Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects

Class 12 Chemistry - Chapter 01: Solutions - 4: Vapour Pressure Medium Quiz

Level 11 • 50/50 questions • 35 seconds per question.

Level readiness 50/50 Questions
Time Left 29:10 35 sec/question
RewardsCoins + XP
ModeClassic Quiz
Share
Question 1 / 50 0 score
Answered 0/50 Correct 0 Time 29:10

यदि विलायक का मोल अंश घटता है, तो राउल्ट नियम के अनुसार विलायक के आंशिक वाष्प दाब में क्या परिवर्तन होगा?

If the mole fraction of the solvent decreases, what happens to the partial vapour pressure of the solvent according to Raoult's law?

Explanation opens after your attempt
Correct Answer

A. वह घटेगाIt will decrease

Step 1

Concept

राउल्ट नियम के अनुसार विलायक का वाष्प दाब उसके मोल अंश पर निर्भर करता है। / According to Raoult's law, the vapour pressure of a solvent depends on its mole fraction.

Step 2

Why this answer is correct

मोल अंश घटने पर सतह से निकलने वाले विलायक अणुओं की संख्या घटती है, इसलिए वाष्प दाब घटता है। / When mole fraction decreases, fewer solvent molecules escape from the surface, so vapour pressure decreases.

Step 3

Exam Tip

ऐसे प्रश्नों में मोल अंश और वाष्प दाब को सीधे संबंध में याद रखें। / In such questions, remember the direct relation between mole fraction and vapour pressure.

Open Question Page
Ask Friends

शुद्ध विलायक का वाष्प दाब (80) किलोपास्कल है और विलयन में विलायक का मोल अंश (0.75) है। विलायक का आंशिक वाष्प दाब कितना होगा?

The vapour pressure of a pure solvent is (80) kilopascal and the mole fraction of solvent in the solution is (0.75). What is the partial vapour pressure of the solvent?

Explanation opens after your attempt
Correct Answer

A. (60) किलोपास्कल(60) kilopascal

Step 1

Concept

राउल्ट नियम में विलयन का वाष्प दाब शुद्ध विलायक के वाष्प दाब और मोल अंश के गुणन से मिलता है। / In Raoult's law, the vapour pressure in solution is obtained by multiplying pure solvent vapour pressure with mole fraction.

Step 2

Why this answer is correct

\(0.75 \times 80 = 60\) किलोपास्कल। / \(0.75 \times 80 = 60\) kilopascal.

Step 3

Exam Tip

मोल अंश एक से कम हो तो आंशिक वाष्प दाब शुद्ध विलायक से कम होगा। / If mole fraction is less than one, partial vapour pressure is less than that of the pure solvent.

Open Question Page
Ask Friends

एक अवाष्पशील विलेय मिलाने पर विलयन का वाष्प दाब शुद्ध विलायक से कम क्यों हो जाता है?

Why does the vapour pressure of a solution become lower than that of the pure solvent when a non-volatile solute is added?

Explanation opens after your attempt
Correct Answer

A. सतह पर विलायक अणुओं का अनुपात घट जाता हैThe fraction of solvent molecules at the surface decreases

Step 1

Concept

अवाष्पशील विलेय स्वयं वाष्प में नहीं जाता। / A non-volatile solute does not enter the vapour phase.

Step 2

Why this answer is correct

वह सतह पर कुछ स्थान घेरता है, जिससे विलायक अणुओं का अनुपात कम हो जाता है। / It occupies some surface positions, reducing the fraction of solvent molecules.

Step 3

Exam Tip

वाष्प दाब में कमी को सतह पर विलायक अणुओं की कमी से समझें। / Understand lowering of vapour pressure through the reduced number of solvent molecules at the surface.

Open Question Page
Ask Friends

आदर्श विलयन में दो वाष्पशील घटकों का कुल वाष्प दाब कैसे प्राप्त किया जाता है?

How is the total vapour pressure of an ideal solution containing two volatile components obtained?

Explanation opens after your attempt
Correct Answer

A. दोनों घटकों के आंशिक वाष्प दाबों को जोड़करBy adding the partial vapour pressures of both components

Step 1

Concept

दो वाष्पशील घटक अपने अपने आंशिक वाष्प दाब देते हैं। / Two volatile components exert their own partial vapour pressures.

Step 2

Why this answer is correct

आदर्श विलयन में कुल वाष्प दाब इन दोनों आंशिक दाबों का योग होता है। / In an ideal solution, total vapour pressure is the sum of these partial pressures.

Step 3

Exam Tip

कुल दाब के प्रश्न में पहले हर घटक का आंशिक दाब निकालें। / In total pressure questions, first calculate the partial pressure of each component.

Open Question Page
Ask Friends

किसी द्रव का वाष्प दाब अधिक है। उसके अंतराअणुक आकर्षण के बारे में कौन सा कथन सही है?

A liquid has high vapour pressure. Which statement about its intermolecular attraction is correct?

Explanation opens after your attempt
Correct Answer

A. अंतराअणुक आकर्षण अपेक्षाकृत कमजोर हैIntermolecular attraction is comparatively weak

Step 1

Concept

वाष्प दाब अणुओं के द्रव से बाहर निकलने की प्रवृत्ति से जुड़ा है। / Vapour pressure is related to the tendency of molecules to escape from liquid.

Step 2

Why this answer is correct

कमजोर आकर्षण होने पर अणु आसानी से वाष्प बनते हैं, इसलिए दाब अधिक होता है। / Weak attraction allows molecules to form vapour easily, so pressure is higher.

Step 3

Exam Tip

अधिक वाष्प दाब को कमजोर आकर्षण और अधिक वाष्पशीलता से जोड़ें। / Link high vapour pressure with weak attraction and high volatility.

Open Question Page
Ask Friends

यदि शुद्ध विलायक का वाष्प दाब (100) किलोपास्कल है और विलयन का वाष्प दाब (90) किलोपास्कल है, तो वाष्प दाब में आपेक्षिक कमी कितनी है?

If the vapour pressure of a pure solvent is (100) kilopascal and the vapour pressure of solution is (90) kilopascal, what is the relative lowering of vapour pressure?

Explanation opens after your attempt
Correct Answer

A. (0.10)

Step 1

Concept

पहले कमी निकालें: (100 - 90 = 10) किलोपास्कल। / First find the lowering: (100 - 90 = 10) kilopascal.

Step 2

Why this answer is correct

आपेक्षिक कमी (10) को (100) से भाग देने पर (0.10) आती है। / Relative lowering is (10) divided by (100), which is (0.10).

Step 3

Exam Tip

आपेक्षिक कमी में हमेशा कमी को शुद्ध विलायक के वाष्प दाब से भाग दें। / Always divide the lowering by the vapour pressure of the pure solvent.

Open Question Page
Ask Friends

अवाष्पशील विलेय वाले पतले विलयन में वाष्प दाब की आपेक्षिक कमी किसके बराबर मानी जाती है?

For a dilute solution containing a non-volatile solute, relative lowering of vapour pressure is taken equal to what?

Explanation opens after your attempt
Correct Answer

A. विलेय के मोल अंश केMole fraction of solute

Step 1

Concept

अवाष्पशील विलेय विलायक का वाष्प दाब घटाता है। / A non-volatile solute lowers solvent vapour pressure.

Step 2

Why this answer is correct

पतले विलयन में यह आपेक्षिक कमी विलेय के मोल अंश के बराबर मानी जाती है। / In a dilute solution, relative lowering is taken equal to the mole fraction of solute.

Step 3

Exam Tip

संख्यात्मक प्रश्न में आपेक्षिक कमी को विलेय के मोल अंश से जोड़ें। / In numerical problems, connect relative lowering with solute mole fraction.

Open Question Page
Ask Friends

वाष्प दाब में कमी को सांख्यिक गुण क्यों माना जाता है?

Why is lowering of vapour pressure considered a colligative property?

Explanation opens after your attempt
Correct Answer

A. क्योंकि यह विलेय कणों की संख्या पर निर्भर करती हैBecause it depends on the number of solute particles

Step 1

Concept

सांख्यिक गुण विलेय कणों की संख्या से प्रभावित होते हैं। / Colligative properties are affected by the number of solute particles.

Step 2

Why this answer is correct

वाष्प दाब में कमी भी सतह पर विलायक अणुओं के अनुपात और विलेय कणों की संख्या से जुड़ी है। / Lowering of vapour pressure is also connected with solute particle number and solvent fraction at the surface.

Step 3

Exam Tip

गुण को पहचानते समय संख्या पर निर्भरता खोजें। / To identify such properties, look for dependence on particle number.

Open Question Page
Ask Friends

एक विलयन में विलायक का मोल अंश (0.9) है। यदि शुद्ध विलायक का वाष्प दाब (50) किलोपास्कल है, तो विलयन में विलायक का वाष्प दाब कितना होगा?

In a solution, the mole fraction of solvent is (0.9). If the vapour pressure of pure solvent is (50) kilopascal, what is the vapour pressure of solvent in the solution?

Explanation opens after your attempt
Correct Answer

A. (45) किलोपास्कल(45) kilopascal

Step 1

Concept

राउल्ट नियम के अनुसार वाष्प दाब मोल अंश और शुद्ध वाष्प दाब के गुणन से मिलेगा। / According to Raoult's law, vapour pressure is obtained by multiplying mole fraction with pure solvent vapour pressure.

Step 2

Why this answer is correct

\(0.9 \times 50 = 45\) किलोपास्कल। / \(0.9 \times 50 = 45\) kilopascal.

Step 3

Exam Tip

उत्तर शुद्ध विलायक के वाष्प दाब से कम होना चाहिए, इससे गणना जाँचें। / Check that the answer is lower than the pure solvent vapour pressure.

Open Question Page
Ask Friends

जब किसी द्रव का वाष्प दाब बाहरी दाब के बराबर हो जाता है, तब क्या होता है?

What happens when the vapour pressure of a liquid becomes equal to external pressure?

Explanation opens after your attempt
Correct Answer

A. द्रव उबलने लगता हैThe liquid starts boiling

Step 1

Concept

उबाल आने की शर्त द्रव के वाष्प दाब और बाहरी दाब की बराबरी है। / The condition for boiling is equality of vapour pressure and external pressure.

Step 2

Why this answer is correct

इस बराबरी पर द्रव के भीतर वाष्प बुलबुले स्थिर रूप से बनते हैं। / At this point, vapour bubbles can form inside the liquid.

Step 3

Exam Tip

क्वथनांक को हमेशा बाहरी दाब से जोड़कर समझें। / Always understand boiling point with reference to external pressure.

Open Question Page
Ask Friends

ऊँचाई पर जल कम ताप पर क्यों उबलता है?

Why does water boil at a lower temperature at high altitude?

Explanation opens after your attempt
Correct Answer

A. क्योंकि बाहरी दाब कम होता हैBecause external pressure is lower

Step 1

Concept

ऊँचाई पर वायुमंडलीय दाब कम होता है। / Atmospheric pressure is lower at high altitude.

Step 2

Why this answer is correct

जल का वाष्प दाब कम ताप पर ही उस कम बाहरी दाब के बराबर हो जाता है। / The vapour pressure of water becomes equal to this lower external pressure at a lower temperature.

Step 3

Exam Tip

ऊँचाई और कम क्वथनांक का कारण कम बाहरी दाब है। / High altitude lowers boiling point because external pressure is low.

Open Question Page
Ask Friends

किस परिस्थिति में किसी द्रव का वाष्प दाब सबसे अधिक होने की संभावना है?

In which condition is a liquid most likely to have the highest vapour pressure?

Explanation opens after your attempt
Correct Answer

A. उच्च तापमान और कमजोर अंतराअणुक आकर्षणHigh temperature and weak intermolecular attraction

Step 1

Concept

तापमान बढ़ने से अणुओं की ऊर्जा बढ़ती है। / Higher temperature increases molecular energy.

Step 2

Why this answer is correct

कमजोर आकर्षण अणुओं को वाष्प में जाने में मदद करता है। / Weak attraction helps molecules enter vapour phase.

Step 3

Exam Tip

अधिक वाष्प दाब के लिए उच्च ताप और कमजोर आकर्षण को साथ पहचानें। / For high vapour pressure, identify high temperature along with weak attraction.

Open Question Page
Ask Friends

आदर्श विलयन में घटक क और ख दोनों वाष्पशील हैं। यदि क का मोल अंश बढ़े, तो ख का आंशिक वाष्प दाब क्या होगा?

In an ideal solution, components A and B are both volatile. If the mole fraction of A increases, what happens to the partial vapour pressure of B?

Explanation opens after your attempt
Correct Answer

A. घटेगाIt decreases

Step 1

Concept

दो घटकों वाले विलयन में एक का मोल अंश बढ़ने पर दूसरे का मोल अंश घटता है। / In a binary solution, if mole fraction of one component increases, that of the other decreases.

Step 2

Why this answer is correct

आंशिक वाष्प दाब अपने घटक के मोल अंश के समानुपाती होता है। / Partial vapour pressure is proportional to the mole fraction of that component.

Step 3

Exam Tip

इसलिए ख का मोल अंश घटने पर उसका आंशिक वाष्प दाब घटेगा। / Therefore, partial vapour pressure of B decreases.

Open Question Page
Ask Friends

एक वाष्पशील घटक का शुद्ध वाष्प दाब (120) किलोपास्कल और विलयन में उसका मोल अंश (0.25) है। उसका आंशिक वाष्प दाब कितना होगा?

A volatile component has pure vapour pressure (120) kilopascal and its mole fraction in solution is (0.25). What is its partial vapour pressure?

Explanation opens after your attempt
Correct Answer

A. (30) किलोपास्कल(30) kilopascal

Step 1

Concept

आंशिक वाष्प दाब के लिए मोल अंश को शुद्ध वाष्प दाब से गुणा करें। / For partial vapour pressure, multiply mole fraction by pure vapour pressure.

Step 2

Why this answer is correct

\(0.25 \times 120 = 30\) किलोपास्कल। / \(0.25 \times 120 = 30\) kilopascal.

Step 3

Exam Tip

एक चौथाई मोल अंश होने पर दाब भी शुद्ध दाब का एक चौथाई होगा। / If mole fraction is one-fourth, the pressure is also one-fourth of the pure vapour pressure.

Open Question Page
Ask Friends

यदि किसी विलयन में विलेय अवाष्पशील है, तो कुल वाष्प दाब मुख्यतः किससे आता है?

If the solute in a solution is non-volatile, from where does the total vapour pressure mainly come?

Explanation opens after your attempt
Correct Answer

A. केवल वाष्पशील विलायक सेOnly from the volatile solvent

Step 1

Concept

अवाष्पशील विलेय वाष्प अवस्था में नहीं जाता। / A non-volatile solute does not enter the vapour phase.

Step 2

Why this answer is correct

वाष्प दाब वही घटक देता है जो वाष्प बन सकता है। / Vapour pressure is contributed by the component that can form vapour.

Step 3

Exam Tip

इसलिए ऐसे विलयन में वाष्प दाब मुख्यतः वाष्पशील विलायक से आता है। / Therefore, in such a solution, vapour pressure mainly comes from the volatile solvent.

Open Question Page
Ask Friends

समान ताप पर दो द्रवों में से एक जल्दी वाष्पित होता है। उस द्रव के बारे में सही निष्कर्ष क्या है?

At the same temperature, one of two liquids evaporates faster. What is the correct conclusion about that liquid?

Explanation opens after your attempt
Correct Answer

A. उसका वाष्प दाब अधिक हैIts vapour pressure is higher

Step 1

Concept

तेजी से वाष्पित होना अधिक वाष्प बनने की प्रवृत्ति दिखाता है। / Faster evaporation shows a greater tendency to form vapour.

Step 2

Why this answer is correct

अधिक वाष्प बनने की प्रवृत्ति अधिक वाष्प दाब से जुड़ी होती है। / Greater tendency to form vapour is linked with higher vapour pressure.

Step 3

Exam Tip

समान ताप पर तेजी से उड़ने वाला द्रव अधिक वाष्पशील माना जाता है। / At the same temperature, the faster evaporating liquid is more volatile.

Open Question Page
Ask Friends

वाष्प दाब का सही मापन खुले पात्र में क्यों कठिन है?

Why is correct measurement of vapour pressure difficult in an open vessel?

Explanation opens after your attempt
Correct Answer

A. क्योंकि द्रव और वाष्प के बीच संतुलन स्थिर नहीं बनताBecause stable equilibrium between liquid and vapour is not established

Step 1

Concept

वाष्प दाब संतुलन पर मापा जाता है। / Vapour pressure is measured at equilibrium.

Step 2

Why this answer is correct

खुले पात्र में बनी वाष्प बाहर निकल जाती है, इसलिए स्थिर संतुलन नहीं बनता। / In an open vessel, the formed vapour escapes, so stable equilibrium is not established.

Step 3

Exam Tip

वाष्प दाब के लिए बंद पात्र की शर्त याद रखें। / Remember the closed vessel condition for vapour pressure.

Open Question Page
Ask Friends

प्रेशर कुकर में भोजन जल्दी पकने का वाष्प दाब से जुड़ा कारण क्या है?

What is the vapour pressure related reason for faster cooking in a pressure cooker?

Explanation opens after your attempt
Correct Answer

A. दाब बढ़ने से जल का क्वथनांक बढ़ जाता हैIncreased pressure raises the boiling point of water

Step 1

Concept

कुकर के अंदर दाब सामान्य वायुमंडलीय दाब से अधिक होता है। / Pressure inside a cooker is higher than normal atmospheric pressure.

Step 2

Why this answer is correct

जल को उबलने के लिए अधिक ताप चाहिए, इसलिए उबलता जल अधिक गरम होता है। / Water needs higher temperature to boil, so boiling water is hotter.

Step 3

Exam Tip

अधिक दाब पर अधिक क्वथनांक भोजन पकाने में मदद करता है। / Higher boiling point at higher pressure helps food cook faster.

Open Question Page
Ask Friends

यदि अवाष्पशील विलेय की मात्रा बढ़ाई जाए, तो विलायक के वाष्प दाब पर क्या प्रभाव पड़ेगा?

If the amount of non-volatile solute is increased, what will be the effect on the vapour pressure of the solvent?

Explanation opens after your attempt
Correct Answer

A. वाष्प दाब और घटेगाVapour pressure will decrease further

Step 1

Concept

अधिक विलेय मिलाने पर विलायक का मोल अंश और कम होता है। / Adding more solute further decreases the mole fraction of solvent.

Step 2

Why this answer is correct

कम विलायक अणु वाष्प अवस्था में जा पाते हैं, इसलिए वाष्प दाब और घटता है। / Fewer solvent molecules enter vapour phase, so vapour pressure decreases further.

Step 3

Exam Tip

अवाष्पशील विलेय की मात्रा बढ़े तो वाष्प दाब में कमी बढ़ती है। / More non-volatile solute means greater lowering of vapour pressure.

Open Question Page
Ask Friends

शुद्ध विलायक का वाष्प दाब (40) किलोपास्कल है। विलयन का वाष्प दाब (36) किलोपास्कल है। वाष्प दाब में कमी कितनी है?

The vapour pressure of pure solvent is (40) kilopascal. The vapour pressure of solution is (36) kilopascal. What is the lowering of vapour pressure?

Explanation opens after your attempt
Correct Answer

A. (4) किलोपास्कल(4) kilopascal

Step 1

Concept

कमी निकालने के लिए शुद्ध विलायक के वाष्प दाब से विलयन का वाष्प दाब घटाएँ। / To find lowering, subtract solution vapour pressure from pure solvent vapour pressure.

Step 2

Why this answer is correct

(40 - 36 = 4) किलोपास्कल। / (40 - 36 = 4) kilopascal.

Step 3

Exam Tip

कमी और आपेक्षिक कमी को अलग रखें। / Keep lowering and relative lowering separate.

Open Question Page
Ask Friends

किस विलयन में राउल्ट नियम के आदर्श पालन की अधिक संभावना होती है?

Which solution is more likely to follow Raoult's law ideally?

Explanation opens after your attempt
Correct Answer

A. जिसमें समान प्रकार के अणुओं के बीच आकर्षण लगभग समान होOne in which attractions between similar types of molecules are nearly the same

Step 1

Concept

आदर्श विलयन में अलग-अलग अणुओं के बीच आकर्षण लगभग मूल घटकों जैसा होता है। / In an ideal solution, attractions between unlike molecules are nearly similar to those in pure components.

Step 2

Why this answer is correct

ऐसे में वाष्प दाब राउल्ट नियम के अनुसार चलता है। / Then vapour pressure follows Raoult's law.

Step 3

Exam Tip

आदर्शता पहचानते समय अणुओं के बीच आकर्षण की समानता देखें। / To identify ideality, look for similarity in intermolecular attractions.

Open Question Page
Ask Friends

यदि कोई विलयन राउल्ट नियम से धनात्मक विचलन दिखाता है, तो उसका वाष्प दाब आदर्श मान की तुलना में कैसा होगा?

If a solution shows positive deviation from Raoult's law, how will its vapour pressure compare with the ideal value?

Explanation opens after your attempt
Correct Answer

A. अधिकHigher

Step 1

Concept

धनात्मक विचलन में घटकों के बीच आकर्षण अपेक्षाकृत कमजोर होता है। / In positive deviation, attraction between components is comparatively weaker.

Step 2

Why this answer is correct

अणु आसानी से वाष्प में जाते हैं, इसलिए वास्तविक वाष्प दाब आदर्श मान से अधिक होता है। / Molecules escape more easily, so actual vapour pressure is higher than the ideal value.

Step 3

Exam Tip

धनात्मक विचलन को अधिक वाष्प दाब से जोड़ें। / Connect positive deviation with higher vapour pressure.

Open Question Page
Ask Friends

यदि कोई विलयन राउल्ट नियम से ऋणात्मक विचलन दिखाता है, तो अणुओं के बीच आकर्षण के बारे में क्या कहा जा सकता है?

If a solution shows negative deviation from Raoult's law, what can be said about the attraction between molecules?

Explanation opens after your attempt
Correct Answer

A. भिन्न अणुओं के बीच आकर्षण अधिक मजबूत होता हैAttraction between unlike molecules is stronger

Step 1

Concept

ऋणात्मक विचलन में वास्तविक वाष्प दाब आदर्श मान से कम होता है। / In negative deviation, actual vapour pressure is lower than the ideal value.

Step 2

Why this answer is correct

इसका कारण भिन्न अणुओं के बीच मजबूत आकर्षण होता है, जिससे अणु कम वाष्प बनते हैं। / This occurs due to stronger attraction between unlike molecules, so fewer molecules form vapour.

Step 3

Exam Tip

ऋणात्मक विचलन को मजबूत आकर्षण और कम वाष्प दाब से जोड़ें। / Link negative deviation with stronger attraction and lower vapour pressure.

Open Question Page
Ask Friends

किसी विलयन में विलेय का मोल अंश (0.2) है। पतले विलयन के लिए वाष्प दाब की आपेक्षिक कमी लगभग कितनी होगी?

In a solution, the mole fraction of solute is (0.2). For a dilute solution, what will be the approximate relative lowering of vapour pressure?

Explanation opens after your attempt
Correct Answer

A. (0.2)

Step 1

Concept

अवाष्पशील विलेय वाले पतले विलयन में आपेक्षिक कमी विलेय के मोल अंश के बराबर होती है। / For a dilute solution with non-volatile solute, relative lowering equals mole fraction of solute.

Step 2

Why this answer is correct

यहाँ विलेय का मोल अंश (0.2) है, इसलिए आपेक्षिक कमी (0.2) होगी। / Here solute mole fraction is (0.2), so relative lowering is (0.2).

Step 3

Exam Tip

विलेय के मोल अंश को सीधे उत्तर के रूप में पहचानें। / Identify solute mole fraction directly in such questions.

Open Question Page
Ask Friends

एक ही ताप पर शुद्ध जल और नमक के पतले जल विलयन में किसका वाष्प दाब अधिक होगा?

At the same temperature, which will have higher vapour pressure: pure water or a dilute salt solution in water?

Explanation opens after your attempt
Correct Answer

A. शुद्ध जलPure water

Step 1

Concept

नमक जल में अवाष्पशील विलेय की तरह जल का वाष्प दाब घटाता है। / Salt acts as a non-volatile solute in water and lowers vapour pressure.

Step 2

Why this answer is correct

शुद्ध जल में सतह पर जल अणुओं का अनुपात अधिक होता है। / In pure water, the fraction of water molecules at the surface is higher.

Step 3

Exam Tip

समान ताप पर शुद्ध जल का वाष्प दाब अधिक होगा। / At the same temperature, pure water has higher vapour pressure.

Open Question Page
Ask Friends

यदि विलायक का मोल अंश (0.6) है, तो अवाष्पशील विलेय वाले विलयन में विलेय का मोल अंश कितना होगा?

If the mole fraction of solvent is (0.6), what is the mole fraction of solute in a solution containing a non-volatile solute?

Explanation opens after your attempt
Correct Answer

A. (0.4)

Step 1

Concept

दो घटकों वाले विलयन में मोल अंशों का योग (1) होता है। / In a binary solution, the sum of mole fractions is (1).

Step 2

Why this answer is correct

विलेय का मोल अंश (1 - 0.6 = 0.4) होगा। / Mole fraction of solute is (1 - 0.6 = 0.4).

Step 3

Exam Tip

वाष्प दाब के प्रश्नों में मोल अंशों का योग पहले जाँचें। / In vapour pressure problems, first check the sum of mole fractions.

Open Question Page
Ask Friends

एक विलयन का वाष्प दाब शुद्ध विलायक से (15) प्रतिशत कम है। पतले विलयन में विलेय का मोल अंश लगभग कितना होगा?

A solution has vapour pressure (15) percent lower than the pure solvent. In a dilute solution, what is the approximate mole fraction of solute?

Explanation opens after your attempt
Correct Answer

A. (0.15)

Step 1

Concept

(15) प्रतिशत कमी का अर्थ आपेक्षिक कमी (0.15) है। / (15) percent lowering means relative lowering (0.15).

Step 2

Why this answer is correct

पतले विलयन में आपेक्षिक कमी विलेय के मोल अंश के बराबर मानी जाती है। / In a dilute solution, relative lowering is taken equal to solute mole fraction.

Step 3

Exam Tip

प्रतिशत को पहले दशमलव में बदलें। / Convert percentage into decimal first.

Open Question Page
Ask Friends

वाष्प दाब और क्वथनांक के संबंध में सही कथन कौन सा है?

Which statement is correct about the relation between vapour pressure and boiling point?

Explanation opens after your attempt
Correct Answer

A. अधिक वाष्प दाब वाला द्रव सामान्यतः कम क्वथनांक रखता हैA liquid with higher vapour pressure generally has lower boiling point

Step 1

Concept

अधिक वाष्प दाब का अर्थ है अणु आसानी से वाष्प बनते हैं। / Higher vapour pressure means molecules form vapour more easily.

Step 2

Why this answer is correct

ऐसे द्रव को बाहरी दाब के बराबर वाष्प दाब पाने के लिए कम ताप चाहिए। / Such a liquid needs lower temperature to reach vapour pressure equal to external pressure.

Step 3

Exam Tip

अधिक वाष्प दाब और कम क्वथनांक का संबंध याद रखें। / Remember higher vapour pressure with lower boiling point.

Open Question Page
Ask Friends

एक आदर्श द्विघटकीय विलयन में घटक क का मोल अंश (0.3) है। घटक ख का मोल अंश कितना होगा?

In an ideal binary solution, mole fraction of component A is (0.3). What will be the mole fraction of component B?

Explanation opens after your attempt
Correct Answer

A. (0.7)

Step 1

Concept

द्विघटकीय विलयन में दोनों मोल अंशों का योग (1) होता है। / In a binary solution, the sum of both mole fractions is (1).

Step 2

Why this answer is correct

घटक ख का मोल अंश (1 - 0.3 = 0.7) होगा। / Mole fraction of component B is (1 - 0.3 = 0.7).

Step 3

Exam Tip

राउल्ट नियम लगाने से पहले दोनों मोल अंश सही निकालें। / Before applying Raoult's law, calculate both mole fractions correctly.

Open Question Page
Ask Friends

घटक क और ख के शुद्ध वाष्प दाब क्रमशः (100) और (60) किलोपास्कल हैं। यदि दोनों के मोल अंश (0.5) हैं, तो आदर्श विलयन का कुल वाष्प दाब कितना होगा?

Pure vapour pressures of components A and B are (100) and (60) kilopascal respectively. If mole fractions of both are (0.5), what is the total vapour pressure of the ideal solution?

Explanation opens after your attempt
Correct Answer

A. (80) किलोपास्कल(80) kilopascal

Step 1

Concept

घटक क का आंशिक दाब \(0.5 \times 100 = 50\) किलोपास्कल होगा। / Partial pressure of A is \(0.5 \times 100 = 50\) kilopascal.

Step 2

Why this answer is correct

घटक ख का आंशिक दाब \(0.5 \times 60 = 30\) किलोपास्कल होगा। / Partial pressure of B is \(0.5 \times 60 = 30\) kilopascal.

Step 3

Exam Tip

कुल दाब (50 + 30 = 80) किलोपास्कल होगा। / Total pressure is (50 + 30 = 80) kilopascal.

Open Question Page
Ask Friends

वाष्प दाब के ताप पर निर्भर होने का मुख्य कारण क्या है?

What is the main reason vapour pressure depends on temperature?

Explanation opens after your attempt
Correct Answer

A. ताप बढ़ने पर अणुओं की गतिज ऊर्जा बढ़ती हैMolecular kinetic energy increases with temperature

Step 1

Concept

तापमान अणुओं की औसत गतिज ऊर्जा से जुड़ा है। / Temperature is related to the average kinetic energy of molecules.

Step 2

Why this answer is correct

अधिक ऊर्जा वाले अणु द्रव से निकलकर वाष्प बनते हैं। / Molecules with more energy escape from liquid and form vapour.

Step 3

Exam Tip

ताप बढ़ने पर वाष्प दाब बढ़ने का कारण अणुओं की ऊर्जा है। / The rise of vapour pressure with temperature is due to increased molecular energy.

Open Question Page
Ask Friends

समान ताप पर किस द्रव का वाष्प दाब कम होगा?

At the same temperature, which liquid will have lower vapour pressure?

Explanation opens after your attempt
Correct Answer

A. जिसमें अंतराअणुक आकर्षण मजबूत होThe one with strong intermolecular attraction

Step 1

Concept

मजबूत आकर्षण अणुओं को द्रव में रोकता है। / Strong attraction holds molecules in the liquid.

Step 2

Why this answer is correct

कम अणु वाष्प अवस्था में जाते हैं, इसलिए वाष्प दाब कम रहता है। / Fewer molecules enter the vapour phase, so vapour pressure remains low.

Step 3

Exam Tip

कम वाष्प दाब को मजबूत आकर्षण और कम वाष्पशीलता से जोड़ें। / Link low vapour pressure with strong attraction and low volatility.

Open Question Page
Ask Friends

जब वाष्पन और संघनन की दर बराबर हो जाती है, तब बंद पात्र में क्या स्थापित होता है?

When the rates of evaporation and condensation become equal, what is established in a closed vessel?

Explanation opens after your attempt
Correct Answer

A. गतिशील संतुलनDynamic equilibrium

Step 1

Concept

बंद पात्र में वाष्पन और संघनन दोनों चलते रहते हैं। / In a closed vessel, evaporation and condensation continue.

Step 2

Why this answer is correct

जब दोनों दरें बराबर होती हैं, तो द्रव और वाष्प में गतिशील संतुलन बनता है। / When both rates become equal, dynamic equilibrium is established between liquid and vapour.

Step 3

Exam Tip

संतुलन का अर्थ प्रक्रिया का रुकना नहीं, दरों का बराबर होना है। / Equilibrium does not mean stopping; it means equal rates.

Open Question Page
Ask Friends

किस स्थिति में द्रव का सामान्य क्वथनांक कहा जाता है?

In which condition is the normal boiling point of a liquid defined?

Explanation opens after your attempt
Correct Answer

A. जब उसका वाष्प दाब एक वायुमंडल दाब के बराबर होWhen its vapour pressure equals one atmosphere pressure

Step 1

Concept

क्वथनांक वह ताप है जहाँ वाष्प दाब बाहरी दाब के बराबर होता है। / Boiling point is the temperature at which vapour pressure equals external pressure.

Step 2

Why this answer is correct

सामान्य क्वथनांक के लिए बाहरी दाब एक वायुमंडल माना जाता है। / For normal boiling point, external pressure is taken as one atmosphere.

Step 3

Exam Tip

सामान्य क्वथनांक में एक वायुमंडल दाब की शर्त याद रखें। / Remember the one atmosphere condition for normal boiling point.

Open Question Page
Ask Friends

किसी विलयन में वाष्प दाब की कमी (5) किलोपास्कल है और शुद्ध विलायक का वाष्प दाब (50) किलोपास्कल है। आपेक्षिक कमी कितनी होगी?

In a solution, lowering of vapour pressure is (5) kilopascal and vapour pressure of pure solvent is (50) kilopascal. What is the relative lowering?

Explanation opens after your attempt
Correct Answer

A. (0.10)

Step 1

Concept

आपेक्षिक कमी में वाष्प दाब की कमी को शुद्ध विलायक के वाष्प दाब से भाग देते हैं। / In relative lowering, lowering of vapour pressure is divided by vapour pressure of pure solvent.

Step 2

Why this answer is correct

\(5 \div 50 = 0.10\)। / \(5 \div 50 = 0.10\).

Step 3

Exam Tip

आपेक्षिक मान का कोई मात्रक नहीं होता। / A relative value has no unit.

Open Question Page
Ask Friends

विलयन का वाष्प दाब शुद्ध विलायक से कम है। इससे कौन सा प्रभाव सीधे जुड़ा है?

The vapour pressure of a solution is lower than that of the pure solvent. Which effect is directly connected with this?

Explanation opens after your attempt
Correct Answer

A. क्वथनांक में वृद्धिElevation in boiling point

Step 1

Concept

अवाष्पशील विलेय वाष्प दाब घटाता है। / A non-volatile solute lowers vapour pressure.

Step 2

Why this answer is correct

उबलने के लिए वाष्प दाब को बाहरी दाब के बराबर होना पड़ता है, इसलिए अधिक ताप चाहिए। / To boil, vapour pressure must equal external pressure, so a higher temperature is required.

Step 3

Exam Tip

वाष्प दाब में कमी को क्वथनांक वृद्धि से जोड़ें। / Link lowering of vapour pressure with elevation of boiling point.

Open Question Page
Ask Friends

यदि कोई द्रव कम ताप पर ही बाहरी दाब के बराबर वाष्प दाब प्राप्त कर लेता है, तो उसका क्वथनांक कैसा होगा?

If a liquid attains vapour pressure equal to external pressure at a lower temperature, how will its boiling point be?

Explanation opens after your attempt
Correct Answer

A. कमLow

Step 1

Concept

क्वथनांक वही ताप है जहाँ वाष्प दाब बाहरी दाब के बराबर होता है। / Boiling point is the temperature at which vapour pressure equals external pressure.

Step 2

Why this answer is correct

यदि यह बराबरी कम ताप पर हो रही है, तो क्वथनांक कम होगा। / If this equality is reached at lower temperature, boiling point is low.

Step 3

Exam Tip

क्वथनांक की परिभाषा को सीधे लागू करें। / Apply the definition of boiling point directly.

Open Question Page
Ask Friends

एक आदर्श विलयन में घटक क का आंशिक वाष्प दाब (40) किलोपास्कल और घटक ख का आंशिक वाष्प दाब (25) किलोपास्कल है। कुल वाष्प दाब कितना होगा?

In an ideal solution, partial vapour pressure of component A is (40) kilopascal and that of component B is (25) kilopascal. What is the total vapour pressure?

Explanation opens after your attempt
Correct Answer

A. (65) किलोपास्कल(65) kilopascal

Step 1

Concept

कुल वाष्प दाब सभी वाष्पशील घटकों के आंशिक दाबों का योग होता है। / Total vapour pressure is the sum of partial pressures of all volatile components.

Step 2

Why this answer is correct

(40 + 25 = 65) किलोपास्कल। / (40 + 25 = 65) kilopascal.

Step 3

Exam Tip

कुल दाब निकालते समय आंशिक दाबों को जोड़ें, घटाएँ नहीं। / Add partial pressures to get total pressure; do not subtract them.

Open Question Page
Ask Friends

वाष्प दाब में कमी का सही क्रम किस आधार पर तय होगा?

On what basis is the order of lowering of vapour pressure decided?

Explanation opens after your attempt
Correct Answer

A. विलेय कणों की प्रभावी संख्या के आधार परOn the basis of effective number of solute particles

Step 1

Concept

वाष्प दाब में कमी सांख्यिक गुण है। / Lowering of vapour pressure is a colligative property.

Step 2

Why this answer is correct

इसका मान विलेय कणों की प्रभावी संख्या पर निर्भर करता है। / Its value depends on the effective number of solute particles.

Step 3

Exam Tip

क्रम तय करते समय कणों की संख्या और मोल अंश देखें। / To decide the order, check particle number and mole fraction.

Open Question Page
Ask Friends

यदि किसी विलयन में अवाष्पशील विलेय मिलाने पर वाष्प दाब बहुत कम घटता है, तो विलेय की मात्रा के बारे में क्या अनुमान लगाया जा सकता है?

If adding a non-volatile solute causes only a small lowering of vapour pressure, what can be inferred about the amount of solute?

Explanation opens after your attempt
Correct Answer

A. विलेय की मात्रा कम हैThe amount of solute is small

Step 1

Concept

वाष्प दाब में कमी विलेय कणों की संख्या पर निर्भर करती है। / Lowering of vapour pressure depends on the number of solute particles.

Step 2

Why this answer is correct

कम कमी होने का अर्थ है विलेय कणों का प्रभाव कम है। / Small lowering means the effect of solute particles is small.

Step 3

Exam Tip

छोटी कमी को कम विलेय मात्रा से जोड़ें। / Connect small lowering with a small amount of solute.

Open Question Page
Ask Friends

दो द्रवों में से किसके वाष्प दाब का ताप के साथ बढ़ना अधिक स्पष्ट दिख सकता है?

For which of two liquids may the increase in vapour pressure with temperature appear more noticeable?

Explanation opens after your attempt
Correct Answer

A. जिसके अणु ताप बढ़ने पर आसानी से वाष्प बनते होंThe one whose molecules vaporize easily on heating

Step 1

Concept

ताप बढ़ने पर अणुओं की ऊर्जा बढ़ती है। / Heating increases molecular energy.

Step 2

Why this answer is correct

जिन अणुओं में वाष्प बनने की प्रवृत्ति अधिक है, उनमें वाष्प दाब का बढ़ना स्पष्ट दिखता है। / Liquids whose molecules vaporize easily show a clear rise in vapour pressure.

Step 3

Exam Tip

ताप प्रभाव को अणुओं की ऊर्जा और वाष्पशीलता से जोड़ें। / Relate temperature effect with molecular energy and volatility.

Open Question Page
Ask Friends

राउल्ट नियम के अनुसार (x = 1) होने पर (p) का मान क्या होगा?

According to Raoult's law, what will be the value of (p) when (x = 1)?

Explanation opens after your attempt
Correct Answer

A. \(p^\circ\)

Step 1

Concept

राउल्ट नियम में \(p = x p^\circ\) होता है। / Raoult's law is \(p = x p^\circ\).

Step 2

Why this answer is correct

(x = 1) रखने पर \(p = p^\circ\) मिलेगा। / Putting (x = 1), we get \(p = p^\circ\).

Step 3

Exam Tip

शुद्ध विलायक के लिए मोल अंश (1) और वाष्प दाब \(p^\circ\) होता है। / For a pure solvent, mole fraction is (1) and vapour pressure is \(p^\circ\).

Open Question Page
Ask Friends

यदि किसी विलयन का वास्तविक वाष्प दाब राउल्ट नियम से अनुमानित दाब से कम है, तो यह किस प्रकार का विचलन है?

If the actual vapour pressure of a solution is lower than the pressure predicted by Raoult's law, what type of deviation is it?

Explanation opens after your attempt
Correct Answer

A. ऋणात्मक विचलनNegative deviation

Step 1

Concept

राउल्ट नियम आदर्श मान देता है। / Raoult's law gives the ideal value.

Step 2

Why this answer is correct

वास्तविक वाष्प दाब यदि आदर्श मान से कम है, तो इसे ऋणात्मक विचलन कहते हैं। / If actual vapour pressure is lower than the ideal value, it is called negative deviation.

Step 3

Exam Tip

कम वाष्प दाब को ऋणात्मक विचलन से जोड़कर याद करें। / Remember lower actual vapour pressure as negative deviation.

Open Question Page
Ask Friends

यदि किसी विलयन का वास्तविक वाष्प दाब राउल्ट नियम से अनुमानित दाब से अधिक है, तो उसका कारण क्या हो सकता है?

If the actual vapour pressure of a solution is higher than the value predicted by Raoult's law, what may be the reason?

Explanation opens after your attempt
Correct Answer

A. भिन्न अणुओं के बीच आकर्षण कमजोर होनाWeaker attraction between unlike molecules

Step 1

Concept

वास्तविक वाष्प दाब अधिक होने का अर्थ है अणु आसानी से वाष्प में जा रहे हैं। / Higher actual vapour pressure means molecules are escaping more easily.

Step 2

Why this answer is correct

ऐसा तब हो सकता है जब भिन्न अणुओं के बीच आकर्षण कमजोर हो। / This can happen when attraction between unlike molecules is weaker.

Step 3

Exam Tip

अधिक वास्तविक वाष्प दाब को धनात्मक विचलन से जोड़ें। / Link higher actual vapour pressure with positive deviation.

Open Question Page
Ask Friends

किसी अवाष्पशील विलेय वाले विलयन में विलायक का मोल अंश (0.85) है। यदि शुद्ध विलायक का वाष्प दाब (200) किलोपास्कल है, तो विलयन का वाष्प दाब कितना होगा?

In a solution containing a non-volatile solute, the mole fraction of solvent is (0.85). If the vapour pressure of pure solvent is (200) kilopascal, what is the vapour pressure of the solution?

Explanation opens after your attempt
Correct Answer

A. (170) किलोपास्कल(170) kilopascal

Step 1

Concept

अवाष्पशील विलेय होने पर वाष्प दाब विलायक के कारण माना जाएगा। / With a non-volatile solute, vapour pressure is due to the solvent.

Step 2

Why this answer is correct

राउल्ट नियम लगाएँ: \(0.85 \times 200 = 170\) किलोपास्कल। / Apply Raoult's law: \(0.85 \times 200 = 170\) kilopascal.

Step 3

Exam Tip

उत्तर शुद्ध विलायक के वाष्प दाब से कम होना चाहिए। / The answer should be lower than the vapour pressure of the pure solvent.

Open Question Page
Ask Friends

एक बंद पात्र में द्रव और उसकी वाष्प संतुलन पर हैं। तापमान अचानक बढ़ाने पर नया संतुलन बनने से पहले वाष्पन की दर पर क्या प्रभाव पड़ेगा?

A liquid and its vapour are at equilibrium in a closed vessel. If temperature is suddenly increased, what happens to the rate of evaporation before a new equilibrium is reached?

Explanation opens after your attempt
Correct Answer

A. वह बढ़ेगीIt will increase

Step 1

Concept

ताप बढ़ाने से द्रव अणुओं की ऊर्जा बढ़ती है। / Increasing temperature increases the energy of liquid molecules.

Step 2

Why this answer is correct

अधिक अणु सतह छोड़ने लगते हैं, इसलिए वाष्पन की दर बढ़ती है। / More molecules leave the surface, so the rate of evaporation increases.

Step 3

Exam Tip

ताप परिवर्तन पर पहले अणुओं की ऊर्जा पर विचार करें। / For temperature changes, first think about molecular energy.

Open Question Page
Ask Friends

वाष्प दाब में कमी को मापते समय शुद्ध विलायक का वाष्प दाब क्यों जरूरी होता है?

Why is the vapour pressure of pure solvent needed while measuring lowering of vapour pressure?

Explanation opens after your attempt
Correct Answer

A. क्योंकि कमी शुद्ध विलायक और विलयन के वाष्प दाब के अंतर से मिलती हैBecause lowering is obtained from the difference between vapour pressure of pure solvent and solution

Step 1

Concept

वाष्प दाब में कमी तुलना से निकाली जाती है। / Lowering of vapour pressure is obtained by comparison.

Step 2

Why this answer is correct

इसके लिए शुद्ध विलायक का वाष्प दाब और विलयन का वाष्प दाब दोनों चाहिए। / We need both pure solvent vapour pressure and solution vapour pressure.

Step 3

Exam Tip

कमी निकालते समय पहले दोनों दाबों का अंतर लें। / To calculate lowering, first take the difference of the two pressures.

Open Question Page
Ask Friends

यदि विलयन में दो वाष्पशील द्रव हैं और एक का शुद्ध वाष्प दाब बहुत अधिक है, तो कुल वाष्प दाब पर उसका प्रभाव कैसा होगा?

If a solution contains two volatile liquids and one has a very high pure vapour pressure, how will it affect the total vapour pressure?

Explanation opens after your attempt
Correct Answer

A. उसका आंशिक दाब अधिक हो सकता है और कुल दाब बढ़ा सकता हैIts partial pressure can be high and may increase total pressure

Step 1

Concept

वाष्पशील घटक अपने मोल अंश और शुद्ध वाष्प दाब के अनुसार आंशिक दाब देता है। / A volatile component gives partial pressure according to its mole fraction and pure vapour pressure.

Step 2

Why this answer is correct

शुद्ध वाष्प दाब अधिक हो तो उसका आंशिक दाब भी अधिक हो सकता है। / If pure vapour pressure is high, its partial pressure can also be high.

Step 3

Exam Tip

कुल दाब आंशिक दाबों का योग होता है, इसलिए प्रभाव कुल दाब पर दिखता है। / Total pressure is the sum of partial pressures, so the effect appears in total pressure.

Open Question Page
Ask Friends

अवाष्पशील विलेय मिलाने पर विलयन का क्वथनांक क्यों बढ़ता है?

Why does the boiling point of a solution increase when a non-volatile solute is added?

Explanation opens after your attempt
Correct Answer

A. क्योंकि वाष्प दाब घटता है और बाहरी दाब तक पहुँचने के लिए अधिक ताप चाहिएBecause vapour pressure decreases and higher temperature is needed to reach external pressure

Step 1

Concept

अवाष्पशील विलेय विलायक का वाष्प दाब घटाता है। / A non-volatile solute lowers the vapour pressure of the solvent.

Step 2

Why this answer is correct

उबलने के लिए वाष्प दाब को बाहरी दाब के बराबर होना होता है। / For boiling, vapour pressure must become equal to external pressure.

Step 3

Exam Tip

घटे हुए वाष्प दाब को बराबरी तक पहुँचाने के लिए अधिक ताप चाहिए, इसलिए क्वथनांक बढ़ता है। / More temperature is required to reach that value, so boiling point increases.

Open Question Page
Ask Friends

वाष्प दाब से जुड़े संख्यात्मक प्रश्नों में सबसे पहले कौन सी जाँच करनी चाहिए?

In numerical questions related to vapour pressure, what should be checked first?

Explanation opens after your attempt
Correct Answer

A. कौन सा घटक वाष्पशील है और उसका मोल अंश क्या हैWhich component is volatile and what its mole fraction is

Step 1

Concept

वाष्प दाब में योगदान वाष्पशील घटक देते हैं। / Volatile components contribute to vapour pressure.

Step 2

Why this answer is correct

राउल्ट नियम लगाने के लिए उस घटक का मोल अंश जानना जरूरी है। / To apply Raoult's law, the mole fraction of that component is needed.

Step 3

Exam Tip

गणना शुरू करने से पहले वाष्पशील घटक और मोल अंश पहचानें। / Before calculation, identify the volatile component and its mole fraction.

Open Question Page
Ask Friends
FAQs

Class 12 Chemistry Quiz FAQs

How many questions are in this quiz?

This level is designed for 50 active questions. Currently 50 questions are available for the selected class and difficulty.

Is there a timer in this quiz?

Yes, the timer uses 35 seconds per question for Medium difficulty and shows the total remaining time on the page.

Can I open each question separately?

Yes, every question has its own SEO-friendly page with answer, explanation and related practice links.