Chemical Reactions and Equations

Correct answer: A. Upward arrow shows gas and downward arrow shows precipitate

In conventional chemical equations, an upward arrow (↑) indicates that a gas is evolved during the reaction. A downward arrow (↓) indicates the formation of an insoluble solid precipitate from a solution. Thus option A correctly assigns both symbols. They do not specifically represent heat or light; those conditions are usually written above the reaction arrow or shown separately.

Correct answer: A. Endothermic reaction

An endothermic reaction absorbs heat from its surroundings. If the absorbed energy is taken from the reaction mixture, its temperature generally falls, so option A is correct. An exothermic reaction releases heat and usually raises the mixture or surroundings temperature. Combustion is normally exothermic, while precipitation describes formation of a solid and does not by itself determine the direction of temperature change.

Correct answer: A. Exothermic reaction

A hot reaction vessel indicates that heat is being released from the reaction to the surroundings. A reaction that releases heat is called an exothermic reaction. In contrast, an endothermic reaction absorbs heat and generally requires energy from outside to keep the reaction going.

Correct answer: A. Because new substances, such as glucose and oxygen, are formed from carbon dioxide and water.

During photosynthesis, carbon dioxide and water are converted into glucose and oxygen in the presence of light and chlorophyll. The formation of new substances is the key feature of a chemical reaction. In contrast, the change of water into water vapour is only a change of state, and no new substance is formed.

Correct answer: C. \(AgNO_3 + NaCl \rightarrow AgCl + NaNO_3\)

In a double displacement reaction, ions of two compounds exchange partners. In \(AgNO_3\) and \(NaCl\), the ions rearrange to form \(AgCl\) and \(NaNO_3\), and insoluble \(AgCl\) is produced as a precipitate. Therefore, option C is correct. In contrast, in option A, zinc displaces hydrogen from hydrochloric acid, so it is a single displacement reaction.

Correct answer: A. Decomposition of silver bromide in light

In a photolytic decomposition reaction, a compound breaks down using light energy. Silver bromide decomposes in light to form silver and bromine: \(2\mathrm{AgBr} \xrightarrow{\text{light}} 2\mathrm{Ag} + \mathrm{Br}_2\). Therefore, option A is correct. Option B is a combination reaction, whereas option C is a displacement reaction.

Correct answer: A. Decomposition of acidified water by electric current

In an electrolytic decomposition reaction, an electric current causes a compound to break down into simpler substances. When electric current is passed through acidified water, it decomposes into hydrogen and oxygen: \(2H_2O(l) \xrightarrow{\text{electric current}} 2H_2(g)+O_2(g)\). Therefore, option A is correct. Option B is a photolytic decomposition reaction caused by light, not by electricity.

Correct answer: A. Heating calcium carbonate

In a thermal decomposition reaction, a compound breaks down into simpler substances on heating. When calcium carbonate is heated, it forms calcium oxide and carbon dioxide:
\(\mathrm{CaCO_3 \xrightarrow{heat} CaO + CO_2}\). Therefore, option A is correct. Electrolysis of water requires electrical energy, whereas the decomposition of silver chloride is caused by light.

Correct answer: A. A chemical reaction cannot be confirmed from colour change alone.

A colour change can indicate a chemical reaction because newly formed substances may have a different colour. However, colour change alone is not conclusive, since colour may also change because of physical factors such as light, heating, or mixing. Other observations, such as evolution of a gas, formation of a precipitate, or a temperature change, should also be considered. Option B is incorrect because a colour change does not always prove a chemical reaction.

Correct answer: A. Gas evolution can also be a sign of a chemical reaction

Chemical reactions may show different observable signs, and no single sign must appear in every reaction. Evolution of a gas can indicate that a new gaseous substance has formed, even if the colour remains unchanged. Therefore option A is the correct conclusion. Colour change is only one possible indicator, and gas evolution is not automatically a physical change; its cause and the substances involved must be considered.

Correct answer: A. Chemical formulae are changed to balance the equation.

In a balanced chemical equation, the number of atoms of each element is equal on both sides, so it follows the law of conservation of mass. Only the coefficients written before chemical formulae are changed during balancing. Changing a chemical formula changes the identity and composition of a substance; therefore, option A is incorrect.

Correct answer: A. To remove the magnesium oxide layer from its surface

A thin layer of magnesium oxide forms on the surface of magnesium ribbon due to its reaction with oxygen in air. This layer prevents direct contact between magnesium and oxygen, so the ribbon does not burn readily. Rubbing removes the oxide layer and allows magnesium to burn easily. Increasing the mass is not the purpose of cleaning.

Correct answer: A. In displacement, one element replaces another, while in double displacement, ions exchange

In a displacement reaction, a more reactive element replaces a less reactive element in a compound, such as Zn + CuSO₄ → ZnSO₄ + Cu. In a double displacement reaction, two ionic compounds exchange ions, often forming a precipitate, water, or gas, as in AgNO₃ + NaCl → AgCl + NaNO₃. Thus option A correctly states the fundamental difference.

Correct answer: A. In moist open air

Rusting of iron requires both water (moisture) and oxygen. Moist open air provides both moisture and oxygen, so an iron object is most likely to rust there. In contrast, a layer of oil or paint prevents iron from coming into contact with air and moisture.

Correct answer: A. Keeping food in an airtight container in a cool place

Rancidity occurs when oils and fats undergo oxidation, producing an unpleasant smell and taste. An airtight container reduces contact with oxygen, and a cool place slows the rate of oxidation. In contrast, open air or sunlight can increase rancidity because of oxygen and heat.

Correct answer: A. Double displacement reaction

In a double displacement reaction, the cations and anions of two compounds exchange partners. Its general form is \(AB + CD \rightarrow AD + CB\). For example, in \(Na_2SO_4 + BaCl_2 \rightarrow BaSO_4 + 2NaCl\), the ions exchange partners. In contrast, a combination reaction generally forms one product from reactants rather than exchanging ions.

Correct answer: A. Unbalanced

In a balanced chemical equation, the number of atoms of each element must be the same on the reactant and product sides. Here, there are 2 oxygen atoms on the left and 1 on the right, so the equation is unbalanced. Option B is incorrect because oxygen atoms, too, must be equal on both sides of a balanced equation.

Correct answer: C. Double displacement reactions (precipitation reactions)

State symbols like \((aq)\) (aqueous) and \((s)\) (solid) are especially useful in double displacement (precipitation) reactions. In these reactions, ions in solution exchange partners, and an insoluble product forms. Writing \((s)\) for that product clearly shows that a solid separates out from the aqueous solution.

Correct answer: A. Both often occur together in the same reaction

Oxidation and reduction are complementary processes. In a redox reaction, one substance loses electrons or gains oxygen and is oxidised, while another substance gains electrons or loses oxygen and is reduced. These changes occur simultaneously because electrons transferred by one species are accepted by another. Therefore option A is correct; a precipitate is not required, and redox changes are chemical rather than merely physical.

Correct answer: A. A physical change caused by dilution

When water is added to a coloured solution, the colour becomes lighter because the solution is diluted. Its concentration changes, but no new substance is formed, so this is a physical change. A change in colour or colour intensity alone is not definite proof of a chemical reaction. In contrast, a chemical reaction produces new substances.

Correct answer: A. Photolytic decomposition

In photolytic decomposition, light energy helps break chemical bonds in a compound. For example, silver chloride decomposes in sunlight: \(2\mathrm{AgCl}\xrightarrow{\text{sunlight}}2\mathrm{Ag}+\mathrm{Cl}_2\). In contrast, electrolytic decomposition uses electrical energy, whereas thermal decomposition uses heat energy.

Correct answer: A. A gas may have formed, and the process may have absorbed heat.

Bubbles may indicate the formation of a gas, and a cold container may indicate absorption of heat. Therefore, option A correctly uses cautious wording such as “may.” The observations alone cannot establish a specific change such as rusting with certainty.

Correct answer: B. Two

The unbalanced equation is \(\mathrm{Mg + O_2 \rightarrow MgO}\). There are 2 oxygen atoms on the left, so a coefficient of 2 is placed before \(\mathrm{MgO}\): \(\mathrm{Mg + O_2 \rightarrow 2MgO}\). There are then 2 magnesium atoms on the right, so placing 2 before magnesium gives the balanced equation \(\mathrm{2Mg + O_2 \rightarrow 2MgO}\). Therefore, the correct coefficient is 2; using 1 would leave the oxygen atoms unbalanced.

Correct answer: B. Two to one

In the balanced equation \(2\mathrm{H_2} + \mathrm{O_2} \rightarrow 2\mathrm{H_2O}\), the coefficient of \(\mathrm{H_2}\) is 2 and that of \(\mathrm{O_2}\) is 1. Therefore, the ratio of reacting hydrogen molecules to oxygen molecules is \(2:1\). This is different from comparing the numbers of hydrogen and oxygen atoms in the product.

Correct answer: A. Calcium oxide and carbon dioxide

Calcium carbonate undergoes thermal decomposition on heating:
\(\mathrm{CaCO_3 \xrightarrow{\Delta} CaO + CO_2}\).
Therefore, the products are calcium oxide and carbon dioxide. Calcium hydroxide is formed when calcium oxide reacts with water; it is not formed by directly heating calcium carbonate.