Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects
Topic Wise MCQ

Chemistry 5: Colligative Properties MCQ Questions for Class 12 General

Practice focused topic-wise MCQs with answers and explanations for quick revision and exam preparation.

Share

Start 5: Colligative Properties Topic Quiz

Difficulty select karke sirf is topic ke focused MCQs practice karein. Score, timer aur explanations student-friendly flow me milenge.

Topic Navigation

Continue Chapter Revision

5: Colligative Properties Practice Questions

Showing 291-300 of 596 questions.

Search

यदि (0.2) मोल विलेय (400) ग्राम विलायक में घुलता है और \(K_b=0.5\), तो अविद्युत अपघट्य के लिए \(\Delta T_b\) कितना होगा?

If (0.2) mole solute dissolves in (400) gram solvent and \(K_b=0.5\), what is \(\Delta T_b\) for a non-electrolyte?

Explanation opens after your attempt
Correct Answer

B. \(0.25\)

Step 1

Concept

(400) ग्राम (0.4) किलोग्राम है, इसलिए \(m=\frac{0.2}{0.4}=0.5\)। / (400) gram is (0.4) kilogram, so \(m=\frac{0.2}{0.4}=0.5\).

Step 2

Why this answer is correct

\(\Delta T_b=K_bm=0.5 \times 0.5=0.25\)। / \(\Delta T_b=K_bm=0.5 \times 0.5=0.25\).

Step 3

Exam Tip

इकाई परिवर्तन सही होने पर संख्यात्मक प्रश्न आसान हो जाता है। / Correct unit conversion makes the numerical simple.

Open Question Page
Ask Friends

किस कथन में सहयोगी गुणों की सही समझ दी गई है?

Which statement gives the correct understanding of colligative properties?

Explanation opens after your attempt
Correct Answer

B. ये केवल विलेय कणों की प्रभावी संख्या पर निर्भर करते हैंThey depend only on effective number of solute particles

Step 1

Concept

सहयोगी गुणों में विलेय का रंग या नाम मुख्य नहीं होता। / In colligative properties, colour or name of solute is not the main factor.

Step 2

Why this answer is correct

मुख्य बात घुले हुए कणों की प्रभावी संख्या है। / The key factor is effective number of dissolved particles.

Step 3

Exam Tip

आयनीकरण और संघटन इसी संख्या को बदलते हैं। / Ionisation and association change this number.

Open Question Page
Ask Friends

यदि किसी विलयन में विलेय पूर्णतः तीन आयनों में टूटता है, तो आदर्श (i) कितना होगा?

If a solute completely dissociates into three ions in solution, what will be the ideal (i)?

Explanation opens after your attempt
Correct Answer

C. \(3\)

Step 1

Concept

आदर्श पूर्ण आयनीकरण में (i) लगभग बने हुए आयनों की संख्या के बराबर होता है। / In ideal complete dissociation, (i) is nearly equal to the number of ions formed.

Step 2

Why this answer is correct

तीन आयन बनने पर प्रभावी कण संख्या तीन गुना होती है। / Three ions mean three times effective particles.

Step 3

Exam Tip

इसलिए आदर्श (i = 3) होगा। / Hence ideal (i = 3).

Open Question Page
Ask Friends

यदि दो अविद्युत अपघट्य विलयनों की मोललता समान है और विलायक भी समान है, तो उनका \(\Delta T_f\) कैसा होगा?

If two non-electrolyte solutions have the same molality and the same solvent, how will their \(\Delta T_f\) compare?

Explanation opens after your attempt
Correct Answer

A. समान होगाSame

Step 1

Concept

अविद्युत अपघट्य के लिए \(i=1\) माना जाता है। / For non-electrolytes, \(i=1\).

Step 2

Why this answer is correct

समान विलायक में \(K_f\) समान और मोललता भी समान है। / In the same solvent, \(K_f\) is same and molality is also same.

Step 3

Exam Tip

इसलिए \(\Delta T_f\) समान होगा। / Therefore \(\Delta T_f\) will be same.

Open Question Page
Ask Friends

यदि दो विलयनों की मोललता समान है लेकिन एक में विलेय आयनीकृत होता है, तो किसका सहयोगी प्रभाव अधिक होगा?

If two solutions have the same molality but solute ionises in one of them, which will have greater colligative effect?

Explanation opens after your attempt
Correct Answer

A. जिसमें आयनीकरण होता हैThe one in which ionisation occurs

Step 1

Concept

आयनीकरण से एक कण कई आयनों में टूट सकता है। / Ionisation can split one particle into several ions.

Step 2

Why this answer is correct

इससे प्रभावी कण संख्या बढ़ती है। / This increases effective particle number.

Step 3

Exam Tip

समान मोललता पर आयनीकृत विलयन का सहयोगी प्रभाव अधिक होगा। / At the same molality, the ionised solution shows greater colligative effect.

Open Question Page
Ask Friends

सहयोगी गुणों के संख्यात्मक प्रश्न में सही उत्तर पाने के लिए सबसे पहले क्या करना चाहिए?

In a numerical question on colligative properties, what should be done first to get the correct answer?

Explanation opens after your attempt
Correct Answer

A. प्रश्न में लागू गुण और सूत्र पहचाननाIdentify the applicable property and formula

Step 1

Concept

पहले तय करें कि प्रश्न वाष्प-दाब, क्वथनांक, हिमांक या परासरण दाब से जुड़ा है। / First decide whether the question is about vapour pressure, boiling point, freezing point or osmotic pressure.

Step 2

Why this answer is correct

फिर (i), मोललता, मोल अंश या सांद्रता की जरूरत देखें। / Then check whether (i), molality, mole fraction or concentration is needed.

Step 3

Exam Tip

अंत में मात्रक बदलकर गणना करें। / Finally convert units and calculate.

Open Question Page
Ask Friends

एक विलयन में (0.1) मोल (NaCl) पूर्ण रूप से आयनों में टूटता है। यदि समान मोललता पर यूरिया की तुलना की जाए, तो (NaCl) के विलयन में क्वथनांक उन्नयन लगभग कितना होगा?

In a solution, (0.1) mol of (NaCl) dissociates completely into ions. At the same molality, what will be the boiling point elevation of the (NaCl) solution compared with urea?

Explanation opens after your attempt
Correct Answer

C. यूरिया का लगभग दोगुनाNearly double of urea

Step 1

Concept

क्वथनांक उन्नयन कणों की संख्या पर निर्भर करता है। / Boiling point elevation depends on the number of solute particles.

Step 2

Why this answer is correct

यूरिया नहीं टूटता, जबकि (NaCl) से लगभग दो कण बनते हैं, इसलिए प्रभाव लगभग दोगुना होगा। / Urea does not dissociate, while (NaCl) gives about two particles, so the effect is nearly doubled.

Step 3

Exam Tip

परीक्षा में विद्युत अपघट्य के लिए (i) को अवश्य लगाएं। / In exams, always include (i) for electrolytes.

Open Question Page
Ask Friends

निम्नलिखित में से कौन-सा गुणधर्म विलेय कणों की संख्या पर निर्भर करता है, उनके रासायनिक स्वभाव पर नहीं?

Which of the following properties depends on the number of solute particles rather than their chemical nature?

Explanation opens after your attempt
Correct Answer

C. हिमांक में अवनमन

Explanation

Simple Explanation

हिमांक में अवनमन एक अणुसंख्यात्मक गुणधर्म है; इसका मान विलयन में उपस्थित विलेय कणों की संख्या पर निर्भर करता है। पृष्ठ तनाव और श्यानता विलेय के रासायनिक स्वभाव से भी बदलते हैं। परीक्षा टिप: अणुसंख्यात्मक गुणधर्मों में हिमांक अवनमन, क्वथनांक उन्नयन और परासरण दाब याद रखें। / Depression in freezing point is a colligative property, so it depends on the number of solute particles present. Surface tension and viscosity also depend on the chemical nature of the solute. Exam tip: remember freezing-point depression, boiling-point elevation, and osmotic pressure as colligative properties.

Open Question Page
Ask Friends

किस स्थिति में परासरण दाब से मोलर द्रव्यमान निकालना हिमांक अवनमन की तुलना में अधिक उपयोगी होता है?

In which situation is osmotic pressure more useful than freezing point depression for determining molar mass?

Explanation opens after your attempt
Correct Answer

B. जब विलयन बहुत तनु हो और जैव अणु उपस्थित होंWhen the solution is very dilute and biomolecules are present

Step 1

Concept

परासरण दाब बहुत छोटे सांद्रण पर भी आसानी से मापा जा सकता है। / Osmotic pressure can be measured accurately even for very dilute solutions.

Step 2

Why this answer is correct

जैव अणु प्रायः बड़े मोलर द्रव्यमान वाले होते हैं और उनका विलयन बहुत तनु रखा जाता है, इसलिए यह विधि बेहतर है। / Biomolecules often have large molar masses and are studied in dilute solutions, so this method is better.

Step 3

Exam Tip

बड़े अणुओं के लिए परासरण दाब विधि को प्राथमिकता दें। / Prefer osmotic pressure for large molecules.

Open Question Page
Ask Friends

यदि \(AB_2\) पूर्ण रूप से \(A^{2+}\) और (2B^-) में टूटता है, तो आदर्श (i) का मान क्या होगा?

If \(AB_2\) dissociates completely into \(A^{2+}\) and (2B^-), what is the ideal value of (i)?

Explanation opens after your attempt
Correct Answer

C. (3)

Step 1

Concept

(i) विलयन में बनने वाले कुल कणों की संख्या का अनुपात बताता है। / (i) represents the ratio of particles formed in solution.

Step 2

Why this answer is correct

एक \(AB_2\) इकाई से (1+2=3) आयन बनते हैं। / One unit of \(AB_2\) gives (1+2=3) ions.

Step 3

Exam Tip

पूर्ण वियोजन में (i) सीधे कुल आयनों की संख्या के बराबर लें। / For complete dissociation, (i) equals the total number of ions formed.

Open Question Page
Ask Friends