Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects

Class 12 Chemistry - Chapter 01: Solutions - 6: Molar Mass Determination Hard Quiz

Level 14 • 11/50 questions • 30 seconds per question.

Level readiness 11/50 Questions
Time Left 05:30 30 sec/question
RewardsCoins + XP
ModeClassic Quiz
Share
This level needs 39 more active questions. Admin panel me same class, subject, difficulty aur level_no 14 par question add karein.
Question 1 / 11 0 score
Answered 0/11 Correct 0 Time 05:30

यदि किसी विलेय का वास्तविक मोलर द्रव्यमान \(120,g,mol^{-1}\) है और अणुसंख्य गुण से प्राप्त प्रेक्षित मोलर द्रव्यमान \(80,g,mol^{-1}\) है, तो (i) का मान क्या होगा?

If the true molar mass of a solute is \(120,g,mol^{-1}\) and the observed molar mass from a colligative property is \(80,g,mol^{-1}\), what is the value of (i)?

Explanation opens after your attempt
Correct Answer

C. (1.5)

Step 1

Concept

\(प्रेक्षित मोलर द्रव्यमान (=\frac{\)वास्तविक मोलर द्रव्यमान}{i}) होता है। \(/ Observed molar mass (=\frac{\)true molar mass}{i}).

Step 2

Why this answer is correct

\(80=\frac{120}{i}\), इसलिए (i=1.5)। / \(80=\frac{120}{i}\), so (i=1.5).

Step 3

Exam Tip

प्रेक्षित द्रव्यमान वास्तविक से कम हो तो कणों की संख्या बढ़ी मानी जाती है। / If observed mass is lower than true mass, particle number has increased.

Open Question Page
Ask Friends

किसी अवियोजित विलेय के (3) ग्राम को (100) ग्राम विलायक में घोलने पर क्वथनांक में (0.156,K) की वृद्धि होती है। यदि \(K_b=0.52,K,kg,mol^{-1}\), तो विलेय का मोलर द्रव्यमान क्या होगा?

When (3) g of a non-dissociated solute is dissolved in (100) g of solvent, the boiling point rises by (0.156,K). If \(K_b=0.52,K,kg,mol^{-1}\), what is the molar mass of the solute?

Explanation opens after your attempt
Correct Answer

C. \(100,g,mol^{-1}\)

Step 1

Concept

\(\Delta T_b=K_bm\), इसलिए \(m=\frac{0.156}{0.52}=0.3\)। / \(\Delta T_b=K_bm\), so \(m=\frac{0.156}{0.52}=0.3\).

Step 2

Why this answer is correct

(100) ग्राम विलायक (0.1) किलोग्राम है, अतः विलेय के मोल \(0.3\times0.1=0.03\) हैं। / (100) g solvent is (0.1) kg, so solute moles \(=0.3\times0.1=0.03\).

Step 3

Exam Tip

मोलर द्रव्यमान \(=\frac{3}{0.03}=100,g,mol^{-1}\)। / Molar mass \(=\frac{3}{0.03}=100,g,mol^{-1}\).

Open Question Page
Ask Friends

समान ताप पर (0.2,M) ग्लूकोज विलयन के समपरासारी (NaCl) विलयन की मोलरता क्या होगी, यदि (NaCl) पूर्ण रूप से वियोजित हो?

At the same temperature, what molarity of (NaCl) solution will be isotonic with a (0.2,M) glucose solution, if (NaCl) dissociates completely?

Explanation opens after your attempt
Correct Answer

B. (0.10,M)

Step 1

Concept

समपरासारी विलयनों के परासरण दाब समान होते हैं। / Isotonic solutions have equal osmotic pressure.

Step 2

Why this answer is correct

ग्लूकोज के लिए (i=1), जबकि (NaCl) के लिए (i=2), इसलिए \(1\times0.2=2\times C\)। / For glucose (i=1), and for (NaCl) (i=2), so \(1\times0.2=2\times C\).

Step 3

Exam Tip

(C=0.10,M), अतः आयनिक विलेय की कम मोलरता भी समान प्रभाव दे सकती है। / (C=0.10,M); an ionic solute can give the same effect at lower molarity.

Open Question Page
Ask Friends

यदि (KCl) के लिए प्रेक्षित मोलर द्रव्यमान वास्तविक मोलर द्रव्यमान का \(\frac{2}{3}\) है, तो (i) का मान क्या होगा?

If the observed molar mass of (KCl) is \(\frac{2}{3}\) of its true molar mass, what is the value of (i)?

Explanation opens after your attempt
Correct Answer

C. (1.5)

Step 1

Concept

(M*{obs\(}=\frac{M*{\)true}}{i}) होता है। \(/ (M_{\)obs\(}=\frac{M_{\)true}}{i}).

Step 2

Why this answer is correct

यदि (M*{obs\(}=\frac{2}{3}M*{\)true}), तो \(i=\frac{3}{2}=1.5\)। \(/ If (M_{\)obs\(}=\frac{2}{3}M_{\)true\(}), then (i=\frac{3}{2}=1.5).\)

Step 3

Exam Tip

अनुपात वाले प्रश्नों में वास्तविक मान रखने की जरूरत नहीं होती। / In ratio questions, actual molar mass values are not needed.

Open Question Page
Ask Friends

परासरण दाब की सहायता से बड़े जैव अणुओं का मोलर द्रव्यमान निकालना अधिक उपयुक्त क्यों है?

Why is osmotic pressure more suitable for finding molar mass of large biomolecules?

Explanation opens after your attempt
Correct Answer

A. क्योंकि बहुत तनु विलयन में भी इसका मान मापने योग्य होता हैBecause it is measurable even in very dilute solutions

Step 1

Concept

बड़े जैव अणुओं के विलयन बहुत तनु बनाए जाते हैं। / Solutions of large biomolecules are made very dilute.

Step 2

Why this answer is correct

इतने तनु विलयनों में हिमांक या क्वथनांक परिवर्तन बहुत छोटा हो सकता है, पर परासरण दाब मापा जा सकता है। / In such dilute solutions, freezing or boiling point changes may be very small, but osmotic pressure can be measured.

Step 3

Exam Tip

बड़े मोलर द्रव्यमान वाले विलेयों के लिए परासरण विधि बेहतर याद रखें। / Remember osmotic method as better for high molar mass solutes.

Open Question Page
Ask Friends

एक विलयन \(25^\circ C\) पर (0.615,atm) परासरण दाब दिखाता है। यदि \(R=0.082,L,atm,mol^{-1},K^{-1}\), तो अवियोजित विलेय की मोलरता लगभग कितनी है?

A solution shows osmotic pressure (0.615,atm) at \(25^\circ C\). If \(R=0.082,L,atm,mol^{-1},K^{-1}\), what is the approximate molarity of the non-dissociated solute?

Explanation opens after your attempt
Correct Answer

A. (0.025,M)

Step 1

Concept

\(25^\circ C\) को (298,K) मानते हैं। / Take \(25^\circ C\) as (298,K).

Step 2

Why this answer is correct

\(\pi=CRT\), इसलिए \(C=\frac{0.615}{0.082\times298}\approx0.025,M\)। / From \(\pi=CRT\), \(C=\frac{0.615}{0.082\times298}\approx0.025,M\).

Step 3

Exam Tip

परासरण दाब में ताप को केल्विन में रखना जरूरी है। / Temperature must be in kelvin in osmotic pressure calculations.

Open Question Page
Ask Friends

निम्न में से कौन-सा युग्म समान ताप पर समान मोलरता होने पर सबसे अलग परासरण दाब देगा, यदि वियोजन पूर्ण हो?

Which pair will give the most different osmotic pressures at the same temperature and same molarity, if dissociation is complete?

Explanation opens after your attempt
Correct Answer

C. ग्लूकोज और \(AlCl_3\)Glucose and \(AlCl_3\)

Step 1

Concept

समान (C) और (T) पर \(\pi\) का अंतर (i) के अंतर से आता है। / At same (C) and (T), the difference in \(\pi\) comes from the difference in (i).

Step 2

Why this answer is correct

ग्लूकोज का (i=1), जबकि \(AlCl_3\) का (i=4) है। / Glucose has (i=1), while \(AlCl_3\) has (i=4).

Step 3

Exam Tip

सबसे बड़ा (i) अंतर सबसे बड़ा परासरण दाब अंतर देगा। / The largest difference in (i) gives the largest difference in osmotic pressure.

Open Question Page
Ask Friends

कौन-सा विलयन समान ताप पर सबसे अधिक परासरण दाब देगा, यदि सभी की मोलरता (0.05,M) है और वियोजन पूर्ण है?

Which solution will give the highest osmotic pressure at the same temperature, if all have molarity (0.05,M) and dissociation is complete?

Explanation opens after your attempt
Correct Answer

D. \(AlCl_3\)

Step 1

Concept

\(\pi=iCRT\) है। / \(\pi=iCRT\).

Step 2

Why this answer is correct

समान (C) और (T) पर (i) जितना बड़ा होगा, परासरण दाब उतना बड़ा होगा। / At the same (C) and (T), the larger (i) is, the larger the osmotic pressure.

Step 3

Exam Tip

\(AlCl_3\) चार आयन देता है, इसलिए इसका परासरण दाब सबसे अधिक होगा। / \(AlCl_3\) gives four ions, so it has the highest osmotic pressure.

Open Question Page
Ask Friends

किसी अवियोजित विलेय के (4) ग्राम को (200) ग्राम जल में घोलने से \(\Delta T_f=0.465,K\) है। \(K_f=1.86,K,kg,mol^{-1}\) होने पर मोलर द्रव्यमान क्या होगा?

Dissolving (4) g of a non-dissociated solute in (200) g water gives \(\Delta T_f=0.465,K\). If \(K_f=1.86,K,kg,mol^{-1}\), what is the molar mass?

Explanation opens after your attempt
Correct Answer

C. \(80,g,mol^{-1}\)

Step 1

Concept

\(m=\frac{0.465}{1.86}=0.25\) है। / \(m=\frac{0.465}{1.86}=0.25\).

Step 2

Why this answer is correct

(200) ग्राम जल (0.2) किलोग्राम है, इसलिए विलेय के मोल \(0.25\times0.2=0.05\) हैं। / (200) g water is (0.2) kg, so solute moles \(=0.25\times0.2=0.05\).

Step 3

Exam Tip

मोलर द्रव्यमान \(=\frac{4}{0.05}=80,g,mol^{-1}\)। / Molar mass \(=\frac{4}{0.05}=80,g,mol^{-1}\).

Open Question Page
Ask Friends

किसी (0.1,M) \(K_3PO_4\) विलयन का प्रभावी कण मोलर सांद्रण पूर्ण वियोजन पर कितना होगा?

What will be the effective particle molar concentration of a (0.1,M) \(K_3PO_4\) solution on complete dissociation?

Explanation opens after your attempt
Correct Answer

D. (0.4,M)

Step 1

Concept

\(K_3PO_4\) से (3K^+) और \(PO_4^{3-}\) बनते हैं। / \(K_3PO_4\) gives (3K^+) and \(PO_4^{3-}\).

Step 2

Why this answer is correct

कुल आयन (4) हैं, इसलिए प्रभावी मोलर सांद्रण \(4\times0.1=0.4,M\) होगा। / Total ions are (4), so effective molar concentration \(=4\times0.1=0.4,M\).

Step 3

Exam Tip

परासरण दाब में इसी प्रभावी सांद्रण का उपयोग करें। / Use this effective concentration in osmotic pressure.

Open Question Page
Ask Friends

किस स्थिति में विलेय का प्रेक्षित मोलर द्रव्यमान वास्तविक मोलर द्रव्यमान से कम मिलेगा?

In which situation will the observed molar mass of a solute be less than the true molar mass?

Explanation opens after your attempt
Correct Answer

A. जब विलेय वियोजित होWhen solute dissociates

Step 1

Concept

वियोजन में एक विलेय कण से कई कण बनते हैं। / In dissociation, one solute particle produces several particles.

Step 2

Why this answer is correct

अणुसंख्य प्रभाव बढ़ जाता है और गणना में मोलर द्रव्यमान कम दिखाई देता है। / The colligative effect increases and calculated molar mass appears lower.

Step 3

Exam Tip

कम प्रेक्षित मोलर द्रव्यमान को (i>1) से जोड़ें। / Connect lower observed molar mass with (i>1).

Open Question Page
Ask Friends
FAQs

Class 12 Chemistry Quiz FAQs

How many questions are in this quiz?

This level is designed for 50 active questions. Currently 11 questions are available for the selected class and difficulty.

Is there a timer in this quiz?

Yes, the timer uses 30 seconds per question for Hard difficulty and shows the total remaining time on the page.

Can I open each question separately?

Yes, every question has its own SEO-friendly page with answer, explanation and related practice links.