Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects

Class 12 Chemistry - Chapter 01: Solutions - 6: Molar Mass Determination Expert Quiz

Level 14 • 8/50 questions • 25 seconds per question.

Level readiness 8/50 Questions
Time Left 03:20 25 sec/question
RewardsCoins + XP
ModeClassic Quiz
Share
This level needs 42 more active questions. Admin panel me same class, subject, difficulty aur level_no 14 par question add karein.
Question 1 / 8 0 score
Answered 0/8 Correct 0 Time 03:20

किसी विलेय का सामान्य मोलर द्रव्यमान \(120,g,mol^{-1}\) है और परासरण दाब विधि से प्रेक्षित मोलर द्रव्यमान \(60,g,mol^{-1}\) मिलता है। वांट हॉफ गुणक कितना होगा?

The normal molar mass of a solute is \(120,g,mol^{-1}\), while its observed molar mass from osmotic pressure method is \(60,g,mol^{-1}\). What is the van't Hoff factor?

Explanation opens after your attempt
Correct Answer

C. (2)

Step 1

Concept

\(वांट हॉफ गुणक (i=\frac{\)सामान्य मोलर द्रव्यमान}{प्रेक्षित मोलर द्रव्यमान}) से मिलता है। \(/ Van't Hoff factor is (i=\frac{\)normal molar mass}{observed molar mass}).

Step 2

Why this answer is correct

यहाँ \(i=\frac{120}{60}=2\) होगा। / Here \(i=\frac{120}{60}=2\).

Step 3

Exam Tip

प्रेक्षित द्रव्यमान कम मिले तो वियोजन की संभावना सोचें। / A lower observed molar mass suggests possible dissociation.

Open Question Page
Ask Friends

परासरण दाब से मोलर द्रव्यमान निकालने में बहुत तनु विलयन का प्रयोग क्यों बेहतर होता है?

Why is a very dilute solution preferred for determining molar mass using osmotic pressure?

Explanation opens after your attempt
Correct Answer

A. क्योंकि तनु विलयन में आदर्श व्यवहार के निकट परिणाम मिलते हैंBecause dilute solutions give results close to ideal behaviour

Step 1

Concept

परासरण दाब का सूत्र तनु विलयन के लिए अधिक भरोसेमंद होता है। / The osmotic pressure formula is more reliable for dilute solutions.

Step 2

Why this answer is correct

अधिक सांद्र विलयन में कणों के बीच आकर्षण से विचलन हो सकता है। / In concentrated solutions, interactions between particles may cause deviation.

Step 3

Exam Tip

मोलर द्रव्यमान वाले प्रश्नों में तनुता को आदर्श व्यवहार से जोड़ें। / Link dilution with near-ideal behaviour in molar mass problems.

Open Question Page
Ask Friends

यदि किसी विलेय का प्रेक्षित मोलर द्रव्यमान सामान्य मोलर द्रव्यमान से दोगुना है, तो (i) का मान क्या होगा और कौन सी प्रक्रिया संकेतित होगी?

If the observed molar mass of a solute is twice its normal molar mass, what will be (i) and which process is indicated?

Explanation opens after your attempt
Correct Answer

B. (i=0.5), संघटन(i=0.5), association

Step 1

Concept

\((i=\frac{\)सामान्य मोलर द्रव्यमान}{प्रेक्षित मोलर द्रव्यमान}) होता है। \(/ (i=\frac{\)normal molar mass}{observed molar mass}).

Step 2

Why this answer is correct

प्रेक्षित द्रव्यमान दोगुना है, इसलिए \(i=\frac{1}{2}=0.5\) मिलेगा। / Since observed molar mass is double, \(i=\frac{1}{2}=0.5\).

Step 3

Exam Tip

(i<1) संघटन का संकेत देता है।

Open Question Page
Ask Friends

किसी (0.01,M) प्रोटीन विलयन का मोलर द्रव्यमान निकालने के लिए परासरण दाब विधि क्वथनांक उन्नयन से अधिक उपयोगी क्यों है?

Why is osmotic pressure method more useful than boiling point elevation for finding molar mass of a (0.01,M) protein solution?

Explanation opens after your attempt
Correct Answer

A. क्योंकि छोटे तापांतर की तुलना में परासरण दाब अधिक आसानी से मापा जा सकता हैBecause osmotic pressure can be measured more easily than a tiny temperature change

Step 1

Concept

बड़े अणुओं के विलयन बहुत तनु होते हैं। / Solutions of large molecules are very dilute.

Step 2

Why this answer is correct

इतने तनु विलयन में क्वथनांक उन्नयन बहुत छोटा हो सकता है, पर परासरण दाब मापना आसान रहता है। / In such dilute solutions, boiling point elevation is extremely small, while osmotic pressure is measurable.

Step 3

Exam Tip

जैव अणुओं के लिए परासरण दाब विधि विशेष रूप से याद रखें। / Remember osmotic pressure method especially for biomolecules.

Open Question Page
Ask Friends

किसी विलयन में (0.01) मोल विलेय (1) लीटर विलयन में है और (i=2) है। (300,K) पर परासरण दाब के लिए कौन सा प्रभावी सांद्रता मान लगेगा?

A solution contains (0.01) mole solute in (1) litre solution and (i=2). What effective concentration should be used for osmotic pressure at (300,K)?

Explanation opens after your attempt
Correct Answer

C. (0.02,M)

Step 1

Concept

वास्तविक मोलरता \(C=\frac{0.01}{1}=0.01,M\) है। / Actual molarity is \(C=\frac{0.01}{1}=0.01,M\).

Step 2

Why this answer is correct

परासरण दाब में प्रभावी सांद्रता \(iC=2\times0.01=0.02,M\) होगी। / Effective concentration for osmotic pressure is \(iC=2\times0.01=0.02,M\).

Step 3

Exam Tip

\(\pi=iCRT\) में (i) को अलग से लगाना न भूलें। / Do not forget (i) in \(\pi=iCRT\).

Open Question Page
Ask Friends

किसी विलयन में विलेय संघटित होकर द्विमर बनाता है। ऐसे में मोलर द्रव्यमान की प्रेक्षित गणना पर क्या प्रभाव पड़ेगा?

A solute associates to form dimers in a solution. How will this affect the observed molar mass calculation?

Explanation opens after your attempt
Correct Answer

A. प्रेक्षित मोलर द्रव्यमान सामान्य से अधिक मिलेगाObserved molar mass will be greater than normal

Step 1

Concept

द्विमर बनने पर दो कण मिलकर एक प्रभावी कण बनाते हैं। / In dimer formation, two particles combine to make one effective particle.

Step 2

Why this answer is correct

कण संख्या घटने से अणुसंख्य प्रभाव कम दिखता है और गणना में मोलर द्रव्यमान अधिक आता है। / Fewer particles give a smaller colligative effect, causing calculated observed molar mass to appear higher.

Step 3

Exam Tip

संघटन को अधिक प्रेक्षित मोलर द्रव्यमान से जोड़ें। / Link association with higher observed molar mass.

Open Question Page
Ask Friends

विद्युत अपघट्य के वियोजन के कारण मोलर द्रव्यमान की प्रेक्षित गणना सामान्यतः कैसी मिलती है?

Due to dissociation of an electrolyte, how is the observed molar mass generally obtained?

Explanation opens after your attempt
Correct Answer

C. सामान्य से कमLess than normal

Step 1

Concept

वियोजन से एक कण कई प्रभावी कणों में बदलता है। / Dissociation converts one particle into several effective particles.

Step 2

Why this answer is correct

अणुसंख्य प्रभाव बढ़ जाता है, इसलिए गणना में विलेय के मोल अधिक प्रतीत होते हैं। / The colligative effect increases, so calculated moles appear larger.

Step 3

Exam Tip

इससे प्रेक्षित मोलर द्रव्यमान सामान्य से कम मिलता है। / Therefore observed molar mass becomes less than normal.

Open Question Page
Ask Friends

किसी विद्यार्थी ने कैल्सियम क्लोराइड को अवियोजित मानकर हिमांक अवनमन से मोलर द्रव्यमान निकाला। आदर्श वियोजन की तुलना में उसकी गणना में मुख्य गलती क्या होगी?

A student calculated molar mass from freezing point depression by treating calcium chloride as non-dissociating. What is the main error compared with ideal dissociation?

Explanation opens after your attempt
Correct Answer

A. कण संख्या कम मानी जाएगी और मोलर द्रव्यमान गलत आएगाParticle number will be underestimated and molar mass will be wrong

Step 1

Concept

कैल्सियम क्लोराइड आदर्श रूप से तीन आयन देता है। / Calcium chloride ideally gives three ions.

Step 2

Why this answer is correct

उसे अवियोजित मानने से (i=1) लिया जाएगा, जिससे प्रभावी कण संख्या कम मानी जाएगी। / Treating it as non-dissociating uses (i=1), underestimating effective particle number.

Step 3

Exam Tip

विद्युत अपघट्य के लिए (i) लगाना अनिवार्य है। / For electrolytes, including (i) is essential.

Open Question Page
Ask Friends
FAQs

Class 12 Chemistry Quiz FAQs

How many questions are in this quiz?

This level is designed for 50 active questions. Currently 8 questions are available for the selected class and difficulty.

Is there a timer in this quiz?

Yes, the timer uses 25 seconds per question for Expert difficulty and shows the total remaining time on the page.

Can I open each question separately?

Yes, every question has its own SEO-friendly page with answer, explanation and related practice links.