द्विगुणन में \(i=1-\frac{\alpha}{2}\)। / For dimerisation, \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(0.75=1-\frac{\alpha}{2}\), इसलिए \(\alpha=0.50\)। / \(0.75=1-\frac{\alpha}{2}\), so \(\alpha=0.50\).

Step 3

Exam Tip

(i) जितना कम होगा, सहसंयोजन उतना अधिक होगा। / Lower (i) means greater association.

Open Question Page
Ask Friends

एक विलयन में \(CaCl_2\) का (70%) वियोजन है। (i) कितना होगा?

In a solution, \(CaCl_2\) is (70%) dissociated. What is (i)?

Explanation opens after your attempt
Correct Answer

C. (2.40)

Step 1

Concept

\(CaCl_2\) तीन आयन देता है, अतः (n=3)। / \(CaCl_2\) gives three ions, so (n=3).

Step 2

Why this answer is correct

(i=1+0.70(3-1)=2.40)। / (i=1+0.70(3-1)=2.40).

Step 3

Exam Tip

\(CaCl_2\) को दो नहीं, तीन आयनों वाला मानें। / Treat \(CaCl_2\) as a three-ion electrolyte, not two-ion.

Open Question Page
Ask Friends

किसी प्रयोग में समान मोललता पर (NaCl) विलयन का हिमांक अवनमन ग्लूकोज से लगभग (1.8) गुना है। (NaCl) के बारे में सही निष्कर्ष क्या है?

In an experiment at the same molality, the depression in freezing point of (NaCl) solution is about (1.8) times that of glucose. What is the correct conclusion about (NaCl)?

Explanation opens after your attempt
Correct Answer

A. लगभग (80%) वियोजितNearly (80%) dissociated

Step 1

Concept

ग्लूकोज के लिए (i=1) होता है। / For glucose, (i=1).

Step 2

Why this answer is correct

(NaCl) के लिए प्रभाव (1.8) गुना है, इसलिए (i=1.8)। / The effect for (NaCl) is (1.8) times, so (i=1.8).

Step 3

Exam Tip

दो आयनों के लिए \(i=1+\alpha\), अतः \(\alpha=0.8\)। / For two ions, \(i=1+\alpha\), so \(\alpha=0.8\).

Open Question Page
Ask Friends

किसी विलयन में \(K_2SO_4\) का (50%) वियोजन माना गया। (i) का मान क्या होगा?

In a solution, \(K_2SO_4\) is assumed to be (50%) dissociated. What is (i)?

Explanation opens after your attempt
Correct Answer

B. (2.0)

Step 1

Concept

\(K_2SO_4\) पूर्ण वियोजन पर तीन आयन देता है। / \(K_2SO_4\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.5(3-1)=2.0)। / (i=1+0.5(3-1)=2.0).

Step 3

Exam Tip

बहुआयनी लवणों में आयनों की कुल संख्या ध्यान से लिखें। / In polyionic salts, write the total ion count carefully.

Open Question Page
Ask Friends

परासरण दाब विधि में (i) को सीधे किस अनुपात से समझा जा सकता है?

In osmotic pressure method, (i) can be directly understood from which ratio?

Explanation opens after your attempt
Correct Answer

A. वास्तविक परासरण दाब और सामान्य परासरण दाबObserved osmotic pressure to normal osmotic pressure

Step 1

Concept

सामान्य स्थिति में परासरण दाब कण संख्या के अनुसार होता है। / Normally, osmotic pressure depends on particle count.

Step 2

Why this answer is correct

असामान्यता में वास्तविक दाब सामान्य दाब का (i) गुना हो जाता है। / In abnormal behaviour, observed pressure becomes (i) times the normal pressure.

Step 3

Exam Tip

इसलिए दाबों का अनुपात (i) बताता है। / Therefore, the pressure ratio gives (i).

Open Question Page
Ask Friends

किसी पदार्थ का (i=0.25) प्राप्त हुआ। यह किस पूर्ण सहसंयोजन से सबसे अच्छा मेल खाता है?

A substance gives (i=0.25). Which complete association does this best match?

Explanation opens after your attempt
Correct Answer

A. चार अणुओं का एक बननाFour molecules forming one

Step 1

Concept

पूर्ण (m)-गुण सहसंयोजन में \(i=\frac{1}{m}\)। / For complete (m)-fold association, \(i=\frac{1}{m}\).

Step 2

Why this answer is correct

\(i=0.25=\frac{1}{4}\), इसलिए चार अणु मिलकर एक कण बनते हैं। / \(i=0.25=\frac{1}{4}\), so four molecules form one particle.

Step 3

Exam Tip

बहुत छोटा (i) अधिक सहसंयोजन बताता है। / A very small (i) suggests stronger association.

Open Question Page
Ask Friends

यदि किसी पदार्थ का मापा मोलर द्रव्यमान वास्तविक का (0.4) गुना है, तो (i) कितना होगा?

If the observed molar mass of a substance is (0.4) times its true molar mass, what is (i)?

Explanation opens after your attempt
Correct Answer

C. (2.5)

Step 1

Concept

\((M_{\)obs\(}=0.4M_{\)true})। \(/ (M_{\)obs\(}=0.4M_{\)true}).

Step 2

Why this answer is correct

\((i=\frac{M_{\)true\(}}{M_{\)obs}}=\frac{1}{0.4}=2.5)। \(/ (i=\frac{M_{\)true\(}}{M_{\)obs\(}}=\frac{1}{0.4}=2.5).\)

Step 3

Exam Tip

मोलर द्रव्यमान कम दिखे तो (i) एक से अधिक होगा। / If observed molar mass is lower, (i) is greater than one.

Open Question Page
Ask Friends

एक विलेय \(X_2\) विलयन में \(X_2 \rightarrow 2X\) के अनुसार (30%) टूटता है। (i) कितना होगा?

A solute \(X_2\) breaks in solution as \(X_2 \rightarrow 2X\) to the extent of (30%). What is (i)?

Explanation opens after your attempt
Correct Answer

B. (1.30)

Step 1

Concept

एक कण से दो कण बनते हैं, इसलिए (n=2)। / One particle forms two particles, so (n=2).

Step 2

Why this answer is correct

(i=1+0.30(2-1)=1.30)। / (i=1+0.30(2-1)=1.30).

Step 3

Exam Tip

बंध टूटने पर कण बढ़ते हैं और (i) बढ़ता है। / When a particle splits, particle number and (i) increase.

Open Question Page
Ask Friends

एक सहगुणधर्मी प्रयोग में गणना से (i=1) निकला। कौन सा निष्कर्ष सबसे सुरक्षित है?

A colligative experiment gives (i=1). Which conclusion is the safest?

Explanation opens after your attempt
Correct Answer

A. कणों की प्रभावी संख्या सामान्य रहीEffective particle number remained normal

Step 1

Concept

(i=1) का अर्थ है कि कण संख्या अपेक्षित जैसी है। / (i=1) means the effective particle number is as expected.

Step 2

Why this answer is correct

इससे न वियोजन सिद्ध होता है न सहसंयोजन। / It does not prove dissociation or association.

Step 3

Exam Tip

केवल (i=1) देखकर पदार्थ की रचना पर अतिरिक्त निष्कर्ष न लगाएं। / Do not infer extra structural details only from (i=1).

Open Question Page
Ask Friends

किसी विलेय में (60%) त्रिगुणन होता है, अर्थात तीन अणु मिलकर एक कण बनाते हैं। (i) का मान क्या होगा?

A solute undergoes (60%) trimerisation, meaning three molecules combine into one particle. What is (i)?

Explanation opens after your attempt
Correct Answer

B. (0.60)

Step 1

Concept

(m)-गुण सहसंयोजन में \(i=1-\alpha+\frac{\alpha}{m}\)। / For (m)-fold association, \(i=1-\alpha+\frac{\alpha}{m}\).

Step 2

Why this answer is correct

(m=3), \(\alpha=0.60\) रखने पर (i=0.40+0.20=0.60)। / With (m=3), \(\alpha=0.60\), (i=0.40+0.20=0.60).

Step 3

Exam Tip

आंशिक सहसंयोजन में बची और जुड़ी दोनों मात्राएँ जोड़ें। / In partial association, add unassociated and associated contributions.

Open Question Page
Ask Friends

यदि किसी विद्युत अपघट्य के लिए (i) आदर्श अधिकतम से कम है, तो इसका सबसे अच्छा कारण क्या हो सकता है?

If the (i) value for an electrolyte is less than its ideal maximum, what is the best possible reason?

Explanation opens after your attempt
Correct Answer

A. वियोजन अपूर्ण हैDissociation is incomplete

Step 1

Concept

आदर्श अधिकतम (i) पूर्ण वियोजन पर मिलता है। / The ideal maximum (i) is obtained at complete dissociation.

Step 2

Why this answer is correct

उससे कम (i) बताता है कि सभी कण आयनों में नहीं टूटे। / A lower (i) means not all particles have split into ions.

Step 3

Exam Tip

वास्तविक विलयनों में अपूर्ण वियोजन सामान्य हो सकता है। / In real solutions, incomplete dissociation is common.

Open Question Page
Ask Friends

किसी \(AB_4\) लवण का (20%) वियोजन होता है। (i) का मान कितना होगा?

An \(AB_4\) salt is (20%) dissociated. What is the value of (i)?

Explanation opens after your attempt
Correct Answer

B. (1.8)

Step 1

Concept

\(AB_4\) पूर्ण वियोजन पर पांच आयन देता है। / \(AB_4\) gives five ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.20(5-1)=1.8)। / (i=1+0.20(5-1)=1.8).

Step 3

Exam Tip

छोटे वियोजन प्रतिशत में भी बहुआयनी लवण का (i) काफी बढ़ सकता है। / Even a small dissociation percentage can raise (i) significantly for multi-ion salts.

Open Question Page
Ask Friends

यदि समान परिस्थितियों में किसी विलेय का परासरण दाब अपेक्षित मान का (0.75) गुना है, तो उसके मापे मोलर द्रव्यमान का वास्तविक से संबंध क्या होगा?

If under identical conditions a solute has osmotic pressure (0.75) times the expected value, how is its observed molar mass related to the true value?

Explanation opens after your attempt
Correct Answer

A. \(\frac{4}{3}\) गुना\(\frac{4}{3}\) times

Step 1

Concept

परासरण दाब का अनुपात (i) देता है, इसलिए (i=0.75)। / The osmotic pressure ratio gives (i), so (i=0.75).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true}}{i})। \(/ (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 3

Exam Tip

\((M_{\)obs\(}=\frac{4}{3}M_{\)true}), इसलिए द्रव्यमान अधिक दिखेगा। \(/ Thus (M_{\)obs\(}=\frac{4}{3}M_{\)true}), so the mass appears higher.

Open Question Page
Ask Friends

किस पदार्थ में जल में असामान्य मोलर द्रव्यमान वियोजन के कारण दिखने की संभावना अधिक है?

Which substance is more likely to show abnormal molar mass in water due to dissociation?

Explanation opens after your attempt
Correct Answer

A. (KCl)

Step 1

Concept

जल ध्रुवीय विलायक है और आयनिक पदार्थों को आयनों में अलग कर सकता है। / Water is polar and can separate ionic substances into ions.

Step 2

Why this answer is correct

(KCl) एक विद्युत अपघट्य है, जबकि बाकी सामान्यतः गैर विद्युत अपघट्य हैं। / (KCl) is an electrolyte, while the others are generally non-electrolytes.

Step 3

Exam Tip

विद्युत अपघट्य में (i>1) मिल सकता है। / Electrolytes can show (i>1).

Open Question Page
Ask Friends

कौन सा कथन बेंजीन में कार्बोक्सिलिक अम्लों के असामान्य मोलर द्रव्यमान को सही समझाता है?

Which statement correctly explains abnormal molar mass of carboxylic acids in benzene?

Explanation opens after your attempt
Correct Answer

A. हाइड्रोजन बंध के कारण द्विगुणनDimerisation due to hydrogen bonding

Step 1

Concept

बेंजीन अध्रुवीय विलायक है, इसलिए आयनीकरण आसान नहीं होता। / Benzene is non-polar, so ionisation is not favoured.

Step 2

Why this answer is correct

कार्बोक्सिलिक अम्ल हाइड्रोजन बंध से द्विगुणित हो सकते हैं। / Carboxylic acids can dimerise through hydrogen bonding.

Step 3

Exam Tip

इससे (i<1) और मापा मोलर द्रव्यमान अधिक मिलता है। / This gives (i<1) and a higher observed molar mass.

Open Question Page
Ask Friends

यदि (i=2.8) और विलेय पूर्ण वियोजन पर तीन आयन दे सकता है, तो वियोजन की मात्रा लगभग कितनी है?

If (i=2.8) and the solute can give three ions on complete dissociation, what is the approximate degree of dissociation?

Explanation opens after your attempt
Correct Answer

C. (90%)

Step 1

Concept

तीन आयनों के लिए \(i=1+2\alpha\)। / For three ions, \(i=1+2\alpha\).

Step 2

Why this answer is correct

\(2.8=1+2\alpha\), इसलिए \(\alpha=0.9\)। / \(2.8=1+2\alpha\), so \(\alpha=0.9\).

Step 3

Exam Tip

\(\alpha=0.9\) को (90%) लिखें। / Write \(\alpha=0.9\) as (90%).

Open Question Page
Ask Friends

किसी पदार्थ का (i=0.6) है और वह केवल द्विगुणन करता है। द्विगुणन की मात्रा कितनी होगी?

A substance has (i=0.6) and undergoes only dimerisation. What is the degree of dimerisation?

Explanation opens after your attempt
Correct Answer

C. (80%)

Step 1

Concept

द्विगुणन के लिए \(i=1-\frac{\alpha}{2}\)। / For dimerisation, \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(0.6=1-\frac{\alpha}{2}\), इसलिए \(\frac{\alpha}{2}=0.4\) और \(\alpha=0.8\)। / \(0.6=1-\frac{\alpha}{2}\), so \(\frac{\alpha}{2}=0.4\) and \(\alpha=0.8\).

Step 3

Exam Tip

उत्तर (80%) होगा। / The answer is (80%).

Open Question Page
Ask Friends

\(एक परीक्षा प्रश्न में (M_{\)true\(}=100\),g mol^{-1}) और (i=1.25) दिया है। मापा गया मोलर द्रव्यमान कितना होगा?

\(In an exam question, (M_{\)true\(}=100\),g mol\(^{-1}) and (i=1.25) are given. What will be the observed molar mass\)?

Explanation opens after your attempt
Correct Answer

A. (80,g mol\(^{-1})\)

Step 1

Concept

\(संबंध (M_{\)obs\(}=\frac{M_{\)true}}{i}) है। \(/ Use (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{100}{1.25}=80\),g mol^{-1})। \(/ (M_{\)obs\(}=\frac{100}{1.25}=80\),g mol\(^{-1}).\)

Step 3

Exam Tip

(i>1) होने पर मापा द्रव्यमान घटता है। / When (i>1), the observed molar mass decreases.

Open Question Page
Ask Friends

एक विलयन में विलेय (A) का (30%) चतुर्गुणन होता है, यानी चार अणु मिलकर एक कण बनाते हैं। (i) का मान क्या होगा?

In a solution, solute (A) undergoes (30%) tetramerisation, meaning four molecules combine into one particle. What is the value of (i)?

Explanation opens after your attempt
Correct Answer

A. (0.775)

Step 1

Concept

(m)-गुण सहसंयोजन के लिए \(i=1-\alpha+\frac{\alpha}{m}\) लगाते हैं। / For (m)-fold association, use \(i=1-\alpha+\frac{\alpha}{m}\).

Step 2

Why this answer is correct

(m=4), \(\alpha=0.30\), इसलिए (i=0.70+0.075=0.775)। / Here (m=4), \(\alpha=0.30\), so (i=0.70+0.075=0.775).

Step 3

Exam Tip

सहसंयोजन में (i) एक से कम होता है, इसलिए उत्तर की जांच इसी से करें। / In association, (i) should be less than one, which confirms the answer.

Open Question Page
Ask Friends

किसी \(AB_3\) विद्युत अपघट्य का (40%) वियोजन होता है। समान मोललता वाले ग्लूकोज विलयन की तुलना में इसका हिमांक अवनमन कितने गुना होगा?

An \(AB_3\) electrolyte is (40%) dissociated. How many times will its freezing point depression be compared with a glucose solution of the same molality?

Explanation opens after your attempt
Correct Answer

B. (2.2) गुना(2.2) times

Step 1

Concept

\(AB_3\) पूर्ण वियोजन पर चार आयन देता है। / \(AB_3\) gives four ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.40(4-1)=2.2)। / (i=1+0.40(4-1)=2.2).

Step 3

Exam Tip

ग्लूकोज के लिए (i=1), इसलिए समान मोललता पर प्रभाव (2.2) गुना होगा। / For glucose, (i=1), so at the same molality the effect is (2.2) times.

Open Question Page
Ask Friends

किसी अम्ल का बेंजीन में मापा गया मोलर द्रव्यमान (180,g mol\(^{-1}) है, जबकि वास्तविक (120\),g mol^{-1}) है। यदि केवल द्विगुणन हो रहा हो, तो द्विगुणन की मात्रा कितनी होगी?

The observed molar mass of an acid in benzene is (180,g mol\(^{-1}), while its true molar mass is (120\),g mol\(^{-1}). If only dimerisation occurs, what is the degree of dimerisation\)?

Explanation opens after your attempt
Correct Answer

C. (66.7%)

Step 1

Concept

\((i=\frac{M_{\)true\(}}{M_{\)obs}}=\frac{120}{180}=\frac{2}{3})। \(/ (i=\frac{M_{\)true\(}}{M_{\)obs\(}}=\frac{120}{180}=\frac{2}{3}).\)

Step 2

Why this answer is correct

द्विगुणन में \(i=1-\frac{\alpha}{2}\), इसलिए \(\frac{2}{3}=1-\frac{\alpha}{2}\)। / For dimerisation, \(i=1-\frac{\alpha}{2}\), so \(\frac{2}{3}=1-\frac{\alpha}{2}\).

Step 3

Exam Tip

\(\alpha=\frac{2}{3}\), यानी लगभग (66.7%)। / \(\alpha=\frac{2}{3}\), or about (66.7%).

Open Question Page
Ask Friends

एक विद्युत अपघट्य \(X_2Y_3\) पूर्ण वियोजन पर कितने आयन दे सकता है, और (50%) वियोजन पर (i) कितना होगा?

An electrolyte \(X_2Y_3\) can give how many ions on complete dissociation, and what will be (i) at (50%) dissociation?

Explanation opens after your attempt
Correct Answer

A. पांच आयन और (3.0)Five ions and (3.0)

Step 1

Concept

\(X_2Y_3\) से कुल (2+3=5) आयन बन सकते हैं। / \(X_2Y_3\) can produce (2+3=5) ions.

Step 2

Why this answer is correct

(i=1+0.50(5-1)=3.0)। / (i=1+0.50(5-1)=3.0).

Step 3

Exam Tip

सूत्र में कुल आयन संख्या का प्रयोग करें, केवल सूत्र में दिखने वाले अलग चिह्न नहीं। / Use the total number of ions, not just different symbols in the formula.

Open Question Page
Ask Friends

यदि किसी विलेय के लिए परासरण दाब अपेक्षित मान से (25%) कम है, तो मापा गया मोलर द्रव्यमान वास्तविक से कितना होगा?

If the osmotic pressure of a solute is (25%) less than the expected value, how will its observed molar mass compare with the true molar mass?

Explanation opens after your attempt
Correct Answer

A. \(\frac{4}{3}\) गुना\(\frac{4}{3}\) times

Step 1

Concept

(25%) कम परासरण दाब का अर्थ (i=0.75) है। / A (25%) lower osmotic pressure means (i=0.75).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true\(}}{i}=\frac{M_{\)true}}{0.75})। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{i}=\frac{M_{\)true}}{0.75}).

Step 3

Exam Tip

अतः मापा द्रव्यमान \(\frac{4}{3}\) गुना होगा। / So the observed mass will be \(\frac{4}{3}\) times the true mass.

Open Question Page
Ask Friends

एक (1:2) विद्युत अपघट्य के लिए मापा गया मोलर द्रव्यमान वास्तविक का \(\frac{5}{8}\) है। वियोजन की मात्रा कितनी होगी?

For a (1:2) electrolyte, the observed molar mass is \(\frac{5}{8}\) of the true molar mass. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (30%)

Step 1

Concept

\((M_{\)obs\(}=\frac{5}{8}M_{\)true}), इसलिए \(i=\frac{8}{5}=1.6\)। \(/ (M_{\)obs\(}=\frac{5}{8}M_{\)true\(}), so (i=\frac{8}{5}=1.6).\)

Step 2

Why this answer is correct

(1:2) विद्युत अपघट्य तीन आयन देता है, अतः \(i=1+2\alpha\)। / A (1:2) electrolyte gives three ions, so \(i=1+2\alpha\).

Step 3

Exam Tip

\(1.6=1+2\alpha\), इसलिए \(\alpha=0.30\), यानी (30%)। / \(1.6=1+2\alpha\), hence \(\alpha=0.30\), or (30%).

Open Question Page
Ask Friends

किसी पदार्थ का (i=0.4) है और वह केवल (m)-गुण सहसंयोजन करता है। यदि सहसंयोजन पूर्ण है, तो (m) का मान क्या होगा?

A substance has (i=0.4) and undergoes only (m)-fold association. If association is complete, what is the value of (m)?

Explanation opens after your attempt
Correct Answer

B. (2.5)

Step 1

Concept

पूर्ण (m)-गुण सहसंयोजन में \(i=\frac{1}{m}\)। / For complete (m)-fold association, \(i=\frac{1}{m}\).

Step 2

Why this answer is correct

\(0.4=\frac{1}{m}\), इसलिए (m=2.5)। / \(0.4=\frac{1}{m}\), so (m=2.5).

Step 3

Exam Tip

यह मान पूर्ण सरल सहसंयोजन के लिए पूर्णांक नहीं है, इसलिए वास्तविक स्थिति में आंशिक या मिश्रित व्यवहार हो सकता है। / Since this is not an integer, a real case may involve partial or mixed behaviour.

Open Question Page
Ask Friends

किसी (AB) विद्युत अपघट्य के (25%) वियोजन पर मापा गया मोलर द्रव्यमान वास्तविक का कितना भाग होगा?

For (25%) dissociation of an (AB) electrolyte, what fraction of the true molar mass will be observed?

Explanation opens after your attempt
Correct Answer

A. \(\frac{4}{5}\)

Step 1

Concept

(AB) दो आयन देता है, इसलिए \(i=1+\alpha=1.25\)। / (AB) gives two ions, so \(i=1+\alpha=1.25\).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true\(}}{1.25}=\frac{4}{5}M_{\)true})। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{1.25}=\frac{4}{5}M_{\)true}).

Step 3

Exam Tip

वियोजन में मापा द्रव्यमान वास्तविक से कम दिखता है। / In dissociation, observed mass is lower than true mass.

Open Question Page
Ask Friends

यदि \(CaCl_2\) विलयन का (i=2.5) है, तो वियोजन की मात्रा कितनी होगी?

If a \(CaCl_2\) solution has (i=2.5), what is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

C. (75%)

Step 1

Concept

\(CaCl_2\) कुल तीन आयन देता है। / \(CaCl_2\) gives three ions in total.

Step 2

Why this answer is correct

\(i=1+2\alpha\), इसलिए \(2.5=1+2\alpha\)। / \(i=1+2\alpha\), so \(2.5=1+2\alpha\).

Step 3

Exam Tip

\(\alpha=0.75\), यानी (75%) वियोजन। / \(\alpha=0.75\), or (75%) dissociation.

Open Question Page
Ask Friends

एक शिक्षक ने कहा कि सहगुणधर्मी गुण दोगुना हो गया है लेकिन विलेय का द्रव्यमान और विलायक समान हैं। यह किस कारण से सबसे अधिक संभव है?

A teacher says that the colligative property has become double while solute mass and solvent are the same. What is the most likely reason?

Explanation opens after your attempt
Correct Answer

A. प्रभावी कण संख्या दोगुनी हो गईEffective particle number doubled

Step 1

Concept

सहगुणधर्मी गुण कण संख्या के समानुपाती होते हैं। / Colligative properties are proportional to particle number.

Step 2

Why this answer is correct

प्रभाव दोगुना होना (i=2) जैसा व्यवहार दिखाता है। / A doubled effect indicates behaviour similar to (i=2).

Step 3

Exam Tip

यह वियोजन या कण संख्या बढ़ने से संभव है। / This is possible due to dissociation or increased particle number.

Open Question Page
Ask Friends

बेंजीन में एसिटिक अम्ल के लिए (i=0.65) पाया गया। यदि केवल द्विगुणन हो, तो द्विगुणन की मात्रा कितनी होगी?

For acetic acid in benzene, (i=0.65) is found. If only dimerisation occurs, what is the degree of dimerisation?

Explanation opens after your attempt
Correct Answer

C. (70%)

Step 1

Concept

द्विगुणन के लिए \(i=1-\frac{\alpha}{2}\)। / For dimerisation, \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(0.65=1-\frac{\alpha}{2}\), इसलिए \(\frac{\alpha}{2}=0.35\)। / \(0.65=1-\frac{\alpha}{2}\), so \(\frac{\alpha}{2}=0.35\).

Step 3

Exam Tip

\(\alpha=0.70\), यानी (70%)। / \(\alpha=0.70\), or (70%).

Open Question Page
Ask Friends

किसी लवण \(A_3B_2\) का (20%) वियोजन है। उसका (i) मान क्या होगा?

A salt \(A_3B_2\) is (20%) dissociated. What will be its (i) value?

Explanation opens after your attempt
Correct Answer

C. (1.8)

Step 1

Concept

\(A_3B_2\) पूर्ण वियोजन पर (3+2=5) आयन देता है। / \(A_3B_2\) gives (3+2=5) ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.20(5-1)=1.8)। / (i=1+0.20(5-1)=1.8).

Step 3

Exam Tip

बहु आयन लवणों में छोटी \(\alpha\) भी (i) को काफी बढ़ा सकती है। / In multi-ion salts, even a small \(\alpha\) can increase (i) noticeably.

Open Question Page
Ask Friends

यदि (i=1.75) और विलेय दो आयनों में वियोजित हो सकता है, तो मापा गया मोलर द्रव्यमान वास्तविक का कितना होगा?

If (i=1.75) and the solute can dissociate into two ions, what will the observed molar mass be compared with the true molar mass?

Explanation opens after your attempt
Correct Answer

A. \(\frac{4}{7}\) गुना\(\frac{4}{7}\) times

Step 1

Concept

\(मापा द्रव्यमान (M_{\)obs\(}=\frac{M_{\)true}}{i}) होता है। \(/ Observed mass is (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 2

Why this answer is correct

\((i=1.75=\frac{7}{4}), इसलिए (M_{\)obs\(}=\frac{4}{7}M_{\)true})। \(/ (i=1.75=\frac{7}{4}), so (M_{\)obs\(}=\frac{4}{7}M_{\)true}).

Step 3

Exam Tip

(i>1) होने पर द्रव्यमान घटा हुआ मिलेगा। / When (i>1), observed mass is smaller.

Open Question Page
Ask Friends

एक विलेय का (i=0.875) है और वह केवल द्विगुणन करता है। इसकी द्विगुणन मात्रा क्या है?

A solute has (i=0.875) and undergoes only dimerisation. What is its degree of dimerisation?

Explanation opens after your attempt
Correct Answer

B. (25%)

Step 1

Concept

\(i=1-\frac{\alpha}{2}\) लिखें। / Write \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(0.875=1-\frac{\alpha}{2}\), इसलिए \(\frac{\alpha}{2}=0.125\)। / \(0.875=1-\frac{\alpha}{2}\), so \(\frac{\alpha}{2}=0.125\).

Step 3

Exam Tip

\(\alpha=0.25\), यानी (25%) द्विगुणन। / \(\alpha=0.25\), or (25%) dimerisation.

Open Question Page
Ask Friends

समान मोललता पर कौन सा विलयन सबसे कम परासरण दाब देगा, यदि व्यवहार आदर्श सीमा के निकट माना जाए?

At the same molality, which solution will give the lowest osmotic pressure if behaviour is near the ideal limiting case?

Explanation opens after your attempt
Correct Answer

A. पूर्ण द्विगुणित विलेयCompletely dimerised solute

Step 1

Concept

परासरण दाब (i) के समानुपाती है। / Osmotic pressure is proportional to (i).

Step 2

Why this answer is correct

पूर्ण द्विगुणन में (i=0.5), जो दिए गए विकल्पों में सबसे कम है। / Complete dimerisation gives (i=0.5), the lowest among the options.

Step 3

Exam Tip

कम (i) का अर्थ कम परासरण दाब है। / Lower (i) means lower osmotic pressure.

Open Question Page
Ask Friends

एक विलयन में \(FeCl_3\) का (60%) वियोजन माना गया। (i) कितना होगा?

In a solution, \(FeCl_3\) is assumed to be (60%) dissociated. What is (i)?

Explanation opens after your attempt
Correct Answer

B. (2.8)

Step 1

Concept

\(FeCl_3\) पूर्ण वियोजन पर चार आयन देता है। / \(FeCl_3\) gives four ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.60(4-1)=2.8)। / (i=1+0.60(4-1)=2.8).

Step 3

Exam Tip

त्रिक्लोराइड लवण में कुल चार आयन गिनें। / For a trichloride salt, count four ions in total.

Open Question Page
Ask Friends

यदि किसी विलेय का मापा मोलर द्रव्यमान वास्तविक से (25%) अधिक है, तो (i) का मान कितना होगा?

If the observed molar mass of a solute is (25%) higher than the true molar mass, what is the value of (i)?

Explanation opens after your attempt
Correct Answer

A. (0.80)

Step 1

Concept

\((M_{\)obs\(}=1.25M_{\)true})। \(/ (M_{\)obs\(}=1.25M_{\)true}).

Step 2

Why this answer is correct

\((i=\frac{M_{\)true\(}}{M_{\)obs}}=\frac{1}{1.25}=0.80)। \(/ (i=\frac{M_{\)true\(}}{M_{\)obs\(}}=\frac{1}{1.25}=0.80).\)

Step 3

Exam Tip

अधिक मापा द्रव्यमान सहसंयोजन की ओर संकेत करता है। / Higher observed molar mass suggests association.

Open Question Page
Ask Friends

किस कथन में (i) और कण संख्या का संबंध सही दिया गया है?

Which statement gives the correct relation between (i) and particle number?

Explanation opens after your attempt
Correct Answer

A. \((i=\frac{\)वास्तविक कण संख्या}{सामान्य कण संख्या})\((i=\frac{\)actual particle number}{normal particle number})

Step 1

Concept

(i) बताता है कि वास्तविक प्रभावी कण संख्या सामान्य अपेक्षा की तुलना में कितनी है। / (i) tells how the actual effective particle number compares with the normal expected number.

Step 2

Why this answer is correct

इसलिए यह वास्तविक कण संख्या और सामान्य कण संख्या का अनुपात है। / So it is the ratio of actual particle number to normal particle number.

Step 3

Exam Tip

इसी कारण (i>1) वियोजन और (i<1) सहसंयोजन दिखाता है। / That is why (i>1) indicates dissociation and (i<1) indicates association.

Open Question Page
Ask Friends

एक अज्ञात विलेय के लिए उबलांक वृद्धि अपेक्षित मान का (1.5) गुना है। यदि वह (AB) प्रकार का विद्युत अपघट्य है, तो वियोजन की मात्रा क्या है?

For an unknown solute, the boiling point elevation is (1.5) times the expected value. If it is an (AB)-type electrolyte, what is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

सहगुणधर्मी प्रभाव का गुणक (i) होता है, इसलिए (i=1.5)। / The multiplier of a colligative property is (i), so (i=1.5).

Step 2

Why this answer is correct

(AB) के लिए \(i=1+\alpha\)। / For (AB), \(i=1+\alpha\).

Step 3

Exam Tip

\(\alpha=0.5\), यानी (50%) वियोजन। / \(\alpha=0.5\), or (50%) dissociation.

Open Question Page
Ask Friends

किसी विलेय का वास्तविक मोलर द्रव्यमान \(60,g mol^{-1}\) है और (i=0.75) है। मापा गया मोलर द्रव्यमान कितना होगा?

A solute has true molar mass (60,g mol\(^{-1}) and (i=0.75). What will be the observed molar mass\)?

Explanation opens after your attempt
Correct Answer

C. (80,g mol\(^{-1})\)

Step 1

Concept

\((M_{\)obs\(}=\frac{M_{\)true}}{i})। \(/ (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{60}{0.75}=80\),g mol^{-1})। \(/ (M_{\)obs\(}=\frac{60}{0.75}=80\),g mol\(^{-1}).\)

Step 3

Exam Tip

(i<1) होने पर मापा द्रव्यमान बढ़ जाता है। / When (i<1), observed molar mass increases.

Open Question Page
Ask Friends

यदि एक विलेय \(3A \rightleftharpoons A_3\) के रूप में (45%) सहसंयोजित होता है, तो (i) कितना होगा?

If a solute associates as \(3A \rightleftharpoons A_3\) to the extent of (45%), what is (i)?

Explanation opens after your attempt
Correct Answer

B. (0.70)

Step 1

Concept

त्रिगुणन के लिए \(i=1-\alpha+\frac{\alpha}{3}\)। / For trimerisation, \(i=1-\alpha+\frac{\alpha}{3}\).

Step 2

Why this answer is correct

\(\alpha=0.45\), इसलिए (i=0.55+0.15=0.70)। / With \(\alpha=0.45\), (i=0.55+0.15=0.70).

Step 3

Exam Tip

सहसंयोजन में बचे हुए और जुड़े हुए कणों की गिनती अलग-अलग करें। / In association, count unassociated and associated particles separately.

Open Question Page
Ask Friends

किस विकल्प में वियोजन के कारण असामान्य मोलर द्रव्यमान की सही दिशा दी गई है?

Which option gives the correct direction of abnormal molar mass due to dissociation?

Explanation opens after your attempt
Correct Answer

A. \((i>1), (M_{\)obs\(}<M_{\)true})

Step 1

Concept

वियोजन में कण संख्या बढ़ती है, इसलिए (i>1)। / Dissociation increases particle number, so (i>1).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true}}{i}), अतः मापा द्रव्यमान कम आता है। \(/ Since (M_{\)obs\(}=\frac{M_{\)true}}{i}), the observed mass is lower.

Step 3

Exam Tip

वियोजन और सहसंयोजन की दिशा कभी न उलटें। / Do not reverse the directions for dissociation and association.

Open Question Page
Ask Friends

एक \(AB_2\) लवण के लिए (i=2.6) पाया गया। वियोजन प्रतिशत कितना है?

For an \(AB_2\) salt, (i=2.6) is found. What is the percentage dissociation?

Explanation opens after your attempt
Correct Answer

C. (80%)

Step 1

Concept

\(AB_2\) तीन आयन देता है। / \(AB_2\) gives three ions.

Step 2

Why this answer is correct

\(i=1+2\alpha\), इसलिए \(2.6=1+2\alpha\)। / \(i=1+2\alpha\), so \(2.6=1+2\alpha\).

Step 3

Exam Tip

\(\alpha=0.8\), यानी (80%)। / \(\alpha=0.8\), or (80%).

Open Question Page
Ask Friends

किसी विलयन में विलेय (A) का आधा भाग द्विगुणित हो जाता है और आधा सामान्य रहता है। (i) कितना होगा?

In a solution, half of solute (A) dimerises and half remains normal. What is (i)?

Explanation opens after your attempt
Correct Answer

B. (0.75)

Step 1

Concept

आधा भाग सामान्य रहने से (0.5) कण योगदान देता है। / The half that remains normal contributes (0.5) particles.

Step 2

Why this answer is correct

आधा भाग द्विगुणित होकर \(\frac{0.5}{2}=0.25\) कण योगदान देता है। / The half that dimerises contributes \(\frac{0.5}{2}=0.25\) particles.

Step 3

Exam Tip

कुल (i=0.5+0.25=0.75)। / Total (i=0.5+0.25=0.75).

Open Question Page
Ask Friends

यदि (0.02) मोल \(AB_2\) के पूर्ण वियोजन से प्रभावी कणों के कितने मोल बनेंगे?

If (0.02) mol of \(AB_2\) dissociates completely, how many moles of effective particles will be formed?

Explanation opens after your attempt
Correct Answer

C. (0.06) मोल(0.06) mol

Step 1

Concept

\(AB_2\) पूर्ण वियोजन पर तीन आयन देता है। / \(AB_2\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

प्रभावी कणों के मोल \(0.02 \times 3=0.06\) होंगे। / Effective moles of particles \(=0.02 \times 3=0.06\).

Step 3

Exam Tip

पूर्ण वियोजन में (i) सीधे आयनों की संख्या के बराबर होता है। / In complete dissociation, (i) equals the number of ions produced.

Open Question Page
Ask Friends

किसी पदार्थ के (i=1.2) से कौन सा निष्कर्ष सबसे अधिक उचित है, यदि वह दो आयनों में वियोजित हो सकता है?

Which conclusion is most suitable from (i=1.2), if the substance can dissociate into two ions?

Explanation opens after your attempt
Correct Answer

A. कम मात्रा में वियोजन हुआSmall degree of dissociation occurred

Step 1

Concept

दो आयनों वाले पदार्थ के लिए \(i=1+\alpha\)। / For a two-ion substance, \(i=1+\alpha\).

Step 2

Why this answer is correct

(i=1.2) से \(\alpha=0.2\), यानी केवल (20%) वियोजन। / From (i=1.2), \(\alpha=0.2\), meaning only (20%) dissociation.

Step 3

Exam Tip

(i) दो के पास हो तभी लगभग पूर्ण वियोजन कहा जाएगा। / Near (i=2), we may call it almost complete dissociation.

Open Question Page
Ask Friends

एक विलयन में (0.01) मोल विलेय से (0.0075) मोल प्रभावी कण मिलते हैं। (i) और व्यवहार क्या होगा?

In a solution, (0.01) mol solute gives (0.0075) mol effective particles. What are (i) and the behaviour?

Explanation opens after your attempt
Correct Answer

A. (i=0.75), सहसंयोजन(i=0.75), association

Step 1

Concept

\(i=\frac{0.0075}{0.01}=0.75\)। / \(i=\frac{0.0075}{0.01}=0.75\).

Step 2

Why this answer is correct

(i<1) का अर्थ प्रभावी कण संख्या कम हो गई।

Step 3

Exam Tip

कण संख्या घटने का कारण सहसंयोजन होता है। / A decrease in particle count indicates association.

Open Question Page
Ask Friends

यदि किसी विलयन का (i=2.25) है और विलेय \(A_2B\) जैसा है, तो वियोजन की मात्रा कितनी होगी?

If a solution has (i=2.25) and the solute behaves like \(A_2B\), what is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (62.5%)

Step 1

Concept

\(A_2B\) पूर्ण वियोजन पर तीन आयन देता है। / \(A_2B\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

\(i=1+2\alpha\), इसलिए \(2.25=1+2\alpha\)। / \(i=1+2\alpha\), so \(2.25=1+2\alpha\).

Step 3

Exam Tip

\(\alpha=0.625\), यानी (62.5%)। / \(\alpha=0.625\), or (62.5%).

Open Question Page
Ask Friends

किस कारण से गैर ध्रुवीय विलायक में कार्बोक्सिलिक अम्ल का मोलर द्रव्यमान अधिक मापा जा सकता है?

Why can the molar mass of a carboxylic acid be measured higher in a non-polar solvent?

Explanation opens after your attempt
Correct Answer

A. हाइड्रोजन बंध से द्विगुणनDimerisation through hydrogen bonding

Step 1

Concept

गैर ध्रुवीय विलायक में अम्ल आसानी से आयनित नहीं होता। / In a non-polar solvent, the acid does not ionise easily.

Step 2

Why this answer is correct

कार्बोक्सिलिक अम्ल हाइड्रोजन बंध के कारण द्विगुणित हो सकता है। / Carboxylic acid can dimerise through hydrogen bonding.

Step 3

Exam Tip

द्विगुणन से कण संख्या घटती है और मापा द्रव्यमान बढ़ता है। / Dimerisation lowers particle count and increases observed molar mass.

Open Question Page
Ask Friends

यदि किसी पदार्थ का वास्तविक मोलर द्रव्यमान (90,g mol\(^{-1}) है और मापा गया (45\),g mol\(^{-1}) है, तो (i) और संभावित कारण क्या है\)?

If the true molar mass of a substance is (90,g mol\(^{-1}) and the observed value is (45\),g mol\(^{-1}), what are (i) and the likely cause\)?

Explanation opens after your attempt
Correct Answer

A. (i=2), वियोजन(i=2), dissociation

Step 1

Concept

\(i=\frac{90}{45}=2\)। / \(i=\frac{90}{45}=2\).

Step 2

Why this answer is correct

(i>1) बताता है कि कणों की संख्या बढ़ी है। / (i>1) shows that particle count has increased.

Step 3

Exam Tip

कण संख्या बढ़ने का सामान्य कारण वियोजन है। / The usual reason for increased particle count is dissociation.

Open Question Page
Ask Friends

एक पदार्थ जल में \(A \rightarrow B+C+D\) के अनुसार (25%) वियोजित होता है। (i) कितना होगा?

A substance dissociates in water as \(A \rightarrow B+C+D\) to the extent of (25%). What is (i)?

Explanation opens after your attempt
Correct Answer

B. (1.50)

Step 1

Concept

एक (A) से तीन कण बनते हैं, इसलिए (n=3)। / One (A) gives three particles, so (n=3).

Step 2

Why this answer is correct

(i=1+0.25(3-1)=1.50)। / (i=1+0.25(3-1)=1.50).

Step 3

Exam Tip

वियोजन समीकरण में बने कुल कण ध्यान से गिनें। / Carefully count the total particles formed in the dissociation equation.

Open Question Page
Ask Friends

किसी सहगुणधर्मी प्रयोग में (i=0.5) मिला। कौन सा कथन सबसे सही है?

A colligative experiment gives (i=0.5). Which statement is most correct?

Explanation opens after your attempt
Correct Answer

A. यह पूर्ण द्विगुणन के अनुरूप हो सकता हैIt may correspond to complete dimerisation

Step 1

Concept

(i=0.5) का अर्थ कण संख्या आधी हो गई। / (i=0.5) means the particle count has become half.

Step 2

Why this answer is correct

यह दो अणुओं के मिलकर एक कण बनने से समझाया जा सकता है। / This can be explained by two molecules combining into one particle.

Step 3

Exam Tip

ऐसा परिणाम सहसंयोजन का संकेत है, वियोजन का नहीं। / Such a result indicates association, not dissociation.

Open Question Page
Ask Friends

यदि (i=3.4) और विलेय पूर्ण वियोजन पर चार आयन दे सकता है, तो वियोजन प्रतिशत कितना है?

If (i=3.4) and the solute can give four ions on complete dissociation, what is the percentage dissociation?

Explanation opens after your attempt
Correct Answer

C. (80%)

Step 1

Concept

चार आयन देने वाले विलेय के लिए \(i=1+3\alpha\)। / For a solute giving four ions, \(i=1+3\alpha\).

Step 2

Why this answer is correct

\(3.4=1+3\alpha\), इसलिए \(3\alpha=2.4\)। / \(3.4=1+3\alpha\), so \(3\alpha=2.4\).

Step 3

Exam Tip

\(\alpha=0.8\), यानी (80%)। / \(\alpha=0.8\), or (80%).

Open Question Page
Ask Friends

किसी पदार्थ में (20%) त्रिगुणन होता है। उसका (i) मान क्या होगा?

A substance undergoes (20%) trimerisation. What will be its (i) value?

Explanation opens after your attempt
Correct Answer

A. (0.867)

Step 1

Concept

त्रिगुणन में \(i=1-\alpha+\frac{\alpha}{3}\)। / For trimerisation, \(i=1-\alpha+\frac{\alpha}{3}\).

Step 2

Why this answer is correct

\(\alpha=0.20\) रखने पर \(i=0.80+\frac{0.20}{3}=0.867\) लगभग। / With \(\alpha=0.20\), \(i=0.80+\frac{0.20}{3}=0.867\) approximately.

Step 3

Exam Tip

आंशिक त्रिगुणन में (i) (1) और \(\frac{1}{3}\) के बीच रहेगा। / In partial trimerisation, (i) lies between (1) and \(\frac{1}{3}\).

Open Question Page
Ask Friends

यदि किसी विलेय का (i=1.6) है, तो समान मोललता वाले सामान्य विलेय की तुलना में उसका परासरण दाब कैसा होगा?

If a solute has (i=1.6), how will its osmotic pressure compare with a normal solute of the same molality?

Explanation opens after your attempt
Correct Answer

A. (1.6) गुना(1.6) times

Step 1

Concept

परासरण दाब (i) के समानुपाती होता है। / Osmotic pressure is proportional to (i).

Step 2

Why this answer is correct

सामान्य विलेय के लिए (i=1) होता है। / For a normal solute, (i=1).

Step 3

Exam Tip

इसलिए (i=1.6) वाला विलयन (1.6) गुना परासरण दाब देगा। / Therefore, a solution with (i=1.6) gives (1.6) times the osmotic pressure.

Open Question Page
Ask Friends

एक विलेय (A) का (80%) द्विगुणन होता है। यदि वास्तविक मोलर द्रव्यमान (100,g mol\(^{-1}) है, तो मापा गया मोलर द्रव्यमान कितना होगा\)?

A solute (A) undergoes (80%) dimerisation. If its true molar mass is (100,g mol\(^{-1}), what will be the observed molar mass\)?

Explanation opens after your attempt
Correct Answer

C. (166.7,g mol\(^{-1})\)

Step 1

Concept

द्विगुणन के लिए \(i=1-\frac{0.80}{2}=0.60\)। / For dimerisation, \(i=1-\frac{0.80}{2}=0.60\).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{100}{0.60}=166.7\),g mol^{-1}) लगभग। \(/ (M_{\)obs\(}=\frac{100}{0.60}=166.7\),g mol\(^{-1}) approximately.\)

Step 3

Exam Tip

अधिक द्विगुणन से मापा द्रव्यमान काफी बढ़ सकता है। / Strong dimerisation can greatly increase observed molar mass.

Open Question Page
Ask Friends

किस विलयन में समान सांद्रता पर सहगुणधर्मी गुण सबसे अधिक होगा, यदि वियोजन पूर्ण माना जाए?

Which solution will show the highest colligative property at the same concentration, assuming complete dissociation?

Explanation opens after your attempt
Correct Answer

D. (Al_2\(SO_4\)*3)

Step 1

Concept

समान सांद्रता पर प्रभाव (i) पर निर्भर करता है। / At the same concentration, the effect depends on (i).

Step 2

Why this answer is correct

(Al_2\(SO_4\)*3) पूर्ण वियोजन पर पांच आयन देता है। / (Al_2\(SO_4\)*3) gives five ions on complete dissociation.

Step 3

Exam Tip

पांच आयन वाला विकल्प सबसे अधिक सहगुणधर्मी प्रभाव देगा। / The option producing five ions gives the greatest colligative effect.

Open Question Page
Ask Friends

यदि किसी (AB) विद्युत अपघट्य का (i=1.05) है, तो कौन सा निष्कर्ष सही है?

If an (AB) electrolyte has (i=1.05), which conclusion is correct?

Explanation opens after your attempt
Correct Answer

A. बहुत कम वियोजनVery small dissociation

Step 1

Concept

(AB) के लिए \(i=1+\alpha\)। / For (AB), \(i=1+\alpha\).

Step 2

Why this answer is correct

\(1.05=1+\alpha\), इसलिए \(\alpha=0.05\)। / \(1.05=1+\alpha\), so \(\alpha=0.05\).

Step 3

Exam Tip

केवल (5%) वियोजन बहुत कम माना जाएगा। / Only (5%) dissociation is considered very small.

Open Question Page
Ask Friends

एक प्रयोग में वाष्पदाब अवनमन सामान्य से (30%) अधिक है। (i) कितना माना जाएगा?

In an experiment, relative lowering of vapour pressure is (30%) greater than normal. What should (i) be taken as?

Explanation opens after your attempt
Correct Answer

C. (1.30)

Step 1

Concept

सहगुणधर्मी गुणों का अनुपात (i) देता है। / The ratio of colligative properties gives (i).

Step 2

Why this answer is correct

(30%) अधिक प्रभाव का अर्थ सामान्य का (1.30) गुना है। / A (30%) greater effect means (1.30) times the normal value.

Step 3

Exam Tip

इसलिए (i=1.30) होगा। / Therefore, (i=1.30).

Open Question Page
Ask Friends

यदि किसी पदार्थ का मापा मोलर द्रव्यमान वास्तविक का दोगुना है, तो (i) क्या होगा और व्यवहार क्या कहलाएगा?

If the observed molar mass of a substance is double the true molar mass, what is (i) and what behaviour does it indicate?

Explanation opens after your attempt
Correct Answer

A. (i=0.5), सहसंयोजन(i=0.5), association

Step 1

Concept

(M*{obs\(}=2M*{\)true})। \(/ (M_{\)obs\(}=2M_{\)true}).

Step 2

Why this answer is correct

\((i=\frac{M*{\)true\(}}{M_{\)obs}}=\frac{1}{2}=0.5)। \(/ (i=\frac{M_{\)true\(}}{M_{\)obs\(}}=\frac{1}{2}=0.5).\)

Step 3

Exam Tip

(i<1) होने से सहसंयोजन का संकेत मिलता है। / Since (i<1), it indicates association.

Open Question Page
Ask Friends

किसी विलयन में \(AlCl_3\) का (30%) वियोजन है। (i) का मान क्या होगा?

In a solution, \(AlCl_3\) is (30%) dissociated. What is the value of (i)?

Explanation opens after your attempt
Correct Answer

C. (1.9)

Step 1

Concept

\(AlCl_3\) पूर्ण वियोजन पर चार आयन देता है। / \(AlCl_3\) gives four ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.30(4-1)=1.9)। / (i=1+0.30(4-1)=1.9).

Step 3

Exam Tip

\(AlCl_3\) में \(Al^{3+}\) और तीन (Cl^-) मिलाकर चार आयन होते हैं। / \(AlCl_3\) gives one \(Al^{3+}\) and three (Cl^-), making four ions.

Open Question Page
Ask Friends

एक विलेय का (60%) भाग द्विगुणित और (40%) भाग सामान्य है। उसका (i) मान क्या होगा?

A solute is (60%) dimerised and (40%) remains normal. What is its (i) value?

Explanation opens after your attempt
Correct Answer

B. (0.70)

Step 1

Concept

सामान्य भाग (0.40) कण योगदान देता है। / The normal part contributes (0.40) particles.

Step 2

Why this answer is correct

द्विगुणित भाग \(\frac{0.60}{2}=0.30\) कण योगदान देता है। / The dimerised part contributes \(\frac{0.60}{2}=0.30\) particles.

Step 3

Exam Tip

कुल (i=0.40+0.30=0.70)। / Total (i=0.40+0.30=0.70).

Open Question Page
Ask Friends

यदि किसी \(AB_2\) लवण का हिमांक अवनमन सामान्य गैर विद्युत अपघट्य से (2.4) गुना है, तो वियोजन प्रतिशत क्या है?

If the freezing point depression of an \(AB_2\) salt is (2.4) times that of a normal non-electrolyte, what is the percentage dissociation?

Explanation opens after your attempt
Correct Answer

B. (70%)

Step 1

Concept

प्रभाव का अनुपात (i=2.4) देता है। / The ratio of effects gives (i=2.4).

Step 2

Why this answer is correct

\(AB_2\) के लिए \(i=1+2\alpha\)। / For \(AB_2\), \(i=1+2\alpha\).

Step 3

Exam Tip

\(2.4=1+2\alpha\), इसलिए \(\alpha=0.70\), यानी (70%)। / \(2.4=1+2\alpha\), so \(\alpha=0.70\), or (70%).

Open Question Page
Ask Friends

कौन सा कथन सही है जब (i) का मान एक से कम मिलता है?

Which statement is correct when the value of (i) is less than one?

Explanation opens after your attempt
Correct Answer

A. कणों का सहसंयोजन संभव हैAssociation of particles is possible

Step 1

Concept

(i<1) बताता है कि प्रभावी कण संख्या घट गई है।

Step 2

Why this answer is correct

कण संख्या घटने का सामान्य कारण सहसंयोजन है। / A common reason for this decrease is association.

Step 3

Exam Tip

इस स्थिति में मापा मोलर द्रव्यमान अधिक मिल सकता है। / In this case, observed molar mass may be higher.

Open Question Page
Ask Friends

किसी विलयन में (0.05) मोल (AB) से वियोजन के बाद (0.075) मोल प्रभावी कण मिलते हैं। (AB) का वियोजन प्रतिशत कितना है?

In a solution, (0.05) mol of (AB) gives (0.075) mol effective particles after dissociation. What is the percentage dissociation of (AB)?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

\(i=\frac{0.075}{0.05}=1.5\)। / \(i=\frac{0.075}{0.05}=1.5\).

Step 2

Why this answer is correct

(AB) के लिए \(i=1+\alpha\)। / For (AB), \(i=1+\alpha\).

Step 3

Exam Tip

\(\alpha=0.5\), यानी (50%)। / \(\alpha=0.5\), or (50%).

Open Question Page
Ask Friends

यदि (i=0.8) और पदार्थ केवल द्विगुणन करता है, तो समान मोललता पर उसका क्वथनांक वृद्धि सामान्य विलेय की तुलना में कैसी होगी?

If (i=0.8) and the substance undergoes only dimerisation, how will its boiling point elevation compare with a normal solute at the same molality?

Explanation opens after your attempt
Correct Answer

A. (0.8) गुना(0.8) times

Step 1

Concept

क्वथनांक वृद्धि (i) के समानुपाती है। / Boiling point elevation is proportional to (i).

Step 2

Why this answer is correct

सामान्य विलेय के लिए (i=1), जबकि यहाँ (i=0.8) है। / A normal solute has (i=1), while here (i=0.8).

Step 3

Exam Tip

इसलिए वृद्धि सामान्य की (0.8) गुना होगी। / Therefore, the elevation is (0.8) times the normal value.

Open Question Page
Ask Friends

किसी पदार्थ के लिए (i=2.0) है। कौन सा उदाहरण इस मान को सबसे सरल रूप से समझा सकता है?

For a substance, (i=2.0). Which example can explain this value most simply?

Explanation opens after your attempt
Correct Answer

A. (AB) का पूर्ण वियोजनComplete dissociation of (AB)

Step 1

Concept

(i=2) का अर्थ सामान्य से दोगुनी कण संख्या है। / (i=2) means twice the normal particle count.

Step 2

Why this answer is correct

(AB) पूर्ण वियोजन पर (A^+) और (B^-), यानी दो कण देता है। / Complete dissociation of (AB) gives (A^+) and (B^-), two particles.

Step 3

Exam Tip

\(AB_2\) पूर्ण वियोजन पर तीन कण देगा, इसलिए वह (i=3) के निकट होगा। / Complete dissociation of \(AB_2\) would give three particles, so it would be closer to (i=3).

Open Question Page
Ask Friends

एक \(A_2B_3\) लवण का (75%) वियोजन है। (i) कितना होगा?

An \(A_2B_3\) salt is (75%) dissociated. What will be (i)?

Explanation opens after your attempt
Correct Answer

C. (4.0)

Step 1

Concept

\(A_2B_3\) पूर्ण वियोजन पर पांच आयन देता है। / \(A_2B_3\) gives five ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.75(5-1)=1+3=4)। / (i=1+0.75(5-1)=1+3=4).

Step 3

Exam Tip

बड़े आयन संख्या वाले लवणों में (i) तेजी से बढ़ता है। / Salts producing many ions show a rapid increase in (i).

Open Question Page
Ask Friends

यदि किसी विलेय का (i=0.625) है और वह केवल द्विगुणन करता है, तो मापा गया मोलर द्रव्यमान वास्तविक का कितना गुना होगा?

If a solute has (i=0.625) and undergoes only dimerisation, how many times the true molar mass will be observed?

Explanation opens after your attempt
Correct Answer

A. (1.6) गुना(1.6) times

Step 1

Concept

\((M_{\)obs\(}=\frac{M_{\)true}}{i})। \(/ (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 2

Why this answer is correct

\(\frac{1}{0.625}=1.6\), इसलिए मापा द्रव्यमान (1.6) गुना होगा। / \(\frac{1}{0.625}=1.6\), so the observed mass is (1.6) times.

Step 3

Exam Tip

(i<1) में द्रव्यमान बढ़कर मिलता है। / When (i<1), molar mass appears higher.

Open Question Page
Ask Friends

किसी परीक्षा समस्या में (i=1+\alpha(n-1)) दिया है। इस सूत्र का उपयोग कब उचित है?

In an exam problem, (i=1+\alpha(n-1)) is given. When is this formula suitable?

Explanation opens after your attempt
Correct Answer

A. आंशिक वियोजन के लिएFor partial dissociation

Step 1

Concept

इस सूत्र में (n) पूर्ण वियोजन पर बनने वाले कणों की संख्या है। / In this formula, (n) is the number of particles formed on complete dissociation.

Step 2

Why this answer is correct

\(\alpha\) वियोजन की मात्रा बताता है। / \(\alpha\) represents the degree of dissociation.

Step 3

Exam Tip

सहसंयोजन के लिए अलग सूत्र प्रयोग करना चाहिए। / For association, a different expression should be used.

Open Question Page
Ask Friends

किसी विलेय का वास्तविक मोलर द्रव्यमान (150,g mol\(^{-1}) है और परासरण दाब विधि से मापा गया द्रव्यमान (100\),g mol^{-1}) है। (i) का मान क्या होगा?

A solute has true molar mass (150,g mol\(^{-1}), and the molar mass measured by osmotic pressure method is (100\),g mol\(^{-1}). What is the value of (i)\)?

Explanation opens after your attempt
Correct Answer

A. (1.5)

Step 1

Concept

\(संबंध (i=\frac{M_{\)true\(}}{M_{\)obs}}) प्रयोग करते हैं। \(/ Use (i=\frac{M_{\)true\(}}{M_{\)obs}}).

Step 2

Why this answer is correct

\(i=\frac{150}{100}=1.5\)। / \(i=\frac{150}{100}=1.5\).

Step 3

Exam Tip

(i>1) बताता है कि विलेय में वियोजन जैसा व्यवहार हो सकता है। / Since (i>1), the solute may show dissociation-like behaviour.

Open Question Page
Ask Friends

किसी (AB) प्रकार के विद्युत अपघट्य का (35%) वियोजन होता है। उसका (i) मान क्या होगा?

An (AB)-type electrolyte undergoes (35%) dissociation. What will be its (i) value?

Explanation opens after your attempt
Correct Answer

A. (1.35)

Step 1

Concept

(AB) पूर्ण वियोजन पर दो आयन देता है। / (AB) gives two ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+\alpha(n-1)=1+0.35(2-1)=1.35)। / (i=1+\alpha(n-1)=1+0.35(2-1)=1.35).

Step 3

Exam Tip

दो आयन वाले विद्युत अपघट्य के लिए \(i=1+\alpha\) जल्दी उपयोग किया जा सकता है। / For a two-ion electrolyte, \(i=1+\alpha\) can be used quickly.

Open Question Page
Ask Friends

किसी पदार्थ में (25%) त्रिगुणन होता है। उसका (i) मान लगभग कितना होगा?

A substance undergoes (25%) trimerisation. What will be its approximate (i) value?

Explanation opens after your attempt
Correct Answer

A. (0.833)

Step 1

Concept

त्रिगुणन में \(i=1-\alpha+\frac{\alpha}{3}\) होता है। / For trimerisation, \(i=1-\alpha+\frac{\alpha}{3}\).

Step 2

Why this answer is correct

\(\alpha=0.25\), इसलिए \(i=0.75+\frac{0.25}{3}=0.833\) लगभग। / With \(\alpha=0.25\), \(i=0.75+\frac{0.25}{3}=0.833\) approximately.

Step 3

Exam Tip

आंशिक सहसंयोजन में (i) एक से कम रहता है। / In partial association, (i) remains less than one.

Open Question Page
Ask Friends

एक विलयन में \(A_2B\) का (40%) वियोजन है। समान मोललता पर उसका परासरण दाब सामान्य गैर विद्युत अपघट्य से कितने गुना होगा?

In a solution, \(A_2B\) is (40%) dissociated. At the same molality, how many times will its osmotic pressure be compared with a normal non-electrolyte?

Explanation opens after your attempt
Correct Answer

B. (1.8) गुना(1.8) times

Step 1

Concept

\(A_2B\) पूर्ण वियोजन पर तीन आयन देता है। / \(A_2B\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.40(3-1)=1.8)। / (i=1+0.40(3-1)=1.8).

Step 3

Exam Tip

समान मोललता पर परासरण दाब का अनुपात (i) के बराबर होगा। / At the same molality, the osmotic pressure ratio equals (i).

Open Question Page
Ask Friends

यदि किसी विलेय का मापा गया मोलर द्रव्यमान वास्तविक का (1.6) गुना है, तो (i) का मान क्या होगा?

If the observed molar mass of a solute is (1.6) times its true molar mass, what is the value of (i)?

Explanation opens after your attempt
Correct Answer

A. (0.625)

Step 1

Concept

\((M_{\)obs\(}=1.6M_{\)true})। \(/ (M_{\)obs\(}=1.6M_{\)true}).

Step 2

Why this answer is correct

\((i=\frac{M_{\)true\(}}{M_{\)obs}}=\frac{1}{1.6}=0.625)। \(/ (i=\frac{M_{\)true\(}}{M_{\)obs\(}}=\frac{1}{1.6}=0.625).\)

Step 3

Exam Tip

(i<1) होने पर सहसंयोजन की संभावना देखी जाती है। / When (i<1), association is usually considered.

Open Question Page
Ask Friends

किसी \(AB_4\) प्रकार के लवण के लिए (i=3.0) पाया गया। वियोजन की मात्रा कितनी होगी?

For an \(AB_4\)-type salt, (i=3.0) is observed. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

C. (50%)

Step 1

Concept

\(AB_4\) पूर्ण वियोजन पर पांच आयन देता है। / \(AB_4\) gives five ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+\alpha(5-1)), इसलिए \(3=1+4\alpha\)। / (i=1+\alpha(5-1)), so \(3=1+4\alpha\).

Step 3

Exam Tip

\(\alpha=0.5\), यानी (50%) वियोजन। / \(\alpha=0.5\), or (50%) dissociation.

Open Question Page
Ask Friends

यदि (70%) द्विगुणन हो रहा हो, तो मापा गया मोलर द्रव्यमान वास्तविक का लगभग कितना गुना होगा?

If (70%) dimerisation occurs, approximately how many times the true molar mass will be observed?

Explanation opens after your attempt
Correct Answer

A. (1.54) गुना(1.54) times

Step 1

Concept

द्विगुणन के लिए \(i=1-\frac{\alpha}{2}=1-\frac{0.70}{2}=0.65\)। / For dimerisation, \(i=1-\frac{\alpha}{2}=1-\frac{0.70}{2}=0.65\).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true\(}}{0.65}\approx1.54M_{\)true})। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{0.65}\approx1.54M_{\)true}).

Step 3

Exam Tip

सहसंयोजन जितना अधिक होगा, मापा द्रव्यमान उतना अधिक दिखेगा। / Higher association makes observed molar mass larger.

Open Question Page
Ask Friends

एक पदार्थ (X) जल में \(X \rightarrow P+Q+R+S\) के अनुसार (20%) वियोजित होता है। (i) क्या होगा?

A substance (X) dissociates in water as \(X \rightarrow P+Q+R+S\) to the extent of (20%). What will be (i)?

Explanation opens after your attempt
Correct Answer

C. (1.6)

Step 1

Concept

एक (X) से चार कण बनते हैं, इसलिए (n=4)। / One (X) gives four particles, so (n=4).

Step 2

Why this answer is correct

(i=1+0.20(4-1)=1.6)। / (i=1+0.20(4-1)=1.6).

Step 3

Exam Tip

समीकरण में उत्पादों की कुल संख्या को (n) मानें। / Treat the total number of product particles as (n).

Open Question Page
Ask Friends

कौन सा प्रेक्षण सहसंयोजन के कारण अधिक मोलर द्रव्यमान की पुष्टि के सबसे निकट है?

Which observation is closest to confirming higher molar mass due to association?

Explanation opens after your attempt
Correct Answer

A. सहगुणधर्मी प्रभाव अपेक्षा से कमColligative effect lower than expected

Step 1

Concept

सहसंयोजन में प्रभावी कण संख्या घटती है। / In association, the effective particle count decreases.

Step 2

Why this answer is correct

कम कणों के कारण सहगुणधर्मी प्रभाव अपेक्षा से कम मिलता है। / Fewer particles give a lower colligative effect than expected.

Step 3

Exam Tip

कम प्रभाव से गणना में मोलर द्रव्यमान अधिक आता है। / A lower effect gives a higher calculated molar mass.

Open Question Page
Ask Friends

एक विलयन में \(MgCl_2\) का (85%) वियोजन है। (i) का मान क्या होगा?

In a solution, \(MgCl_2\) is (85%) dissociated. What is the value of (i)?

Explanation opens after your attempt
Correct Answer

A. (2.70)

Step 1

Concept

\(MgCl_2\) पूर्ण वियोजन पर तीन आयन देता है। / \(MgCl_2\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.85(3-1)=2.70)। / (i=1+0.85(3-1)=2.70).

Step 3

Exam Tip

द्विसंयोजी धातु क्लोराइड में दो क्लोराइड आयन जोड़ना न भूलें। / Do not forget the two chloride ions in such salts.

Open Question Page
Ask Friends

यदि समान मोललता पर एक विलयन का हिमांक अवनमन सामान्य विलेय से (0.6) गुना है, तो मापा मोलर द्रव्यमान वास्तविक का कितना होगा?

If at the same molality a solution has freezing point depression (0.6) times that of a normal solute, what will its observed molar mass be compared with the true molar mass?

Explanation opens after your attempt
Correct Answer

A. (1.67) गुना(1.67) times

Step 1

Concept

प्रभाव का अनुपात (i=0.6) देता है। / The effect ratio gives (i=0.6).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true\(}}{0.6}=1.67M_{\)true}) लगभग। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{0.6}=1.67M_{\)true}) approximately.

Step 3

Exam Tip

कम हिमांक अवनमन अधिक मापा द्रव्यमान बताता है। / A lower freezing point depression indicates a higher observed mass.

Open Question Page
Ask Friends

किसी (Al_2\(SO_4\)*3) लवण का (40%) वियोजन माना जाए, तो (i) कितना होगा?

If (Al_2\(SO_4\)*3) is assumed to be (40%) dissociated, what will be (i)?

Explanation opens after your attempt
Correct Answer

B. (2.6)

Step 1

Concept

(Al_2\(SO_4\)*3) पूर्ण वियोजन पर पांच आयन देता है। / (Al_2\(SO_4\)*3) gives five ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.40(5-1)=2.6)। / (i=1+0.40(5-1)=2.6).

Step 3

Exam Tip

बहुआयनी लवण में कुल आयनों की संख्या सही गिनना जरूरी है। / For multi-ion salts, correct ion counting is essential.

Open Question Page
Ask Friends

किसी अम्ल का (i=0.7) है और वह केवल द्विगुणन करता है। द्विगुणन प्रतिशत कितना है?

An acid has (i=0.7) and undergoes only dimerisation. What is the percentage dimerisation?

Explanation opens after your attempt
Correct Answer

C. (60%)

Step 1

Concept

द्विगुणन में \(i=1-\frac{\alpha}{2}\)। / For dimerisation, \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(0.7=1-\frac{\alpha}{2}\), इसलिए \(\frac{\alpha}{2}=0.3\)। / \(0.7=1-\frac{\alpha}{2}\), so \(\frac{\alpha}{2}=0.3\).

Step 3

Exam Tip

\(\alpha=0.6\), यानी (60%)। / \(\alpha=0.6\), or (60%).

Open Question Page
Ask Friends

यदि (0.04) मोल \(AB_3\) का पूर्ण वियोजन हो, तो प्रभावी कणों के मोल कितने होंगे?

If (0.04) mol of \(AB_3\) dissociates completely, how many moles of effective particles will be produced?

Explanation opens after your attempt
Correct Answer

D. (0.16) मोल(0.16) mol

Step 1

Concept

\(AB_3\) पूर्ण वियोजन पर चार आयन देता है। / \(AB_3\) gives four ions on complete dissociation.

Step 2

Why this answer is correct

प्रभावी कणों के मोल \(0.04\times4=0.16\) होंगे। / Effective moles of particles \(=0.04\times4=0.16\).

Step 3

Exam Tip

पूर्ण वियोजन में (i) सीधे आयन संख्या के बराबर होता है। / In complete dissociation, (i) equals the ion count.

Open Question Page
Ask Friends

किस स्थिति में (i) का मान (1) से बहुत अधिक मिलने की संभावना सबसे अधिक है?

In which situation is (i) most likely to be much greater than (1)?

Explanation opens after your attempt
Correct Answer

A. बहुआयनी लवण का अधिक वियोजनStrong dissociation of a multi-ion salt

Step 1

Concept

(i>1) कण संख्या बढ़ने को दिखाता है। / (i>1) shows an increase in particle number.

Step 2

Why this answer is correct

बहुआयनी लवण अधिक वियोजन पर कई आयन देता है। / A multi-ion salt can give several ions on dissociation.

Step 3

Exam Tip

इसलिए उसका (i) (1) से काफी अधिक हो सकता है। / Therefore its (i) can be much greater than (1).

Open Question Page
Ask Friends

एक \(AB_2\) लवण के लिए मापा गया मोलर द्रव्यमान वास्तविक का \(\frac{5}{9}\) है। वियोजन की मात्रा कितनी है?

For an \(AB_2\) salt, the observed molar mass is \(\frac{5}{9}\) of the true molar mass. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (40%)

Step 1

Concept

(M*{obs\(}=\frac{5}{9}M*{\)true}), इसलिए \(i=\frac{9}{5}=1.8\)। / (M*{obs\(}=\frac{5}{9}M*{\)true\(}), so (i=\frac{9}{5}=1.8).\)

Step 2

Why this answer is correct

\(AB_2\) के लिए \(i=1+2\alpha\)। / For \(AB_2\), \(i=1+2\alpha\).

Step 3

Exam Tip

\(1.8=1+2\alpha\), इसलिए \(\alpha=0.4\), यानी (40%)। / \(1.8=1+2\alpha\), so \(\alpha=0.4\), or (40%).

Open Question Page
Ask Friends

यदि किसी विलयन में विलेय का (i=0.9) है, तो समान मोललता वाले सामान्य विलेय की तुलना में क्वथनांक वृद्धि कैसी होगी?

If a solute has (i=0.9), how will its boiling point elevation compare with a normal solute of the same molality?

Explanation opens after your attempt
Correct Answer

A. (0.9) गुना(0.9) times

Step 1

Concept

क्वथनांक वृद्धि (i) के समानुपाती होती है। / Boiling point elevation is proportional to (i).

Step 2

Why this answer is correct

सामान्य विलेय के लिए (i=1) होता है। / A normal solute has (i=1).

Step 3

Exam Tip

अतः (i=0.9) पर वृद्धि सामान्य की (0.9) गुना होगी। / Therefore, when (i=0.9), the elevation is (0.9) times the normal value.

Open Question Page
Ask Friends

किसी पदार्थ का (40%) चतुर्गुणन होता है। उसका (i) मान क्या होगा?

A substance undergoes (40%) tetramerisation. What will be its (i) value?

Explanation opens after your attempt
Correct Answer

A. (0.70)

Step 1

Concept

चतुर्गुणन में \(i=1-\alpha+\frac{\alpha}{4}\)। / For tetramerisation, \(i=1-\alpha+\frac{\alpha}{4}\).

Step 2

Why this answer is correct

\(\alpha=0.40\), इसलिए (i=0.60+0.10=0.70)। / With \(\alpha=0.40\), (i=0.60+0.10=0.70).

Step 3

Exam Tip

चार अणुओं के एक बनने पर कण संख्या तेज़ी से घटती है। / When four molecules form one, particle count decreases strongly.

Open Question Page
Ask Friends

यदि किसी (1:1) विद्युत अपघट्य का (i=1.72) है, तो वियोजन प्रतिशत कितना है?

If a (1:1) electrolyte has (i=1.72), what is the percentage dissociation?

Explanation opens after your attempt
Correct Answer

C. (72%)

Step 1

Concept

(1:1) विद्युत अपघट्य दो आयन देता है। / A (1:1) electrolyte gives two ions.

Step 2

Why this answer is correct

इसलिए \(i=1+\alpha\), अतः \(\alpha=1.72-1=0.72\)। / Hence \(i=1+\alpha\), so \(\alpha=1.72-1=0.72\).

Step 3

Exam Tip

प्रतिशत वियोजन (72%) होगा। / The percentage dissociation is (72%).

Open Question Page
Ask Friends

किसी विलेय का वाष्पदाब अवनमन अपेक्षित से (40%) अधिक है। (i) का मान क्या माना जाएगा?

The relative lowering of vapour pressure of a solute is (40%) higher than expected. What value of (i) should be taken?

Explanation opens after your attempt
Correct Answer

B. (1.40)

Step 1

Concept

सहगुणधर्मी प्रभाव का अनुपात (i) बताता है। / The ratio of colligative effects gives (i).

Step 2

Why this answer is correct

(40%) अधिक प्रभाव का अर्थ सामान्य का (1.40) गुना है। / A (40%) higher effect means (1.40) times the normal effect.

Step 3

Exam Tip

इसलिए (i=1.40) होगा। / Therefore, (i=1.40).

Open Question Page
Ask Friends

यदि \(Na_2SO_4\) का (90%) वियोजन हो, तो (i) कितना होगा?

If \(Na_2SO_4\) is (90%) dissociated, what will be (i)?

Explanation opens after your attempt
Correct Answer

C. (2.8)

Step 1

Concept

\(Na_2SO_4\) पूर्ण वियोजन पर तीन आयन देता है। / \(Na_2SO_4\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.90(3-1)=2.8)। / (i=1+0.90(3-1)=2.8).

Step 3

Exam Tip

दो सोडियम आयन और एक सल्फेट आयन मिलाकर तीन आयन होते हैं। / Two sodium ions and one sulphate ion make three ions in total.

Open Question Page
Ask Friends

किसी विलयन में (0.03) मोल विलेय से (0.045) मोल प्रभावी कण बनते हैं। (i) और संभावित व्यवहार क्या है?

In a solution, (0.03) mol solute forms (0.045) mol effective particles. What are (i) and the likely behaviour?

Explanation opens after your attempt
Correct Answer

A. (i=1.5), वियोजन(i=1.5), dissociation

Step 1

Concept

\(i=\frac{0.045}{0.03}=1.5\)। / \(i=\frac{0.045}{0.03}=1.5\).

Step 2

Why this answer is correct

(i>1) बताता है कि प्रभावी कण संख्या बढ़ी है। / (i>1) shows an increase in effective particle number.

Step 3

Exam Tip

कण संख्या बढ़ने का सामान्य कारण वियोजन है। / The usual reason for increased particle number is dissociation.

Open Question Page
Ask Friends

एक विलेय \(2A \rightleftharpoons A_2\) के रूप में (90%) तक सहसंयोजित होता है। (i) कितना होगा?

A solute associates as \(2A \rightleftharpoons A_2\) to the extent of (90%). What will be (i)?

Explanation opens after your attempt
Correct Answer

B. (0.55)

Step 1

Concept

द्विगुणन में \(i=1-\frac{\alpha}{2}\)। / For dimerisation, \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(\alpha=0.90\), इसलिए (i=1-0.45=0.55)। / With \(\alpha=0.90\), (i=1-0.45=0.55).

Step 3

Exam Tip

बहुत अधिक द्विगुणन पर (i) (0.5) के निकट आता है। / At very high dimerisation, (i) approaches (0.5).

Open Question Page
Ask Friends

किस कथन में असामान्य मोलर द्रव्यमान का कारण सही दिया गया है?

Which statement correctly gives the cause of abnormal molar mass?

Explanation opens after your attempt
Correct Answer

A. विलेय के कणों की संख्या का बदलनाChange in number of solute particles

Step 1

Concept

सहगुणधर्मी गुण विलेय कणों की संख्या पर निर्भर करते हैं। / Colligative properties depend on the number of solute particles.

Step 2

Why this answer is correct

वियोजन कण बढ़ाता है और सहसंयोजन कण घटाता है। / Dissociation increases particles and association decreases particles.

Step 3

Exam Tip

इसी कण संख्या परिवर्तन से मोलर द्रव्यमान असामान्य निकलता है। / This change in particle number causes abnormal molar mass.

Open Question Page
Ask Friends

यदि किसी \(AB_3\) लवण का मापा मोलर द्रव्यमान वास्तविक का आधा है, तो वियोजन की मात्रा कितनी है?

If the observed molar mass of an \(AB_3\) salt is half of the true molar mass, what is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (33.3%)

Step 1

Concept

मापा द्रव्यमान आधा है, इसलिए (i=2)। / The observed mass is half, so (i=2).

Step 2

Why this answer is correct

\(AB_3\) के लिए \(i=1+3\alpha\)। / For \(AB_3\), \(i=1+3\alpha\).

Step 3

Exam Tip

\(2=1+3\alpha\), अतः \(\alpha=\frac{1}{3}\), यानी (33.3%)। / \(2=1+3\alpha\), so \(\alpha=\frac{1}{3}\), or (33.3%).

Open Question Page
Ask Friends

किसी पदार्थ में (50%) चतुर्गुणन होता है। मापा मोलर द्रव्यमान वास्तविक का कितना गुना होगा?

A substance undergoes (50%) tetramerisation. How many times the true molar mass will be observed?

Explanation opens after your attempt
Correct Answer

A. (1.60) गुना(1.60) times

Step 1

Concept

चतुर्गुणन में \(i=1-\alpha+\frac{\alpha}{4}\)। / For tetramerisation, \(i=1-\alpha+\frac{\alpha}{4}\).

Step 2

Why this answer is correct

\(\alpha=0.50\), इसलिए (i=0.50+0.125=0.625)। / With \(\alpha=0.50\), (i=0.50+0.125=0.625).

Step 3

Exam Tip

\((M_{\)obs\(}=\frac{M_{\)true\(}}{0.625}=1.60M_{\)true})। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{0.625}=1.60M_{\)true}).

Open Question Page
Ask Friends

यदि (KCl) का (75%) वियोजन हो, तो समान सांद्रता पर इसका परासरण दाब ग्लूकोज से कितने गुना होगा?

If (KCl) is (75%) dissociated, how many times will its osmotic pressure be compared with glucose at the same concentration?

Explanation opens after your attempt
Correct Answer

C. (1.75) गुना(1.75) times

Step 1

Concept

(KCl) दो आयन देता है, इसलिए \(i=1+\alpha\)। / (KCl) gives two ions, so \(i=1+\alpha\).

Step 2

Why this answer is correct

\(\alpha=0.75\), अतः (i=1.75)। / With \(\alpha=0.75\), (i=1.75).

Step 3

Exam Tip

ग्लूकोज के लिए (i=1), इसलिए अनुपात (1.75) होगा। / For glucose, (i=1), so the ratio is (1.75).

Open Question Page
Ask Friends

एक विलेय का (i=0.75) है। यदि वह केवल त्रिगुणन करता है, तो त्रिगुणन की मात्रा कितनी होगी?

A solute has (i=0.75). If it undergoes only trimerisation, what is the degree of trimerisation?

Explanation opens after your attempt
Correct Answer

B. (37.5%)

Step 1

Concept

त्रिगुणन में \(i=1-\alpha+\frac{\alpha}{3}=1-\frac{2\alpha}{3}\)। / For trimerisation, \(i=1-\alpha+\frac{\alpha}{3}=1-\frac{2\alpha}{3}\).

Step 2

Why this answer is correct

\(0.75=1-\frac{2\alpha}{3}\), इसलिए \(\frac{2\alpha}{3}=0.25\)। / \(0.75=1-\frac{2\alpha}{3}\), so \(\frac{2\alpha}{3}=0.25\).

Step 3

Exam Tip

\(\alpha=0.375\), यानी (37.5%)। / \(\alpha=0.375\), or (37.5%).

Open Question Page
Ask Friends

किसी \(AB_2\) लवण के लिए (i=1.1) मिला। सबसे सुरक्षित निष्कर्ष क्या है?

For an \(AB_2\) salt, (i=1.1) is obtained. What is the safest conclusion?

Explanation opens after your attempt
Correct Answer

A. वियोजन बहुत कम हैDissociation is very small

Step 1

Concept

\(AB_2\) के लिए पूर्ण वियोजन पर (i=3) हो सकता है। / For \(AB_2\), complete dissociation can give (i=3).

Step 2

Why this answer is correct

(i=1.1) एक के बहुत निकट है, इसलिए कण संख्या थोड़ी ही बढ़ी। / (i=1.1) is very close to one, so particle count increased only slightly.

Step 3

Exam Tip

इसका अर्थ बहुत कम वियोजन है। / This means very small dissociation.

Open Question Page
Ask Friends

एक विलयन में (0.02) मोल विलेय से सहसंयोजन के बाद (0.015) मोल प्रभावी कण मिलते हैं। (i) कितना है?

In a solution, (0.02) mol solute gives (0.015) mol effective particles after association. What is (i)?

Explanation opens after your attempt
Correct Answer

A. (0.75)

Step 1

Concept

\((i=\frac{\)प्रभावी कणों के मोल}{आरंभिक विलेय के मोल})। \(/ (i=\frac{\)moles of effective particles}{initial moles of solute}).

Step 2

Why this answer is correct

\(i=\frac{0.015}{0.02}=0.75\)। / \(i=\frac{0.015}{0.02}=0.75\).

Step 3

Exam Tip

(i<1) होने से कणों के सहसंयोजन का संकेत मिलता है। / Since (i<1), association of particles is indicated.

Open Question Page
Ask Friends

यदि किसी विलेय के लिए (i=2.2) है और वह तीन आयन दे सकता है, तो वियोजन प्रतिशत क्या होगा?

If a solute has (i=2.2) and can produce three ions, what is the percentage dissociation?

Explanation opens after your attempt
Correct Answer

B. (60%)

Step 1

Concept

तीन आयन देने वाले विलेय के लिए \(i=1+2\alpha\)। / For a solute producing three ions, \(i=1+2\alpha\).

Step 2

Why this answer is correct

\(2.2=1+2\alpha\), इसलिए \(2\alpha=1.2\)। / \(2.2=1+2\alpha\), so \(2\alpha=1.2\).

Step 3

Exam Tip

\(\alpha=0.6\), यानी (60%)। / \(\alpha=0.6\), or (60%).

Open Question Page
Ask Friends

कौन सा विकल्प द्विगुणन के लिए सही सीमा बताता है?

Which option gives the correct limiting value for complete dimerisation?

Explanation opens after your attempt
Correct Answer

A. (i=0.5)

Step 1

Concept

पूर्ण द्विगुणन में दो अणु मिलकर एक कण बनाते हैं। / In complete dimerisation, two molecules combine to form one particle.

Step 2

Why this answer is correct

इसलिए प्रभावी कण संख्या आधी रह जाती है। / Therefore, the effective particle count becomes half.

Step 3

Exam Tip

अतः सीमांत मान (i=0.5) होता है। / Hence the limiting value is (i=0.5).

Open Question Page
Ask Friends

यदि किसी पदार्थ का वास्तविक मोलर द्रव्यमान (72,g mol\(^{-1}) है और (i=2.4) है, तो मापा गया मोलर द्रव्यमान कितना होगा\)?

If a substance has true molar mass (72,g mol\(^{-1}) and (i=2.4), what will be the observed molar mass\)?

Explanation opens after your attempt
Correct Answer

A. (30,g mol\(^{-1})\)

Step 1

Concept

\((M_{\)obs\(}=\frac{M_{\)true}}{i}) लगाते हैं। \(/ Use (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{72}{2.4}=30\),g mol^{-1})। \(/ (M_{\)obs\(}=\frac{72}{2.4}=30\),g mol\(^{-1}).\)

Step 3

Exam Tip

(i>1) होने पर मोलर द्रव्यमान कम मापा जाता है। / When (i>1), the molar mass is measured lower.

Open Question Page
Ask Friends

समान मोललता वाले विलयनों में पूर्ण वियोजन मानने पर कौन सा न्यूनतम हिमांक देगा?

Among solutions of equal molality, which will give the lowest freezing point assuming complete dissociation?

Explanation opens after your attempt
Correct Answer

D. \(AlCl_3\)

Step 1

Concept

न्यूनतम हिमांक उस विलयन का होगा जिसमें हिमांक अवनमन अधिकतम है। / The lowest freezing point belongs to the solution with maximum depression.

Step 2

Why this answer is correct

पूर्ण वियोजन पर \(AlCl_3\) चार आयन देता है, इसलिए (i) सबसे अधिक है। / On complete dissociation, \(AlCl_3\) gives four ions, so (i) is highest.

Step 3

Exam Tip

अधिक (i) का अर्थ अधिक अवनमन और कम अंतिम हिमांक है। / Higher (i) means larger depression and lower final freezing point.

Open Question Page
Ask Friends

यदि (i=0.8) और केवल द्विगुणन हो रहा है, तो विलेय का कितना भाग सामान्य अणुओं के रूप में बचा रहेगा?

If (i=0.8) and only dimerisation is occurring, what fraction of the solute remains as normal molecules?

Explanation opens after your attempt
Correct Answer

B. (60%)

Step 1

Concept

द्विगुणन में \(i=1-\frac{\alpha}{2}\)। / For dimerisation, \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(0.8=1-\frac{\alpha}{2}\), इसलिए \(\alpha=0.4\)। / \(0.8=1-\frac{\alpha}{2}\), so \(\alpha=0.4\).

Step 3

Exam Tip

सामान्य बचा भाग \(1-\alpha=0.6\), यानी (60%) है। / The unassociated fraction is \(1-\alpha=0.6\), or (60%).

Open Question Page
Ask Friends

किसी \(A_3B\) लवण का (30%) वियोजन है। (i) का मान क्या होगा?

An \(A_3B\) salt is (30%) dissociated. What is the value of (i)?

Explanation opens after your attempt
Correct Answer

B. (1.9)

Step 1

Concept

\(A_3B\) पूर्ण वियोजन पर चार आयन देता है। / \(A_3B\) gives four ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.30(4-1)=1.9)। / (i=1+0.30(4-1)=1.9).

Step 3

Exam Tip

\(A_3B\) में तीन धनायन और एक ऋणायन मिलाकर चार आयन गिनें। / Count three cations and one anion, making four ions in \(A_3B\).

Open Question Page
Ask Friends

यदि किसी विलेय की परासरण दाब विधि से प्राप्त मोलर द्रव्यमान वास्तविक से कम है, तो कौन सा निष्कर्ष अधिक उचित है?

If the molar mass obtained by osmotic pressure method is lower than the true value, which conclusion is more suitable?

Explanation opens after your attempt
Correct Answer

A. विलेय का वियोजन हुआSolute underwent dissociation

Step 1

Concept

कम मापा मोलर द्रव्यमान बताता है कि (i>1) है। / Lower observed molar mass means (i>1).

Step 2

Why this answer is correct

(i>1) का अर्थ प्रभावी कण संख्या बढ़ना है। / (i>1) means the effective particle count increased.

Step 3

Exam Tip

यह सामान्यतः वियोजन से समझाया जाता है। / This is usually explained by dissociation.

Open Question Page
Ask Friends

किसी विलयन में \(BaCl_2\) का (50%) वियोजन है। (i) कितना होगा?

In a solution, \(BaCl_2\) is (50%) dissociated. What is (i)?

Explanation opens after your attempt
Correct Answer

B. (2.0)

Step 1

Concept

\(BaCl_2\) पूर्ण वियोजन पर तीन आयन देता है। / \(BaCl_2\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.50(3-1)=2.0)। / (i=1+0.50(3-1)=2.0).

Step 3

Exam Tip

दो क्लोराइड आयनों को अलग-अलग कण मानें। / Count the two chloride ions as separate particles.

Open Question Page
Ask Friends

यदि किसी विलेय का (i=1.25) है, तो उसकी सहगुणधर्मी मात्रा सामान्य से कितनी अधिक होगी?

If a solute has (i=1.25), how much higher will its colligative effect be than normal?

Explanation opens after your attempt
Correct Answer

A. (25%) अधिक(25%) higher

Step 1

Concept

सहगुणधर्मी प्रभाव (i) के अनुपात में बदलता है। / A colligative effect changes in proportion to (i).

Step 2

Why this answer is correct

(i=1.25) का अर्थ सामान्य का (1.25) गुना है। / (i=1.25) means (1.25) times the normal value.

Step 3

Exam Tip

यह सामान्य से (25%) अधिक प्रभाव है। / This is (25%) higher than normal.

Open Question Page
Ask Friends

एक अम्ल बेंजीन में (80%) द्विगुणित होता है। यदि वास्तविक मोलर द्रव्यमान (122,g mol\()^{-1}\) हो, तो मापा द्रव्यमान लगभग कितना होगा?

An acid is (80%) dimerised in benzene. If its true molar mass is (122,g mol\()^{-1}\), what will be the approximate observed molar mass?

Explanation opens after your attempt
Correct Answer

C. (203,g mol\(^{-1})\)

Step 1

Concept

(80%) द्विगुणन के लिए \(i=1-\frac{0.80}{2}=0.60\)। / For (80%) dimerisation, \(i=1-\frac{0.80}{2}=0.60\).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{122}{0.60}\approx203\),g mol^{-1})। \(/ (M_{\)obs\(}=\frac{122}{0.60}\approx203\),g mol\(^{-1}).\)

Step 3

Exam Tip

बेंजीन में अम्ल का द्विगुणन मोलर द्रव्यमान को अधिक दिखाता है। / Dimerisation of acids in benzene makes molar mass appear higher.

Open Question Page
Ask Friends

किसी \(AB_2\) लवण के (i=2.0) होने पर वियोजन प्रतिशत कितना होगा?

For an \(AB_2\) salt, if (i=2.0), what is the percentage dissociation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

\(AB_2\) तीन आयन देता है, इसलिए \(i=1+2\alpha\)। / \(AB_2\) gives three ions, so \(i=1+2\alpha\).

Step 2

Why this answer is correct

\(2=1+2\alpha\), अतः \(\alpha=0.5\)। / \(2=1+2\alpha\), hence \(\alpha=0.5\).

Step 3

Exam Tip

प्रतिशत वियोजन (50%) है। / The percentage dissociation is (50%).

Open Question Page
Ask Friends

यदि कोई विलेय सामान्यतः अवियोजित है और उसमें सहसंयोजन भी नहीं होता, तो चारों सहगुणधर्मी विधियों से (i) कैसा होना चाहिए?

If a solute is normally undissociated and does not undergo association, what should (i) be from all four colligative methods?

Explanation opens after your attempt
Correct Answer

A. लगभग (1)Approximately (1)

Step 1

Concept

सामान्य अवियोजित विलेय की प्रभावी कण संख्या नहीं बदलती। / A normal undissociated solute does not change effective particle number.

Step 2

Why this answer is correct

इसलिए (i=1) मिलता है। / Therefore, (i=1).

Step 3

Exam Tip

सभी सहगुणधर्मी विधियों में सामान्य व्यवहार का संकेत \(i\approx1\) है। / In all colligative methods, normal behaviour is indicated by \(i\approx1\).

Open Question Page
Ask Friends

किसी पदार्थ के लिए (i=3.25) है और वह पूर्ण वियोजन पर पांच आयन दे सकता है। वियोजन की मात्रा कितनी होगी?

For a substance, (i=3.25), and it can give five ions on complete dissociation. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (56.25%)

Step 1

Concept

पांच आयन देने वाले विलेय के लिए \(i=1+4\alpha\)। / For a solute producing five ions, \(i=1+4\alpha\).

Step 2

Why this answer is correct

\(3.25=1+4\alpha\), इसलिए \(4\alpha=2.25\)। / \(3.25=1+4\alpha\), so \(4\alpha=2.25\).

Step 3

Exam Tip

\(\alpha=0.5625\), यानी (56.25%)। / \(\alpha=0.5625\), or (56.25%).

Open Question Page
Ask Friends

यदि (60%) भाग सामान्य अणु रहे और (40%) भाग द्विगुणित हो जाए, तो (i) कितना होगा?

If (60%) remains as normal molecules and (40%) dimerises, what will be (i)?

Explanation opens after your attempt
Correct Answer

C. (0.80)

Step 1

Concept

सामान्य भाग (0.60) कण योगदान देता है। / The normal fraction contributes (0.60) particles.

Step 2

Why this answer is correct

द्विगुणित भाग \(\frac{0.40}{2}=0.20\) कण योगदान देता है। / The dimerised fraction contributes \(\frac{0.40}{2}=0.20\) particles.

Step 3

Exam Tip

कुल (i=0.60+0.20=0.80)। / Total (i=0.60+0.20=0.80).

Open Question Page
Ask Friends

किसी विलयन में (0.01) मोल \(A_2B_3\) का (60%) वियोजन होता है। प्रभावी कणों के मोल कितने होंगे?

In a solution, (0.01) mol of \(A_2B_3\) undergoes (60%) dissociation. How many moles of effective particles will be present?

Explanation opens after your attempt
Correct Answer

C. (0.034) मोल(0.034) mol

Step 1

Concept

\(A_2B_3\) पूर्ण वियोजन पर पांच आयन देता है, इसलिए (i=1+0.60(5-1)=3.4)। / \(A_2B_3\) gives five ions on complete dissociation, so (i=1+0.60(5-1)=3.4).

Step 2

Why this answer is correct

प्रभावी कणों के मोल \(0.01\times3.4=0.034\) होंगे। / Effective moles of particles \(=0.01\times3.4=0.034\).

Step 3

Exam Tip

पहले (i) निकालें, फिर प्रारंभिक मोल से गुणा करें। / First find (i), then multiply by initial moles.

Open Question Page
Ask Friends

किस विकल्प में सहसंयोजन के लिए सही संबंध दिया गया है?

Which option gives the correct relation for association?

Explanation opens after your attempt
Correct Answer

A. \(i=1-\alpha+\frac{\alpha}{m}\)

Step 1

Concept

(m)-गुण सहसंयोजन में कुछ कण सामान्य रहते हैं और कुछ (m) अणुओं के समूह बनाते हैं। / In (m)-fold association, some particles remain normal and some form groups of (m) molecules.

Step 2

Why this answer is correct

इसलिए कुल प्रभाव \(1-\alpha+\frac{\alpha}{m}\) होता है। / So the total effect is \(1-\alpha+\frac{\alpha}{m}\).

Step 3

Exam Tip

(1+\alpha(m-1)) वियोजन के लिए समान प्रकार का संबंध है, सहसंयोजन के लिए नहीं। / (1+\alpha(m-1)) is a dissociation-type expression, not association.

Open Question Page
Ask Friends

एक \(AB_3\) लवण के (25%) वियोजन पर मापा मोलर द्रव्यमान वास्तविक का कितना भाग होगा?

For (25%) dissociation of an \(AB_3\) salt, what fraction of the true molar mass will be observed?

Explanation opens after your attempt
Correct Answer

A. \(\frac{4}{7}\)

Step 1

Concept

\(AB_3\) चार आयन देता है, इसलिए (i=1+0.25(4-1)=1.75=\frac{7}{4})। / \(AB_3\) gives four ions, so (i=1+0.25(4-1)=1.75=\frac{7}{4}).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true}}{i})। \(/ (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 3

Exam Tip

इसलिए मापा द्रव्यमान \(\frac{4}{7}\) भाग होगा। / So the observed mass is \(\frac{4}{7}\) of the true mass.

Open Question Page
Ask Friends

यदि किसी विलेय का परासरण दाब सामान्य से (20%) कम है, तो (i) और संभावित कारण क्या हैं?

If the osmotic pressure of a solute is (20%) lower than normal, what are (i) and the likely cause?

Explanation opens after your attempt
Correct Answer

A. (i=0.8), सहसंयोजन(i=0.8), association

Step 1

Concept

(20%) कम परासरण दाब का अर्थ सामान्य का (0.80) गुना है। / (20%) lower osmotic pressure means (0.80) times the normal value.

Step 2

Why this answer is correct

इसलिए (i=0.8)। / Therefore, (i=0.8).

Step 3

Exam Tip

(i<1) बताता है कि कण संख्या घटकर सहसंयोजन हुआ हो सकता है। / Since (i<1), particle number may have decreased due to association.

Open Question Page
Ask Friends

किसी (1:3) विद्युत अपघट्य का (50%) वियोजन है। (i) कितना होगा?

A (1:3) electrolyte is (50%) dissociated. What will be (i)?

Explanation opens after your attempt
Correct Answer

C. (2.5)

Step 1

Concept

(1:3) विद्युत अपघट्य पूर्ण वियोजन पर चार आयन देता है। / A (1:3) electrolyte gives four ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.50(4-1)=2.5)। / (i=1+0.50(4-1)=2.5).

Step 3

Exam Tip

अनुपात (1:3) का अर्थ कुल (4) आयन है। / The ratio (1:3) means a total of (4) ions.

Open Question Page
Ask Friends

एक परीक्षा में किसी छात्र ने (i<1) देखकर वियोजन लिख दिया। सही सुधार क्या होगा?

In an exam, a student sees (i<1) and writes dissociation. What is the correct correction?

Explanation opens after your attempt
Correct Answer

A. (i<1) सहसंयोजन बताता है(i<1) indicates association

Step 1

Concept

(i<1) का अर्थ प्रभावी कण संख्या कम होना है।

Step 2

Why this answer is correct

कण संख्या घटने का कारण सहसंयोजन होता है, वियोजन नहीं। / A decrease in particle count is due to association, not dissociation.

Step 3

Exam Tip

परीक्षा में (i<1) को अधिक मापा मोलर द्रव्यमान से जोड़कर याद रखें। / In exams, connect (i<1) with higher observed molar mass.

Open Question Page
Ask Friends
FAQs

Class 12 Chemistry Quiz FAQs

How many questions are in this quiz?

This topic quiz currently has 150 active questions from the selected topic.

Is there a timer in this quiz?

Yes, the timer uses 25 seconds per question for Expert difficulty and shows the total remaining time on the page.

Can I open each question separately?

Yes, every question has its own SEO-friendly page with answer, explanation and related practice links.