Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects

Class 12 Chemistry Expert Quiz

Level 19 • 50/50 questions • 25 seconds per question.

Level readiness 50/50 Questions
Time Left 20:50 25 sec/question
RewardsCoins + XP
ModeClassic Quiz
Share
Question 1 / 50 0 score
Answered 0/50 Correct 0 Time 20:50

आदर्श विलयन में परासरण दाब से मापा गया मोलर द्रव्यमान वास्तविक मान से आधा आता है। विलेय के कणों के व्यवहार के बारे में सबसे उचित निष्कर्ष क्या है?

In an ideal dilute solution, the molar mass measured from osmotic pressure is half of the true molar mass. What is the most suitable conclusion about the solute particles?

Explanation opens after your attempt
Correct Answer

A. पूर्ण वियोजनComplete dissociation

Step 1

Concept

\(परासरण दाब से (M_{\)obs\(}=\frac{M_{\)true}}{i}) माना जाता है। \(/ From osmotic pressure, (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 2

Why this answer is correct

यदि मापा द्रव्यमान आधा है तो (i=2), यानी कणों की संख्या दोगुनी हुई। / If the observed mass is half, then (i=2), so the number of particles has doubled.

Step 3

Exam Tip

परीक्षा में याद रखें कि कम मोलर द्रव्यमान वियोजन का संकेत देता है। / Remember that a lower observed molar mass usually indicates dissociation.

Open Question Page
Ask Friends

बेंजोइक अम्ल बेंजीन में लगभग द्विगुणित हो जाता है। हिमांक अवनमन से उसका मापा गया मोलर द्रव्यमान वास्तविक द्रव्यमान से कैसा होगा?

Benzoic acid is nearly dimerised in benzene. How will its molar mass measured by depression in freezing point compare with its true molar mass?

Explanation opens after your attempt
Correct Answer

A. लगभग दोगुनाNearly double

Step 1

Concept

द्विगुणन में दो कण मिलकर एक कण बनाते हैं, इसलिए कणों की संख्या घटती है। / In dimerisation, two particles combine to form one particle, so the particle count decreases.

Step 2

Why this answer is correct

\(कणों की संख्या घटने से (i<1) और (M_{\)obs\(}=\frac{M_{\)true}}{i}) बढ़ जाता है। \(/ Because (i<1), (M_{\)obs\(}=\frac{M_{\)true}}{i}) becomes larger.

Step 3

Exam Tip

सहसंयोजन में मापा द्रव्यमान सामान्यतः वास्तविक से अधिक आता है। / Association generally gives a higher observed molar mass.

Open Question Page
Ask Friends

किसी एक-एक विद्युत अपघट्य का (80%) वियोजन हुआ है। उसका वांट हॉफ गुणक कितना होगा?

A (1:1) electrolyte is (80%) dissociated. What will be its van't Hoff factor?

Explanation opens after your attempt
Correct Answer

B. (1.8)

Step 1

Concept

एक-एक विद्युत अपघट्य दो आयन देता है, इसलिए (n=2)। / A (1:1) electrolyte gives two ions, so (n=2).

Step 2

Why this answer is correct

(i=1+\alpha(n-1)=1+0.8(1)=1.8)। / (i=1+\alpha(n-1)=1+0.8(1)=1.8).

Step 3

Exam Tip

वियोजन प्रतिशत को पहले दशमलव में बदलें। / First convert percentage dissociation into decimal form.

Open Question Page
Ask Friends

किसी लवण \(AB_2\) का (60%) वियोजन होता है। पतले विलयन में उसका (i) मान क्या होगा?

A salt \(AB_2\) undergoes (60%) dissociation. What will be its (i) value in dilute solution?

Explanation opens after your attempt
Correct Answer

B. (2.2)

Step 1

Concept

\(AB_2\) वियोजित होकर कुल तीन आयन देता है। / \(AB_2\) dissociates into three ions in total.

Step 2

Why this answer is correct

(i=1+\alpha(n-1)=1+0.6(3-1)=2.2)। / (i=1+\alpha(n-1)=1+0.6(3-1)=2.2).

Step 3

Exam Tip

आयनों की कुल संख्या गिनना सबसे महत्वपूर्ण कदम है। / Counting the total number of ions is the key step.

Open Question Page
Ask Friends

यदि किसी विलेय के लिए (i=0.5) पाया जाता है, तो उसके कणों के बारे में कौन सा कथन सही है?

If (i=0.5) is found for a solute, which statement about its particles is correct?

Explanation opens after your attempt
Correct Answer

A. लगभग द्विगुणन हुआ हैNearly dimerisation occurs

Step 1

Concept

(i<1) का अर्थ है कि विलयन में प्रभावी कणों की संख्या घट गई है।

Step 2

Why this answer is correct

(i=0.5) पूर्ण द्विगुणन के बहुत निकट है। / (i=0.5) is the limiting value for complete dimerisation.

Step 3

Exam Tip

(i) का मान एक से कम मिले तो सहसंयोजन सोचें। / Whenever (i) is less than one, think of association.

Open Question Page
Ask Friends

एक पदार्थ का वास्तविक मोलर द्रव्यमान (120,g mol\(^{-1}) है और हिमांक विधि से मापा गया द्रव्यमान (180\),g mol^{-1}) है। (i) का मान क्या होगा?

A substance has true molar mass (120,g mol\(^{-1}), while the molar mass measured by freezing point method is (180\),g mol\(^{-1}). What is the value of (i)\)?

Explanation opens after your attempt
Correct Answer

A. (0.67)

Step 1

Concept

\(संबंध (i=\frac{M_{\)true\(}}{M_{\)obs}}) लगाते हैं। \(/ Use (i=\frac{M_{\)true\(}}{M_{\)obs}}).

Step 2

Why this answer is correct

\(i=\frac{120}{180}=0.67\) लगभग। / \(i=\frac{120}{180}=0.67\) approximately.

Step 3

Exam Tip

वास्तविक को मापे गए द्रव्यमान से भाग देना न भूलें। / Do not reverse the fraction while calculating (i).

Open Question Page
Ask Friends

यदि \(K_f\) सही है, द्रव्यमान सही है और फिर भी हिमांक अवनमन अपेक्षा से अधिक मिलता है, तो असामान्य मोलर द्रव्यमान का सबसे संभावित कारण क्या है?

If \(K_f\) is correct, masses are correct, and yet the depression in freezing point is greater than expected, what is the most likely cause of abnormal molar mass?

Explanation opens after your attempt
Correct Answer

A. विलेय का वियोजनDissociation of solute

Step 1

Concept

अधिक हिमांक अवनमन का अर्थ है कि प्रभावी कणों की संख्या अधिक है। / A larger depression means more effective solute particles are present.

Step 2

Why this answer is correct

कणों की संख्या बढ़ने का मुख्य कारण वियोजन है। / More particles usually come from dissociation.

Step 3

Exam Tip

अधिक सहगुणधर्मी प्रभाव से मोलर द्रव्यमान कम निकलेगा। / Larger colligative effect leads to a lower observed molar mass.

Open Question Page
Ask Friends

किसी विलेय के द्विगुणन की मात्रा (40%) है। उसके लिए (i) का मान क्या होगा?

A solute undergoes (40%) dimerisation. What is its value of (i)?

Explanation opens after your attempt
Correct Answer

B. (0.80)

Step 1

Concept

द्विगुणन में \(i=1-\frac{\alpha}{2}\) होता है। / For dimerisation, \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(\alpha=0.40\) रखने पर (i=1-0.20=0.80)। / With \(\alpha=0.40\), (i=1-0.20=0.80).

Step 3

Exam Tip

सहसंयोजन में (i) एक से कम रहता है। / Association always makes (i) less than one.

Open Question Page
Ask Friends

यदि (AB) का (50%) वियोजन होकर (A^+) और (B^-) बनते हैं, तो मापा गया मोलर द्रव्यमान वास्तविक द्रव्यमान का कितना होगा?

If (AB) is (50%) dissociated into (A^+) and (B^-), what fraction of the true molar mass will be observed?

Explanation opens after your attempt
Correct Answer

A. दो तिहाईTwo-third

Step 1

Concept

(AB) दो आयन देता है, इसलिए \(i=1+\alpha=1.5\)। / (AB) gives two ions, so \(i=1+\alpha=1.5\).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true\(}}{i}=\frac{2}{3}M_{\)true})। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{i}=\frac{2}{3}M_{\)true}).

Step 3

Exam Tip

वियोजन में मोलर द्रव्यमान घटा हुआ दिखता है। / Dissociation makes observed molar mass smaller.

Open Question Page
Ask Friends

एक सहगुणधर्मी गुण से (i=3) मिला। यदि विलेय \(AlCl_3\) जैसा चार आयन देने वाला पदार्थ है, तो वियोजन की मात्रा कितनी होगी?

A colligative property gives (i=3). If the solute behaves like \(AlCl_3\), producing four ions on complete dissociation, what is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

C. (66.7%)

Step 1

Concept

चार आयनों के लिए (n=4)। / For four ions, (n=4).

Step 2

Why this answer is correct

(i=1+\alpha(n-1)), इसलिए \(3=1+3\alpha\), अतः \(\alpha=\frac{2}{3}\)। / (i=1+\alpha(n-1)), so \(3=1+3\alpha\), giving \(\alpha=\frac{2}{3}\).

Step 3

Exam Tip

अंतिम उत्तर को प्रतिशत में बदलें। / Convert the final value into percentage.

Open Question Page
Ask Friends

निम्न में से कौन सा प्रेक्षण सहसंयोजन के कारण असामान्य मोलर द्रव्यमान को सबसे अच्छे ढंग से दिखाता है?

Which observation best represents abnormal molar mass caused by association?

Explanation opens after your attempt
Correct Answer

A. परासरण दाब अपेक्षा से कमOsmotic pressure lower than expected

Step 1

Concept

सहसंयोजन में कई कण मिलकर कम कण बनाते हैं। / In association, many particles combine and reduce the effective particle count.

Step 2

Why this answer is correct

कम कणों के कारण परासरण दाब जैसे गुण अपेक्षा से कम मिलते हैं। / Due to fewer particles, osmotic pressure becomes lower than expected.

Step 3

Exam Tip

कम सहगुणधर्मी प्रभाव का अर्थ अधिक मापा मोलर द्रव्यमान है। / Lower colligative effect means higher observed molar mass.

Open Question Page
Ask Friends

यदि किसी विलेय के (i) का मान (1.25) है और वह दो आयनों में वियोजित होता है, तो वियोजन की मात्रा कितनी है?

If a solute has (i=1.25) and dissociates into two ions, what is its degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (25%)

Step 1

Concept

दो आयनों के लिए \(i=1+\alpha\)। / For two ions, \(i=1+\alpha\).

Step 2

Why this answer is correct

\(1.25=1+\alpha\), इसलिए \(\alpha=0.25\)। / \(1.25=1+\alpha\), so \(\alpha=0.25\).

Step 3

Exam Tip

\(\alpha\) को (100) से गुणा करके प्रतिशत पाएं। / Multiply \(\alpha\) by (100) to get percentage.

Open Question Page
Ask Friends

एक विलेय का उबलांक वृद्धि प्रयोग में मापा गया द्रव्यमान वास्तविक से तीन गुना है। यह किस प्रकार के कण परिवर्तन के अधिक निकट है?

In a boiling point elevation experiment, the observed molar mass of a solute is three times its true molar mass. Which particle change is it closest to?

Explanation opens after your attempt
Correct Answer

A. त्रिगुणनTrimerisation

Step 1

Concept

\((M_{\)obs\(}=3M_{\)true}) से \(i=\frac{1}{3}\) मिलता है। \(/ (M_{\)obs\(}=3M_{\)true\(}) gives (i=\frac{1}{3}).\)

Step 2

Why this answer is correct

\(i=\frac{1}{3}\) का सीमांत मान तीन कणों के मिलकर एक बनने से जुड़ा है। / This limiting value matches three particles associating into one.

Step 3

Exam Tip

मोलर द्रव्यमान कई गुना अधिक हो तो सहसंयोजन की संख्या सोचें। / If observed molar mass is many times higher, identify the association number.

Open Question Page
Ask Friends

किसी गैर विद्युत अपघट्य में न सहसंयोजन है न वियोजन। उसके लिए (i) का मान क्या होगा?

For a non-electrolyte with neither association nor dissociation, what is the value of (i)?

Explanation opens after your attempt
Correct Answer

C. (1)

Step 1

Concept

सामान्य गैर विद्युत अपघट्य विलयन में कण संख्या नहीं बदलता। / A normal non-electrolyte does not change particle number in solution.

Step 2

Why this answer is correct

जब कण संख्या समान रहती है तो (i=1) होता है। / When the number of particles remains unchanged, (i=1).

Step 3

Exam Tip

असामान्यता तभी आती है जब कण संख्या बदले। / Abnormality appears only when the effective particle count changes.

Open Question Page
Ask Friends

\(यदि (K_b) विधि से मोलर द्रव्यमान (40\),g mol\(^{-1}) आता है जबकि वास्तविक (58.5\),g mol\(^{-1}) है, तो सबसे उचित कारण क्या है\)?

\(If the (K_b) method gives molar mass (40\),g mol\(^{-1}) while the true value is (58.5\),g mol\(^{-1}), what is the most suitable reason\)?

Explanation opens after your attempt
Correct Answer

A. वियोजनDissociation

Step 1

Concept

मापा मोलर द्रव्यमान वास्तविक से कम है। / The observed molar mass is lower than the true value.

Step 2

Why this answer is correct

कम मोलर द्रव्यमान का अर्थ है कि सहगुणधर्मी प्रभाव अपेक्षा से अधिक है। / This means the colligative effect is larger than expected.

Step 3

Exam Tip

ऐसा सामान्यतः वियोजन के कारण होता है। / Such behaviour is generally due to dissociation.

Open Question Page
Ask Friends

एक अम्ल बेंजीन में हाइड्रोजन बंध के कारण द्विगुणित होता है। किस कथन में सही प्रभाव दिया गया है?

An acid dimerises in benzene due to hydrogen bonding. Which statement gives the correct effect?

Explanation opens after your attempt
Correct Answer

A. (i<1) और मोलर द्रव्यमान अधिक(i<1) and molar mass higher

Step 1

Concept

हाइड्रोजन बंध से दो अम्ल अणु मिल सकते हैं। / Hydrogen bonding can join two acid molecules.

Step 2

Why this answer is correct

इससे कणों की संख्या घटती है और (i<1) होता है। / This lowers the particle count and makes (i<1).

Step 3

Exam Tip

(i<1) होने पर मापा मोलर द्रव्यमान बढ़ा हुआ मिलता है। / When (i<1), observed molar mass becomes higher.

Open Question Page
Ask Friends

किसी लवण \(A_2B\) का (25%) वियोजन है। (i) का मान ज्ञात करें।

A salt \(A_2B\) is (25%) dissociated. Find the value of (i).

Explanation opens after your attempt
Correct Answer

B. (1.50)

Step 1

Concept

\(A_2B\) पूर्ण वियोजन पर तीन आयन देता है। / \(A_2B\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.25(3-1)=1.50)। / (i=1+0.25(3-1)=1.50).

Step 3

Exam Tip

सूत्र में (n-1) लेना है, केवल (n) नहीं। / Use (n-1) in the formula, not just (n).

Open Question Page
Ask Friends

\(यदि किसी विलेय के लिए (M_{\)obs\(}>M_{\)true}), तो (i) के बारे में कौन सा कथन सही है?

\(If (M_{\)obs\(}>M_{\)true}) for a solute, which statement about (i) is correct?

Explanation opens after your attempt
Correct Answer

A. (i<1)

Step 1

Concept

\((i=\frac{M_{\)true\(}}{M_{\)obs}}) होता है। \(/ (i=\frac{M_{\)true\(}}{M_{\)obs}}).

Step 2

Why this answer is correct

जब हर बड़ा हो तो अनुपात एक से कम आता है। / If the denominator is larger, the ratio is less than one.

Step 3

Exam Tip

(i<1) सहसंयोजन का संकेत देता है।

Open Question Page
Ask Friends

किसी \(AB_3\) लवण के लिए (i=2.5) पाया गया। वियोजन की मात्रा कितनी है?

For an \(AB_3\) salt, (i=2.5) is observed. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

\(AB_3\) चार आयन देता है, अतः (n=4)। / \(AB_3\) gives four ions, so (n=4).

Step 2

Why this answer is correct

(2.5=1+\alpha(4-1)), इसलिए \(\alpha=0.5\)। / (2.5=1+\alpha(4-1)), so \(\alpha=0.5\).

Step 3

Exam Tip

ऐसे प्रश्नों में पहले कुल आयन गिनें। / Always count total ions before using the formula.

Open Question Page
Ask Friends

समान मोललता वाले चार विलयनों में कौन सा अधिकतम हिमांक अवनमन देगा, यदि वियोजन पूर्ण माना जाए?

Among four solutions of equal molality, which will give the maximum depression in freezing point if dissociation is complete?

Explanation opens after your attempt
Correct Answer

D. \(AlCl_3\)

Step 1

Concept

समान मोललता पर हिमांक अवनमन (i) पर निर्भर करता है। / At equal molality, depression in freezing point depends on (i).

Step 2

Why this answer is correct

पूर्ण वियोजन में \(AlCl_3\) चार आयन देता है, जो सबसे अधिक है। / On complete dissociation, \(AlCl_3\) gives four ions, the highest among the options.

Step 3

Exam Tip

अधिक आयन संख्या का अर्थ अधिक सहगुणधर्मी प्रभाव है। / More ions mean a larger colligative effect.

Open Question Page
Ask Friends

यदि (0.01) मोल विद्युत अपघट्य जल में घुलकर (0.024) मोल प्रभावी कण देता है, तो (i) कितना होगा?

If (0.01) mol of an electrolyte gives (0.024) mol of effective particles in water, what is (i)?

Explanation opens after your attempt
Correct Answer

C. (2.4)

Step 1

Concept

(i) प्रभावी कणों के मोल और प्रारंभिक विलेय मोल का अनुपात है। / (i) is the ratio of effective moles of particles to initial moles of solute.

Step 2

Why this answer is correct

\(i=\frac{0.024}{0.01}=2.4\)। / \(i=\frac{0.024}{0.01}=2.4\).

Step 3

Exam Tip

कणों के अनुपात से (i) सीधे निकाला जा सकता है। / You can calculate (i) directly from particle ratio.

Open Question Page
Ask Friends

किस स्थिति में राउल्ट नियम आधारित मोलर द्रव्यमान वास्तविक से कम मिलने की संभावना अधिक है?

In which situation is Raoult's law based molar mass most likely to be lower than the true value?

Explanation opens after your attempt
Correct Answer

A. विलेय आयनों में टूटता हैSolute breaks into ions

Step 1

Concept

राउल्ट नियम से वाष्पदाब अवनमन कण संख्या पर निर्भर करता है। / Raoult's law based relative lowering of vapour pressure depends on particle count.

Step 2

Why this answer is correct

वियोजन से कण संख्या बढ़ती है, इसलिए प्रभाव अधिक हो जाता है। / Dissociation increases the number of particles, so the effect becomes larger.

Step 3

Exam Tip

अधिक प्रभाव से निकला मोलर द्रव्यमान कम आता है। / A larger effect gives a lower observed molar mass.

Open Question Page
Ask Friends

किसी विलेय का (75%) द्विगुणन है। (i) का मान कितना होगा?

A solute is (75%) dimerised. What is the value of (i)?

Explanation opens after your attempt
Correct Answer

A. (0.625)

Step 1

Concept

द्विगुणन के लिए \(i=1-\frac{\alpha}{2}\)। / For dimerisation, \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(\alpha=0.75\), इसलिए (i=1-0.375=0.625)। / With \(\alpha=0.75\), (i=1-0.375=0.625).

Step 3

Exam Tip

सहसंयोजन की मात्रा बढ़ेगी तो (i) घटेगा। / A higher degree of association lowers (i).

Open Question Page
Ask Friends

यदि प्रयोग में (i=1.9) मिलता है और पदार्थ (NaCl) जैसा दो आयन देता है, तो सबसे सही निष्कर्ष क्या है?

If an experiment gives (i=1.9) and the substance behaves like (NaCl), producing two ions, what is the best conclusion?

Explanation opens after your attempt
Correct Answer

A. लगभग पूर्ण वियोजनNearly complete dissociation

Step 1

Concept

दो आयनों वाले पदार्थ के लिए अधिकतम (i=2) हो सकता है। / For a two-ion electrolyte, the maximum (i) is (2).

Step 2

Why this answer is correct

(i=1.9) इस अधिकतम के बहुत निकट है। / (i=1.9) is very close to this limit.

Step 3

Exam Tip

इसका अर्थ लगभग पूर्ण वियोजन है, पूरी तरह सामान्य व्यवहार नहीं। / It indicates nearly complete dissociation, not normal behaviour.

Open Question Page
Ask Friends

किसी (1:1) विद्युत अपघट्य के लिए मोलर द्रव्यमान वास्तविक का (0.8) गुना मिला। वियोजन की मात्रा क्या होगी?

For a (1:1) electrolyte, the observed molar mass is (0.8) times the true molar mass. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (25%)

Step 1

Concept

\((M_{\)obs\(}=0.8M_{\)true}), अतः \(i=\frac{1}{0.8}=1.25\)। \(/ (M_{\)obs\(}=0.8M_{\)true\(}), so (i=\frac{1}{0.8}=1.25).\)

Step 2

Why this answer is correct

(1:1) विद्युत अपघट्य के लिए \(i=1+\alpha\)। / For a (1:1) electrolyte, \(i=1+\alpha\).

Step 3

Exam Tip

\(\alpha=0.25\), यानी (25%)। / Therefore \(\alpha=0.25\), or (25%).

Open Question Page
Ask Friends

यदि किसी विलेय के लिए वाष्पदाब अवनमन अपेक्षा से आधा मिलता है, तो (i) लगभग कितना होगा?

If the relative lowering of vapour pressure for a solute is found to be half of the expected value, what is (i) approximately?

Explanation opens after your attempt
Correct Answer

A. (0.5)

Step 1

Concept

सहगुणधर्मी गुणों का मान (i) के समानुपाती होता है। / Colligative properties are proportional to (i).

Step 2

Why this answer is correct

यदि प्रभाव आधा है, तो (i) भी लगभग (0.5) होगा। / If the effect is half the expected value, (i) is approximately (0.5).

Step 3

Exam Tip

कम प्रभाव सहसंयोजन की ओर संकेत करता है। / A reduced effect suggests association.

Open Question Page
Ask Friends

कौन सा कथन असामान्य मोलर द्रव्यमान और सहगुणधर्मी गुणों के संबंध को सही बताता है?

Which statement correctly relates abnormal molar mass with colligative properties?

Explanation opens after your attempt
Correct Answer

A. ये गुण कण संख्या पर निर्भर करते हैंThese properties depend on particle number

Step 1

Concept

सहगुणधर्मी गुण विलेय कणों की संख्या पर निर्भर करते हैं, कण की पहचान पर नहीं। / Colligative properties depend on the number of solute particles, not their identity.

Step 2

Why this answer is correct

वियोजन या सहसंयोजन कण संख्या बदल देता है। / Dissociation or association changes this number.

Step 3

Exam Tip

इसी कारण मोलर द्रव्यमान असामान्य निकल सकता है। / Therefore the calculated molar mass can become abnormal.

Open Question Page
Ask Friends

एक पदार्थ (X) जल में \(X \rightarrow 2Y+Z\) के अनुसार (40%) वियोजित होता है। (i) का मान क्या होगा?

A substance (X) dissociates in water as \(X \rightarrow 2Y+Z\) to the extent of (40%). What is (i)?

Explanation opens after your attempt
Correct Answer

B. (1.8)

Step 1

Concept

एक (X) से कुल तीन कण बनते हैं, अतः (n=3)। / One (X) gives three particles, so (n=3).

Step 2

Why this answer is correct

(i=1+\alpha(n-1)=1+0.4(2)=1.8)। / (i=1+\alpha(n-1)=1+0.4(2)=1.8).

Step 3

Exam Tip

समीकरण में बने कुल कण गिनें, केवल अलग प्रकार नहीं। / Count total particles formed, not just different types.

Open Question Page
Ask Friends

यदि किसी विलेय में अर्ध सहसंयोजन होकर दो अणु एक बनने की प्रक्रिया (50%) तक होती है, तो मापा मोलर द्रव्यमान वास्तविक का कितना गुना होगा?

If a solute undergoes (50%) dimerisation, how many times the true molar mass will be observed?

Explanation opens after your attempt
Correct Answer

A. \(\frac{4}{3}\) गुना\(\frac{4}{3}\) times

Step 1

Concept

(50%) द्विगुणन के लिए \(i=1-\frac{0.5}{2}=0.75\)। / For (50%) dimerisation, \(i=1-\frac{0.5}{2}=0.75\).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true\(}}{0.75}=\frac{4}{3}M_{\)true})। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{0.75}=\frac{4}{3}M_{\)true}).

Step 3

Exam Tip

सहसंयोजन में द्रव्यमान का गुणक (1/i) होता है। / In association, the mass factor is (1/i).

Open Question Page
Ask Friends

किसी \(AB_2\) विद्युत अपघट्य के लिए मापा मोलर द्रव्यमान वास्तविक का आधा है। वियोजन की मात्रा क्या होगी?

For an \(AB_2\) electrolyte, the observed molar mass is half of the true molar mass. What is the degree of dissociation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

\((M_{\)obs\(}=\frac{M_{\)true}}{2}) से (i=2)। \(/ (M_{\)obs\(}=\frac{M_{\)true\(}}{2}) gives (i=2).\)

Step 2

Why this answer is correct

\(AB_2\) के लिए (n=3), अतः \(2=1+2\alpha\)। / For \(AB_2\), (n=3), so \(2=1+2\alpha\).

Step 3

Exam Tip

\(\alpha=0.5\), इसलिए वियोजन (50%) है। / \(\alpha=0.5\), so dissociation is (50%).

Open Question Page
Ask Friends

\(एक विद्यार्थी ने (i) को (\frac{M_{\)obs\(}}{M_{\)true}}) लिख दिया। इससे किस प्रकार की गलती होगी?

\(A student writes (i) as (\frac{M_{\)obs\(}}{M_{\)true}}). What kind of mistake will this cause?

Explanation opens after your attempt
Correct Answer

A. वियोजन और सहसंयोजन की पहचान उलट सकती हैDissociation and association may be identified oppositely

Step 1

Concept

\(सही संबंध (i=\frac{M_{\)true\(}}{M_{\)obs}}) है। \(/ The correct relation is (i=\frac{M_{\)true\(}}{M_{\)obs}}).

Step 2

Why this answer is correct

अनुपात उलटने से (i>1) और (i<1) की व्याख्या गलत हो सकती है। / Reversing the ratio can reverse the interpretation of (i>1) and (i<1).

Step 3

Exam Tip

सूत्र लिखने से पहले अर्थ समझें। / Understand the meaning before applying the formula.

Open Question Page
Ask Friends

कौन सा युग्म सही ढंग से मेल खाता है?

Which pair is correctly matched?

Explanation opens after your attempt
Correct Answer

A. वियोजन: (i>1)Dissociation: (i>1)

Step 1

Concept

वियोजन में एक कण से अधिक कण बनते हैं। / In dissociation, one particle produces more particles.

Step 2

Why this answer is correct

इसलिए प्रभावी कण संख्या बढ़ती है और (i>1) होता है। / Hence the effective particle count increases and (i>1).

Step 3

Exam Tip

सहसंयोजन में उल्टा, (i<1) मिलता है। / Association gives the opposite result, (i<1).

Open Question Page
Ask Friends

यदि किसी पदार्थ के लिए (i=0.75) है और वह केवल द्विगुणन करता है, तो द्विगुणन की मात्रा कितनी है?

If a substance has (i=0.75) and undergoes only dimerisation, what is the degree of dimerisation?

Explanation opens after your attempt
Correct Answer

B. (50%)

Step 1

Concept

द्विगुणन में \(i=1-\frac{\alpha}{2}\)। / For dimerisation, \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(0.75=1-\frac{\alpha}{2}\), इसलिए \(\alpha=0.50\)। / \(0.75=1-\frac{\alpha}{2}\), so \(\alpha=0.50\).

Step 3

Exam Tip

(i) जितना कम होगा, सहसंयोजन उतना अधिक होगा। / Lower (i) means greater association.

Open Question Page
Ask Friends

एक विलयन में \(CaCl_2\) का (70%) वियोजन है। (i) कितना होगा?

In a solution, \(CaCl_2\) is (70%) dissociated. What is (i)?

Explanation opens after your attempt
Correct Answer

C. (2.40)

Step 1

Concept

\(CaCl_2\) तीन आयन देता है, अतः (n=3)। / \(CaCl_2\) gives three ions, so (n=3).

Step 2

Why this answer is correct

(i=1+0.70(3-1)=2.40)। / (i=1+0.70(3-1)=2.40).

Step 3

Exam Tip

\(CaCl_2\) को दो नहीं, तीन आयनों वाला मानें। / Treat \(CaCl_2\) as a three-ion electrolyte, not two-ion.

Open Question Page
Ask Friends

किसी प्रयोग में समान मोललता पर (NaCl) विलयन का हिमांक अवनमन ग्लूकोज से लगभग (1.8) गुना है। (NaCl) के बारे में सही निष्कर्ष क्या है?

In an experiment at the same molality, the depression in freezing point of (NaCl) solution is about (1.8) times that of glucose. What is the correct conclusion about (NaCl)?

Explanation opens after your attempt
Correct Answer

A. लगभग (80%) वियोजितNearly (80%) dissociated

Step 1

Concept

ग्लूकोज के लिए (i=1) होता है। / For glucose, (i=1).

Step 2

Why this answer is correct

(NaCl) के लिए प्रभाव (1.8) गुना है, इसलिए (i=1.8)। / The effect for (NaCl) is (1.8) times, so (i=1.8).

Step 3

Exam Tip

दो आयनों के लिए \(i=1+\alpha\), अतः \(\alpha=0.8\)। / For two ions, \(i=1+\alpha\), so \(\alpha=0.8\).

Open Question Page
Ask Friends

किसी विलयन में \(K_2SO_4\) का (50%) वियोजन माना गया। (i) का मान क्या होगा?

In a solution, \(K_2SO_4\) is assumed to be (50%) dissociated. What is (i)?

Explanation opens after your attempt
Correct Answer

B. (2.0)

Step 1

Concept

\(K_2SO_4\) पूर्ण वियोजन पर तीन आयन देता है। / \(K_2SO_4\) gives three ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.5(3-1)=2.0)। / (i=1+0.5(3-1)=2.0).

Step 3

Exam Tip

बहुआयनी लवणों में आयनों की कुल संख्या ध्यान से लिखें। / In polyionic salts, write the total ion count carefully.

Open Question Page
Ask Friends

परासरण दाब विधि में (i) को सीधे किस अनुपात से समझा जा सकता है?

In osmotic pressure method, (i) can be directly understood from which ratio?

Explanation opens after your attempt
Correct Answer

A. वास्तविक परासरण दाब और सामान्य परासरण दाबObserved osmotic pressure to normal osmotic pressure

Step 1

Concept

सामान्य स्थिति में परासरण दाब कण संख्या के अनुसार होता है। / Normally, osmotic pressure depends on particle count.

Step 2

Why this answer is correct

असामान्यता में वास्तविक दाब सामान्य दाब का (i) गुना हो जाता है। / In abnormal behaviour, observed pressure becomes (i) times the normal pressure.

Step 3

Exam Tip

इसलिए दाबों का अनुपात (i) बताता है। / Therefore, the pressure ratio gives (i).

Open Question Page
Ask Friends

किसी पदार्थ का (i=0.25) प्राप्त हुआ। यह किस पूर्ण सहसंयोजन से सबसे अच्छा मेल खाता है?

A substance gives (i=0.25). Which complete association does this best match?

Explanation opens after your attempt
Correct Answer

A. चार अणुओं का एक बननाFour molecules forming one

Step 1

Concept

पूर्ण (m)-गुण सहसंयोजन में \(i=\frac{1}{m}\)। / For complete (m)-fold association, \(i=\frac{1}{m}\).

Step 2

Why this answer is correct

\(i=0.25=\frac{1}{4}\), इसलिए चार अणु मिलकर एक कण बनते हैं। / \(i=0.25=\frac{1}{4}\), so four molecules form one particle.

Step 3

Exam Tip

बहुत छोटा (i) अधिक सहसंयोजन बताता है। / A very small (i) suggests stronger association.

Open Question Page
Ask Friends

यदि किसी पदार्थ का मापा मोलर द्रव्यमान वास्तविक का (0.4) गुना है, तो (i) कितना होगा?

If the observed molar mass of a substance is (0.4) times its true molar mass, what is (i)?

Explanation opens after your attempt
Correct Answer

C. (2.5)

Step 1

Concept

\((M_{\)obs\(}=0.4M_{\)true})। \(/ (M_{\)obs\(}=0.4M_{\)true}).

Step 2

Why this answer is correct

\((i=\frac{M_{\)true\(}}{M_{\)obs}}=\frac{1}{0.4}=2.5)। \(/ (i=\frac{M_{\)true\(}}{M_{\)obs\(}}=\frac{1}{0.4}=2.5).\)

Step 3

Exam Tip

मोलर द्रव्यमान कम दिखे तो (i) एक से अधिक होगा। / If observed molar mass is lower, (i) is greater than one.

Open Question Page
Ask Friends

एक विलेय \(X_2\) विलयन में \(X_2 \rightarrow 2X\) के अनुसार (30%) टूटता है। (i) कितना होगा?

A solute \(X_2\) breaks in solution as \(X_2 \rightarrow 2X\) to the extent of (30%). What is (i)?

Explanation opens after your attempt
Correct Answer

B. (1.30)

Step 1

Concept

एक कण से दो कण बनते हैं, इसलिए (n=2)। / One particle forms two particles, so (n=2).

Step 2

Why this answer is correct

(i=1+0.30(2-1)=1.30)। / (i=1+0.30(2-1)=1.30).

Step 3

Exam Tip

बंध टूटने पर कण बढ़ते हैं और (i) बढ़ता है। / When a particle splits, particle number and (i) increase.

Open Question Page
Ask Friends

एक सहगुणधर्मी प्रयोग में गणना से (i=1) निकला। कौन सा निष्कर्ष सबसे सुरक्षित है?

A colligative experiment gives (i=1). Which conclusion is the safest?

Explanation opens after your attempt
Correct Answer

A. कणों की प्रभावी संख्या सामान्य रहीEffective particle number remained normal

Step 1

Concept

(i=1) का अर्थ है कि कण संख्या अपेक्षित जैसी है। / (i=1) means the effective particle number is as expected.

Step 2

Why this answer is correct

इससे न वियोजन सिद्ध होता है न सहसंयोजन। / It does not prove dissociation or association.

Step 3

Exam Tip

केवल (i=1) देखकर पदार्थ की रचना पर अतिरिक्त निष्कर्ष न लगाएं। / Do not infer extra structural details only from (i=1).

Open Question Page
Ask Friends

किसी विलेय में (60%) त्रिगुणन होता है, अर्थात तीन अणु मिलकर एक कण बनाते हैं। (i) का मान क्या होगा?

A solute undergoes (60%) trimerisation, meaning three molecules combine into one particle. What is (i)?

Explanation opens after your attempt
Correct Answer

B. (0.60)

Step 1

Concept

(m)-गुण सहसंयोजन में \(i=1-\alpha+\frac{\alpha}{m}\)। / For (m)-fold association, \(i=1-\alpha+\frac{\alpha}{m}\).

Step 2

Why this answer is correct

(m=3), \(\alpha=0.60\) रखने पर (i=0.40+0.20=0.60)। / With (m=3), \(\alpha=0.60\), (i=0.40+0.20=0.60).

Step 3

Exam Tip

आंशिक सहसंयोजन में बची और जुड़ी दोनों मात्राएँ जोड़ें। / In partial association, add unassociated and associated contributions.

Open Question Page
Ask Friends

यदि किसी विद्युत अपघट्य के लिए (i) आदर्श अधिकतम से कम है, तो इसका सबसे अच्छा कारण क्या हो सकता है?

If the (i) value for an electrolyte is less than its ideal maximum, what is the best possible reason?

Explanation opens after your attempt
Correct Answer

A. वियोजन अपूर्ण हैDissociation is incomplete

Step 1

Concept

आदर्श अधिकतम (i) पूर्ण वियोजन पर मिलता है। / The ideal maximum (i) is obtained at complete dissociation.

Step 2

Why this answer is correct

उससे कम (i) बताता है कि सभी कण आयनों में नहीं टूटे। / A lower (i) means not all particles have split into ions.

Step 3

Exam Tip

वास्तविक विलयनों में अपूर्ण वियोजन सामान्य हो सकता है। / In real solutions, incomplete dissociation is common.

Open Question Page
Ask Friends

किसी \(AB_4\) लवण का (20%) वियोजन होता है। (i) का मान कितना होगा?

An \(AB_4\) salt is (20%) dissociated. What is the value of (i)?

Explanation opens after your attempt
Correct Answer

B. (1.8)

Step 1

Concept

\(AB_4\) पूर्ण वियोजन पर पांच आयन देता है। / \(AB_4\) gives five ions on complete dissociation.

Step 2

Why this answer is correct

(i=1+0.20(5-1)=1.8)। / (i=1+0.20(5-1)=1.8).

Step 3

Exam Tip

छोटे वियोजन प्रतिशत में भी बहुआयनी लवण का (i) काफी बढ़ सकता है। / Even a small dissociation percentage can raise (i) significantly for multi-ion salts.

Open Question Page
Ask Friends

यदि समान परिस्थितियों में किसी विलेय का परासरण दाब अपेक्षित मान का (0.75) गुना है, तो उसके मापे मोलर द्रव्यमान का वास्तविक से संबंध क्या होगा?

If under identical conditions a solute has osmotic pressure (0.75) times the expected value, how is its observed molar mass related to the true value?

Explanation opens after your attempt
Correct Answer

A. \(\frac{4}{3}\) गुना\(\frac{4}{3}\) times

Step 1

Concept

परासरण दाब का अनुपात (i) देता है, इसलिए (i=0.75)। / The osmotic pressure ratio gives (i), so (i=0.75).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{M_{\)true}}{i})। \(/ (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 3

Exam Tip

\((M_{\)obs\(}=\frac{4}{3}M_{\)true}), इसलिए द्रव्यमान अधिक दिखेगा। \(/ Thus (M_{\)obs\(}=\frac{4}{3}M_{\)true}), so the mass appears higher.

Open Question Page
Ask Friends

किस पदार्थ में जल में असामान्य मोलर द्रव्यमान वियोजन के कारण दिखने की संभावना अधिक है?

Which substance is more likely to show abnormal molar mass in water due to dissociation?

Explanation opens after your attempt
Correct Answer

A. (KCl)

Step 1

Concept

जल ध्रुवीय विलायक है और आयनिक पदार्थों को आयनों में अलग कर सकता है। / Water is polar and can separate ionic substances into ions.

Step 2

Why this answer is correct

(KCl) एक विद्युत अपघट्य है, जबकि बाकी सामान्यतः गैर विद्युत अपघट्य हैं। / (KCl) is an electrolyte, while the others are generally non-electrolytes.

Step 3

Exam Tip

विद्युत अपघट्य में (i>1) मिल सकता है। / Electrolytes can show (i>1).

Open Question Page
Ask Friends

कौन सा कथन बेंजीन में कार्बोक्सिलिक अम्लों के असामान्य मोलर द्रव्यमान को सही समझाता है?

Which statement correctly explains abnormal molar mass of carboxylic acids in benzene?

Explanation opens after your attempt
Correct Answer

A. हाइड्रोजन बंध के कारण द्विगुणनDimerisation due to hydrogen bonding

Step 1

Concept

बेंजीन अध्रुवीय विलायक है, इसलिए आयनीकरण आसान नहीं होता। / Benzene is non-polar, so ionisation is not favoured.

Step 2

Why this answer is correct

कार्बोक्सिलिक अम्ल हाइड्रोजन बंध से द्विगुणित हो सकते हैं। / Carboxylic acids can dimerise through hydrogen bonding.

Step 3

Exam Tip

इससे (i<1) और मापा मोलर द्रव्यमान अधिक मिलता है। / This gives (i<1) and a higher observed molar mass.

Open Question Page
Ask Friends

यदि (i=2.8) और विलेय पूर्ण वियोजन पर तीन आयन दे सकता है, तो वियोजन की मात्रा लगभग कितनी है?

If (i=2.8) and the solute can give three ions on complete dissociation, what is the approximate degree of dissociation?

Explanation opens after your attempt
Correct Answer

C. (90%)

Step 1

Concept

तीन आयनों के लिए \(i=1+2\alpha\)। / For three ions, \(i=1+2\alpha\).

Step 2

Why this answer is correct

\(2.8=1+2\alpha\), इसलिए \(\alpha=0.9\)। / \(2.8=1+2\alpha\), so \(\alpha=0.9\).

Step 3

Exam Tip

\(\alpha=0.9\) को (90%) लिखें। / Write \(\alpha=0.9\) as (90%).

Open Question Page
Ask Friends

किसी पदार्थ का (i=0.6) है और वह केवल द्विगुणन करता है। द्विगुणन की मात्रा कितनी होगी?

A substance has (i=0.6) and undergoes only dimerisation. What is the degree of dimerisation?

Explanation opens after your attempt
Correct Answer

C. (80%)

Step 1

Concept

द्विगुणन के लिए \(i=1-\frac{\alpha}{2}\)। / For dimerisation, \(i=1-\frac{\alpha}{2}\).

Step 2

Why this answer is correct

\(0.6=1-\frac{\alpha}{2}\), इसलिए \(\frac{\alpha}{2}=0.4\) और \(\alpha=0.8\)। / \(0.6=1-\frac{\alpha}{2}\), so \(\frac{\alpha}{2}=0.4\) and \(\alpha=0.8\).

Step 3

Exam Tip

उत्तर (80%) होगा। / The answer is (80%).

Open Question Page
Ask Friends

\(एक परीक्षा प्रश्न में (M_{\)true\(}=100\),g mol^{-1}) और (i=1.25) दिया है। मापा गया मोलर द्रव्यमान कितना होगा?

\(In an exam question, (M_{\)true\(}=100\),g mol\(^{-1}) and (i=1.25) are given. What will be the observed molar mass\)?

Explanation opens after your attempt
Correct Answer

A. (80,g mol\(^{-1})\)

Step 1

Concept

\(संबंध (M_{\)obs\(}=\frac{M_{\)true}}{i}) है। \(/ Use (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 2

Why this answer is correct

\((M_{\)obs\(}=\frac{100}{1.25}=80\),g mol^{-1})। \(/ (M_{\)obs\(}=\frac{100}{1.25}=80\),g mol\(^{-1}).\)

Step 3

Exam Tip

(i>1) होने पर मापा द्रव्यमान घटता है। / When (i>1), the observed molar mass decreases.

Open Question Page
Ask Friends
FAQs

Class 12 Chemistry Quiz FAQs

How many questions are in this quiz?

This level is designed for 50 active questions. Currently 50 questions are available for the selected class and difficulty.

Is there a timer in this quiz?

Yes, the timer uses 25 seconds per question for Expert difficulty and shows the total remaining time on the page.

Can I open each question separately?

Yes, every question has its own SEO-friendly page with answer, explanation and related practice links.