Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects
Topic Wise MCQ

Chemistry 6: Molar Mass Determination MCQ Questions for Class 12 Science

Practice focused topic-wise MCQs with answers and explanations for quick revision and exam preparation.

Share

Start 6: Molar Mass Determination Topic Quiz

Difficulty select karke sirf is topic ke focused MCQs practice karein. Score, timer aur explanations student-friendly flow me milenge.

Topic Navigation

Continue Chapter Revision

6: Molar Mass Determination Practice Questions

Showing 391-400 of 600 questions.

Search

किसी मोलर द्रव्यमान निर्धारण प्रयोग में \(\Delta T_f\) अपेक्षित से अधिक मिला। यदि विलेय विद्युत अपघट्य है, तो सबसे उचित कारण क्या है?

In a molar mass determination experiment \(\Delta T_f\) is found greater than expected. If the solute is an electrolyte, what is the most suitable reason?

Explanation opens after your attempt
Correct Answer

A. विलेय का वियोजनDissociation of solute

Step 1

Concept

अधिक \(\Delta T_f\) अधिक अणुसंख्य प्रभाव दिखाता है। / Larger \(\Delta T_f\) shows a larger colligative effect.

Step 2

Why this answer is correct

विद्युत अपघट्य वियोजित होकर अधिक कण बनाता है। / An electrolyte dissociates and produces more particles.

Step 3

Exam Tip

इसलिए अपेक्षित से अधिक अवनमन को वियोजन से जोड़ें। / Therefore greater-than-expected depression is linked with dissociation.

Open Question Page
Ask Friends

किसी मोलर द्रव्यमान प्रयोग में \(\Delta T_b\) अपेक्षित से कम मिला। यदि विलेय कार्बनिक विलायक में अम्ल है, तो संभावित कारण क्या है?

In a molar mass experiment \(\Delta T_b\) is found lower than expected. If the solute is an acid in an organic solvent, what is the probable reason?

Explanation opens after your attempt
Correct Answer

A. द्विमर बननाDimer formation

Step 1

Concept

कम \(\Delta T_b\) कम प्रभावी कणों का संकेत देता है। / Lower \(\Delta T_b\) indicates fewer effective particles.

Step 2

Why this answer is correct

कार्बनिक विलायक में कुछ अम्ल द्विमर बना सकते हैं। / Some acids can form dimers in organic solvents.

Step 3

Exam Tip

द्विमर बनने पर मोलर द्रव्यमान अधिक और अणुसंख्य प्रभाव कम मिलता है। / Dimer formation gives higher molar mass and lower colligative effect.

Open Question Page
Ask Friends

किसी विलेय के (4,g) को (400,g) विलायक में घोलने पर \(\Delta T_f=0.50,K\) है। \(K_f=5.0,K,kg,mol^{-1}\) हो तो मोलर द्रव्यमान क्या होगा?

When (4,g) solute is dissolved in (400,g) solvent, \(\Delta T_f=0.50,K\). If \(K_f=5.0,K,kg,mol^{-1}\), what is the molar mass?

Explanation opens after your attempt
Correct Answer

C. \(100,g,mol^{-1}\)

Step 1

Concept

\(M_B=\frac{K_f w_B 1000}{\Delta T_f w_A}\) लगाएँ। / Use \(M_B=\frac{K_f w_B 1000}{\Delta T_f w_A}\).

Step 2

Why this answer is correct

\(M_B=\frac{5.0\times4\times1000}{0.50\times400}=100,g,mol^{-1}\) है। / \(M_B=\frac{5.0\times4\times1000}{0.50\times400}=100,g,mol^{-1}\).

Step 3

Exam Tip

बड़े आंकड़ों में शून्य काटने से पहले अनुपात सही रखें। / In larger numbers, keep the ratio correct before cancelling zeros.

Open Question Page
Ask Friends

यदि (2,g) विलेय (1,L) विलयन में (300,K) पर (0.492,atm) परासरण दाब देता है, तो \(R=0.082,L,atm,K^{-1},mol^{-1}\) लेकर मोलर द्रव्यमान कितना होगा?

If (2,g) solute in (1,L) solution gives osmotic pressure (0.492,atm) at (300,K), using \(R=0.082,L,atm,K^{-1},mol^{-1}\), what is the molar mass?

Explanation opens after your attempt
Correct Answer

B. \(100,g,mol^{-1}\)

Step 1

Concept

\(M=\frac{wRT}{\pi V}\) है। / \(M=\frac{wRT}{\pi V}\).

Step 2

Why this answer is correct

\(M=\frac{2\times0.082\times300}{0.492\times1}=100,g,mol^{-1}\) है। / \(M=\frac{2\times0.082\times300}{0.492\times1}=100,g,mol^{-1}\).

Step 3

Exam Tip

\(\pi V=nRT\) से भी यही परिणाम मिल सकता है। / The same result can also be obtained from \(\pi V=nRT\).

Open Question Page
Ask Friends

यदि किसी विलयन में (i=2) है पर विद्यार्थी ने मोलर द्रव्यमान निकालते समय (i=1) मान लिया, तो विद्युत अपघट्य के लिए प्रेक्षित मोलर द्रव्यमान के बारे में क्या होगा?

If a solution has (i=2) but a student assumes (i=1) while calculating molar mass, what happens for the electrolyte's observed molar mass?

Explanation opens after your attempt
Correct Answer

A. वह सामान्य से कम निकलेगाIt will come lower than normal

Step 1

Concept

(i=2) का अर्थ है कि कण संख्या सामान्य से दोगुनी है। / (i=2) means particle number is double the normal value.

Step 2

Why this answer is correct

यदि (i) न लगाया जाए तो बड़ा अणुसंख्य प्रभाव अधिक मोल के रूप में समझ लिया जाएगा। / If (i) is ignored, the larger colligative effect is treated as more moles.

Step 3

Exam Tip

इसलिए मोलर द्रव्यमान सामान्य से कम निकलेगा। / Therefore molar mass comes lower than normal.

Open Question Page
Ask Friends

मोलर द्रव्यमान निर्धारण में वाष्प दाब विधि अपेक्षाकृत कठिन क्यों मानी जाती है?

Why is the vapour pressure method considered comparatively difficult in molar mass determination?

Explanation opens after your attempt
Correct Answer

A. क्योंकि वाष्प दाब में छोटी कमी को सही मापना कठिन हो सकता हैBecause a small lowering of vapour pressure can be difficult to measure accurately

Step 1

Concept

वाष्प दाब में कमी अक्सर छोटी होती है। / Lowering of vapour pressure is often small.

Step 2

Why this answer is correct

छोटी कमी की माप में प्रयोगात्मक त्रुटि का असर बड़ा हो सकता है। / Experimental error can strongly affect such small measurements.

Step 3

Exam Tip

इसी कारण कई बार परासरण दाब या तापांतर विधि अधिक सुविधाजनक होती है। / That is why osmotic pressure or temperature methods are often more convenient.

Open Question Page
Ask Friends

किसी विलयन में वाष्प दाब में आपेक्षिक कमी (0.02) है। यदि कुल मोल (5) हैं, तो विलेय के मोल कितने हैं?

A solution has relative lowering of vapour pressure (0.02). If total moles are (5), how many moles of solute are present?

Explanation opens after your attempt
Correct Answer

C. (0.10) मोल(0.10) mole

Step 1

Concept

आपेक्षिक कमी विलेय के मोल अंश के बराबर है। / Relative lowering equals mole fraction of solute.

Step 2

Why this answer is correct

\((X_{\)विलेय\(}=\frac{n_{\)विलेय\(}}{5}=0.02), इसलिए (n_{\)विलेय}=0.10) मोल है। \(/ (X_{\)solute\(}=\frac{n_{\)solute\(}}{5}=0.02), so (n_{\)solute\(}=0.10) mole.\)

Step 3

Exam Tip

मोल अंश निकालते समय कुल मोल को हर में रखें। / While finding mole fraction, total moles go in the denominator.

Open Question Page
Ask Friends

यदि (0.10) मोल विलेय का द्रव्यमान (9.0,g) है और अणुसंख्य गुण से वही मोल प्राप्त होते हैं, तो मोलर द्रव्यमान कितना होगा?

If (0.10) mole solute has mass (9.0,g) and the same moles are obtained from colligative property, what is the molar mass?

Explanation opens after your attempt
Correct Answer

C. \(90,g,mol^{-1}\)

Step 1

Concept

\(मोलर द्रव्यमान (M=\frac{\)द्रव्यमान}{मोल}) है। \(/ Molar mass (M=\frac{\)mass}{moles}).

Step 2

Why this answer is correct

\(M=\frac{9.0}{0.10}=90,g,mol^{-1}\) होगा। / \(M=\frac{9.0}{0.10}=90,g,mol^{-1}\).

Step 3

Exam Tip

अणुसंख्य गुण अंत में विलेय के मोल तक पहुँचाते हैं। / Colligative properties finally help us reach moles of solute.

Open Question Page
Ask Friends

एक नमूने का सामान्य मोलर द्रव्यमान \(98,g,mol^{-1}\) है। प्रयोग में \(49,g,mol^{-1}\) मिलता है। इस परिणाम को सही समझाने के लिए कौन सा कथन उचित है?

A sample has normal molar mass \(98,g,mol^{-1}\). Experiment gives \(49,g,mol^{-1}\). Which statement suitably explains this result?

Explanation opens after your attempt
Correct Answer

A. विलेय ने प्रभावी कणों की संख्या दोगुनी कर दीThe solute doubled the number of effective particles

Step 1

Concept

\(i=\frac{98}{49}=2\) है। / \(i=\frac{98}{49}=2\).

Step 2

Why this answer is correct

(i=2) का अर्थ है प्रभावी कण संख्या सामान्य की दोगुनी हो गई। / (i=2) means effective particle number became double of normal.

Step 3

Exam Tip

ऐसा परिणाम प्रायः वियोजन से मिलता है। / Such a result usually comes from dissociation.

Open Question Page
Ask Friends

किसी प्रोटीन के मोलर द्रव्यमान निर्धारण के लिए (0.001,M) विलयन बनाया गया। इतने तनु विलयन में कौन सा मापन सबसे अधिक उपयोगी रहेगा?

A (0.001,M) solution is prepared for determining the molar mass of a protein. Which measurement will be most useful in such a dilute solution?

Explanation opens after your attempt
Correct Answer

A. परासरण दाबOsmotic pressure

Step 1

Concept

प्रोटीन बड़े अणु होते हैं और उनके विलयन बहुत तनु रखे जाते हैं। / Proteins are large molecules and their solutions are kept very dilute.

Step 2

Why this answer is correct

इतने तनु विलयन में तापांतर बहुत छोटा हो सकता है, पर परासरण दाब मापा जा सकता है। / In such dilute solutions temperature changes may be very small, but osmotic pressure can be measured.

Step 3

Exam Tip

बड़े जैव अणुओं के लिए परासरण दाब विधि सबसे उपयुक्त याद रखें। / For large biomolecules, remember osmotic pressure method as most suitable.

Open Question Page
Ask Friends