Topic Wise MCQ

Science Variables in an experiment MCQ Questions for Class 9

Practice focused topic-wise MCQs with answers and explanations for quick revision and exam preparation.

Share

Start Variables in an experiment Topic Quiz

Difficulty select karke sirf is topic ke focused MCQs practice karein. Score, timer aur explanations student-friendly flow me milenge.

Topic Navigation

Continue Chapter Revision

Variables in an experiment Practice Questions

Showing 361-370 of 400 questions.

Search

एक विद्यार्थी साबुन की मात्रा का झाग की ऊँचाई पर प्रभाव जाँचता है। बोतल को हर बार अलग संख्या में हिलाया जाता है। हिलाने की संख्या को क्या करना चाहिए?

A student tests the effect of soap amount on foam height. The bottle is shaken a different number of times in each trial. What should be done with the number of shakes?

Explanation opens after your attempt
Correct Answer

C. हर परीक्षण में समान रखना चाहिएKeep it the same in every trial

Step 1

Concept

The number of shakes can affect foam height so it should be controlled. A consistent procedure allows a fair comparison.

Step 2

Why this answer is correct

The correct answer is C. हर परीक्षण में समान रखना चाहिए / Keep it the same in every trial. The number of shakes can affect foam height so it should be controlled. A consistent procedure allows a fair comparison.

Step 3

Exam Tip

हिलाने की संख्या झाग की ऊँचाई को प्रभावित कर सकती है इसलिए इसे नियंत्रित रखना चाहिए। स्थिर प्रक्रिया निष्पक्ष तुलना देती है।

Open Question Page
Ask Friends

नमक की सांद्रता का आलू के टुकड़ों के द्रव्यमान पर प्रभाव जाँचते समय प्रारंभिक द्रव्यमान अलग-अलग है। सबसे अच्छा सुधार क्या है?

While testing the effect of salt concentration on the mass of potato pieces the initial masses differ. What is the best improvement?

Explanation opens after your attempt
Correct Answer

B. द्रव्यमान में प्रतिशत परिवर्तन की गणना करनाCalculate percentage change in mass

Step 1

Concept

\(When initial masses differ percentage change gives a fairer comparison. It can be calculated using ( \frac{\)final mass-initial mass}{initial mass\(}\times100 ).\)

Step 2

Why this answer is correct

\(The correct answer is B. द्रव्यमान में प्रतिशत परिवर्तन की गणना करना / Calculate percentage change in mass. When initial masses differ percentage change gives a fairer comparison. It can be calculated using ( \frac{\)final mass-initial mass}{initial mass\(}\times100 ).\)

Step 3

Exam Tip

अलग प्रारंभिक द्रव्यमान होने पर प्रतिशत परिवर्तन अधिक निष्पक्ष तुलना देता है। \(गणना ( \frac{\)अंतिम द्रव्यमान-प्रारंभिक द्रव्यमान}{प्रारंभिक द्रव्यमान\(}\times100 ) से की जा सकती है\)।

Open Question Page
Ask Friends

एक प्रयोग में तापमान को लगातार मापा जाता है लेकिन विद्यार्थी उसे बदलता नहीं है। यदि तापमान परिणाम को प्रभावित कर सकता है तो वह किस प्रकार का चर है?

In an experiment temperature is continuously measured but not deliberately changed. If temperature can affect the result what type of variable is it?

Explanation opens after your attempt
Correct Answer

A. निगरानी किया गया नियंत्रित चरMonitored controlled variable

Step 1

Concept

Temperature is not manipulated but measured to check constancy so it is a monitored controlled variable. Recording controls provides evidence of a fair test.

Step 2

Why this answer is correct

The correct answer is A. निगरानी किया गया नियंत्रित चर / Monitored controlled variable. Temperature is not manipulated but measured to check constancy so it is a monitored controlled variable. Recording controls provides evidence of a fair test.

Step 3

Exam Tip

तापमान बदला नहीं गया बल्कि स्थिरता जाँचने के लिए मापा गया है इसलिए यह निगरानी किया गया नियंत्रित चर है। नियंत्रण का प्रमाण दर्ज करना उपयोगी होता है।

Open Question Page
Ask Friends

यदि किसी प्रयोग में स्वतंत्र चर के केवल दो बहुत पास-पास मान लिए जाएँ तो मुख्य कठिनाई क्या होगी?

If only two very close values of the independent variable are used in an experiment what is the main difficulty?

Explanation opens after your attempt
Correct Answer

B. स्पष्ट प्रवृत्ति पहचानना कठिन होगाIt will be difficult to identify a clear trend

Step 1

Concept

Too few closely spaced values may not reveal the trend clearly. Choose suitable intervals and an adequate range for the independent variable.

Step 2

Why this answer is correct

The correct answer is B. स्पष्ट प्रवृत्ति पहचानना कठिन होगा / It will be difficult to identify a clear trend. Too few closely spaced values may not reveal the trend clearly. Choose suitable intervals and an adequate range for the independent variable.

Step 3

Exam Tip

बहुत कम और पास-पास मानों से संबंध की प्रवृत्ति स्पष्ट नहीं दिख सकती। स्वतंत्र चर के उपयुक्त अंतराल और पर्याप्त सीमा चुनें।

Open Question Page
Ask Friends

एक छात्र दावा करता है कि पौधे की प्रजाति आश्रित चर है क्योंकि प्रयोग के अंत में वही पौधा देखा गया। यह दावा क्यों गलत है?

A student claims that plant species is the dependent variable because the plant is observed at the end. Why is this claim incorrect?

Explanation opens after your attempt
Correct Answer

B. प्रजाति परिणाम के रूप में नहीं बदलती बल्कि स्थिर रखी जाती हैSpecies does not change as the outcome and is kept constant

Step 1

Concept

Plant species is usually a controlled variable because it is kept the same across groups. Merely being observed at the end does not make it dependent.

Step 2

Why this answer is correct

The correct answer is B. प्रजाति परिणाम के रूप में नहीं बदलती बल्कि स्थिर रखी जाती है / Species does not change as the outcome and is kept constant. Plant species is usually a controlled variable because it is kept the same across groups. Merely being observed at the end does not make it dependent.

Step 3

Exam Tip

पौधे की प्रजाति सामान्यतः नियंत्रित चर है क्योंकि उसे समूहों में समान रखा जाता है। केवल अंत में देखी गई वस्तु होना किसी चर को आश्रित नहीं बनाता।

Open Question Page
Ask Friends

एक प्रयोग में बैटरी की संख्या बदलकर बल्ब की चमक को एक से पाँच के पैमाने पर आँका जाता है। कौन सा कथन सही है?

In an experiment the number of batteries is changed and bulb brightness is rated on a scale from one to five. Which statement is correct?

Explanation opens after your attempt
Correct Answer

C. बैटरी की संख्या स्वतंत्र और चमक का अंक आश्रित चर हैNumber of batteries is independent and brightness rating is dependent

Step 1

Concept

The number of batteries is deliberately changed and brightness is recorded as the outcome. The manipulated factor is independent and the measured outcome is dependent.

Step 2

Why this answer is correct

The correct answer is C. बैटरी की संख्या स्वतंत्र और चमक का अंक आश्रित चर है / Number of batteries is independent and brightness rating is dependent. The number of batteries is deliberately changed and brightness is recorded as the outcome. The manipulated factor is independent and the measured outcome is dependent.

Step 3

Exam Tip

बैटरी की संख्या जानबूझकर बदली जाती है और चमक का अंक परिणाम के रूप में दर्ज होता है। बदला गया कारक स्वतंत्र तथा मापा गया परिणाम आश्रित होता है।

Open Question Page
Ask Friends

अम्ल की सांद्रता का अभिक्रिया समय पर प्रभाव जाँचने के लिए किस चर को समान रखना सबसे आवश्यक है?

To test the effect of acid concentration on reaction time which variable is most essential to keep the same?

Explanation opens after your attempt
Correct Answer

C. ठोस अभिकारक का पृष्ठीय क्षेत्रफलSurface area of the solid reactant

Step 1

Concept

Surface area affects reaction rate so it should be kept constant. Acid concentration should remain the only independent variable.

Step 2

Why this answer is correct

The correct answer is C. ठोस अभिकारक का पृष्ठीय क्षेत्रफल / Surface area of the solid reactant. Surface area affects reaction rate so it should be kept constant. Acid concentration should remain the only independent variable.

Step 3

Exam Tip

ठोस का पृष्ठीय क्षेत्रफल अभिक्रिया की दर को प्रभावित करता है इसलिए उसे स्थिर रखना चाहिए। स्वतंत्र चर अम्ल की सांद्रता ही रहनी चाहिए।

Open Question Page
Ask Friends

एक ही प्रयोग में अलग-अलग माप सिलिंडरों से तरल का आयतन मापा गया और उनकी सूक्ष्मता अलग थी। यह किस चर से जुड़ी समस्या है?

In the same experiment liquid volume is measured using different measuring cylinders with different precision. This problem is related to which variable?

Explanation opens after your attempt
Correct Answer

A. मापन विधि को नियंत्रित न रखने सेFailure to control the measurement method

Step 1

Concept

Different instruments may change measurement precision so the measurement method should be kept consistent. Equipment can be part of the controlled conditions.

Step 2

Why this answer is correct

The correct answer is A. मापन विधि को नियंत्रित न रखने से / Failure to control the measurement method. Different instruments may change measurement precision so the measurement method should be kept consistent. Equipment can be part of the controlled conditions.

Step 3

Exam Tip

अलग उपकरण मापन की सूक्ष्मता बदल सकते हैं इसलिए मापन विधि समान रखनी चाहिए। उपकरण भी नियंत्रित परिस्थितियों का भाग हो सकता है।

Open Question Page
Ask Friends

एक विद्यार्थी जाँचता है कि ढलान का कोण खिलौना गाड़ी की गति को कैसे प्रभावित करता है। वह हर परीक्षण में अलग प्रारंभिक बिंदु से गाड़ी छोड़ता है। कौन सा निष्कर्ष उचित है?

A student investigates how ramp angle affects the speed of a toy car. The car is released from a different starting point in each trial. Which conclusion is appropriate?

Explanation opens after your attempt
Correct Answer

B. प्रारंभिक बिंदु एक अनियंत्रित चर हैStarting point is an uncontrolled variable

Step 1

Concept

The starting point can affect travel distance and speed so changing it makes the test unfair. It should be the same in every trial.

Step 2

Why this answer is correct

The correct answer is B. प्रारंभिक बिंदु एक अनियंत्रित चर है / Starting point is an uncontrolled variable. The starting point can affect travel distance and speed so changing it makes the test unfair. It should be the same in every trial.

Step 3

Exam Tip

प्रारंभिक बिंदु दूरी और गति को प्रभावित कर सकता है इसलिए उसका बदलना परीक्षण को अनुचित बनाता है। उसे हर बार समान रखना चाहिए।

Open Question Page
Ask Friends

एक प्रयोग में चार मिट्टियों में पौधे उगाए जाते हैं लेकिन प्रत्येक मिट्टी को अलग मात्रा में पानी मिलता है। मिट्टी के प्रकार के प्रभाव को अलग करने के लिए क्या करना चाहिए?

Plants are grown in four soil types but each soil receives a different amount of water. What should be done to isolate the effect of soil type?

Explanation opens after your attempt
Correct Answer

A. सभी को समान मात्रा में पानी देनाGive all plants the same amount of water

Step 1

Concept

Water amount can affect growth so it should be identical for all groups. This keeps soil type as the only manipulated factor.

Step 2

Why this answer is correct

The correct answer is A. सभी को समान मात्रा में पानी देना / Give all plants the same amount of water. Water amount can affect growth so it should be identical for all groups. This keeps soil type as the only manipulated factor.

Step 3

Exam Tip

पानी की मात्रा वृद्धि को प्रभावित कर सकती है इसलिए उसे सभी समूहों में समान रखना चाहिए। इससे मिट्टी का प्रकार एकमात्र बदला गया कारक रहेगा।

Open Question Page
Ask Friends