Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects
Concept-wise Practice

boiling-point-elevation MCQ Questions for Class 12

boiling-point-elevation se related questions ko ek jagah revise karein. Har question me bilingual content, answer feedback aur explanation available hai.

Practice Questions

169 questions tagged with boiling-point-elevation.

यदि किसी विलयन में विलेय का (i=0.9) है, तो समान मोललता वाले सामान्य विलेय की तुलना में क्वथनांक वृद्धि कैसी होगी?

If a solute has (i=0.9), how will its boiling point elevation compare with a normal solute of the same molality?

Explanation opens after your attempt
Correct Answer

A. (0.9) गुना(0.9) times

Step 1

Concept

क्वथनांक वृद्धि (i) के समानुपाती होती है। / Boiling point elevation is proportional to (i).

Step 2

Why this answer is correct

सामान्य विलेय के लिए (i=1) होता है। / A normal solute has (i=1).

Step 3

Exam Tip

अतः (i=0.9) पर वृद्धि सामान्य की (0.9) गुना होगी। / Therefore, when (i=0.9), the elevation is (0.9) times the normal value.

Open Question Page
Ask Friends

यदि (i=0.8) और पदार्थ केवल द्विगुणन करता है, तो समान मोललता पर उसका क्वथनांक वृद्धि सामान्य विलेय की तुलना में कैसी होगी?

If (i=0.8) and the substance undergoes only dimerisation, how will its boiling point elevation compare with a normal solute at the same molality?

Explanation opens after your attempt
Correct Answer

A. (0.8) गुना(0.8) times

Step 1

Concept

क्वथनांक वृद्धि (i) के समानुपाती है। / Boiling point elevation is proportional to (i).

Step 2

Why this answer is correct

सामान्य विलेय के लिए (i=1), जबकि यहाँ (i=0.8) है। / A normal solute has (i=1), while here (i=0.8).

Step 3

Exam Tip

इसलिए वृद्धि सामान्य की (0.8) गुना होगी। / Therefore, the elevation is (0.8) times the normal value.

Open Question Page
Ask Friends

एक अज्ञात विलेय के लिए उबलांक वृद्धि अपेक्षित मान का (1.5) गुना है। यदि वह (AB) प्रकार का विद्युत अपघट्य है, तो वियोजन की मात्रा क्या है?

For an unknown solute, the boiling point elevation is (1.5) times the expected value. If it is an (AB)-type electrolyte, what is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

सहगुणधर्मी प्रभाव का गुणक (i) होता है, इसलिए (i=1.5)। / The multiplier of a colligative property is (i), so (i=1.5).

Step 2

Why this answer is correct

(AB) के लिए \(i=1+\alpha\)। / For (AB), \(i=1+\alpha\).

Step 3

Exam Tip

\(\alpha=0.5\), यानी (50%) वियोजन। / \(\alpha=0.5\), or (50%) dissociation.

Open Question Page
Ask Friends

\(यदि (K_b) विधि से मोलर द्रव्यमान (40\),g mol\(^{-1}) आता है जबकि वास्तविक (58.5\),g mol\(^{-1}) है, तो सबसे उचित कारण क्या है\)?

\(If the (K_b) method gives molar mass (40\),g mol\(^{-1}) while the true value is (58.5\),g mol\(^{-1}), what is the most suitable reason\)?

Explanation opens after your attempt
Correct Answer

A. वियोजनDissociation

Step 1

Concept

मापा मोलर द्रव्यमान वास्तविक से कम है। / The observed molar mass is lower than the true value.

Step 2

Why this answer is correct

कम मोलर द्रव्यमान का अर्थ है कि सहगुणधर्मी प्रभाव अपेक्षा से अधिक है। / This means the colligative effect is larger than expected.

Step 3

Exam Tip

ऐसा सामान्यतः वियोजन के कारण होता है। / Such behaviour is generally due to dissociation.

Open Question Page
Ask Friends

एक विलेय का उबलांक वृद्धि प्रयोग में मापा गया द्रव्यमान वास्तविक से तीन गुना है। यह किस प्रकार के कण परिवर्तन के अधिक निकट है?

In a boiling point elevation experiment, the observed molar mass of a solute is three times its true molar mass. Which particle change is it closest to?

Explanation opens after your attempt
Correct Answer

A. त्रिगुणनTrimerisation

Step 1

Concept

\((M_{\)obs\(}=3M_{\)true}) से \(i=\frac{1}{3}\) मिलता है। \(/ (M_{\)obs\(}=3M_{\)true\(}) gives (i=\frac{1}{3}).\)

Step 2

Why this answer is correct

\(i=\frac{1}{3}\) का सीमांत मान तीन कणों के मिलकर एक बनने से जुड़ा है। / This limiting value matches three particles associating into one.

Step 3

Exam Tip

मोलर द्रव्यमान कई गुना अधिक हो तो सहसंयोजन की संख्या सोचें। / If observed molar mass is many times higher, identify the association number.

Open Question Page
Ask Friends

किसी (0.40,m\() विलयन में (K_b=0.50\),K kg mol\(^{-1}) और देखा गया उबालांक उन्नयन (0.30\),K) है। यदि विलेय दो आयनों में वियोजित होता है तो वियोजन की मात्रा क्या होगी?

In a (0.40,m\() solution, (K_b=0.50\),K kg mol\(^{-1}) and observed boiling point elevation is (0.30\),K). If the solute dissociates into two ions, what is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

\(सामान्य उन्नयन (K_bm=0.50\times0.40=0.20\),K)। \(/ Normal elevation is (K_bm=0.50\times0.40=0.20\),K).

Step 2

Why this answer is correct

\(i=\frac{0.30}{0.20}=1.50\)। दो आयनों के लिए \(i=1+\alpha\), इसलिए \(\alpha=0.50\)। / \(i=\frac{0.30}{0.20}=1.50\). For two ions \(i=1+\alpha\), so \(\alpha=0.50\).

Step 3

Exam Tip

अणुसंख्यक गुण का अनुपात (i) देता है। / The ratio of colligative property gives (i).

Open Question Page
Ask Friends

एक विलेय का सामान्य उबालांक उन्नयन (0.32,K) है। (50%) त्रिमेर संघटन होने पर देखा गया उन्नयन कितना होगा?

A solute has normal boiling point elevation (0.32,K). What will be the observed elevation if (50%) trimer association occurs?

Explanation opens after your attempt
Correct Answer

C. (0.213,K)

Step 1

Concept

त्रिमेर संघटन में \(i=1-\alpha+\frac{\alpha}{3}\)। / For trimer association \(i=1-\alpha+\frac{\alpha}{3}\).

Step 2

Why this answer is correct

\(i=1-0.50+\frac{0.50}{3}=0.667\)। \(देखा गया उन्नयन (0.667\times0.32\approx0.213\),K)। \(/ (i=1-0.50+\frac{0.50}{3}=0.667). Observed elevation (=0.667\times0.32\approx0.213\),K).

Step 3

Exam Tip

संघटन होने पर अणुसंख्यक गुण सामान्य से कम होता है। / Association makes the colligative property lower than normal.

Open Question Page
Ask Friends

किसी विलयन में उबालांक उन्नयन अपेक्षित मान से (40%) कम है। प्रत्यक्ष मोलर द्रव्यमान असली द्रव्यमान का कितना होगा?

In a solution, elevation in boiling point is (40%) lower than expected. What will be the apparent molar mass compared with the true mass?

Explanation opens after your attempt
Correct Answer

C. (1.67M)

Step 1

Concept

(40%) कम होने का अर्थ है (i=0.60)। / (40%) lower means (i=0.60).

Step 2

Why this answer is correct

\((M_{\)app}=\frac{M}{i}=\frac{M}{0.60}=1.67M)। \(/ (M_{\)app\(}=\frac{M}{i}=\frac{M}{0.60}=1.67M).\)

Step 3

Exam Tip

अणुसंख्यक गुण घटे तो प्रत्यक्ष द्रव्यमान बढ़ता है। / When the colligative property decreases, apparent mass increases.

Open Question Page
Ask Friends

\(यदि (K_b=0.60\),K kg mol\(^{-1}), (m=0.20\),mol kg\(^{-1}) और देखा गया उबालांक उन्नयन (0.18\),K) है तो (i) क्या होगा?

\(If (K_b=0.60\),K kg mol\(^{-1}), (m=0.20\),mol kg\(^{-1}), and observed boiling point elevation is (0.18\),K), what will be (i)?

Explanation opens after your attempt
Correct Answer

C. (1.50)

Step 1

Concept

\(सामान्य उन्नयन (K_bm=0.60\times0.20=0.12\),K) होगा। \(/ Normal elevation is (K_bm=0.60\times0.20=0.12\),K).

Step 2

Why this answer is correct

\(i=\frac{0.18}{0.12}=1.50\)। / \(i=\frac{0.18}{0.12}=1.50\).

Step 3

Exam Tip

देखा गया मान सामान्य से अधिक हो तो वियोजन की संभावना होती है। / If observed value is higher than normal, dissociation is likely.

Open Question Page
Ask Friends

किसी (0.30,m\() विलयन में (K_b=0.50\),K kg mol\(^{-1}) और देखा गया उबालांक उन्नयन (0.225\),K) है। यदि विलेय दो आयनों में वियोजित होता है तो वियोजन की मात्रा क्या होगी?

In a (0.30,m\() solution, (K_b=0.50\),K kg mol\(^{-1}) and observed boiling point elevation is (0.225\),K). If the solute dissociates into two ions, what is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

\(सामान्य उन्नयन (K_bm=0.50\times0.30=0.150\),K)। \(/ Normal elevation is (K_bm=0.50\times0.30=0.150\),K).

Step 2

Why this answer is correct

\(i=\frac{0.225}{0.150}=1.50\)। दो आयनों के लिए \(i=1+\alpha\) इसलिए \(\alpha=0.50\)। / \(i=\frac{0.225}{0.150}=1.50\). For two ions \(i=1+\alpha\), so \(\alpha=0.50\).

Step 3

Exam Tip

डेटा अधिक हो तो भी हल का क्रम वही रहता है। / Even with more data, the solving order remains the same.

Open Question Page
Ask Friends

एक विलेय का सामान्य उबालांक उन्नयन (0.24,K) है। (60%) द्विमेर संघटन होने पर देखा गया उन्नयन कितना होगा?

A solute has normal boiling point elevation (0.24,K). What will be the observed elevation if (60%) dimer association occurs?

Explanation opens after your attempt
Correct Answer

C. (0.168,K)

Step 1

Concept

द्विमेर संघटन में \(i=1-\frac{0.60}{2}=0.70\)। / For dimer association \(i=1-\frac{0.60}{2}=0.70\).

Step 2

Why this answer is correct

देखा गया उन्नयन (i) गुना सामान्य उन्नयन होगा। \((0.70\times0.24=0.168\),K)। \(/ Observed elevation is (i) times the normal elevation. (0.70\times0.24=0.168\),K).

Step 3

Exam Tip

संघटन के बाद अणुसंख्यक गुण घटता है। / Association decreases colligative properties.

Open Question Page
Ask Friends

किसी विलयन में उबालांक उन्नयन अपेक्षित मान से (25%) कम है। यदि कारण द्विमेर संघटन है तो प्रत्यक्ष मोलर द्रव्यमान असली द्रव्यमान का कितना होगा?

In a solution, elevation in boiling point is (25%) lower than expected. If the reason is dimer association, what will be the apparent molar mass compared with the true mass?

Explanation opens after your attempt
Correct Answer

C. (1.33M)

Step 1

Concept

(25%) कम गुण का अर्थ है (i=0.75)। / A (25%) lower property means (i=0.75).

Step 2

Why this answer is correct

\((M_{\)app}=\frac{M}{i}=\frac{M}{0.75}=1.33M)। \(/ (M_{\)app\(}=\frac{M}{i}=\frac{M}{0.75}=1.33M).\)

Step 3

Exam Tip

अणुसंख्यक गुण घटे तो प्रत्यक्ष मोलर द्रव्यमान बढ़ता है। / When the colligative property decreases, apparent molar mass increases.

Open Question Page
Ask Friends

\(यदि (K_b=0.80\),K kg mol\(^{-1}), (m=0.25\),mol kg\(^{-1}) और (\Delta T_b=0.10\),K) है तो (i) क्या है और यह क्या बताता है?

\(If (K_b=0.80\),K kg mol\(^{-1}), (m=0.25\),mol kg\(^{-1}), and (\Delta T_b=0.10\),K), what is (i) and what does it indicate?

Explanation opens after your attempt
Correct Answer

A. (i=0.5), संघटन(i=0.5), association

Step 1

Concept

\(सामान्य उन्नयन (K_bm=0.80\times0.25=0.20\),K) होगा। \(/ Normal elevation is (K_bm=0.80\times0.25=0.20\),K).

Step 2

Why this answer is correct

\(i=\frac{0.10}{0.20}=0.5\)। / \(i=\frac{0.10}{0.20}=0.5\).

Step 3

Exam Tip

(i<1) होने से प्रभावी कण कम हैं इसलिए संघटन का संकेत मिलता है। / Since (i<1), effective particles are fewer, indicating association.

Open Question Page
Ask Friends

\(यदि (K_b=0.52\),K kg mol\(^{-1}), (m=0.50\),mol kg\(^{-1}) और देखा गया उबालांक उन्नयन (0.39\),K) है तो (i) का मान क्या होगा?

\(If (K_b=0.52\),K kg mol\(^{-1}), (m=0.50\),mol kg\(^{-1}), and the observed boiling point elevation is (0.39\),K), what is the value of (i)?

Explanation opens after your attempt
Correct Answer

C. (1.50)

Step 1

Concept

\(सामान्य उन्नयन (\Delta T_b=K_bm=0.52\times0.50=0.26\),K) है। \(/ Normal elevation is (\Delta T_b=K_bm=0.52\times0.50=0.26\),K).

Step 2

Why this answer is correct

\(i=\frac{0.39}{0.26}=1.50\)। / \(i=\frac{0.39}{0.26}=1.50\).

Step 3

Exam Tip

(i>1) हो तो कणों की संख्या बढ़ी है। / If (i>1), the number of particles has increased.

Open Question Page
Ask Friends

एक विलेय के लिए उबालांक उन्नयन सामान्य मान से कम पाया जाता है। इसका सबसे संभावित कारण क्या है?

For a solute, elevation in boiling point is found to be lower than the normal expected value. What is the most likely reason?

Explanation opens after your attempt
Correct Answer

A. विलेय का संघटनAssociation of solute

Step 1

Concept

उबालांक उन्नयन कणों की संख्या पर निर्भर करता है। / Elevation in boiling point depends on the number of solute particles.

Step 2

Why this answer is correct

संघटन में कणों की संख्या घटती है इसलिए \(\Delta T_b\) सामान्य से कम होता है। / Association decreases the number of particles so \(\Delta T_b\) becomes lower than normal.

Step 3

Exam Tip

कम अणुसंख्यक गुण का अर्थ प्रायः संघटन होता है। / A reduced colligative property usually suggests association.

Open Question Page
Ask Friends

यदि उबालांक उन्नयन अपेक्षित से तीन गुना है, तो सबसे उचित निष्कर्ष क्या है?

If elevation in boiling point is three times the expected value, what is the most suitable conclusion?

Explanation opens after your attempt
Correct Answer

A. (i=3) और वियोजन हुआ है(i=3) and dissociation has occurred

Step 1

Concept

उबालांक उन्नयन (i) के समानुपाती होता है। / Elevation in boiling point is proportional to (i).

Step 2

Why this answer is correct

तीन गुना उन्नयन का अर्थ (i=3) है। / Three times elevation means (i=3).

Step 3

Exam Tip

(i>1) होने पर कण बढ़े हैं, इसलिए वियोजन हुआ है। / Since (i>1), particles have increased due to dissociation.

Open Question Page
Ask Friends

उबालांक उन्नयन के लिए असामान्य घोल में सही संबंध कौन-सा है?

Which relation is correct for elevation in boiling point in an abnormal solution?

Explanation opens after your attempt
Correct Answer

A. \(\Delta T_b=iK_bm\)

Step 1

Concept

सामान्य संबंध \(\Delta T_b=K_bm\) है। / The normal relation is \(\Delta T_b=K_bm\).

Step 2

Why this answer is correct

असामान्य घोल में कण संख्या के सुधार के लिए (i) से गुणा करते हैं। / In an abnormal solution, multiply by (i) to correct particle number.

Step 3

Exam Tip

इसलिए सही संबंध \(\Delta T_b=iK_bm\) है। / Therefore, the correct relation is \(\Delta T_b=iK_bm\).

Open Question Page
Ask Friends

यदि मापा गया उबालांक उन्नयन अपेक्षित मान का (0.75) गुना है, तो (i) का मान क्या होगा?

If the measured elevation in boiling point is (0.75) times the expected value, what is the value of (i)?

Explanation opens after your attempt
Correct Answer

A. (0.75)

Step 1

Concept

\(\Delta T_b\) का वास्तविक मान (i) से गुणित होता है। / Actual \(\Delta T_b\) is multiplied by (i).

Step 2

Why this answer is correct

वास्तविक मान अपेक्षित का (0.75) गुना है, इसलिए (i=0.75)। / The actual value is (0.75) times the expected value, so (i=0.75).

Step 3

Exam Tip

(i<1) मिलने पर सहयोग की संभावना लिखें। / If (i<1), association is likely.

Open Question Page
Ask Friends

सहयोग के कारण उबालांक उन्नयन पर क्या प्रभाव पड़ेगा?

What happens to elevation in boiling point due to association?

Explanation opens after your attempt
Correct Answer

A. यह घटेगाIt will decrease

Step 1

Concept

उबालांक उन्नयन कणों की संख्या पर निर्भर करता है। / Elevation in boiling point depends on the number of particles.

Step 2

Why this answer is correct

सहयोग से कण कम हो जाते हैं, इसलिए उबालांक उन्नयन घटता है। / Association decreases particles, so elevation in boiling point decreases.

Step 3

Exam Tip

सहयोग को कम सहसंयोजी प्रभाव से जोड़कर याद करें। / Remember association as a cause of smaller colligative effect.

Open Question Page
Ask Friends

यदि प्रेक्षित क्वथनांक उन्नयन अपेक्षित मान से कम है, तो कौन-सी प्रक्रिया संभव है?

If the observed elevation in boiling point is less than the expected value, which process is possible?

Explanation opens after your attempt
Correct Answer

B. आंशिक संघटनPartial association

Step 1

Concept

क्वथनांक उन्नयन कणों की संख्या पर निर्भर करता है। / Elevation in boiling point depends on particle number.

Step 2

Why this answer is correct

कम उन्नयन का मतलब कम प्रभावी कण हैं, जो संघटन से होता है। / A smaller elevation means fewer effective particles, which happens due to association.

Step 3

Exam Tip

कम अणुसंख्य गुणधर्म देखने पर (i<1) सोचें। / When a colligative property is smaller, think of (i<1).

Open Question Page
Ask Friends

वियोजन के कारण उबलांक उन्नयन का प्रेक्षित मान कैसा हो सकता है?

Due to dissociation how can the observed elevation in boiling point behave?

Explanation opens after your attempt
Correct Answer

A. सामान्य से अधिकGreater than normal

Step 1

Concept

उबलांक उन्नयन कण संख्या पर निर्भर करता है। / Elevation in boiling point depends on particle number.

Step 2

Why this answer is correct

वियोजन से कण अधिक हो जाते हैं इसलिए उन्नयन बढ़ सकता है। / Dissociation produces more particles, so elevation can increase.

Step 3

Exam Tip

अधिक कण अधिक सहसंयोजी प्रभाव देते हैं। / More particles give a greater colligative effect.

Open Question Page
Ask Friends

किस स्थिति में उबलांक उन्नयन का प्रेक्षित मान सामान्य से कम हो सकता है?

In which case can the observed elevation in boiling point be less than the normal value?

Explanation opens after your attempt
Correct Answer

A. संघटन होने परWhen association occurs

Step 1

Concept

उबलांक उन्नयन कण संख्या पर निर्भर करता है। / Elevation in boiling point depends on particle number.

Step 2

Why this answer is correct

संघटन से स्वतंत्र कण कम हो जाते हैं इसलिए उन्नयन कम होता है। / Association reduces independent particles, so elevation becomes lower.

Step 3

Exam Tip

कम सहसंयोजी गुण का संकेत संघटन हो सकता है। / A lower colligative effect may indicate association.

Open Question Page
Ask Friends

किसी अज्ञात विलेय का मोलर द्रव्यमान निकालने के लिए क्वथनांक उन्नयन विधि में कौन सी मात्रा सीधे मापी जाती है?

In the boiling point elevation method for molar mass determination, which quantity is directly measured?

Explanation opens after your attempt
Correct Answer

A. विलयन और शुद्ध विलायक के क्वथनांक का अंतरDifference between boiling points of solution and pure solvent

Step 1

Concept

इस विधि में मुख्य माप \(\Delta T_b\) होता है। / The key measured quantity in this method is \(\Delta T_b\).

Step 2

Why this answer is correct

\(\Delta T_b\) शुद्ध विलायक और विलयन के क्वथनांक के अंतर से मिलता है। / \(\Delta T_b\) is the difference between boiling point of solution and pure solvent.

Step 3

Exam Tip

नाम देखकर सीधे मापी जाने वाली राशि पहचानें। / Use the method name to identify the directly measured quantity.

Open Question Page
Ask Friends

एक अज्ञात अवाष्पशील विलेय का मोलर द्रव्यमान क्वथनांक उन्नयन विधि से ज्ञात करना है। यदि विलायक का द्रव्यमान आधा कर दिया जाए और विलेय का द्रव्यमान वही रहे तो उन्नयन पर क्या प्रभाव पड़ेगा?

The molar mass of an unknown non-volatile solute is to be found by boiling point elevation. If the mass of solvent is halved while the mass of solute remains the same, what happens to the elevation?

Explanation opens after your attempt
Correct Answer

A. दोगुना हो जाएगाIt becomes double

Step 1

Concept

क्वथनांक उन्नयन विलेय की मात्रा के सीधे और विलायक की मात्रा के उल्टे अनुपात में होता है। / Boiling point elevation is directly proportional to molality.

Step 2

Why this answer is correct

विलायक आधा होने पर मोललता दोगुनी हो जाती है, इसलिए उन्नयन भी दोगुना होगा। / Halving the solvent mass doubles molality, so elevation also doubles.

Step 3

Exam Tip

परीक्षा में पहले देखें कि किस मात्रा को बदला गया है। / In exams, track solvent mass carefully before using the formula.

Open Question Page
Ask Friends

यदि \(K_b=0.52,K,kg,mol^{-1}\), विलेय (3,g), विलायक (250,g), मोलर द्रव्यमान \(60,g,mol^{-1}\), और (i=2) है, तो \(\Delta T_b\) कितना होगा?

If \(K_b=0.52,K,kg,mol^{-1}\), solute mass is (3,g), solvent mass is (250,g), molar mass is \(60,g,mol^{-1}\), and (i=2), what is \(\Delta T_b\)?

Explanation opens after your attempt
Correct Answer

B. (0.208,K)

Step 1

Concept

विलेय के मोल \(\frac{3}{60}=0.05\) हैं। / Moles of solute \(=\frac{3}{60}=0.05\).

Step 2

Why this answer is correct

(250,g=0.25,kg), इसलिए मोललता (0.2,m) है। / (250,g=0.25,kg), so molality is (0.2,m).

Step 3

Exam Tip

\(\Delta T_b=2\times0.52\times0.2=0.208,K\)। / \(\Delta T_b=2\times0.52\times0.2=0.208,K\).

Open Question Page
Ask Friends

किसी विलेय के (5,g) को (500,g) विलायक में घोलने पर \(\Delta T_b=0.078,K\) है। \(K_b=0.52,K,kg,mol^{-1}\) और (i=1.5) हो तो वास्तविक मोलर द्रव्यमान क्या होगा?

When (5,g) solute is dissolved in (500,g) solvent, \(\Delta T_b=0.078,K\). If \(K_b=0.52,K,kg,mol^{-1}\) and (i=1.5), what is the true molar mass?

Explanation opens after your attempt
Correct Answer

A. \(100,g,mol^{-1}\)

Step 1

Concept

वास्तविक मोललता \(m=\frac{0.078}{1.5\times0.52}=0.1\) है। / True molality \(m=\frac{0.078}{1.5\times0.52}=0.1\).

Step 2

Why this answer is correct

(500,g=0.5,kg), इसलिए मोल \(0.1\times0.5=0.05\) हैं। / (500,g=0.5,kg), so moles \(=0.1\times0.5=0.05\).

Step 3

Exam Tip

मोलर द्रव्यमान \(=\frac{5}{0.05}=100,g,mol^{-1}\)। / Molar mass \(=\frac{5}{0.05}=100,g,mol^{-1}\).

Open Question Page
Ask Friends

किसी विलेय के (2.4,g) को (200,g) विलायक में घोलने पर \(\Delta T_b=0.156,K\) है। यदि \(K_b=0.52,K,kg,mol^{-1}\) और (i=1.5), तो वास्तविक मोलर द्रव्यमान क्या होगा?

When (2.4,g) solute is dissolved in (200,g) solvent, \(\Delta T_b=0.156,K\). If \(K_b=0.52,K,kg,mol^{-1}\) and (i=1.5), what is the true molar mass?

Explanation opens after your attempt
Correct Answer

C. \(60,g,mol^{-1}\)

Step 1

Concept

\(m=\frac{0.156}{1.5\times0.52}=0.2\)। / \(m=\frac{0.156}{1.5\times0.52}=0.2\).

Step 2

Why this answer is correct

(200,g=0.2,kg), इसलिए मोल \(0.2\times0.2=0.04\) हैं। / (200,g=0.2,kg), so moles \(=0.2\times0.2=0.04\).

Step 3

Exam Tip

मोलर द्रव्यमान \(=\frac{2.4}{0.04}=60,g,mol^{-1}\)। / Molar mass \(=\frac{2.4}{0.04}=60,g,mol^{-1}\).

Open Question Page
Ask Friends

किसी विलेय के (4.8,g) को (400,g) विलायक में घोलने पर \(\Delta T_b=0.156,K\) है। यदि \(K_b=0.52,K,kg,mol^{-1}\) और (i=0.75), तो वास्तविक मोलर द्रव्यमान क्या होगा?

When (4.8,g) solute is dissolved in (400,g) solvent, \(\Delta T_b=0.156,K\). If \(K_b=0.52,K,kg,mol^{-1}\) and (i=0.75), what is the true molar mass?

Explanation opens after your attempt
Correct Answer

C. \(60,g,mol^{-1}\)

Step 1

Concept

\(\Delta T_b=iK_bm\), इसलिए \(m=\frac{0.156}{0.75\times0.52}=0.4\)। / From \(\Delta T_b=iK_bm\), \(m=\frac{0.156}{0.75\times0.52}=0.4\).

Step 2

Why this answer is correct

(400,g=0.4,kg), इसलिए मोल \(0.4\times0.4=0.16\) हैं। / (400,g=0.4,kg), so moles \(=0.4\times0.4=0.16\).

Step 3

Exam Tip

मोलर द्रव्यमान \(=\frac{4.8}{0.16}=30,g,mol^{-1}\)। / Molar mass \(=\frac{4.8}{0.16}=30,g,mol^{-1}\).

Open Question Page
Ask Friends

यदि \(K_b=0.52,K,kg,mol^{-1}\), विलेय (1.2,g), विलायक (100,g), और मोलर द्रव्यमान \(60,g,mol^{-1}\) है, तो अवियोजित विलेय के लिए \(\Delta T_b\) कितना होगा?

If \(K_b=0.52,K,kg,mol^{-1}\), solute mass is (1.2,g), solvent mass is (100,g), and molar mass is \(60,g,mol^{-1}\), what will be \(\Delta T_b\) for a non-dissociated solute?

Explanation opens after your attempt
Correct Answer

B. (0.104,K)

Step 1

Concept

विलेय के मोल \(\frac{1.2}{60}=0.02\) हैं। / Moles of solute \(=\frac{1.2}{60}=0.02\).

Step 2

Why this answer is correct

(100,g=0.1,kg), इसलिए मोललता (0.2,m) है। / (100,g=0.1,kg), so molality is (0.2,m).

Step 3

Exam Tip

\(\Delta T_b=0.52\times0.2=0.104,K\)। / \(\Delta T_b=0.52\times0.2=0.104,K\).

Open Question Page
Ask Friends

किसी विलेय के (3.6,g) को (400,g) विलायक में घोलने पर \(\Delta T_b=0.117,K\) है। \(K_b=0.52,K,kg,mol^{-1}\) और (i=1.5) हो तो वास्तविक मोलर द्रव्यमान क्या होगा?

When (3.6,g) solute is dissolved in (400,g) solvent, \(\Delta T_b=0.117,K\). If \(K_b=0.52,K,kg,mol^{-1}\) and (i=1.5), what is the true molar mass?

Explanation opens after your attempt
Correct Answer

B. \(96,g,mol^{-1}\)

Step 1

Concept

वास्तविक मोललता \(m=\frac{0.117}{1.5\times0.52}=0.15\) है। / True molality \(m=\frac{0.117}{1.5\times0.52}=0.15\).

Step 2

Why this answer is correct

(400,g=0.4,kg), इसलिए मोल \(0.15\times0.4=0.06\) हैं। / (400,g=0.4,kg), so moles \(=0.15\times0.4=0.06\).

Step 3

Exam Tip

मोलर द्रव्यमान \(\frac{3.6}{0.06}=60,g,mol^{-1}\)। / Molar mass \(=\frac{3.6}{0.06}=60,g,mol^{-1}\).

Open Question Page
Ask Friends