Cutting of DNA

Correct answer: A. Bands will be hard to distinguish

Fragments of similar sizes can run close on gel. A high resolution gel or alternative strategy is needed.

Correct answer: A. The desired DNA band may be lost

Small DNA fragments migrate faster and farther through a gel. If electrophoresis is continued for too long, a small fragment can run off the lower end of the gel, so its desired DNA band will no longer be visible or recoverable. This does not increase the amount of restriction enzyme. Exam tip: a higher-percentage agarose gel and a shorter run time help retain small fragments.

Correct answer: A. Small fragments can run out of gel

The governing concept is size-dependent migration during agarose gel electrophoresis. DNA molecules move through the gel toward the positive electrode, and smaller fragments generally migrate faster than larger fragments. If electrophoresis continues too long, a small restriction fragment may travel beyond the lower edge of the gel and diffuse into the running buffer, making it difficult or impossible to visualize or recover. Therefore option A is correct. Run time should be selected according to gel percentage, voltage, dye-front position, and the size range being examined. A long run does not strengthen the enzyme, guarantee DNA purity, or transform buffer into DNA.

Correct answer: A. Progress of sample migration through the gel

The coloured leading edge of the loading dye, called the dye front, is a visual marker of how far electrophoresis has progressed through the gel. It helps determine when to stop the run before the samples migrate off the gel. It does not indicate restriction-enzyme activity or the DNA sequence. Exam tip: do not confuse the dye front with a DNA band; it is mainly used to monitor run progress.

Correct answer: A. Slow or uneven DNA migration and unclear bands

Ions in the electrophoresis buffer conduct electric current and help maintain a stable pH. When the buffer is exhausted, ionic conduction and pH control decrease, so DNA may migrate slowly or unevenly and the bands can become unclear. Restriction enzymes do not cut DNA during the gel-running step. Exam tip: If bands are weak or smeared, check the freshness and concentration of the buffer, along with the migration direction.

Correct answer: A. DNA can move in the wrong direction

DNA is negatively charged and moves toward positive electrode. Wrong polarity can move sample out of wells.

Correct answer: A. Accurate comparison becomes difficult

In an overexposed image band intensity cannot be compared well. Use proper exposure in documentation.

Correct answer: A. Insert size or amount may be lower

The governing concept is fluorescence or staining intensity as a function of DNA mass in a gel band. A band contains a total amount of DNA determined roughly by concentration multiplied by loaded volume. A small insert, or an insert present in lower copy or lower recovery, may contain less total DNA than the larger vector backbone. It therefore binds less stain and appears fainter, while the vector band appears brighter. Thus option A is correct. Faintness alone does not prove that the insert is protein or that the enzyme cut only the vector; those conclusions require additional controls or sequencing. The vector is DNA, not water.

Correct answer: A. DNA mass in that band

The direct answer is A: gel-band intensity is mainly related to the amount, or mass, of DNA present in that band. DNA stains bind to nucleic acid, so more DNA usually produces a brighter signal under the imaging conditions. Step by step: DNA fragments separate in the gel; a stain binds to the separated DNA; the detector records fluorescence or color; a band containing more total DNA generally appears more intense. Concentration and fragment size both matter because total mass is approximately concentration multiplied by volume, and staining or imaging may not be perfectly linear. A is correct. B is wrong because enzyme taste has no role in DNA staining or electrophoresis. C is wrong because tube color does not determine the DNA amount in a band. D is wrong because water smell is irrelevant. Intensity is not a perfect measurement of exact quantity without standards, so compare carefully. Memory cue: “brighter usually means more DNA, not necessarily a larger fragment.”

Correct answer: A. To keep enzyme activity better

The direct answer is option A: low-salt, clean DNA helps the restriction enzyme remain active and makes digestion more reliable. Restriction enzymes work in a carefully balanced reaction mixture. Excess salt can change ionic strength and may interfere with DNA binding, enzyme structure, or recognition of the restriction site. Other purification residues can also inhibit the enzyme. Therefore, clean DNA with little unwanted salt is a good starting material. Option A is correct because it supports consistent cutting and clearer gel results. Option B is wrong: restriction digestion does not convert DNA into protein. Option C is wrong because DNA does not stop a gel; the gel is the medium through which fragments move during electrophoresis. Option D is wrong because the enzyme is not methylated merely by using low-salt DNA; methylation is a separate chemical or biological modification and may affect some restriction enzymes. Low salt does not guarantee success by itself: the correct buffer, temperature, pH, DNA amount, and incubation time are also needed. Memory cue: clean and low-salt DNA lets the enzyme work without chemical interference.

Correct answer: A. Enzyme binding and specificity are affected

Restriction enzymes work best in recommended salt conditions. Wrong salt can give partial digestion or star activity.

Correct answer: A. There is a risk of damage to the enzyme protein or loss of its activity

Restriction enzymes are proteins. Vigorous vortexing can create shear forces and foaming that may disturb the enzyme’s structure and reduce its ability to cut DNA. The buffer does not evaporate merely because of vortexing; enzymes are usually mixed gently by pipetting or by gently flicking the tube. Exam tip: In enzyme handling, “gentle mixing” helps preserve enzyme activity.

Correct answer: A. To reduce temperature exposure and contamination

The direct answer is A: closing the restriction-enzyme tube quickly reduces unnecessary temperature exposure and the chance of contamination. These enzymes are usually stored cold, and repeated warming, prolonged time outside the recommended temperature, or evaporation can reduce their performance. Step by step: remove the tube briefly; take the required amount with a clean technique; return it promptly to the proper storage condition; close it firmly; this limits warming, contamination, and loss of sample. A is correct. B is wrong because quick closing does not burn DNA. C is wrong because tube handling does not stain a gel. D is wrong because it does not make protein. The exact stability depends on the enzyme and storage instructions, so good practice is to follow the supplier’s guidance and avoid repeated freeze-thaw cycles. Memory cue: “cold, clean, closed.”

Correct answer: A. To reduce the entry of contaminating microorganisms and nucleases that can damage DNA

Sterile technique involves clean equipment, nuclease-free water, and careful handling. It reduces the entry of external microorganisms and, especially, nucleases such as DNase, which can cause unwanted DNA degradation. Sterile handling does not change a restriction enzyme’s sequence specificity. Exam tip: In DNA-based experiments, contamination control and nuclease-free conditions primarily protect the DNA sample.

Correct answer: A. By using a new sterile filter tip for each sample

Using a new sterile, preferably filter, tip for each sample prevents DNA or enzyme from one sample from being transferred to another. Therefore, option A is correct. Reusing the same tip is a major cause of carryover contamination. Exam tip: In DNA handling, change the tip whenever the sample or reagent is changed.

Correct answer: A. To control activity start timing

The governing concept is controlled setup of an enzymatic restriction reaction. Restriction enzyme can begin cleaving DNA as soon as suitable buffer, salt, cofactors, temperature, and substrate are present. Adding the enzyme last, usually while keeping the mixture appropriately cold and mixing gently, minimizes the time during which some tubes could react before all tubes are ready. This improves consistency and helps synchronize the effective start of digestion. Therefore option A is correct. The enzyme is not added last to give it a colour, to turn buffer into a gel, or to convert DNA into RNA. Exact handling should follow the enzyme manufacturer’s instructions.

Correct answer: A. restriction enzyme / Restriction enzyme

The governing concept is a no-enzyme negative control. To test whether DNA changes are caused by restriction digestion rather than handling, the control should contain the same DNA, buffer, water, and other relevant components as the experimental reaction, but it must omit the active restriction enzyme. The untreated control pattern can then be compared with the enzyme-treated sample on a gel. Therefore option A is correct. DNA is needed as the substrate and buffer maintains the required chemical conditions; water adjusts volume and concentration. Omitting these would make the comparison invalid. The purpose is not to create a reaction product, but to reveal the starting or uncut DNA pattern.

Correct answer: A. DNA with a known restriction site and expected fragment pattern

A positive control should contain a known recognition site for the restriction enzyme and should produce a predictable fragment pattern after digestion. Seeing the expected bands confirms that the enzyme, buffer, and incubation conditions are working properly. DNA lacking a site for that enzyme will not be cut, so it cannot verify enzyme activity as a positive control. Exam tip: a positive control must give a known expected result.

Correct answer: A. The site may be absent or blocked in sample

Positive control shows enzyme is active. The sample may have recognition site or methylation issue.

Correct answer: A. Enzyme buffer and incubation condition

Direct answer: Option A, check the enzyme buffer and incubation conditions. Restriction enzymes cut DNA only when the correct buffer, temperature, time, and enzyme activity are available. If both the sample and the positive control remain uncut, the problem is probably common to the reaction setup, not only to the sample DNA. Step by step: first confirm that the enzyme was added and stored correctly; then check its storage temperature, expiry, reaction buffer, buffer concentration, incubation temperature, and incubation time. Option A is correct because these factors affect both tubes. Option B, gel taste, is irrelevant and must never be tested. Option C, DNA colour, does not tell whether the enzyme cut DNA. Option D, tube shape, normally does not determine digestion. A positive control should cut; if it does not, troubleshoot the shared setup before blaming the sample. Memory cue: both fail means check what both share.

Correct answer: A. DNA loading and stain visualization

The governing concept is troubleshooting DNA visualization before interpreting a digestion result. If no bands are visible, first verify that DNA was actually loaded into the correct well, that the loading dye and sample were retained in the well, and that the gel was stained or imaged using an appropriate method. The ladder lane is especially useful: if the ladder is also absent, the problem is likely loading, staining, imaging, gel preparation, or electrophoresis rather than the restriction enzyme. Therefore option A is correct. Enzyme name origin and a student roll number cannot reveal a visualization failure, and agar must never be tasted.

Correct answer: A. Stain visualization or gel run problem

If ladder is not visible it can indicate gel staining imaging or running problem. Do not conclude sample digestion.

Correct answer: A. DNA stain-containing gel waste and used pipette tips

DNA stain-containing gel and used pipette tips may be biological or chemical laboratory waste, so they must be placed in designated containers according to institutional biosafety and chemical-waste rules. A clean notebook or an unused textbook is not laboratory waste. Exam tip: Associate DNA stains, gels, used tips, and gloves with safe disposal procedures.

Correct answer: A. Remember enzyme choice vector map ends gel controls and safety

Both map and enzyme conditions are necessary in cutting plan. Verify result with controls and gel.

Correct answer: A. Correct restriction enzyme cuts vector and insert into planned compatible ends

Direct answer: Option A, the correct restriction enzyme cuts the vector and insert to create planned compatible ends. Recombinant DNA work begins with a map: identify the desired insert, choose suitable restriction sites, and cut both DNA molecules so their ends can join in the intended orientation. Clean DNA, accurate maps, controls, and correct reaction conditions support success. Option A is correct because compatible ends are the practical foundation for later ligation and cloning direction. Option B is wrong: converting DNA into protein is expression, not DNA cutting. Option C is wrong: a restriction enzyme is a protein, not merely salt. Option D is wrong: gel electrophoresis can separate and check fragments, so it is often useful. The summary is not that cutting alone guarantees success; it is that planned cutting is an essential step. Exam cue: cut compatible partners before ligation.