Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects
Topic Wise MCQ

Chemistry 5: Colligative Properties MCQ Questions for Class 12 General

Practice focused topic-wise MCQs with answers and explanations for quick revision and exam preparation.

Share

Start 5: Colligative Properties Topic Quiz

Difficulty select karke sirf is topic ke focused MCQs practice karein. Score, timer aur explanations student-friendly flow me milenge.

Topic Navigation

Continue Chapter Revision

5: Colligative Properties Practice Questions

Showing 571-580 of 596 questions.

Search

किसी विलयन का परासरण दाब मापते समय ताप बढ़ा दिया जाए और सांद्रता समान रहे, तो परासरण दाब पर क्या प्रभाव पड़ेगा?

If temperature is increased while measuring osmotic pressure and concentration remains the same, what happens to the osmotic pressure?

Explanation opens after your attempt
Correct Answer

B. बढ़ेगाIt increases

Step 1

Concept

परासरण दाब \(\pi=CRT\) या \(\pi=iCRT\) से दिया जाता है। / Osmotic pressure is given by \(\pi=CRT\) or \(\pi=iCRT\).

Step 2

Why this answer is correct

सांद्रता समान होने पर \(\pi\) ताप के सीधे समानुपाती है। / At constant concentration, \(\pi\) is directly proportional to temperature.

Step 3

Exam Tip

ताप से जुड़े प्रश्नों में (T) को परम ताप मानकर सोचें। / In temperature-based questions, think of (T) as absolute temperature.

Open Question Page
Ask Friends

किसी अविद्युत् विलेय के (0.2,m) विलयन का \(\Delta T_b\) (0.102,K) है। उसी विलायक में (0.1,m) पूर्ण वियोजित (NaCl) विलयन का \(\Delta T_b\) लगभग कितना होगा?

A (0.2,m) solution of a nonelectrolyte has \(\Delta T_b=0.102,K\). In the same solvent, what will be the approximate \(\Delta T_b\) of a (0.1,m) completely dissociated (NaCl) solution?

Explanation opens after your attempt
Correct Answer

B. (0.102,K)

Step 1

Concept

पहले विलयन के लिए प्रभावी मोललता (0.2) है। / For the first solution, effective molality is (0.2).

Step 2

Why this answer is correct

पूर्ण वियोजित (NaCl) में \(i=2\), इसलिए प्रभावी मोललता \(2\times0.1=0.2\) है। / For completely dissociated (NaCl), \(i=2\), so effective molality is \(2\times0.1=0.2\).

Step 3

Exam Tip

समान विलायक में समान प्रभावी मोललता समान उन्नयन देती है। / In the same solvent, equal effective molality gives equal elevation.

Open Question Page
Ask Friends

निम्न में से कौन-सा विलयन सबसे कम हिमांक रखेगा, यदि सभी की मोललता (0.1,m) है और वियोजन पूर्ण है?

Which solution will have the lowest freezing point if all have molality (0.1,m) and dissociation is complete?

Explanation opens after your attempt
Correct Answer

D. (K_4[Fe(CN)*6])

Step 1

Concept

सबसे कम हिमांक का अर्थ सबसे अधिक हिमांक अवनमन है। / Lowest freezing point means greatest depression in freezing point.

Step 2

Why this answer is correct

(K_4[Fe(CN)*6]) पूर्ण वियोजन पर (5) आयन देता है, इसलिए उसका (i) सबसे अधिक होगा। / (K_4[Fe(CN)*6]) gives (5) ions on complete dissociation, so its (i) is highest.

Step 3

Exam Tip

सबसे अधिक आयन देने वाला समान मोलल विलयन सबसे कम हिमांक दिखाता है। / At equal molality, the solution producing the most ions shows the lowest freezing point.

Open Question Page
Ask Friends

किसी विलयन में विलेय का प्रेक्षित मोलर द्रव्यमान सामान्य मान का आधा है। इसका (i) क्या होगा?

In a solution, the observed molar mass of a solute is half of its normal value. What is its (i)?

Explanation opens after your attempt
Correct Answer

C. (2)

Step 1

Concept

संबंध \(i=\frac{M*{\text{normal}}}{M*{\text{observed}}}\) है। / The relation is \(i=\frac{M*{\text{normal}}}{M*{\text{observed}}}\).

Step 2

Why this answer is correct

प्रेक्षित मोलर द्रव्यमान आधा है, इसलिए \(i=\frac{M}{M/2}=2\)। / Observed molar mass is half, so \(i=\frac{M}{M/2}=2\).

Step 3

Exam Tip

कम प्रेक्षित मोलर द्रव्यमान सामान्यतः वियोजन का संकेत देता है। / A lower observed molar mass usually indicates dissociation.

Open Question Page
Ask Friends

यदि किसी विलयन का हिमांक (271.9,K) है और शुद्ध विलायक का हिमांक (273.0,K) है, तो हिमांक अवनमन कितना है?

If the freezing point of a solution is (271.9,K) and that of the pure solvent is (273.0,K), what is the depression in freezing point?

Explanation opens after your attempt
Correct Answer

A. (1.1,K)

Step 1

Concept

हिमांक अवनमन शुद्ध विलायक और विलयन के हिमांक का अंतर है। / Depression in freezing point is the difference between the freezing point of pure solvent and solution.

Step 2

Why this answer is correct

\(\Delta T_f=273.0-271.9=1.1,K\)। / \(\Delta T_f=273.0-271.9=1.1,K\).

Step 3

Exam Tip

हमेशा बड़ा ताप छोटे ताप से घटाएं, क्योंकि अवनमन धनात्मक लिया जाता है। / Always subtract the lower solution temperature from the pure solvent temperature because depression is taken positive.

Open Question Page
Ask Friends

किसी विलयन में (NaCl) का (75%) वियोजन है। इस विलयन के लिए (i) कितना होगा?

A solution of (NaCl) is (75%) dissociated. What is (i) for this solution?

Explanation opens after your attempt
Correct Answer

C. (1.75)

Step 1

Concept

(NaCl) दो आयन देता है। / (NaCl) gives two ions.

Step 2

Why this answer is correct

\(i=1+\alpha(n-1)=1+0.75(2-1)=1.75\)। / \(i=1+\alpha(n-1)=1+0.75(2-1)=1.75\).

Step 3

Exam Tip

आंशिक वियोजन में (i) एक और कुल आयन संख्या के बीच रहता है। / In partial dissociation, (i) lies between one and the total number of ions.

Open Question Page
Ask Friends

एक अर्धपारगम्य झिल्ली के दोनों ओर दो विलयन रखे गए। बाईं ओर (0.2,M) ग्लूकोज और दाईं ओर (0.1,M) (NaCl) पूर्ण वियोजित है। जल का शुद्ध प्रवाह कैसा होगा?

Two solutions are placed across a semipermeable membrane. The left side has (0.2,M) glucose and the right side has (0.1,M) completely dissociated (NaCl). What will be the net flow of water?

Explanation opens after your attempt
Correct Answer

C. कोई शुद्ध प्रवाह नहींNo net flow

Step 1

Concept

प्रभावी सांद्रता (iC) से तुलना करें। / Compare effective concentration (iC).

Step 2

Why this answer is correct

ग्लूकोज के लिए \(iC=1\times0.2=0.2\), (NaCl) के लिए \(iC=2\times0.1=0.2\)। / For glucose \(iC=1\times0.2=0.2\), and for (NaCl), \(iC=2\times0.1=0.2\).

Step 3

Exam Tip

समान परासरण दाब होने पर जल का कोई शुद्ध प्रवाह नहीं होता। / When osmotic pressures are equal, there is no net flow of water.

Open Question Page
Ask Friends

यदि विलयन का वाष्प दाब शुद्ध विलायक से कम है, तो इसके पीछे मुख्य कारण क्या है?

If the vapour pressure of a solution is lower than that of the pure solvent, what is the main reason?

Explanation opens after your attempt
Correct Answer

A. विलायक अणुओं की सतह पर संख्या घट जाती हैNumber of solvent molecules at the surface decreases

Step 1

Concept

अवाष्पशील विलेय मिलाने पर सतह पर कुछ स्थान विलेय कण घेर लेते हैं। / When a non-volatile solute is added, some surface positions are occupied by solute particles.

Step 2

Why this answer is correct

इससे वाष्प में जाने वाले विलायक अणुओं की संख्या घटती है और वाष्प दाब कम होता है। / This reduces the number of solvent molecules escaping into vapour, so vapour pressure decreases.

Step 3

Exam Tip

वाष्प दाब अवनमन को सतह से निकलने वाले विलायक अणुओं से जोड़कर समझें। / Understand vapour pressure lowering through escaping solvent molecules at the surface.

Open Question Page
Ask Friends

निम्नलिखित में से किस कोलिगेटिव गुण का मान विलयन में विलेय कणों की संख्या बढ़ने पर घटता है?

Which of the following colligative properties decreases as the number of solute particles in a solution increases?

Explanation opens after your attempt
Correct Answer

D. विलायक का वाष्प दाब

Explanation

Simple Explanation

अवाष्पशील विलेय मिलाने पर सतह पर विलायक अणुओं का अंश घटता है, इसलिए विलायक का वाष्प दाब कम होता है। इसके विपरीत सापेक्ष वाष्प-दाब अवनमन, क्वथनांक वृद्धि और हिमांक अवनमन बढ़ते हैं। परीक्षा टिप: घटने वाला गुण स्वयं वाष्प दाब है, उसका अवनमन नहीं। / Adding a non-volatile solute lowers the mole fraction of solvent at the surface, so the solvent vapour pressure decreases. Relative lowering, boiling-point elevation and freezing-point depression increase. Exam tip: distinguish vapour pressure from its lowering.

Open Question Page
Ask Friends

किसी विलेय के (25%) अणु त्रि-अणुक संघ बनाते हैं। उसका वान्ट हॉफ गुणक कितना होगा?

If (25%) molecules of a solute form trimers, what will be its van't Hoff factor?

Explanation opens after your attempt
Correct Answer

C. (0.833)

Step 1

Concept

(75%) अणु अकेले रहेंगे और (25%) अणु त्रि-अणुक कण बनाएंगे। / (75%) molecules remain single and (25%) form trimers.

Step 2

Why this answer is correct

प्रभावी कण \(0.75+\frac{0.25}{3}=0.833\) होंगे, इसलिए \(i\approx0.833\)। / Effective particles \(=0.75+\frac{0.25}{3}=0.833\), so \(i\approx0.833\).

Step 3

Exam Tip

(n)-अणुक संघ में संघित भाग को (n) से भाग दें। / In (n)-mer association, divide the associated fraction by (n).

Open Question Page
Ask Friends