किसी आदर्श विलयन में शुद्ध विलायक का वाष्प दाब 90 किलोपास्कल है और विलायक का मोल अंश 0.70 है। विलयन का वाष्प दाब कितना होगा?
In an ideal solution, the vapour pressure of the pure solvent is 90 kPa and the mole fraction of solvent is 0.70. What will be the vapour pressure of the solution?
#vapour pressure
#raoults law
#numerical
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 63 किलोपास्कल / 63 kPa
B 27 किलोपास्कल / 27 kPa
C 90 किलोपास्कल / 90 kPa
D 70 किलोपास्कल / 70 kPa
Explanation opens after your attempt
Correct Answer
A. 63 किलोपास्कल / 63 kPa
Step 1
Concept
अवाष्पशील विलेय वाले आदर्श विलयन में विलयन का वाष्प दाब विलायक के मोल अंश पर निर्भर करता है। / For an ideal solution with a non-volatile solute, solution vapour pressure depends on solvent mole fraction.
Step 2
Why this answer is correct
\(90 \times 0.70 = 63\) किलोपास्कल। / \(90 \times 0.70 = 63\) kPa.
Step 3
Exam Tip
ऐसे प्रश्नों में शुद्ध विलायक के दाब को विलायक के मोल अंश से गुणा करें। / Multiply pure solvent pressure by solvent mole fraction.
Login to save your score, XP, coins and progress. Login
शुद्ध विलायक का वाष्प दाब 100 किलोपास्कल है और विलयन का वाष्प दाब 82 किलोपास्कल है। वाष्प दाब में सापेक्ष कमी कितनी होगी?
The vapour pressure of pure solvent is 100 kPa and the vapour pressure of solution is 82 kPa. What is the relative lowering of vapour pressure?
#relative lowering
#vapour pressure
#numerical
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 0.18
B 0.82
C 18 किलोपास्कल / 18 kPa
D 1.22
Explanation opens after your attempt
Step 1
Concept
पहले वाष्प दाब में कमी निकालें, (100 - 82 = 18) किलोपास्कल। / First find lowering, (100 - 82 = 18) kPa.
Step 2
Why this answer is correct
सापेक्ष कमी (18/100 = 0.18) होगी। / Relative lowering is (18/100 = 0.18).
Step 3
Exam Tip
सापेक्ष कमी मात्रक रहित होती है, इसलिए इसे दाब की इकाई में न लिखें। / Relative lowering is unitless, so do not write it with pressure units.
Login to save your score, XP, coins and progress. Login
जब किसी विलयन में वास्तविक वाष्प दाब आदर्श मान से अधिक आता है, तो अणुओं के बीच किस प्रकार का आकर्षण संकेतित होता है?
When the actual vapour pressure of a solution is higher than the ideal value, what type of molecular attraction is indicated?
#positive deviation
#molecular attraction
#raoults law
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A भिन्न अणुओं के बीच कमजोर आकर्षण / weak attraction between unlike molecules
B भिन्न अणुओं के बीच बहुत मजबूत आकर्षण / very strong attraction between unlike molecules
C समान अणुओं के बीच आकर्षण समाप्त / attraction between like molecules becomes zero
D सभी अणु आयन बन जाते हैं / all molecules become ions
Explanation opens after your attempt
Correct Answer
A. भिन्न अणुओं के बीच कमजोर आकर्षण / weak attraction between unlike molecules
Step 1
Concept
आदर्श मान से अधिक वाष्प दाब धनात्मक विचलन दिखाता है। / Vapour pressure higher than ideal value indicates positive deviation.
Step 2
Why this answer is correct
धनात्मक विचलन तब होता है जब भिन्न अणु एक-दूसरे को अपेक्षाकृत कम आकर्षित करते हैं। / Positive deviation occurs when unlike molecules attract each other less strongly.
Step 3
Exam Tip
अधिक वाष्प दाब को आसान वाष्पन और कमजोर आकर्षण से जोड़ें। / Connect higher vapour pressure with easier escape and weaker attraction.
Login to save your score, XP, coins and progress. Login
यदि दो द्रवों के मिश्रण में कुल वाष्प दाब आदर्श मान से कम है, तो कौन सा निष्कर्ष सही है?
If the total vapour pressure of a liquid mixture is lower than the ideal value, which conclusion is correct?
#negative deviation
#total vapour pressure
#ideal solution
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A मिश्रण ऋणात्मक विचलन दिखाता है / mixture shows negative deviation
B मिश्रण धनात्मक विचलन दिखाता है / mixture shows positive deviation
C मिश्रण में कोई वाष्प नहीं बनता / no vapour forms in the mixture
D मिश्रण हमेशा आदर्श होता है / mixture is always ideal
Explanation opens after your attempt
Correct Answer
A. मिश्रण ऋणात्मक विचलन दिखाता है / mixture shows negative deviation
Step 1
Concept
तुलना वास्तविक दाब और आदर्श दाब से करें। / Compare actual pressure with ideal pressure.
Step 2
Why this answer is correct
वास्तविक दाब कम होने पर अणु कम आसानी से वाष्प में जाते हैं, इसलिए ऋणात्मक विचलन होता है। / If actual pressure is lower, molecules escape less easily, giving negative deviation.
Step 3
Exam Tip
कम दाब को ऋणात्मक विचलन से याद रखें। / Remember lower pressure as negative deviation.
Login to save your score, XP, coins and progress. Login
किसी आदर्श द्विघटकीय विलयन में घटक क और ख दोनों वाष्पशील हैं। कुल वाष्प दाब कैसे निकलेगा?
In an ideal binary solution, both components A and B are volatile. How is total vapour pressure obtained?
#binary solution
#partial pressure
#total pressure
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A दोनों घटकों के आंशिक वाष्प दाब जोड़कर / by adding partial vapour pressures of both components
B केवल घटक क का दाब लेकर / by taking only pressure of component A
C केवल घटक ख का दाब लेकर / by taking only pressure of component B
D दोनों दाबों को घटाकर / by subtracting the two pressures
Explanation opens after your attempt
Correct Answer
A. दोनों घटकों के आंशिक वाष्प दाब जोड़कर / by adding partial vapour pressures of both components
Step 1
Concept
वाष्पशील घटक वाष्प अवस्था में योगदान देते हैं। / Volatile components contribute to vapour phase.
Step 2
Why this answer is correct
कुल वाष्प दाब सभी आंशिक दाबों का योग होता है। / Total vapour pressure is the sum of all partial vapour pressures.
Step 3
Exam Tip
वाष्पशील मिश्रणों में किसी एक घटक को अकेला न लें। / Do not ignore one component in volatile liquid mixtures.
Login to save your score, XP, coins and progress. Login
एक विलयन में अवाष्पशील विलेय का मोल अंश 0.15 है। शुद्ध विलायक का वाष्प दाब 80 किलोपास्कल है। वाष्प दाब में कमी कितनी होगी?
A solution has mole fraction of non-volatile solute 0.15. The pure solvent vapour pressure is 80 kPa. What is the lowering of vapour pressure?
#lowering of vapour pressure
#non volatile solute
#numerical
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 12 किलोपास्कल / 12 kPa
B 68 किलोपास्कल / 68 kPa
C 15 किलोपास्कल / 15 kPa
D 80 किलोपास्कल / 80 kPa
Explanation opens after your attempt
Correct Answer
A. 12 किलोपास्कल / 12 kPa
Step 1
Concept
अवाष्पशील विलेय के लिए सापेक्ष कमी विलेय के मोल अंश के बराबर होती है। / For a non-volatile solute, relative lowering equals solute mole fraction.
Step 2
Why this answer is correct
वास्तविक कमी \(0.15 \times 80 = 12\) किलोपास्कल है। / Actual lowering is \(0.15 \times 80 = 12\) kPa.
Step 3
Exam Tip
सापेक्ष कमी और वास्तविक कमी में अंतर साफ रखें। / Keep relative lowering and actual lowering separate.
Login to save your score, XP, coins and progress. Login
विलयन में अवाष्पशील विलेय जोड़ने पर विलायक का वाष्प दाब घटता है, इसका सबसे सही सूक्ष्म कारण क्या है?
When a non-volatile solute is added to a solvent, why does the solvent vapour pressure decrease at molecular level?
#non volatile solute
#solvent escaping tendency
#concept
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A विलायक अणुओं की सतह से निकलने की प्रवृत्ति घटती है / escaping tendency of solvent molecules from surface decreases
B विलायक का रासायनिक सूत्र बदल जाता है / chemical formula of solvent changes
C विलेय पूरा वाष्प बनकर निकल जाता है / solute completely escapes as vapour
D द्रव का ताप हमेशा शून्य हो जाता है / temperature of liquid always becomes zero
Explanation opens after your attempt
Correct Answer
A. विलायक अणुओं की सतह से निकलने की प्रवृत्ति घटती है / escaping tendency of solvent molecules from surface decreases
Step 1
Concept
अवाष्पशील विलेय स्वयं वाष्प नहीं बनाता। / A non-volatile solute does not form vapour.
Step 2
Why this answer is correct
वह विलायक अणुओं के लिए सतह और मुक्त स्थान की उपलब्धता घटाता है। / It reduces availability and escaping tendency of solvent molecules at the surface.
Step 3
Exam Tip
वाष्प दाब घटने का कारण रासायनिक बदलाव नहीं, वाष्पन प्रवृत्ति में कमी है। / The decrease is due to reduced escaping tendency, not chemical change.
Login to save your score, XP, coins and progress. Login
एक द्रव का वाष्प दाब अधिक है। उसी ताप पर दूसरे द्रव का वाष्प दाब कम है। पहले द्रव के बारे में कौन सा कथन अधिक उचित है?
A liquid has high vapour pressure. Another liquid has low vapour pressure at the same temperature. Which statement about the first liquid is more suitable?
#volatility
#vapour pressure
#boiling point
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A वह अधिक वाष्पशील है / it is more volatile
B उसका वाष्पन असंभव है / its vaporisation is impossible
C उसके अणुओं में आकर्षण अनंत है / its molecular attraction is infinite
D उसका क्वथनांक अवश्य बहुत अधिक है / its boiling point must be very high
Explanation opens after your attempt
Correct Answer
A. वह अधिक वाष्पशील है / it is more volatile
Step 1
Concept
अधिक वाष्प दाब का अर्थ है कि अणु आसानी से वाष्प अवस्था में जाते हैं। / Higher vapour pressure means molecules escape more easily.
Step 2
Why this answer is correct
ऐसी प्रवृत्ति को अधिक वाष्पशीलता कहते हैं। / This indicates greater volatility.
Step 3
Exam Tip
अधिक वाष्पशील द्रवों का क्वथनांक सामान्यतः कम होता है। / More volatile liquids generally have lower boiling points.
Login to save your score, XP, coins and progress. Login
आदर्श विलयन में घटक क का शुद्ध वाष्प दाब 150 किलोपास्कल और घटक ख का 50 किलोपास्कल है। यदि घटक क का मोल अंश 0.25 है तो कुल दाब कितना होगा?
In an ideal solution, pure vapour pressure of component A is 150 kPa and that of component B is 50 kPa. If mole fraction of A is 0.25, what is total pressure?
#ideal binary solution
#total pressure
#numerical
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 75 किलोपास्कल / 75 kPa
B 100 किलोपास्कल / 100 kPa
C 125 किलोपास्कल / 125 kPa
D 150 किलोपास्कल / 150 kPa
Explanation opens after your attempt
Correct Answer
A. 75 किलोपास्कल / 75 kPa
Step 1
Concept
घटक क का आंशिक दाब \(0.25 \times 150 = 37.5\) किलोपास्कल। / Partial pressure of A is \(0.25 \times 150 = 37.5\) kPa.
Step 2
Why this answer is correct
घटक ख का मोल अंश 0.75 है, इसलिए उसका आंशिक दाब \(0.75 \times 50 = 37.5\) किलोपास्कल। / Mole fraction of B is 0.75, so its partial pressure is \(0.75 \times 50 = 37.5\) kPa.
Step 3
Exam Tip
कुल दाब (37.5 + 37.5 = 75) किलोपास्कल होगा। / Total pressure is (37.5 + 37.5 = 75) kPa.
Login to save your score, XP, coins and progress. Login
किस कथन में राउल्ट के नियम का सही भाव दिया गया है?
Which statement gives the correct idea of Raoult's law?
#raoults law
#mole fraction
#partial vapour pressure
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A किसी घटक का आंशिक वाष्प दाब उसके द्रव मोल अंश के समानुपाती होता है / partial vapour pressure of a component is proportional to its liquid mole fraction
B किसी घटक का दाब केवल पात्र के आकार पर निर्भर करता है / pressure of a component depends only on vessel size
C वाष्प दाब हमेशा शून्य होता है / vapour pressure is always zero
D विलयन में मोल अंश का कोई महत्व नहीं / mole fraction has no importance in solution
Explanation opens after your attempt
Correct Answer
A. किसी घटक का आंशिक वाष्प दाब उसके द्रव मोल अंश के समानुपाती होता है / partial vapour pressure of a component is proportional to its liquid mole fraction
Step 1
Concept
राउल्ट का नियम द्रव अवस्था की संरचना और वाष्प दाब को जोड़ता है। / Raoult's law connects liquid phase composition with vapour pressure.
Step 2
Why this answer is correct
घटक का मोल अंश जितना अधिक होगा, उसका आंशिक दाब उतना अधिक होगा। / Higher mole fraction of a component gives higher partial pressure.
Step 3
Exam Tip
इस नियम में मोल अंश मुख्य संकेतक है। / Mole fraction is the key quantity in this law.
Login to save your score, XP, coins and progress. Login
किस स्थिति में विलयन का वाष्प दाब शुद्ध विलायक के वाष्प दाब के बराबर हो सकता है?
In which situation can the vapour pressure of a solution be equal to that of the pure solvent?
#pure solvent
#mole fraction
#vapour pressure
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A जब विलेय का मोल अंश शून्य हो / when mole fraction of solute is zero
B जब विलेय अवाष्पशील हो और अधिक मात्रा में हो / when non-volatile solute is present in large amount
C जब विलायक का मोल अंश आधा हो / when solvent mole fraction is half
D जब विलयन बहुत रंगीन हो / when solution is highly coloured
Explanation opens after your attempt
Correct Answer
A. जब विलेय का मोल अंश शून्य हो / when mole fraction of solute is zero
Step 1
Concept
अवाष्पशील विलेय मिलाने से वाष्प दाब घटता है। / Adding a non-volatile solute lowers vapour pressure.
Step 2
Why this answer is correct
शुद्ध विलायक जैसा दाब तभी रहेगा जब विलेय न हो, यानी विलेय का मोल अंश शून्य हो। / Pressure remains equal to pure solvent only when no solute is present.
Step 3
Exam Tip
बराबरी वाले प्रश्न में शुद्ध अवस्था की शर्त पहचानें। / For equality questions, identify the pure solvent condition.
Login to save your score, XP, coins and progress. Login
ताप बढ़ाने पर किसी शुद्ध द्रव का वाष्प दाब बढ़ने का प्रमुख कारण क्या है?
What is the main reason for increase in vapour pressure of a pure liquid when temperature increases?
#temperature
#kinetic energy
#vapour pressure
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A अणुओं की औसत गतिज ऊर्जा बढ़ती है / average kinetic energy of molecules increases
B अणुओं का द्रव्यमान बढ़ जाता है / mass of molecules increases
C द्रव का नाम बदल जाता है / name of liquid changes
D बाह्य दाब हमेशा घट जाता है / external pressure always decreases
Explanation opens after your attempt
Correct Answer
A. अणुओं की औसत गतिज ऊर्जा बढ़ती है / average kinetic energy of molecules increases
Step 1
Concept
ताप बढ़ने से अणु अधिक ऊर्जा प्राप्त करते हैं। / Increase in temperature gives more energy to molecules.
Step 2
Why this answer is correct
अधिक ऊर्जा वाले अणु सतह से निकलकर वाष्प अवस्था में जाते हैं। / More energetic molecules escape from the surface into vapour phase.
Step 3
Exam Tip
वाष्प दाब और तापमान का संबंध ऊर्जा के आधार पर समझें। / Understand vapour pressure-temperature relation through molecular energy.
Login to save your score, XP, coins and progress. Login
संतुलन वाष्प दाब को द्रव की मात्रा से स्वतंत्र क्यों माना जाता है, यदि पात्र में द्रव बचा हो?
Why is equilibrium vapour pressure considered independent of amount of liquid if some liquid remains in the vessel?
#equilibrium vapour pressure
#amount of liquid
#closed vessel
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A क्योंकि निश्चित ताप पर वाष्प-द्रव संतुलन एक निश्चित दाब देता है / because vapour-liquid equilibrium gives a fixed pressure at constant temperature
B क्योंकि द्रव की मात्रा कभी बदलती नहीं / because amount of liquid never changes
C क्योंकि वाष्प दाब केवल रंग पर निर्भर करता है / because vapour pressure depends only on colour
D क्योंकि वाष्प अणु द्रव में लौटते ही नहीं / because vapour molecules never return to liquid
Explanation opens after your attempt
Correct Answer
A. क्योंकि निश्चित ताप पर वाष्प-द्रव संतुलन एक निश्चित दाब देता है / because vapour-liquid equilibrium gives a fixed pressure at constant temperature
Step 1
Concept
बंद पात्र में वाष्पन और संघनन साथ-साथ चलते हैं। / In a closed vessel, vaporisation and condensation occur together.
Step 2
Why this answer is correct
जब द्रव बचा हो, संतुलन पर निश्चित ताप के लिए दाब निश्चित हो जाता है। / If liquid remains, equilibrium pressure is fixed at a given temperature.
Step 3
Exam Tip
मात्रा बदलने से संतुलन दाब नहीं बदलता, जब तक द्रव मौजूद है। / Amount does not change equilibrium pressure as long as liquid is present.
Login to save your score, XP, coins and progress. Login
किसी वाष्पशील द्रव मिश्रण में वाष्प अवस्था अधिक वाष्पशील घटक से समृद्ध क्यों होती है?
Why is the vapour phase richer in the more volatile component in a volatile liquid mixture?
#volatile component
#vapour phase
#distillation
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A क्योंकि उसका शुद्ध वाष्प दाब अधिक होता है / because its pure vapour pressure is higher
B क्योंकि वह हमेशा भारी होता है / because it is always heavier
C क्योंकि वह द्रव अवस्था में रहता ही नहीं / because it never remains in liquid phase
D क्योंकि उसका मोल अंश हमेशा एक होता है / because its mole fraction is always one
Explanation opens after your attempt
Correct Answer
A. क्योंकि उसका शुद्ध वाष्प दाब अधिक होता है / because its pure vapour pressure is higher
Step 1
Concept
अधिक वाष्पशील घटक का वाष्प बनने की प्रवृत्ति अधिक होती है। / The more volatile component has greater tendency to vaporise.
Step 2
Why this answer is correct
उसका आंशिक वाष्प दाब अधिक योगदान दे सकता है। / It can contribute a larger partial vapour pressure.
Step 3
Exam Tip
आसवन में यही कारण अलगाव को आसान बनाता है। / This principle helps in separation by distillation.
Login to save your score, XP, coins and progress. Login
एक आदर्श विलयन में घटक क का आंशिक दाब 24 किलोपास्कल और कुल दाब 60 किलोपास्कल है। वाष्प अवस्था में घटक क का मोल अंश कितना होगा?
In an ideal solution, partial pressure of component A is 24 kPa and total pressure is 60 kPa. What is the mole fraction of A in vapour phase?
#vapour composition
#partial pressure
#numerical
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 0.40
B 0.24
C 0.60
D 2.50
Explanation opens after your attempt
Step 1
Concept
वाष्प अवस्था का मोल अंश आंशिक दाब को कुल दाब से भाग देने पर मिलता है। / Vapour phase mole fraction equals partial pressure divided by total pressure.
Step 2
Why this answer is correct
(24/60 = 0.40) है। / (24/60 = 0.40).
Step 3
Exam Tip
वाष्प संरचना में दाबों का अनुपात प्रयोग करें। / Use ratio of pressures for vapour composition.
Login to save your score, XP, coins and progress. Login
यदि किसी अवाष्पशील विलेय का मोल अंश बढ़ाया जाए तो विलयन के वाष्प दाब पर क्या प्रभाव होगा?
If the mole fraction of a non-volatile solute is increased, what happens to the vapour pressure of the solution?
#solute mole fraction
#non volatile solute
#vapour pressure
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A वाष्प दाब घटेगा / vapour pressure decreases
B वाष्प दाब बढ़ेगा / vapour pressure increases
C वाष्प दाब शुद्ध विलायक जितना रहेगा / vapour pressure remains equal to pure solvent
D वाष्प दाब का ताप से संबंध समाप्त होगा / relation with temperature disappears
Explanation opens after your attempt
Correct Answer
A. वाष्प दाब घटेगा / vapour pressure decreases
Step 1
Concept
विलेय का मोल अंश बढ़ने पर विलायक का मोल अंश घटता है। / Increasing solute mole fraction decreases solvent mole fraction.
Step 2
Why this answer is correct
अवाष्पशील विलेय स्वयं वाष्प दाब नहीं देता, इसलिए कुल दाब घटता है। / A non-volatile solute does not contribute vapour pressure, so total pressure decreases.
Step 3
Exam Tip
विलेय बढ़े तो विलायक की वाष्पन प्रवृत्ति कम समझें। / More solute means lower escaping tendency of solvent.
Login to save your score, XP, coins and progress. Login
यदि शुद्ध विलायक का वाष्प दाब 72 किलोपास्कल है और विलयन का वाष्प दाब 54 किलोपास्कल है, तो अवाष्पशील विलेय का मोल अंश क्या होगा?
If pure solvent vapour pressure is 72 kPa and solution vapour pressure is 54 kPa, what is the mole fraction of non-volatile solute?
#mole fraction
#relative lowering
#numerical
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 0.25
B 0.50
C 0.75
D 0.18
Explanation opens after your attempt
Step 1
Concept
वाष्प दाब में कमी (72 - 54 = 18) किलोपास्कल है। / Lowering is (72 - 54 = 18) kPa.
Step 2
Why this answer is correct
सापेक्ष कमी (18/72 = 0.25) है। / Relative lowering is (18/72 = 0.25).
Step 3
Exam Tip
अवाष्पशील विलेय के लिए यही विलेय का मोल अंश है। / For a non-volatile solute, this equals solute mole fraction.
Login to save your score, XP, coins and progress. Login
धनात्मक विचलन वाले विलयन में मिश्रण पर आयतन परिवर्तन के बारे में कौन सा कथन सामान्यतः सही हो सकता है?
In a solution showing positive deviation, which statement about volume change on mixing can generally be true?
#positive deviation
#volume change
#non ideal solution
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A आयतन में वृद्धि हो सकती है / volume may increase
B आयतन हमेशा शून्य ही रहता है / volume always remains exactly zero
C आयतन अनिवार्य रूप से शून्य से कम नहीं हो सकता / volume must not change at all
D विलयन बनता ही नहीं / solution never forms
Explanation opens after your attempt
Correct Answer
A. आयतन में वृद्धि हो सकती है / volume may increase
Step 1
Concept
धनात्मक विचलन में भिन्न अणुओं का आकर्षण कमजोर होता है। / In positive deviation, unlike molecular attraction is weaker.
Step 2
Why this answer is correct
कमजोर आकर्षण के कारण अणु अपेक्षाकृत दूर रह सकते हैं और आयतन बढ़ सकता है। / Molecules may stay relatively farther apart, so volume may increase.
Step 3
Exam Tip
इसे वाष्प दाब के अधिक होने से जोड़कर समझें। / Relate this with higher vapour pressure.
Login to save your score, XP, coins and progress. Login
ऋणात्मक विचलन वाले विलयन में मिश्रण की ऊष्मा के बारे में कौन सा कथन सामान्यतः सही है?
In a solution showing negative deviation, which statement about heat of mixing is generally correct?
#negative deviation
#heat of mixing
#molecular interaction
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A ऊष्मा निकल सकती है / heat may be released
B ऊष्मा कभी नहीं निकलती / heat is never released
C ऊष्मा हमेशा अनंत होती है / heat is always infinite
D ऊष्मा का वाष्प दाब से कोई संबंध नहीं / heat has no relation with vapour pressure
Explanation opens after your attempt
Correct Answer
A. ऊष्मा निकल सकती है / heat may be released
Step 1
Concept
ऋणात्मक विचलन में भिन्न अणुओं का आकर्षण अधिक मजबूत होता है। / In negative deviation, unlike molecular attractions are stronger.
Step 2
Why this answer is correct
मजबूत आकर्षण बनने पर ऊर्जा निकल सकती है। / Formation of stronger attractions may release heat.
Step 3
Exam Tip
मजबूत आकर्षण को कम वाष्प दाब और ऊष्मा निकलने से जोड़ें। / Connect stronger attraction with lower vapour pressure and heat release.
Login to save your score, XP, coins and progress. Login
किस प्रकार का मिश्रण न्यूनतम क्वथनांक अजियोट्रोप बना सकता है?
Which type of mixture can form a minimum boiling azeotrope?
#azeotrope
#minimum boiling
#positive deviation
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A धनात्मक विचलन दिखाने वाला मिश्रण / mixture showing positive deviation
B ऋणात्मक विचलन दिखाने वाला मिश्रण / mixture showing negative deviation
C पूर्ण आदर्श मिश्रण / perfectly ideal mixture
D केवल शुद्ध विलायक / pure solvent only
Explanation opens after your attempt
Correct Answer
A. धनात्मक विचलन दिखाने वाला मिश्रण / mixture showing positive deviation
Step 1
Concept
धनात्मक विचलन में वास्तविक वाष्प दाब अपेक्षित से अधिक होता है। / In positive deviation, actual vapour pressure is higher than expected.
Step 2
Why this answer is correct
अधिक वाष्प दाब के कारण मिश्रण कम ताप पर उबल सकता है। / Higher vapour pressure can make the mixture boil at lower temperature.
Step 3
Exam Tip
न्यूनतम क्वथनांक अजियोट्रोप को धनात्मक विचलन से जोड़ें। / Link minimum boiling azeotrope with positive deviation.
Login to save your score, XP, coins and progress. Login
किस प्रकार का मिश्रण अधिकतम क्वथनांक अजियोट्रोप बना सकता है?
Which type of mixture can form a maximum boiling azeotrope?
#azeotrope
#maximum boiling
#negative deviation
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A ऋणात्मक विचलन दिखाने वाला मिश्रण / mixture showing negative deviation
B धनात्मक विचलन दिखाने वाला मिश्रण / mixture showing positive deviation
C कोई भी आदर्श गैस / any ideal gas
D केवल अवाष्पशील ठोस / only non-volatile solid
Explanation opens after your attempt
Correct Answer
A. ऋणात्मक विचलन दिखाने वाला मिश्रण / mixture showing negative deviation
Step 1
Concept
ऋणात्मक विचलन में वाष्प दाब अपेक्षित से कम होता है। / Negative deviation gives lower vapour pressure than expected.
Step 2
Why this answer is correct
कम वाष्प दाब होने पर उबलने के लिए अधिक ताप चाहिए। / Lower vapour pressure requires higher temperature for boiling.
Step 3
Exam Tip
अधिकतम क्वथनांक अजियोट्रोप को ऋणात्मक विचलन से याद रखें। / Remember maximum boiling azeotrope with negative deviation.
Login to save your score, XP, coins and progress. Login
बेंजीन और टोलुईन का मिश्रण लगभग आदर्श व्यवहार क्यों दिखा सकता है?
Why can a mixture of benzene and toluene show nearly ideal behaviour?
#benzene
#toluene
#ideal solution
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A दोनों के अणुओं की प्रकृति और आकर्षण लगभग समान हैं / their molecular nature and attractions are nearly similar
B दोनों में कोई अणु नहीं होता / both have no molecules
C दोनों पूरी तरह आयनिक हैं / both are completely ionic
D दोनों का वाष्प दाब हमेशा शून्य है / vapour pressure of both is always zero
Explanation opens after your attempt
Correct Answer
A. दोनों के अणुओं की प्रकृति और आकर्षण लगभग समान हैं / their molecular nature and attractions are nearly similar
Step 1
Concept
आदर्श व्यवहार के लिए समान अणुओं और भिन्न अणुओं के आकर्षण लगभग बराबर होने चाहिए। / For ideal behaviour, like-like and unlike attractions should be nearly equal.
Step 2
Why this answer is correct
बेंजीन और टोलुईन में समानता अधिक है। / Benzene and toluene are quite similar in nature.
Step 3
Exam Tip
समान प्रकृति वाले द्रवों में विचलन कम होता है। / Liquids of similar nature usually show small deviation.
Login to save your score, XP, coins and progress. Login
एसीटोन और क्लोरोफॉर्म के मिश्रण में ऋणात्मक विचलन का कारण क्या माना जाता है?
What is considered the reason for negative deviation in a mixture of acetone and chloroform?
#acetone
#chloroform
#negative deviation
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A भिन्न अणुओं के बीच विशेष आकर्षण / specific attraction between unlike molecules
B दोनों का पूर्ण अपघटन / complete dissociation of both
C दोनों का वाष्प दाब शून्य होना / zero vapour pressure of both
D दोनों का ठोस बन जाना / both becoming solid
Explanation opens after your attempt
Correct Answer
A. भिन्न अणुओं के बीच विशेष आकर्षण / specific attraction between unlike molecules
Step 1
Concept
ऋणात्मक विचलन में भिन्न अणुओं का आकर्षण अधिक मजबूत होता है। / Negative deviation occurs when unlike molecular attraction is stronger.
Step 2
Why this answer is correct
एसीटोन और क्लोरोफॉर्म में विशेष आकर्षण बनने से अणु कम आसानी से वाष्प बनाते हैं। / In acetone-chloroform, specific attraction reduces escaping tendency.
Step 3
Exam Tip
उदाहरण याद करते समय आकर्षण की प्रकृति भी याद रखें। / Learn examples with the type of interaction involved.
Login to save your score, XP, coins and progress. Login
राउल्ट के नियम से जुड़े ग्राफ में आदर्श द्विघटकीय विलयन के लिए आंशिक दाब और मोल अंश का संबंध कैसा होता है?
In a Raoult's law graph for an ideal binary solution, what is the relation between partial pressure and mole fraction?
#raoults law
#graph
#partial pressure
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A रैखिक / linear
B वृत्तीय / circular
C पूर्णतः असंबंधित / completely unrelated
D हमेशा स्थिर / always constant
Explanation opens after your attempt
Correct Answer
A. रैखिक / linear
Step 1
Concept
राउल्ट के नियम में आंशिक दाब मोल अंश के सीधे समानुपाती होता है। / In Raoult's law, partial pressure is directly proportional to mole fraction.
Step 2
Why this answer is correct
सीधे समानुपात का ग्राफ सीधी रेखा देता है। / Direct proportionality gives a straight-line graph.
Step 3
Exam Tip
आदर्श विलयन में दाब-संरचना ग्राफ को रैखिक पहचानें। / Identify pressure-composition graph of ideal solution as linear.
Login to save your score, XP, coins and progress. Login
यदि विलायक का मोल अंश 0.60 है, तो अवाष्पशील विलेय का मोल अंश कितना होगा?
If the mole fraction of solvent is 0.60, what is the mole fraction of non-volatile solute?
#mole fraction
#binary solution
#non volatile solute
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 0.40
B 0.60
C 1.60
D 0.20
Explanation opens after your attempt
Step 1
Concept
द्विघटकीय विलयन में दोनों मोल अंशों का योग 1 होता है। / In a binary solution, the sum of mole fractions is 1.
Step 2
Why this answer is correct
विलेय का मोल अंश (1 - 0.60 = 0.40) है। / Solute mole fraction is (1 - 0.60 = 0.40).
Step 3
Exam Tip
मोल अंश से जुड़े प्रश्नों में पहले योग को 1 मानें। / For mole fraction questions, use the total as 1.
Login to save your score, XP, coins and progress. Login
किसी विलयन में विलायक का मोल अंश 0.60 है और शुद्ध विलायक का वाष्प दाब 120 किलोपास्कल है। अवाष्पशील विलेय मानकर विलयन का वाष्प दाब कितना होगा?
A solution has solvent mole fraction 0.60 and pure solvent vapour pressure 120 kPa. Assuming non-volatile solute, what is the solution vapour pressure?
#raoults law
#solution vapour pressure
#numerical
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 72 किलोपास्कल / 72 kPa
B 48 किलोपास्कल / 48 kPa
C 120 किलोपास्कल / 120 kPa
D 60 किलोपास्कल / 60 kPa
Explanation opens after your attempt
Correct Answer
A. 72 किलोपास्कल / 72 kPa
Step 1
Concept
अवाष्पशील विलेय होने पर विलयन का वाष्प दाब केवल विलायक से मिलता है। / With a non-volatile solute, solution vapour pressure comes only from solvent.
Step 2
Why this answer is correct
\(120 \times 0.60 = 72\) किलोपास्कल। / \(120 \times 0.60 = 72\) kPa.
Step 3
Exam Tip
विलायक के मोल अंश को गुणन में लगाएँ, विलेय के मोल अंश को नहीं। / Multiply by solvent mole fraction, not solute mole fraction.
Login to save your score, XP, coins and progress. Login
वाष्प दाब में सापेक्ष कमी को अणुसंख्य गुण कहने का मुख्य आधार क्या है?
What is the main basis for calling relative lowering of vapour pressure a colligative property?
#colligative property
#relative lowering
#solute particles
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A यह विलेय कणों की संख्या पर निर्भर करती है / it depends on number of solute particles
B यह विलेय के रंग पर निर्भर करती है / it depends on colour of solute
C यह पात्र के आकार पर ही निर्भर करती है / it depends only on vessel shape
D यह द्रव की गंध पर निर्भर करती है / it depends on smell of liquid
Explanation opens after your attempt
Correct Answer
A. यह विलेय कणों की संख्या पर निर्भर करती है / it depends on number of solute particles
Step 1
Concept
अणुसंख्य गुण विलेय कणों की संख्या से तय होते हैं। / Colligative properties depend on the number of solute particles.
Step 2
Why this answer is correct
वाष्प दाब में सापेक्ष कमी विलेय के मोल अंश से जुड़ी है। / Relative lowering of vapour pressure is linked to solute mole fraction.
Step 3
Exam Tip
विलेय की पहचान से अधिक कण संख्या पर ध्यान दें। / Focus on particle number more than solute identity.
Login to save your score, XP, coins and progress. Login
विद्युत अपघट्य विलेय के कारण वाष्प दाब में कमी सामान्य अनुमान से अधिक क्यों हो सकती है?
Why can lowering of vapour pressure due to an electrolyte be greater than the simple expected value?
#electrolyte
#dissociation
#colligative effect
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A क्योंकि विलेय आयनों में टूटकर कण संख्या बढ़ाता है / because solute dissociates into ions and increases particle number
B क्योंकि विलायक का द्रव्यमान शून्य हो जाता है / because solvent mass becomes zero
C क्योंकि आयन अवश्य वाष्प बनते हैं / because ions necessarily vaporise
D क्योंकि बाह्य दाब समाप्त हो जाता है / because external pressure vanishes
Explanation opens after your attempt
Correct Answer
A. क्योंकि विलेय आयनों में टूटकर कण संख्या बढ़ाता है / because solute dissociates into ions and increases particle number
Step 1
Concept
विद्युत अपघट्य विलयन में आयनों में टूट सकता है। / An electrolyte can dissociate into ions in solution.
Step 2
Why this answer is correct
कणों की संख्या बढ़ने पर अणुसंख्य प्रभाव बढ़ता है। / More particles increase colligative effect.
Step 3
Exam Tip
ऐसे प्रश्नों में लिखी गई मात्रा नहीं, बनने वाले कणों की संख्या देखें। / In such questions, count actual particles formed.
Login to save your score, XP, coins and progress. Login
यदि विलेय कण आपस में संयोजित हो जाएँ, तो वाष्प दाब में कमी पर क्या प्रभाव पड़ेगा?
If solute particles associate with each other, what happens to lowering of vapour pressure?
#association
#lowering vapour pressure
#colligative property
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A कमी अपेक्षा से कम हो सकती है / lowering may be less than expected
B कमी हमेशा अनंत हो जाती है / lowering always becomes infinite
C कमी का ताप से कोई संबंध नहीं रहता / lowering has no relation with temperature
D वाष्प दाब हमेशा शून्य हो जाता है / vapour pressure always becomes zero
Explanation opens after your attempt
Correct Answer
A. कमी अपेक्षा से कम हो सकती है / lowering may be less than expected
Step 1
Concept
संयोजन में कई विलेय कण मिलकर कम कण बनाते हैं। / In association, several solute particles combine to form fewer particles.
Step 2
Why this answer is correct
वास्तविक कण संख्या घटने से अणुसंख्य प्रभाव कम होता है। / Lower actual particle number reduces colligative effect.
Step 3
Exam Tip
संयोजन और वियोजन को कण संख्या के आधार पर समझें। / Understand association and dissociation through particle count.
Login to save your score, XP, coins and progress. Login
एक विलयन का वाष्प दाब शुद्ध विलायक से 8 प्रतिशत कम है। अवाष्पशील विलेय मानकर विलेय का मोल अंश क्या होगा?
A solution has vapour pressure 8 percent lower than the pure solvent. Assuming non-volatile solute, what is the mole fraction of solute?
#percentage lowering
#mole fraction
#numerical
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 0.08
B 0.92
C 8
D 1.08
Explanation opens after your attempt
Step 1
Concept
8 प्रतिशत कमी को दशमलव में बदलें, यह 0.08 है। / Convert 8 percent lowering to decimal, which is 0.08.
Step 2
Why this answer is correct
अवाष्पशील विलेय के लिए सापेक्ष कमी विलेय के मोल अंश के बराबर है। / For a non-volatile solute, relative lowering equals solute mole fraction.
Step 3
Exam Tip
प्रतिशत को सीधे संख्या की तरह न लिखें, उसे दशमलव में बदलें। / Convert percent into decimal before using it.
Login to save your score, XP, coins and progress. Login
यदि बाह्य दाब कम कर दिया जाए तो द्रव का क्वथनांक क्यों घटता है?
Why does the boiling point of a liquid decrease when external pressure is reduced?
#boiling point
#external pressure
#vapour pressure
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A क्योंकि द्रव कम ताप पर ही बाह्य दाब के बराबर वाष्प दाब प्राप्त कर लेता है / because liquid attains vapour pressure equal to external pressure at lower temperature
B क्योंकि अणु अपना द्रव्यमान खो देते हैं / because molecules lose their mass
C क्योंकि वाष्प दाब हमेशा शून्य हो जाता है / because vapour pressure always becomes zero
D क्योंकि द्रव ठोस में बदल जाता है / because liquid changes into solid
Explanation opens after your attempt
Correct Answer
A. क्योंकि द्रव कम ताप पर ही बाह्य दाब के बराबर वाष्प दाब प्राप्त कर लेता है / because liquid attains vapour pressure equal to external pressure at lower temperature
Step 1
Concept
उबलना तब होता है जब वाष्प दाब बाह्य दाब के बराबर होता है। / Boiling occurs when vapour pressure equals external pressure.
Step 2
Why this answer is correct
बाह्य दाब कम होने पर यह बराबरी कम ताप पर हो जाती है। / If external pressure is lower, this equality occurs at lower temperature.
Step 3
Exam Tip
ऊँचाई और दाब के प्रश्न इसी सिद्धांत से हल करें। / Use this idea for altitude and pressure questions.
Login to save your score, XP, coins and progress. Login
अवाष्पशील विलेय मिलाने से विलयन का क्वथनांक क्यों बढ़ता है?
Why does adding a non-volatile solute increase the boiling point of a solution?
#boiling point elevation
#non volatile solute
#vapour pressure
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A क्योंकि वाष्प दाब घटता है और बाह्य दाब तक पहुँचने के लिए अधिक ताप चाहिए / because vapour pressure decreases and higher temperature is needed to reach external pressure
B क्योंकि विलेय वाष्प में बदलकर दाब बढ़ा देता है / because solute vaporises and increases pressure
C क्योंकि विलायक का मोलर द्रव्यमान बदल जाता है / because molar mass of solvent changes
D क्योंकि द्रव का रंग बदल जाता है / because liquid colour changes
Explanation opens after your attempt
Correct Answer
A. क्योंकि वाष्प दाब घटता है और बाह्य दाब तक पहुँचने के लिए अधिक ताप चाहिए / because vapour pressure decreases and higher temperature is needed to reach external pressure
Step 1
Concept
अवाष्पशील विलेय विलायक का वाष्प दाब घटाता है। / A non-volatile solute lowers solvent vapour pressure.
Step 2
Why this answer is correct
उबलने के लिए वाष्प दाब को बाह्य दाब के बराबर होना चाहिए। / For boiling, vapour pressure must equal external pressure.
Step 3
Exam Tip
इसलिए अधिक ताप की जरूरत पड़ती है और क्वथनांक बढ़ता है। / Therefore higher temperature is required and boiling point increases.
Login to save your score, XP, coins and progress. Login
खुले पात्र में द्रव का वाष्प दाब सीधे मापना कठिन क्यों है?
Why is it difficult to directly measure vapour pressure of a liquid in an open vessel?
#closed vessel
#measurement
#equilibrium
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A क्योंकि वाष्प बाहर निकलते रहते हैं और संतुलन नहीं बन पाता / because vapour escapes and equilibrium cannot establish
B क्योंकि द्रव का रंग गायब हो जाता है / because colour of liquid disappears
C क्योंकि द्रव में विलेय अनिवार्य है / because solute is compulsory in liquid
D क्योंकि तापमान मापना असंभव है / because temperature measurement is impossible
Explanation opens after your attempt
Correct Answer
A. क्योंकि वाष्प बाहर निकलते रहते हैं और संतुलन नहीं बन पाता / because vapour escapes and equilibrium cannot establish
Step 1
Concept
वाष्प दाब संतुलन अवस्था से संबंधित है। / Vapour pressure is related to equilibrium state.
Step 2
Why this answer is correct
खुले पात्र में वाष्प बाहर निकलते रहते हैं, इसलिए स्थायी संतुलन नहीं बनता। / In an open vessel, vapour keeps escaping, so stable equilibrium is not established.
Step 3
Exam Tip
वाष्प दाब के लिए बंद व्यवस्था का विचार जरूरी है। / A closed system is needed for vapour pressure measurement.
Login to save your score, XP, coins and progress. Login
किसी आदर्श विलयन में घटक क का शुद्ध वाष्प दाब घटक ख से अधिक है। द्रव में दोनों के मोल अंश बराबर हैं। वाष्प में किसका अनुपात अधिक होगा?
In an ideal solution, pure vapour pressure of component A is greater than that of component B. Their mole fractions in liquid are equal. Which component will have higher proportion in vapour?
#vapour phase
#volatile component
#partial pressure
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A घटक क / component A
B घटक ख / component B
C दोनों हमेशा बराबर / both always equal
D कोई भी वाष्प में नहीं जाएगा / none will enter vapour
Explanation opens after your attempt
Correct Answer
A. घटक क / component A
Step 1
Concept
समान द्रव मोल अंश होने पर भी अधिक शुद्ध वाष्प दाब वाला घटक अधिक आंशिक दाब देता है। / Even at equal liquid mole fractions, the component with higher pure vapour pressure gives higher partial pressure.
Step 2
Why this answer is correct
घटक क अधिक वाष्पशील है, इसलिए वाष्प में उसका अनुपात अधिक होगा। / A is more volatile, so it is richer in vapour.
Step 3
Exam Tip
वाष्प संरचना में शुद्ध वाष्प दाब का प्रभाव देखें। / Consider pure vapour pressure while comparing vapour composition.
Login to save your score, XP, coins and progress. Login
राउल्ट के नियम से सापेक्ष कमी और विलेय के मोल अंश का संबंध किस प्रकार प्राप्त होता है?
From Raoult's law, what relation is obtained between relative lowering of vapour pressure and solute mole fraction?
#raoults law
#relative lowering
#solute mole fraction
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A दोनों बराबर होते हैं / both are equal
B सापेक्ष कमी हमेशा दोगुनी होती है / relative lowering is always double
C मोल अंश हमेशा शून्य होता है / mole fraction is always zero
D दोनों का कोई संबंध नहीं / there is no relation
Explanation opens after your attempt
Correct Answer
A. दोनों बराबर होते हैं / both are equal
Step 1
Concept
अवाष्पशील विलेय के लिए विलायक का दाब उसके मोल अंश के अनुपात में घटता है। / For a non-volatile solute, solvent pressure decreases according to solvent mole fraction.
Step 2
Why this answer is correct
गणितीय रूप से सापेक्ष कमी विलेय के मोल अंश के बराबर आती है। / Mathematically, relative lowering becomes equal to solute mole fraction.
Step 3
Exam Tip
यह परिणाम अणुसंख्य गुणों में बहुत उपयोगी है। / This result is very useful in colligative property problems.
Login to save your score, XP, coins and progress. Login
किसी द्रव का वाष्प दाब बहुत कम है। उसके सामान्य क्वथनांक के बारे में कौन सा अनुमान बेहतर है?
A liquid has very low vapour pressure. Which estimate about its normal boiling point is more reasonable?
#low vapour pressure
#boiling point
#intermolecular force
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A उसका सामान्य क्वथनांक अधिक हो सकता है / its normal boiling point may be high
B उसका सामान्य क्वथनांक हमेशा शून्य होगा / its normal boiling point will always be zero
C वह कभी द्रव नहीं हो सकता / it can never be a liquid
D उसका क्वथनांक वाष्प दाब से असंबंधित है / its boiling point is unrelated to vapour pressure
Explanation opens after your attempt
Correct Answer
A. उसका सामान्य क्वथनांक अधिक हो सकता है / its normal boiling point may be high
Step 1
Concept
कम वाष्प दाब बताता है कि अणु आसानी से वाष्प में नहीं जाते। / Low vapour pressure means molecules do not escape easily.
Step 2
Why this answer is correct
बाह्य दाब के बराबर दाब बनाने के लिए अधिक ताप चाहिए। / Higher temperature is needed to reach external pressure.
Step 3
Exam Tip
कम वाष्प दाब को अधिक क्वथनांक से जोड़ें। / Connect low vapour pressure with higher boiling point.
Login to save your score, XP, coins and progress. Login
यदि दो समान विलयनों में केवल तापमान अलग है, तो अधिक ताप वाले विलयन का वाष्प दाब कैसा होगा?
If two identical solutions differ only in temperature, how will the vapour pressure of the solution at higher temperature compare?
#temperature effect
#solution vapour pressure
#kinetic energy
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A अधिक होगा / it will be higher
B कम होगा / it will be lower
C शून्य होगा / it will be zero
D बिल्कुल समान रहेगा / it will remain exactly same
Explanation opens after your attempt
Correct Answer
A. अधिक होगा / it will be higher
Step 1
Concept
ताप बढ़ने से अणुओं की गतिज ऊर्जा बढ़ती है। / Higher temperature increases molecular kinetic energy.
Step 2
Why this answer is correct
अधिक अणु वाष्प में जाते हैं, इसलिए वाष्प दाब बढ़ता है। / More molecules enter vapour phase, so vapour pressure increases.
Step 3
Exam Tip
समान संरचना होने पर तापमान का प्रभाव स्पष्ट रूप से देखें। / When composition is same, focus on temperature effect.
Login to save your score, XP, coins and progress. Login
वाष्प दाब की इकाई के रूप में कौन सा विकल्प सही है?
Which option is correct as a unit of vapour pressure?
#unit
#kilopascal
#vapour pressure
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A किलोपास्कल / kilopascal
B मोल अंश / mole fraction
C मोल प्रति किलोग्राम / mole per kilogram
D ग्राम प्रति मोल / gram per mole
Explanation opens after your attempt
Correct Answer
A. किलोपास्कल / kilopascal
Step 1
Concept
वाष्प दाब एक दाब है। / Vapour pressure is a pressure.
Step 2
Why this answer is correct
दाब को पास्कल या किलोपास्कल में व्यक्त किया जा सकता है। / Pressure can be expressed in pascal or kilopascal.
Step 3
Exam Tip
मोल अंश मात्रक रहित होता है, उसे दाब की इकाई न मानें। / Mole fraction is unitless, so it is not a pressure unit.
Login to save your score, XP, coins and progress. Login
यदि किसी द्रव का वाष्प दाब बाह्य दाब से कम है, तो उस ताप पर द्रव के उबलने के बारे में क्या कहा जा सकता है?
If the vapour pressure of a liquid is less than external pressure, what can be said about boiling at that temperature?
#boiling condition
#external pressure
#vapour pressure
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A द्रव सामान्य रूप से नहीं उबलेगा / the liquid will not boil normally
B द्रव निश्चित रूप से उबल जाएगा / the liquid will definitely boil
C द्रव गैस नहीं बना सकता / the liquid cannot form vapour
D द्रव का ताप अनिवार्य रूप से शून्य है / the temperature of liquid is necessarily zero
Explanation opens after your attempt
Correct Answer
A. द्रव सामान्य रूप से नहीं उबलेगा / the liquid will not boil normally
Step 1
Concept
उबलना तभी होता है जब वाष्प दाब बाह्य दाब के बराबर हो। / Boiling occurs when vapour pressure equals external pressure.
Step 2
Why this answer is correct
यदि वाष्प दाब कम है, तो अभी उबलने की शर्त पूरी नहीं हुई। / If vapour pressure is lower, boiling condition is not yet met.
Step 3
Exam Tip
उबलने की शर्त को सीधे दाब की बराबरी से पहचानें। / Identify boiling through pressure equality.
Login to save your score, XP, coins and progress. Login
वाष्प दाब और वाष्पीकरण की दर में सबसे महत्वपूर्ण अंतर क्या है?
What is the most important difference between vapour pressure and rate of evaporation?
#vapour pressure
#evaporation rate
#equilibrium
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A वाष्प दाब संतुलन गुण है, दर बाहरी परिस्थितियों से भी प्रभावित होती है / vapour pressure is an equilibrium property, rate is also affected by external conditions
B दोनों पूर्णतः समान हैं / both are exactly same
C वाष्प दाब केवल रंग है / vapour pressure is only colour
D दर केवल मोल अंश है / rate is only mole fraction
Explanation opens after your attempt
Correct Answer
A. वाष्प दाब संतुलन गुण है, दर बाहरी परिस्थितियों से भी प्रभावित होती है / vapour pressure is an equilibrium property, rate is also affected by external conditions
Step 1
Concept
वाष्प दाब बंद व्यवस्था में संतुलन से संबंधित है। / Vapour pressure is related to equilibrium in a closed system.
Step 2
Why this answer is correct
वाष्पीकरण की दर सतह क्षेत्र, वायु और ताप से प्रभावित हो सकती है। / Rate of evaporation can depend on surface area, air movement and temperature.
Step 3
Exam Tip
परीक्षा में दाब और दर को एक जैसा न मानें। / Do not treat pressure and rate as identical in exams.
Login to save your score, XP, coins and progress. Login
किस स्थिति में किसी द्रव का संतुलन वाष्प दाब सही रूप से परिभाषित होगा?
In which situation will the equilibrium vapour pressure of a liquid be properly defined?
#equilibrium vapour pressure
#closed vessel
#definition
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A जब बंद पात्र में द्रव और वाष्प संतुलन में हों / when liquid and vapour are in equilibrium in a closed vessel
B जब द्रव खुले मैदान में रखा हो / when liquid is kept in open air
C जब सभी वाष्प बाहर निकल जाएँ / when all vapour escapes
D जब पात्र में केवल ठोस हो / when only solid is present in the vessel
Explanation opens after your attempt
Correct Answer
A. जब बंद पात्र में द्रव और वाष्प संतुलन में हों / when liquid and vapour are in equilibrium in a closed vessel
Step 1
Concept
संतुलन वाष्प दाब के लिए वाष्पन और संघनन दोनों होने चाहिए। / Equilibrium vapour pressure requires both vaporisation and condensation.
Step 2
Why this answer is correct
बंद पात्र में यह संतुलन बन सकता है। / This equilibrium can be established in a closed vessel.
Step 3
Exam Tip
परिभाषा में बंद पात्र और संतुलन दोनों शब्द जरूरी हैं। / The terms closed vessel and equilibrium are both important.
Login to save your score, XP, coins and progress. Login
यदि घटक क का द्रव मोल अंश 0.30 और शुद्ध वाष्प दाब 200 किलोपास्कल है, तो आदर्श विलयन में उसका आंशिक दाब कितना होगा?
If liquid mole fraction of component A is 0.30 and its pure vapour pressure is 200 kPa, what is its partial pressure in an ideal solution?
#partial pressure
#raoults law
#numerical
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 60 किलोपास्कल / 60 kPa
B 30 किलोपास्कल / 30 kPa
C 170 किलोपास्कल / 170 kPa
D 200 किलोपास्कल / 200 kPa
Explanation opens after your attempt
Correct Answer
A. 60 किलोपास्कल / 60 kPa
Step 1
Concept
आंशिक दाब शुद्ध वाष्प दाब और द्रव मोल अंश के गुणन से मिलता है। / Partial pressure equals pure vapour pressure multiplied by liquid mole fraction.
Step 2
Why this answer is correct
\(0.30 \times 200 = 60\) किलोपास्कल। / \(0.30 \times 200 = 60\) kPa.
Step 3
Exam Tip
राउल्ट के नियम में द्रव अवस्था का मोल अंश प्रयोग करें। / Use liquid phase mole fraction in Raoult's law.
Login to save your score, XP, coins and progress. Login
यदि आदर्श विलयन में घटक क और ख के आंशिक दाब क्रमशः 45 और 15 किलोपास्कल हैं, तो वाष्प में घटक ख का मोल अंश कितना होगा?
If partial pressures of components A and B in an ideal solution are 45 kPa and 15 kPa respectively, what is mole fraction of B in vapour phase?
#vapour mole fraction
#partial pressure
#numerical
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 0.25
B 0.15
C 0.75
D 0.60
Explanation opens after your attempt
Step 1
Concept
कुल दाब (45 + 15 = 60) किलोपास्कल है। / Total pressure is (45 + 15 = 60) kPa.
Step 2
Why this answer is correct
वाष्प में घटक ख का मोल अंश (15/60 = 0.25) है। / Vapour phase mole fraction of B is (15/60 = 0.25).
Step 3
Exam Tip
वाष्प मोल अंश निकालते समय उसी घटक का आंशिक दाब ऊपर रखें। / Put the partial pressure of the required component in numerator.
Login to save your score, XP, coins and progress. Login
आदर्श विलयन की पहचान के लिए कौन सा कथन सबसे उपयुक्त है?
Which statement is most suitable for identifying an ideal solution?
#ideal solution
#raoults law
#concentration
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A यह सभी सांद्रताओं पर राउल्ट के नियम का पालन करता है / it obeys Raoult's law at all concentrations
B यह केवल बहुत तनु अवस्था में बनता है / it forms only in very dilute state
C यह हमेशा धनात्मक विचलन दिखाता है / it always shows positive deviation
D यह हमेशा ऋणात्मक विचलन दिखाता है / it always shows negative deviation
Explanation opens after your attempt
Correct Answer
A. यह सभी सांद्रताओं पर राउल्ट के नियम का पालन करता है / it obeys Raoult's law at all concentrations
Step 1
Concept
आदर्श विलयन की सबसे सीधी पहचान राउल्ट के नियम से होती है। / The clearest identification of an ideal solution is Raoult's law.
Step 2
Why this answer is correct
यह नियम सभी सांद्रताओं पर लागू होना चाहिए। / It should obey this law at all concentrations.
Step 3
Exam Tip
केवल तनु अवस्था का पालन आदर्शता की पूरी शर्त नहीं है। / Obeying only in very dilute condition is not the full ideal condition.
Login to save your score, XP, coins and progress. Login
आदर्श विलयन बनने पर मिश्रण की ऊष्मा लगभग शून्य क्यों होती है?
Why is heat of mixing nearly zero when an ideal solution forms?
#heat of mixing
#ideal solution
#molecular attraction
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A क्योंकि समान और भिन्न अणुओं के आकर्षण लगभग बराबर होते हैं / because attractions between like and unlike molecules are nearly equal
B क्योंकि कोई अणु उपस्थित नहीं होता / because no molecules are present
C क्योंकि वाष्प दाब शून्य हो जाता है / because vapour pressure becomes zero
D क्योंकि द्रव ठोस बन जाता है / because liquid becomes solid
Explanation opens after your attempt
Correct Answer
A. क्योंकि समान और भिन्न अणुओं के आकर्षण लगभग बराबर होते हैं / because attractions between like and unlike molecules are nearly equal
Step 1
Concept
आदर्श विलयन में अणुओं के बीच पुराने और नए आकर्षण लगभग समान होते हैं। / In an ideal solution, old and new molecular attractions are nearly similar.
Step 2
Why this answer is correct
इसलिए मिश्रण पर ऊर्जा का बड़ा लेन-देन नहीं होता। / Therefore no large energy exchange occurs on mixing.
Step 3
Exam Tip
आदर्श विलयन के लिए ऊष्मा परिवर्तन और आयतन परिवर्तन दोनों लगभग शून्य याद रखें। / Remember nearly zero heat and volume change for ideal solutions.
Login to save your score, XP, coins and progress. Login
यदि किसी विलयन में विलेय का मोल अंश 0.10 है और शुद्ध विलायक का वाष्प दाब 50 किलोपास्कल है, तो विलयन का वाष्प दाब कितना होगा?
If a solution has solute mole fraction 0.10 and pure solvent vapour pressure 50 kPa, what is the vapour pressure of the solution?
#solute mole fraction
#solution pressure
#numerical
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 45 किलोपास्कल / 45 kPa
B 5 किलोपास्कल / 5 kPa
C 50 किलोपास्कल / 50 kPa
D 55 किलोपास्कल / 55 kPa
Explanation opens after your attempt
Correct Answer
A. 45 किलोपास्कल / 45 kPa
Step 1
Concept
विलेय का मोल अंश 0.10 है, इसलिए विलायक का मोल अंश 0.90 होगा। / Solute mole fraction is 0.10, so solvent mole fraction is 0.90.
Step 2
Why this answer is correct
विलयन का दाब \(50 \times 0.90 = 45\) किलोपास्कल है। / Solution pressure is \(50 \times 0.90 = 45\) kPa.
Step 3
Exam Tip
पहले विलायक का मोल अंश निकालें, फिर राउल्ट का नियम लगाएँ। / First find solvent mole fraction, then apply Raoult's law.
Login to save your score, XP, coins and progress. Login
किसी द्रव में अंतराअणुक आकर्षण मजबूत होने पर वाष्प दाब कैसा होगा?
If intermolecular attraction in a liquid is strong, how will its vapour pressure be?
#intermolecular forces
#low vapour pressure
#concept
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A कम / low
B अधिक / high
C हमेशा शून्य / always zero
D बाह्य दाब से हमेशा अधिक / always greater than external pressure
Explanation opens after your attempt
Step 1
Concept
मजबूत आकर्षण अणुओं को द्रव में अधिक मजबूती से रोके रखता है। / Strong attraction holds molecules more firmly in liquid.
Step 2
Why this answer is correct
कम अणु सतह से निकलकर वाष्प बनते हैं। / Fewer molecules escape from the surface into vapour.
Step 3
Exam Tip
मजबूत आकर्षण को कम वाष्प दाब से याद रखें। / Link strong attraction with low vapour pressure.
Login to save your score, XP, coins and progress. Login
यदि किसी द्रव की सतह का क्षेत्रफल बढ़ा दिया जाए, तो संतुलन वाष्प दाब पर अंतिम प्रभाव क्या होगा?
If the surface area of a liquid is increased, what will be the final effect on equilibrium vapour pressure?
#surface area
#equilibrium vapour pressure
#rate
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A निश्चित ताप पर अपरिवर्तित रहेगा / remains unchanged at constant temperature
B हमेशा दोगुना हो जाएगा / always becomes double
C हमेशा आधा हो जाएगा / always becomes half
D शून्य हो जाएगा / becomes zero
Explanation opens after your attempt
Correct Answer
A. निश्चित ताप पर अपरिवर्तित रहेगा / remains unchanged at constant temperature
Step 1
Concept
सतह क्षेत्र वाष्पीकरण की दर को प्रभावित कर सकता है। / Surface area can affect rate of evaporation.
Step 2
Why this answer is correct
लेकिन संतुलन वाष्प दाब निश्चित ताप पर द्रव की प्रकृति से तय होता है। / But equilibrium vapour pressure at fixed temperature is determined by nature of liquid.
Step 3
Exam Tip
दर और संतुलन दाब को अलग-अलग समझें। / Keep rate and equilibrium pressure separate.
Login to save your score, XP, coins and progress. Login
किसी आदर्श विलयन में कुल वाष्प दाब 100 किलोपास्कल और घटक क का आंशिक दाब 35 किलोपास्कल है। घटक ख का आंशिक दाब कितना होगा?
In an ideal solution, total vapour pressure is 100 kPa and partial pressure of component A is 35 kPa. What is the partial pressure of component B?
#total pressure
#partial pressure
#binary mixture
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A 65 किलोपास्कल / 65 kPa
B 35 किलोपास्कल / 35 kPa
C 100 किलोपास्कल / 100 kPa
D 135 किलोपास्कल / 135 kPa
Explanation opens after your attempt
Correct Answer
A. 65 किलोपास्कल / 65 kPa
Step 1
Concept
कुल दाब आंशिक दाबों का योग होता है। / Total pressure is the sum of partial pressures.
Step 2
Why this answer is correct
घटक ख का दाब (100 - 35 = 65) किलोपास्कल है। / Pressure of component B is (100 - 35 = 65) kPa.
Step 3
Exam Tip
दो घटकों वाले प्रश्न में दूसरे दाब के लिए कुल दाब से पहला दाब घटाएँ। / In two-component problems, subtract one partial pressure from total pressure.
Login to save your score, XP, coins and progress. Login
किस विकल्प में वाष्प दाब से संबंधित सबसे सही परीक्षा-उपयोगी कथन दिया गया है?
Which option gives the most exam-useful correct statement related to vapour pressure?
#vapour pressure
#exam concept
#liquid nature
50 50-50 2 wrong hide
⏭ Skip Next question
+10 Time+ 10 sec extra
? Hint Small clue
A वाष्प दाब निश्चित ताप पर द्रव की प्रकृति पर निर्भर करता है / vapour pressure depends on nature of liquid at fixed temperature
B वाष्प दाब केवल द्रव की मात्रा पर निर्भर करता है / vapour pressure depends only on amount of liquid
C वाष्प दाब हमेशा मोलर द्रव्यमान के बराबर होता है / vapour pressure is always equal to molar mass
D वाष्प दाब का विलयन से कोई संबंध नहीं / vapour pressure has no relation with solution
Explanation opens after your attempt
Correct Answer
A. वाष्प दाब निश्चित ताप पर द्रव की प्रकृति पर निर्भर करता है / vapour pressure depends on nature of liquid at fixed temperature
Step 1
Concept
संतुलन वाष्प दाब एक निश्चित ताप पर द्रव की प्रकृति से जुड़ा होता है। / Equilibrium vapour pressure at a fixed temperature is linked with the nature of liquid.
Step 2
Why this answer is correct
द्रव की मात्रा या पात्र का आकार मुख्य निर्धारक नहीं होते, जब संतुलन बना हो। / Amount of liquid or vessel size is not the main factor once equilibrium is established.
Step 3
Exam Tip
वाष्प दाब में तापमान और प्रकृति को सबसे पहले पहचानें। / First identify temperature and nature of liquid in vapour pressure questions.
Login to save your score, XP, coins and progress. Login