Hypothesis and experimentation

Correct answer: D. Observation may become biased

When a result is assumed in advance, a person may focus more on observations that match the expectation and give less importance to other relevant evidence. This makes the observation biased. It does not automatically improve measurement accuracy, increase the amount of data, or strengthen equipment. Exam tip: Draw a scientific conclusion only after observing and analysing the data.

Correct answer: B. It can be tested

The direct answer is B: a good hypothesis can be tested. A hypothesis is a reasonable, provisional explanation or prediction based on observations. To test it, we must be able to collect observations or measurements that could support it or show that it is not supported. Option A is wrong because length does not make a hypothesis scientific; clarity matters more. Option B is correct because testability allows an experiment or planned observation. Option C is wrong: a hypothesis is not required to be always correct; testing may reject it, and that still gives scientific knowledge. Option D is wrong because hypotheses commonly involve variables, such as changing light and measuring plant growth. A useful hypothesis often predicts how one factor may affect another. Memory cue: hypothesis means a testable “maybe,” not a guaranteed fact.

Correct answer: C. If a plant receives more light then its growth will increase

This statement gives a testable relationship between light and growth. In exams identify if-then statements.

Correct answer: D. To test a hypothesis

An experiment provides evidence to support or reject a hypothesis. In exams connect experiments with testing.

Correct answer: D. To keep other conditions the same

A controlled variable keeps other influencing conditions the same. In exams identify it for a fair comparison.

Correct answer: A. Amount of water

The amount of water is deliberately changed so it is the independent variable. In exams choose the changed factor.

Correct answer: B. Plant height

A dependent variable is the result that is measured to find out what happened in an experiment. In this investigation, the student changes the amount of water and then measures plant height. Therefore, plant height is the dependent variable. The amount of water is the independent variable because it is the factor deliberately changed to study its possible effect on growth.

Option B is correct because it identifies the measured outcome. Pot colour and the name of the soil are not the result being tested. Soil conditions might matter in a real experiment, but they should be kept controlled if they are not the chosen variable. The important rule is to ask, “What was changed?” for the independent variable and “What was measured?” for the dependent variable.

Correct answer: C. Time taken to dissolve

The direct answer is C, the time taken to dissolve. The hypothesis compares dissolving speed in hot and colder water. Speed here is determined by asking how long the same amount of sugar takes to disappear into the water under controlled conditions. Start a stopwatch when the sugar is added, stop it when it has dissolved according to a stated rule, and compare the times. A shorter time means faster dissolving. Option A, sugar colour, does not measure speed. Option B, cup size, is a possible controlled condition, not the outcome being tested. Option C is correct because time directly measures the rate of this event; ideally water amount, sugar amount, and stirring should also be controlled. Option D, water taste, does not show how quickly sugar dissolved. Memory cue: a speed question needs time.

Correct answer: D. Understand the procedure and safety rules

The procedure and safety rules must be understood before an experiment. In exams give priority to safe working.

Correct answer: A. When there is a risk of splashes to the eyes

Safety goggles protect the eyes from harmful splashes. In exams choose safety equipment according to the risk.

Correct answer: B. To increase reliability of results

Repeating an experiment confirms the result and increases reliability. In exams connect repetition with reliability.

Correct answer: C. In a table or laboratory notebook

Experimental results should be recorded in a table or laboratory notebook because this keeps observations, measurements, and conclusions organised and easy to verify. Relying only on memory can lead to forgotten details, while an unlabelled sheet makes results difficult to identify and compare. Exam tip: use a suitable heading, units, and a table when recording results.

Correct answer: D. Record the result and reconsider the hypothesis

The hypothesis may be incorrect so the actual result must be recorded. In exams give priority to evidence.

Correct answer: A. To provide a basis for comparison

A control group shows the normal condition for comparison with the treated group. In exams understand it as the baseline group.

Correct answer: B. Plant without the new fertiliser

Direct answer: Option B, a plant without the new fertiliser. A control group is treated like the experimental group except for the factor being tested. Here, the factor is the new fertiliser. The untreated plant shows what happens under normal conditions, so its growth can be compared with plants receiving the new fertiliser. Option A is wrong because double fertiliser is another treatment, not a normal baseline. Option B is correct because it lacks the new treatment while other conditions should remain comparable. Option C is wrong because being tallest is an observed result, not a group design. Option D is wrong because a different species introduces another variable and makes comparison unfair. Memory cue: the control group is the “no new treatment” comparison, not necessarily a plant with no care at all.

Correct answer: C. If temperature increases then seeds will germinate faster

Direct answer: Option C, “If temperature increases, seeds will germinate faster.” A hypothesis is a proposed explanation or prediction that can be tested by observation or experiment. A useful hypothesis identifies measurable variables and predicts a relationship. Here, temperature is the independent variable, while germination speed or time is the dependent variable. The experiment could use several temperatures while keeping seed type, water, light, and seed number the same, then compare germination times. Option A is wrong because “good” is vague and not measurable. Option B is wrong because “beautiful” is subjective and unrelated to a testable measurement. Option C is correct because it predicts a measurable relationship. Option D is wrong because “lucky” cannot be measured scientifically. Memory cue: a hypothesis should be testable, measurable, and predictive.

Correct answer: D. To identify the cause of the result clearly

The direct answer is D: to identify the cause of the result clearly. In an experiment, the independent variable is the factor deliberately changed. If several independent variables are changed together, the result may be caused by any one of them or by their combination. Changing only one allows a fair comparison with a control or unchanged condition. Step by step: select one factor, keep other relevant conditions constant, measure the result, and attribute any consistent difference mainly to the selected factor, while recognising possible experimental error. Option A is wrong because attractiveness has nothing to do with scientific validity. Option B is wrong because using more apparatus does not prove causation. Option C is wrong because a good experiment does not need identical results; it needs reliable, interpretable results. Option D is correct because it makes the cause of an observed change easier to identify. This is the logic of a controlled or fair test. Exam cue: one deliberate change gives one clearer explanation.

Correct answer: A. To make it a controlled variable

Keeping the soil type the same reduces its extra effect. In exams treat constant factors as controlled variables.

Correct answer: B. Amounts of water and soil

Keeping water and soil amounts the same allows the effect of light duration to be tested. In exams control other factors.

Correct answer: C. To make the meaning of the measurement clear

Direct answer: Option C, to make the meaning of the measurement clear. A numerical reading needs a unit because the unit identifies the quantity and scale being reported. For example, 10 could mean 10 centimetres, 10 seconds, or 10 grams; these are entirely different observations. Writing “10 cm” tells the reader both the value and the measured length. Option A is wrong because a unit does not decorate or colour a table. Option B is wrong because units do not change a hypothesis. Option C is correct because it makes observations understandable, comparable, and scientifically complete. Option D is wrong because a unit does not stop an experiment. Always write the suitable unit beside every measurement and do not confuse units such as cm and m.

Correct answer: D. Record it accurately

The direct answer is D: record it accurately. An unexpected result is still an observation and may provide important evidence. Science does not allow a researcher to remove, alter, or hide a result merely because it was not predicted. Step by step: observe the result; write exactly what happened, preferably with measurements, units, date, and relevant conditions; check the equipment and method if necessary; repeat the experiment when appropriate; then discuss whether the finding supports the hypothesis. Option A is wrong because deleting an unexpected result creates an incomplete record. Option B is wrong because changing the result is falsification and makes the evidence unreliable. Option C is wrong because hiding it prevents others from judging the investigation and may conceal a genuine effect or a procedural problem. Option D is correct because accurate recording preserves the evidence while later checking can determine its meaning. The result may be due to a real effect, random variation, or an error, but that decision must come after examination. Memory cue: unexpected does not mean unusable—record first, investigate next.

Correct answer: A. To make the experiment correct and repeatable

The correct order makes an experiment systematic and repeatable. In exams remember the importance of procedural sequence.

Correct answer: B. Stopwatch

The direct answer is B, stopwatch. Time tells us when an event occurs or how long an interval lasts. A stopwatch is designed to start, stop, and display elapsed time, so it is suitable for measuring a race, reaction, or dissolving interval. Option A, a thermometer, measures temperature. Option B is correct because it measures a time interval, usually in seconds or minutes. Option C, a balance, measures mass by comparing an object with standard masses or an electronic sensor. Option D, a metre scale, measures length or distance. The instrument must match the physical quantity: time with a stopwatch, temperature with a thermometer, mass with a balance, and length with a scale. Exam cue: identify the quantity before choosing the instrument.

Correct answer: D. Measuring cylinder

The direct answer is D, the measuring cylinder. A liquid has a definite volume, and a measuring cylinder is specially made to measure that volume, usually in millilitres (mL) or litres (L). First place the cylinder on a level surface. Pour the liquid into it, keep your eyes level with the liquid surface, and read the scale at the bottom of the curved meniscus for water-like liquids. Option A, a metre scale, measures length, not liquid volume. Option B, a stopwatch, measures time. Option C, safety goggles protect the eyes and do not measure anything. Option D is correct because its graduated markings directly show liquid volume. A common exam cue is: length—metre scale, time—stopwatch, volume of liquid—measuring cylinder.

Correct answer: A. Using different temperatures and calling temperature the independent variable

The independent variable is the factor that the investigator deliberately changes to study its effect. The dependent variable is the result that is measured, while other relevant conditions should be kept controlled. Identifying these roles helps make an experiment fair and makes the relationship between cause and result easier to examine.

In option A, different temperatures are intentionally used, so temperature is the independent variable. Plant height or another measured outcome would be a dependent variable, not the changed factor. Counting seedlings and recording time describe measurements or conditions, but they do not become independent variables merely because they are mentioned. Therefore option A correctly identifies the deliberately changed factor.