Class 9 Art Education - Painting Techniques - Colour filling and blending Hard Quiz

Level 95 • 50/50 questions • 30 seconds per question.

Level readiness 50/50 Questions
Time Left 25:00 30 sec/question
RewardsCoins + XP
ModeClassic Quiz
Share
Question 1 / 50 0 score
Answered 0/50 Correct 0 Time 25:00

एक बड़े क्षेत्र में रंग भरते समय बीच में स्पष्ट पट्टियां बन रही हैं जबकि ब्रश का आकार उपयुक्त है। सबसे संभावित तकनीकी कारण क्या है?

Clear bands appear while filling a large area even though the brush size is suitable. What is the most likely technical cause?

Explanation opens after your attempt
Correct Answer

A. हर नए स्ट्रोक से पहले पिछला किनारा सूख जानाThe previous edge dries before each new stroke

Step 1

Concept

A visible band forms when new paint meets a dried edge. Keep the working edge damp and maintain a steady pace in exams.

Step 2

Why this answer is correct

The correct answer is A. हर नए स्ट्रोक से पहले पिछला किनारा सूख जाना / The previous edge dries before each new stroke. A visible band forms when new paint meets a dried edge. Keep the working edge damp and maintain a steady pace in exams.

Step 3

Exam Tip

सूखे किनारे पर नया रंग मिलने से स्पष्ट पट्टी बनती है। परीक्षा में कार्यशील किनारे को नम और गति को नियमित रखें।

Open Question Page
Ask Friends

दो नम रंगों को मिलाते समय एक रंग दूसरे क्षेत्र में तेजी से फैल रहा है। इसका मुख्य कारण क्या है?

While blending two damp colours one colour spreads rapidly into the other area. What is the main cause?

Explanation opens after your attempt
Correct Answer

B. दोनों क्षेत्रों में नमी का स्तर असमान हैThe moisture level is unequal in the two areas

Step 1

Concept

The wetter colour flows into the less-wet area and increases spreading. Keep the moisture of both colours balanced in exams.

Step 2

Why this answer is correct

The correct answer is B. दोनों क्षेत्रों में नमी का स्तर असमान है / The moisture level is unequal in the two areas. The wetter colour flows into the less-wet area and increases spreading. Keep the moisture of both colours balanced in exams.

Step 3

Exam Tip

अधिक गीला रंग कम गीले क्षेत्र की ओर बहकर फैलाव बढ़ाता है। परीक्षा में दोनों रंगों की नमी संतुलित रखें।

Open Question Page
Ask Friends

हल्के से गहरे ग्रेडेशन में मध्य भाग अचानक बहुत गहरा हो गया। कौन-सी त्रुटि सबसे अधिक संभावित है?

In a light-to-dark gradation the middle area suddenly became too dark. Which error is most likely?

Explanation opens after your attempt
Correct Answer

C. मध्य भाग में गहरे रंग की मात्रा अचानक अधिक हो गईThe amount of dark colour increased suddenly in the middle

Step 1

Concept

A sudden change in colour proportion breaks the gradation. Increase the dark colour gradually in exams.

Step 2

Why this answer is correct

The correct answer is C. मध्य भाग में गहरे रंग की मात्रा अचानक अधिक हो गई / The amount of dark colour increased suddenly in the middle. A sudden change in colour proportion breaks the gradation. Increase the dark colour gradually in exams.

Step 3

Exam Tip

रंग अनुपात के अचानक बदलने से ग्रेडेशन टूट जाता है। परीक्षा में गहरे रंग की मात्रा धीरे-धीरे बढ़ाएं।

Open Question Page
Ask Friends

एक समान रंग भराव के नीचे गहरी सीमा बन गई है। इसे रोकने का सबसे उपयुक्त तरीका क्या है?

A dark boundary has formed at the bottom of an even colour fill. What is the most suitable way to prevent it?

Explanation opens after your attempt
Correct Answer

D. नीचे जमा अतिरिक्त रंग को साफ नम ब्रश से उठानाLift the excess pooled paint with a clean damp brush

Step 1

Concept

Pooled paint at the bottom dries into a dark boundary. Lift accumulated liquid before it dries in exams.

Step 2

Why this answer is correct

The correct answer is D. नीचे जमा अतिरिक्त रंग को साफ नम ब्रश से उठाना / Lift the excess pooled paint with a clean damp brush. Pooled paint at the bottom dries into a dark boundary. Lift accumulated liquid before it dries in exams.

Step 3

Exam Tip

नीचे जमा रंग सूखकर गहरी सीमा बनाता है। परीक्षा में जमा द्रव को सूखने से पहले उठाएं।

Open Question Page
Ask Friends

एक गोल वस्तु में रंग सही हैं लेकिन वह सपाट दिख रही है। कौन-सा सुधार सबसे प्रभावी होगा?

The colours on a round object are correct but it appears flat. Which correction will be most effective?

Explanation opens after your attempt
Correct Answer

A. प्रकाश से छाया तक क्रमिक टोन और मध्य टोन जोड़नाAdd gradual tones and middle tones from light to shadow

Step 1

Concept

Middle tones and gradual light-to-shadow changes create the illusion of roundness. Determine the light direction first in exams.

Step 2

Why this answer is correct

The correct answer is A. प्रकाश से छाया तक क्रमिक टोन और मध्य टोन जोड़ना / Add gradual tones and middle tones from light to shadow. Middle tones and gradual light-to-shadow changes create the illusion of roundness. Determine the light direction first in exams.

Step 3

Exam Tip

मध्य टोन और क्रमिक प्रकाश छाया गोलाई का भ्रम बनाते हैं। परीक्षा में प्रकाश की दिशा पहले निर्धारित करें।

Open Question Page
Ask Friends

दो पूरक रंगों को मिलाने पर अपेक्षा से अधिक मटमैला रंग बन गया। सबसे उचित कारण क्या है?

Mixing two complementary colours produced a duller colour than expected. What is the most appropriate reason?

Explanation opens after your attempt
Correct Answer

B. दोनों रंग आवश्यकता से अधिक मिला दिए गएThe colours were mixed more than required

Step 1

Concept

Complementary colours reduce each other's intensity and become neutral when overmixed. Mix them in limited amounts in exams.

Step 2

Why this answer is correct

The correct answer is B. दोनों रंग आवश्यकता से अधिक मिला दिए गए / The colours were mixed more than required. Complementary colours reduce each other's intensity and become neutral when overmixed. Mix them in limited amounts in exams.

Step 3

Exam Tip

पूरक रंग अधिक मिलने पर एक दूसरे की तीव्रता घटाकर तटस्थ प्रभाव देते हैं। परीक्षा में उन्हें सीमित मात्रा में मिलाएं।

Open Question Page
Ask Friends

किसी आकृति की सीमा साफ है लेकिन भीतर का रंग धब्बेदार दिखाई देता है। कौन-सा कारण सबसे संभावित है?

The boundary of a shape is clean but the colour inside appears patchy. What is the most likely cause?

Explanation opens after your attempt
Correct Answer

C. भीतर असमान दबाव और अलग-अलग रंग मात्रा से स्ट्रोक लगाए गएStrokes were applied with uneven pressure and different paint amounts inside

Step 1

Concept

Uneven pressure and loading deposit different amounts of paint. Keep both consistent while filling in exams.

Step 2

Why this answer is correct

The correct answer is C. भीतर असमान दबाव और अलग-अलग रंग मात्रा से स्ट्रोक लगाए गए / Strokes were applied with uneven pressure and different paint amounts inside. Uneven pressure and loading deposit different amounts of paint. Keep both consistent while filling in exams.

Step 3

Exam Tip

असमान दबाव और लोडिंग से कहीं अधिक और कहीं कम रंग जमा होता है। परीक्षा में भराव के दौरान दोनों को स्थिर रखें।

Open Question Page
Ask Friends

दो रंगों के बीच सॉफ्ट एज बनाते समय पूरा मध्य भाग धुंधला हो गया। सही सुधार क्या है?

While creating a soft edge between two colours the entire middle area became blurred. What is the correct correction?

Explanation opens after your attempt
Correct Answer

D. केवल सीमा पर साफ नम ब्रश से सीमित ब्लेंडिंग करनाBlend only the boundary in a limited way with a clean damp brush

Step 1

Concept

A soft edge requires gentle blending only at the boundary. Use localized blending and avoid rubbing the entire area in exams.

Step 2

Why this answer is correct

The correct answer is D. केवल सीमा पर साफ नम ब्रश से सीमित ब्लेंडिंग करना / Blend only the boundary in a limited way with a clean damp brush. A soft edge requires gentle blending only at the boundary. Use localized blending and avoid rubbing the entire area in exams.

Step 3

Exam Tip

सॉफ्ट एज के लिए केवल सीमा को हल्का मिलाया जाता है। परीक्षा में स्थानीय ब्लेंडिंग करें और पूरे क्षेत्र को न रगड़ें।

Open Question Page
Ask Friends

पारदर्शी ग्लेज लगाने पर नीचे की परत उठ रही है। पहला तकनीकी सुधार क्या होना चाहिए?

The lower layer lifts while applying a transparent glaze. What should be the first technical correction?

Explanation opens after your attempt
Correct Answer

A. पहली परत को पूरी तरह सूखने देनाAllow the first layer to dry completely

Step 1

Concept

A partly dry layer may reactivate and lift under the next wet layer. Allow complete drying between glazes in exams.

Step 2

Why this answer is correct

The correct answer is A. पहली परत को पूरी तरह सूखने देना / Allow the first layer to dry completely. A partly dry layer may reactivate and lift under the next wet layer. Allow complete drying between glazes in exams.

Step 3

Exam Tip

अधसूखी परत अगली गीली परत से पुनः सक्रिय होकर उठ सकती है। परीक्षा में ग्लेजिंग के बीच पूर्ण सुखाव रखें।

Open Question Page
Ask Friends

एक बड़े आकाश क्षेत्र में नीचे की ओर रंग अनचाहे हल्का होता गया। यदि ग्रेडेशन उद्देश्य नहीं था तो क्या कारण संभव है?

In a large sky area the colour unintentionally became lighter toward the bottom. If gradation was not intended what may be the cause?

Explanation opens after your attempt
Correct Answer

B. ब्रश को नीचे जाते समय समान रंग मिश्रण से दोबारा नहीं भरा गयाThe brush was not reloaded with the same colour mixture while moving downward

Step 1

Concept

As pigment concentration decreases in the brush later strokes become lighter. Keep mixture and loading consistent for even filling in exams.

Step 2

Why this answer is correct

The correct answer is B. ब्रश को नीचे जाते समय समान रंग मिश्रण से दोबारा नहीं भरा गया / The brush was not reloaded with the same colour mixture while moving downward. As pigment concentration decreases in the brush later strokes become lighter. Keep mixture and loading consistent for even filling in exams.

Step 3

Exam Tip

ब्रश में रंग की सांद्रता घटने से बाद के स्ट्रोक हल्के होते जाते हैं। परीक्षा में समान भराव के लिए मिश्रण और लोडिंग स्थिर रखें।

Open Question Page
Ask Friends

रंग भरते समय कागज की सतह रोएंदार हो गई। कौन-सा व्यवहार इसका मुख्य कारण है?

The paper surface became fuzzy during colour filling. Which behaviour is the main cause?

Explanation opens after your attempt
Correct Answer

C. गीले क्षेत्र पर बार-बार दबाव से ब्रश चलानाRepeatedly brushing a wet area with pressure

Step 1

Concept

Wet paper is weak and repeated rubbing raises its fibres. Use fewer strokes on damp surfaces in exams.

Step 2

Why this answer is correct

The correct answer is C. गीले क्षेत्र पर बार-बार दबाव से ब्रश चलाना / Repeatedly brushing a wet area with pressure. Wet paper is weak and repeated rubbing raises its fibres. Use fewer strokes on damp surfaces in exams.

Step 3

Exam Tip

गीला कागज कमजोर होता है और बार-बार रगड़ने से उसके रेशे उठते हैं। परीक्षा में नम सतह पर कम स्ट्रोक लगाएं।

Open Question Page
Ask Friends

यदि किसी क्षेत्र का रंग सूखने पर अपेक्षा से हल्का दिखाई दे तो इसका सबसे व्यावहारिक समाधान क्या है?

If an area appears lighter than expected after drying what is the most practical solution?

Explanation opens after your attempt
Correct Answer

D. सूखने के बाद उसी रंग की नियंत्रित पारदर्शी परत लगानाApply a controlled transparent layer of the same colour after drying

Step 1

Concept

A transparent layer over a dry surface can deepen the colour. Test the colour on a small area first in exams.

Step 2

Why this answer is correct

The correct answer is D. सूखने के बाद उसी रंग की नियंत्रित पारदर्शी परत लगाना / Apply a controlled transparent layer of the same colour after drying. A transparent layer over a dry surface can deepen the colour. Test the colour on a small area first in exams.

Step 3

Exam Tip

सूखी सतह पर पारदर्शी परत रंग की गहराई बढ़ा सकती है। परीक्षा में पहले छोटे भाग पर रंग जांचें।

Open Question Page
Ask Friends

रंग भरते समय सीमा के बाहर निकले छोटे गीले दाग को सुधारने का सबसे सुरक्षित तरीका क्या है?

What is the safest way to correct a small wet stain that has crossed a boundary during colour filling?

Explanation opens after your attempt
Correct Answer

A. साफ नम ब्रश या टिश्यू से हल्के दबाव द्वारा रंग उठानाLift the colour gently with a clean damp brush or tissue

Step 1

Concept

Wet paint can be removed easily through gentle absorption. Blot rather than scrub in exams.

Step 2

Why this answer is correct

The correct answer is A. साफ नम ब्रश या टिश्यू से हल्के दबाव द्वारा रंग उठाना / Lift the colour gently with a clean damp brush or tissue. Wet paint can be removed easily through gentle absorption. Blot rather than scrub in exams.

Step 3

Exam Tip

गीला रंग हल्के सोखाव से आसानी से उठ सकता है। परीक्षा में रगड़ने के बजाय दबाकर रंग हटाएं।

Open Question Page
Ask Friends

दो निकटवर्ती रंगों को मिलाते समय सीमा पर अनचाहा तीसरा रंग बन रहा है। कौन-सा उपाय उचित है?

An unwanted third colour forms at the boundary while blending two adjacent colours. Which remedy is appropriate?

Explanation opens after your attempt
Correct Answer

B. सीमा को साफ ब्रश से सीमित क्षेत्र में मिलाना और रंग संगति जांचनाBlend a limited boundary with a clean brush and check colour compatibility

Step 1

Concept

A clean brush and limited mixing reduce unwanted muddy colour. Also consider colour relationships in exams.

Step 2

Why this answer is correct

The correct answer is B. सीमा को साफ ब्रश से सीमित क्षेत्र में मिलाना और रंग संगति जांचना / Blend a limited boundary with a clean brush and check colour compatibility. A clean brush and limited mixing reduce unwanted muddy colour. Also consider colour relationships in exams.

Step 3

Exam Tip

साफ ब्रश और सीमित मिश्रण अनचाहे मटमैले रंग को कम करते हैं। परीक्षा में रंग संबंध भी ध्यान रखें।

Open Question Page
Ask Friends

एक बेलनाकार वस्तु पर प्रकाश और छाया के बीच समानांतर कठोर पट्टियां बन गई हैं। अधिक प्राकृतिक प्रभाव के लिए क्या करना चाहिए?

Parallel hard bands have formed between light and shadow on a cylindrical object. What should be done for a more natural effect?

Explanation opens after your attempt
Correct Answer

C. पट्टियों के बीच मध्य टोन बनाकर वक्र दिशा में मुलायम ब्लेंडिंग करनाCreate middle tones between the bands and blend softly along the curved direction

Step 1

Concept

Middle tones and blending along the curve show the cylinder's roundness. Blend according to the form in exams.

Step 2

Why this answer is correct

The correct answer is C. पट्टियों के बीच मध्य टोन बनाकर वक्र दिशा में मुलायम ब्लेंडिंग करना / Create middle tones between the bands and blend softly along the curved direction. Middle tones and blending along the curve show the cylinder's roundness. Blend according to the form in exams.

Step 3

Exam Tip

मध्य टोन और वक्र दिशा का मिश्रण बेलन की गोलाई दिखाता है। परीक्षा में रूप के अनुसार ब्लेंडिंग करें।

Open Question Page
Ask Friends

यदि गहरे रंग को हल्का करने के लिए बहुत अधिक सफेद मिला दिया जाए तो कौन-सा प्रभाव संभव है?

What effect is possible if too much white is added to lighten a dark colour?

Explanation opens after your attempt
Correct Answer

D. रंग फीका और चाक जैसा दिखाई दे सकता हैThe colour may appear pale and chalky

Step 1

Concept

Too much white can reduce the original colour intensity and make it look chalky. Add white in small amounts in exams.

Step 2

Why this answer is correct

The correct answer is D. रंग फीका और चाक जैसा दिखाई दे सकता है / The colour may appear pale and chalky. Too much white can reduce the original colour intensity and make it look chalky. Add white in small amounts in exams.

Step 3

Exam Tip

अधिक सफेद मूल रंग की तीव्रता घटाकर उसे चाक जैसा बना सकता है। परीक्षा में सफेद थोड़ी मात्रा में जोड़ें।

Open Question Page
Ask Friends

एक चित्र में मुख्य विषय और पृष्ठभूमि दोनों की रंग तीव्रता समान है। दृश्य केंद्र बनाने का सही उपाय क्या है?

The main subject and background have equal colour intensity. What is the correct way to create a focal point?

Explanation opens after your attempt
Correct Answer

A. मुख्य विषय में अधिक नियंत्रित तीव्रता और पृष्ठभूमि में शांत रंग रखनाUse stronger controlled intensity in the main subject and quieter colours in the background

Step 1

Concept

A difference in colour intensity separates the main subject from supporting areas. Create visual hierarchy through colour in exams.

Step 2

Why this answer is correct

The correct answer is A. मुख्य विषय में अधिक नियंत्रित तीव्रता और पृष्ठभूमि में शांत रंग रखना / Use stronger controlled intensity in the main subject and quieter colours in the background. A difference in colour intensity separates the main subject from supporting areas. Create visual hierarchy through colour in exams.

Step 3

Exam Tip

रंग तीव्रता का अंतर मुख्य विषय को सहायक क्षेत्रों से अलग करता है। परीक्षा में रंग द्वारा दृश्य पदानुक्रम बनाएं।

Open Question Page
Ask Friends

गर्म से ठंडे रंग का संक्रमण बनाते समय मध्य भाग मटमैला हो गया। कौन-सा कारण सबसे संभावित है?

The middle area became muddy while creating a warm-to-cool colour transition. What is the most likely cause?

Explanation opens after your attempt
Correct Answer

B. असंगत रंगों को अत्यधिक रगड़कर मिलाया गयाIncompatible colours were overmixed by repeated rubbing

Step 1

Concept

Overmixing can reduce colour clarity and temperature contrast. Create the middle colour in a controlled amount in exams.

Step 2

Why this answer is correct

The correct answer is B. असंगत रंगों को अत्यधिक रगड़कर मिलाया गया / Incompatible colours were overmixed by repeated rubbing. Overmixing can reduce colour clarity and temperature contrast. Create the middle colour in a controlled amount in exams.

Step 3

Exam Tip

अधिक मिश्रण रंगों की स्पष्टता और तापमान अंतर घटा सकता है। परीक्षा में मध्य रंग को नियंत्रित मात्रा में बनाएं।

Open Question Page
Ask Friends

पारदर्शी वॉश में कुछ भाग अपारदर्शी दिखाई दे रहे हैं। इसका सबसे संभावित कारण क्या है?

Some parts of a transparent wash appear opaque. What is the most likely cause?

Explanation opens after your attempt
Correct Answer

C. उन भागों में गाढ़ा रंग या कई परतें जमा हो गई हैंThick paint or multiple layers have accumulated in those areas

Step 1

Concept

Accumulation of thick paint and layers reduces transparency. Keep wash mixtures thin and even in exams.

Step 2

Why this answer is correct

The correct answer is C. उन भागों में गाढ़ा रंग या कई परतें जमा हो गई हैं / Thick paint or multiple layers have accumulated in those areas. Accumulation of thick paint and layers reduces transparency. Keep wash mixtures thin and even in exams.

Step 3

Exam Tip

अधिक रंग और परतों का जमाव पारदर्शिता कम करता है। परीक्षा में वॉश के लिए मिश्रण पतला और समान रखें।

Open Question Page
Ask Friends

ग्लेजिंग के बाद नीचे का रंग बिल्कुल दिखाई नहीं दे रहा। तकनीकी त्रुटि क्या है?

The lower colour is not visible at all after glazing. What is the technical error?

Explanation opens after your attempt
Correct Answer

D. ऊपरी परत बहुत गाढ़ी या अपारदर्शी लगाई गईThe upper layer was applied too thickly or opaquely

Step 1

Concept

A glaze must be thin and transparent so the lower layer remains visible. Control paint concentration in exams.

Step 2

Why this answer is correct

The correct answer is D. ऊपरी परत बहुत गाढ़ी या अपारदर्शी लगाई गई / The upper layer was applied too thickly or opaquely. A glaze must be thin and transparent so the lower layer remains visible. Control paint concentration in exams.

Step 3

Exam Tip

ग्लेज पारदर्शी और पतली होनी चाहिए ताकि नीचे की परत दिखाई दे। परीक्षा में रंग की सांद्रता नियंत्रित रखें।

Open Question Page
Ask Friends

किसी आकृति के भीतर किनारों पर रंग हल्का और मध्य में गहरा जमा हो गया। यह किस तकनीकी असंतुलन का संकेत है?

Within a shape the colour is light near the edges and dark in the centre. What technical imbalance does this indicate?

Explanation opens after your attempt
Correct Answer

A. ब्रश लोडिंग और दबाव क्षेत्रभर समान नहीं थेBrush loading and pressure were not consistent across the area

Step 1

Concept

Uneven loading and pressure change paint distribution. Maintain consistent strokes and paint quantity across the area in exams.

Step 2

Why this answer is correct

The correct answer is A. ब्रश लोडिंग और दबाव क्षेत्रभर समान नहीं थे / Brush loading and pressure were not consistent across the area. Uneven loading and pressure change paint distribution. Maintain consistent strokes and paint quantity across the area in exams.

Step 3

Exam Tip

असमान लोडिंग और दबाव से रंग वितरण बदलता है। परीक्षा में पूरे क्षेत्र में समान स्ट्रोक और मात्रा रखें।

Open Question Page
Ask Friends

रंग मिश्रण का एक भाग सूखने के बाद दूसरे भाग से अलग दिखाई दे रहा है जबकि दोनों गीली अवस्था में समान लगे थे। कौन-सा कारण संभव है?

One part of a colour mixture looks different after drying although both parts appeared similar when wet. What may be the cause?

Explanation opens after your attempt
Correct Answer

B. दोनों भागों में परत की मोटाई अलग थीThe layer thickness differed between the two parts

Step 1

Concept

Thick and thin layers can show different colour depth after drying. Keep layer thickness consistent in exams.

Step 2

Why this answer is correct

The correct answer is B. दोनों भागों में परत की मोटाई अलग थी / The layer thickness differed between the two parts. Thick and thin layers can show different colour depth after drying. Keep layer thickness consistent in exams.

Step 3

Exam Tip

मोटी और पतली परतें सूखने पर अलग गहराई दिखा सकती हैं। परीक्षा में परत की मोटाई समान रखें।

Open Question Page
Ask Friends

एक प्रकाशमान क्षेत्र को चमकीला दिखाने के लिए आसपास के टोन का क्या उपयोग प्रभावी है?

How can surrounding tones be used effectively to make a lit area appear brighter?

Explanation opens after your attempt
Correct Answer

C. आसपास अपेक्षाकृत गहरे टोन रखकर नियंत्रित विरोध बनानाPlace relatively darker tones around it to create controlled contrast

Step 1

Concept

Nearby darker tones increase contrast and make the light area appear brighter. Understand tonal relationships in exams.

Step 2

Why this answer is correct

The correct answer is C. आसपास अपेक्षाकृत गहरे टोन रखकर नियंत्रित विरोध बनाना / Place relatively darker tones around it to create controlled contrast. Nearby darker tones increase contrast and make the light area appear brighter. Understand tonal relationships in exams.

Step 3

Exam Tip

निकट गहरे टोन हल्के क्षेत्र का विरोध बढ़ाकर उसे अधिक चमकीला दिखाते हैं। परीक्षा में टोन संबंध समझें।

Open Question Page
Ask Friends

एक चित्र में सभी रंग संक्रमण समान रूप से मुलायम हैं। इससे कौन-सी समस्या हो सकती है?

All colour transitions in a painting are equally soft. What problem may result?

Explanation opens after your attempt
Correct Answer

D. आकारों की स्पष्टता और केंद्र बिंदु कमजोर हो सकते हैंShape clarity and focal emphasis may weaken

Step 1

Concept

Keeping every boundary soft can make forms merge into one another. Balance hard and soft transitions in exams.

Step 2

Why this answer is correct

The correct answer is D. आकारों की स्पष्टता और केंद्र बिंदु कमजोर हो सकते हैं / Shape clarity and focal emphasis may weaken. Keeping every boundary soft can make forms merge into one another. Balance hard and soft transitions in exams.

Step 3

Exam Tip

हर सीमा को मुलायम रखने से रूप आपस में घुल सकते हैं। परीक्षा में हार्ड और सॉफ्ट संक्रमण का संतुलन रखें।

Open Question Page
Ask Friends

रंग उठाते समय ब्रश साफ होने के बाद भी सतह पर पानी का हल्का दाग बन रहा है। इसका कारण क्या हो सकता है?

Even with a clean brush a light water mark forms while lifting colour. What may be the cause?

Explanation opens after your attempt
Correct Answer

A. ब्रश सतह की तुलना में अधिक गीला हैThe brush is wetter than the surface

Step 1

Concept

An overly wet brush may deposit fresh water and create a mark. Rinse and blot the brush lightly in exams.

Step 2

Why this answer is correct

The correct answer is A. ब्रश सतह की तुलना में अधिक गीला है / The brush is wetter than the surface. An overly wet brush may deposit fresh water and create a mark. Rinse and blot the brush lightly in exams.

Step 3

Exam Tip

अधिक गीला ब्रश नया पानी छोड़कर दाग बना सकता है। परीक्षा में ब्रश को धोकर हल्का पोंछें।

Open Question Page
Ask Friends

एक गहरे रंग को हल्का करने के लिए बार-बार पानी मिलाने से रंग का व्यवहार कैसे बदलेगा?

How will repeatedly adding water to lighten a dark colour change its behaviour?

Explanation opens after your attempt
Correct Answer

B. रंग अधिक पारदर्शी और बहने योग्य होगाThe colour will become more transparent and fluid

Step 1

Concept

Adding water lowers pigment concentration and increases flow. Understand the difference between lightness and transparency in exams.

Step 2

Why this answer is correct

The correct answer is B. रंग अधिक पारदर्शी और बहने योग्य होगा / The colour will become more transparent and fluid. Adding water lowers pigment concentration and increases flow. Understand the difference between lightness and transparency in exams.

Step 3

Exam Tip

पानी बढ़ाने से रंग की सांद्रता घटती है और प्रवाह बढ़ता है। परीक्षा में हल्कापन और पारदर्शिता का अंतर समझें।

Open Question Page
Ask Friends

यदि रंग को हल्का करना हो लेकिन उसकी अपारदर्शिता बनाए रखनी हो तो कौन-सा उपाय अधिक उचित है?

If a colour must be lightened while retaining opacity which method is more appropriate?

Explanation opens after your attempt
Correct Answer

C. उपयुक्त मात्रा में सफेद या हल्का अपारदर्शी रंग मिलानाMix a suitable amount of white or a lighter opaque colour

Step 1

Concept

Water increases transparency while white can create a tint and retain opacity. Understand the properties of the medium in exams.

Step 2

Why this answer is correct

The correct answer is C. उपयुक्त मात्रा में सफेद या हल्का अपारदर्शी रंग मिलाना / Mix a suitable amount of white or a lighter opaque colour. Water increases transparency while white can create a tint and retain opacity. Understand the properties of the medium in exams.

Step 3

Exam Tip

पानी पारदर्शिता बढ़ाता है जबकि सफेद रंग टिंट बनाकर अपारदर्शिता बनाए रख सकता है। परीक्षा में माध्यम के गुण समझें।

Open Question Page
Ask Friends

यदि किसी छाया में केवल काला मिलाने से रंग निर्जीव हो गया हो तो बेहतर सुधार क्या है?

If a shadow colour becomes lifeless after adding only black what is a better correction?

Explanation opens after your attempt
Correct Answer

D. मूल रंग के अनुकूल गहरा ठंडा या पूरक रंग नियंत्रित मात्रा में मिलानाMix a suitable dark cool or complementary colour in a controlled amount

Step 1

Concept

Chromatic dark tones retain life and colour relationships in shadows. Do not use only black for every shadow in exams.

Step 2

Why this answer is correct

The correct answer is D. मूल रंग के अनुकूल गहरा ठंडा या पूरक रंग नियंत्रित मात्रा में मिलाना / Mix a suitable dark cool or complementary colour in a controlled amount. Chromatic dark tones retain life and colour relationships in shadows. Do not use only black for every shadow in exams.

Step 3

Exam Tip

रंगीन गहरे टोन छाया में जीवन और रंग संबंध बनाए रखते हैं। परीक्षा में हर छाया के लिए केवल काला न चुनें।

Open Question Page
Ask Friends

गीले रंगों की ब्लेंडिंग में कलाकार को रंगों की सीमा नियंत्रित रखनी है। कौन-सा उपाय सबसे प्रभावी है?

An artist wants to control the boundary while blending wet colours. Which measure is most effective?

Explanation opens after your attempt
Correct Answer

A. सतह और ब्रश की नमी सीमित रखते हुए छोटे नियंत्रित स्ट्रोक लगानाUse small controlled strokes while limiting surface and brush moisture

Step 1

Concept

Limited moisture controls colour spreading. Understand the difference between a soft edge and uncontrolled flow in exams.

Step 2

Why this answer is correct

The correct answer is A. सतह और ब्रश की नमी सीमित रखते हुए छोटे नियंत्रित स्ट्रोक लगाना / Use small controlled strokes while limiting surface and brush moisture. Limited moisture controls colour spreading. Understand the difference between a soft edge and uncontrolled flow in exams.

Step 3

Exam Tip

सीमित नमी रंग के फैलाव को नियंत्रित करती है। परीक्षा में सॉफ्ट एज और अनियंत्रित बहाव का अंतर समझें।

Open Question Page
Ask Friends

एक ग्रेडेशन में हल्के भाग का क्षेत्र बहुत छोटा है जिससे वस्तु अत्यधिक अंधेरी लगती है। क्या सुधार उचित है?

In a gradation the light area is too small making the object appear overly dark. What correction is appropriate?

Explanation opens after your attempt
Correct Answer

B. हल्के और मध्य टोन का क्षेत्र बढ़ाकर संक्रमण पुनः संतुलित करनाExpand the light and middle-tone areas to rebalance the transition

Step 1

Concept

The proportion of tonal areas affects light and volume. Balance light middle and shadow tones in exams.

Step 2

Why this answer is correct

The correct answer is B. हल्के और मध्य टोन का क्षेत्र बढ़ाकर संक्रमण पुनः संतुलित करना / Expand the light and middle-tone areas to rebalance the transition. The proportion of tonal areas affects light and volume. Balance light middle and shadow tones in exams.

Step 3

Exam Tip

टोन क्षेत्रों का अनुपात वस्तु के प्रकाश और आयतन को प्रभावित करता है। परीक्षा में प्रकाश मध्य और छाया टोन संतुलित रखें।

Open Question Page
Ask Friends

एक समतल रंग क्षेत्र में अनचाही चमकदार और फीकी पट्टियां बन गई हैं। इसका कारण क्या हो सकता है?

Unwanted bright and dull bands have appeared in a flat colour area. What may be the cause?

Explanation opens after your attempt
Correct Answer

C. परत की मोटाई और रंग सांद्रता अलग-अलग रहीLayer thickness and paint concentration varied

Step 1

Concept

Different layer thicknesses and concentrations can create variations in sheen and tone after drying. Keep the fill consistent in exams.

Step 2

Why this answer is correct

The correct answer is C. परत की मोटाई और रंग सांद्रता अलग-अलग रही / Layer thickness and paint concentration varied. Different layer thicknesses and concentrations can create variations in sheen and tone after drying. Keep the fill consistent in exams.

Step 3

Exam Tip

अलग परत मोटाई और सांद्रता सूखने पर चमक तथा टोन में अंतर ला सकती हैं। परीक्षा में भराव समान रखें।

Open Question Page
Ask Friends

गहरे रंग पर हल्का रंग सीधे लगाने से वह अपेक्षित रूप से चमकीला नहीं दिखा। सबसे उपयुक्त कारण क्या है?

A light colour applied directly over a dark colour does not appear as bright as expected. What is the most suitable reason?

Explanation opens after your attempt
Correct Answer

D. हल्की परत पारदर्शी होने से नीचे का गहरा रंग दिखाई दे रहा हैThe light layer is transparent so the dark colour underneath shows through

Step 1

Concept

A transparent light colour is influenced by the dark base below. Choose a suitable opaque layer for a bright effect in exams.

Step 2

Why this answer is correct

The correct answer is D. हल्की परत पारदर्शी होने से नीचे का गहरा रंग दिखाई दे रहा है / The light layer is transparent so the dark colour underneath shows through. A transparent light colour is influenced by the dark base below. Choose a suitable opaque layer for a bright effect in exams.

Step 3

Exam Tip

पारदर्शी हल्का रंग नीचे के गहरे आधार से प्रभावित होता है। परीक्षा में उजले अपारदर्शी प्रभाव के लिए उपयुक्त परत चुनें।

Open Question Page
Ask Friends

एक वस्तु के प्रकाश और छाया का मिश्रण सही है लेकिन किनारा हर जगह समान है। अधिक यथार्थ प्रभाव के लिए क्या करें?

The light and shadow blending of an object is correct but the edge is identical everywhere. What should be done for a more realistic effect?

Explanation opens after your attempt
Correct Answer

A. महत्वपूर्ण भागों में स्पष्ट और मुड़ते भागों में मुलायम किनारे रखेंUse clear edges in important areas and softer edges where the form turns

Step 1

Concept

Edge variety controls both form and attention. Choose edges according to form direction and focal emphasis in exams.

Step 2

Why this answer is correct

The correct answer is A. महत्वपूर्ण भागों में स्पष्ट और मुड़ते भागों में मुलायम किनारे रखें / Use clear edges in important areas and softer edges where the form turns. Edge variety controls both form and attention. Choose edges according to form direction and focal emphasis in exams.

Step 3

Exam Tip

किनारे की विविधता रूप और ध्यान दोनों को नियंत्रित करती है। परीक्षा में वस्तु की दिशा और केंद्र बिंदु के अनुसार किनारे चुनें।

Open Question Page
Ask Friends

रंग भरते समय एक कार्यशील किनारा बनाए रखने के लिए कौन-सा क्रम सही है?

Which sequence is correct for maintaining a working edge while filling colour?

Explanation opens after your attempt
Correct Answer

B. नए स्ट्रोक को पिछले नम किनारे से हल्का ओवरलैप करते हुए तुरंत आगे बढ़नाMove forward promptly while slightly overlapping the previous damp edge

Step 1

Concept

Strokes joined to a damp edge create an even surface. Avoid unnecessary pauses during large fills in exams.

Step 2

Why this answer is correct

The correct answer is B. नए स्ट्रोक को पिछले नम किनारे से हल्का ओवरलैप करते हुए तुरंत आगे बढ़ना / Move forward promptly while slightly overlapping the previous damp edge. Strokes joined to a damp edge create an even surface. Avoid unnecessary pauses during large fills in exams.

Step 3

Exam Tip

नम किनारे से जुड़ते स्ट्रोक समान सतह बनाते हैं। परीक्षा में बड़े भराव के दौरान बिना अनावश्यक विराम काम करें।

Open Question Page
Ask Friends

दो रंगों के बीच संक्रमण में मध्य रंग बहुत अधिक दिखाई दे रहा है। इसका दृश्य प्रभाव क्या होगा?

The middle colour is too dominant in a transition between two colours. What will be the visual effect?

Explanation opens after your attempt
Correct Answer

C. दोनों सिरों का अंतर कमजोर होकर मिश्रण सपाट लग सकता हैThe difference between both ends may weaken and the blend may look flat

Step 1

Concept

An overly broad middle colour reduces contrast between the two ends. Keep transition proportions balanced in exams.

Step 2

Why this answer is correct

The correct answer is C. दोनों सिरों का अंतर कमजोर होकर मिश्रण सपाट लग सकता है / The difference between both ends may weaken and the blend may look flat. An overly broad middle colour reduces contrast between the two ends. Keep transition proportions balanced in exams.

Step 3

Exam Tip

बहुत विस्तृत मध्य रंग हल्के और गहरे या गर्म और ठंडे सिरों का विरोध कम करता है। परीक्षा में संक्रमण का अनुपात संतुलित रखें।

Open Question Page
Ask Friends

किसी रंग क्षेत्र में ऊपर से नीचे समान टोन चाहिए लेकिन कागज झुका होने के कारण रंग नीचे जमा हो रहा है। क्या करें?

An equal tone is required from top to bottom but paint pools below because the paper is tilted. What should be done?

Explanation opens after your attempt
Correct Answer

D. सतह का झुकाव कम करना और जमा रंग समय पर उठानाReduce the surface tilt and lift accumulated paint in time

Step 1

Concept

Excess tilt pulls liquid downward and makes the tone uneven. Control surface angle according to the wash in exams.

Step 2

Why this answer is correct

The correct answer is D. सतह का झुकाव कम करना और जमा रंग समय पर उठाना / Reduce the surface tilt and lift accumulated paint in time. Excess tilt pulls liquid downward and makes the tone uneven. Control surface angle according to the wash in exams.

Step 3

Exam Tip

अधिक झुकाव द्रव को नीचे खींचता है और टोन असमान बनाता है। परीक्षा में वॉश के अनुसार सतह कोण नियंत्रित करें।

Open Question Page
Ask Friends

रंग भराव में विभिन्न क्षेत्रों की सीमाएं साफ हैं लेकिन पूरी रचना असंबद्ध लगती है। एकता बढ़ाने का उपाय क्या है?

The boundaries of different colour areas are clean but the whole composition feels disconnected. How can unity be increased?

Explanation opens after your attempt
Correct Answer

A. कुछ रंगों टोन या संक्रमण गुणों को विभिन्न क्षेत्रों में दोहरानाRepeat selected colours tones or transition qualities across different areas

Step 1

Concept

Controlled colour repetition visually connects separate areas. Maintain colour unity along with variety in exams.

Step 2

Why this answer is correct

The correct answer is A. कुछ रंगों टोन या संक्रमण गुणों को विभिन्न क्षेत्रों में दोहराना / Repeat selected colours tones or transition qualities across different areas. Controlled colour repetition visually connects separate areas. Maintain colour unity along with variety in exams.

Step 3

Exam Tip

नियंत्रित रंग दोहराव अलग भागों को दृश्य रूप से जोड़ता है। परीक्षा में विविधता के साथ रंग एकता रखें।

Open Question Page
Ask Friends

यदि पृष्ठभूमि के रंग मुख्य विषय से अधिक चमकीले और तीव्र हों तो कौन-सी समस्या होगी?

What problem will occur if background colours are brighter and more intense than the main subject?

Explanation opens after your attempt
Correct Answer

B. ध्यान पृष्ठभूमि की ओर जा सकता हैAttention may shift toward the background

Step 1

Concept

More intense colours attract attention. Plan the intensity of the main subject and background in exams.

Step 2

Why this answer is correct

The correct answer is B. ध्यान पृष्ठभूमि की ओर जा सकता है / Attention may shift toward the background. More intense colours attract attention. Plan the intensity of the main subject and background in exams.

Step 3

Exam Tip

अधिक तीव्र रंग दृष्टि को आकर्षित करते हैं। परीक्षा में मुख्य विषय और पृष्ठभूमि की तीव्रता योजनाबद्ध रखें।

Open Question Page
Ask Friends

एक पारदर्शी परत सूखने पर दागदार दिखाई दे रही है। कौन-सा कारण सबसे संभावित है?

A transparent layer looks blotchy after drying. What is the most likely cause?

Explanation opens after your attempt
Correct Answer

C. ब्रश लोडिंग और स्ट्रोक ओवरलैप असमान थेBrush loading and stroke overlap were uneven

Step 1

Concept

Uneven layers are easily visible in transparent colour. Keep loading and overlap consistent in exams.

Step 2

Why this answer is correct

The correct answer is C. ब्रश लोडिंग और स्ट्रोक ओवरलैप असमान थे / Brush loading and stroke overlap were uneven. Uneven layers are easily visible in transparent colour. Keep loading and overlap consistent in exams.

Step 3

Exam Tip

पारदर्शी रंग में असमान परत आसानी से दिखाई देती है। परीक्षा में लोडिंग और ओवरलैप नियमित रखें।

Open Question Page
Ask Friends

एक वस्तु का हाइलाइट बहुत फैला हुआ है और चमक कमजोर लगती है। कौन-सा सुधार उचित है?

The highlight on an object is too spread out and the shine appears weak. What correction is appropriate?

Explanation opens after your attempt
Correct Answer

D. हाइलाइट को छोटा साफ और अधिक नियंत्रित बनानाMake the highlight smaller cleaner and more controlled

Step 1

Concept

A small clear highlight shows a focused reflection of light. Control edges for shiny surfaces in exams.

Step 2

Why this answer is correct

The correct answer is D. हाइलाइट को छोटा साफ और अधिक नियंत्रित बनाना / Make the highlight smaller cleaner and more controlled. A small clear highlight shows a focused reflection of light. Control edges for shiny surfaces in exams.

Step 3

Exam Tip

छोटा स्पष्ट हाइलाइट केंद्रित प्रकाश प्रतिबिंब दिखाता है। परीक्षा में चमकदार सतह के लिए किनारे नियंत्रित रखें।

Open Question Page
Ask Friends

किसी क्षेत्र में रंग की पहली परत असमान है। दूसरी परत लगाने से पहले क्या करना सबसे उचित है?

The first colour layer in an area is uneven. What is the most appropriate step before applying a second layer?

Explanation opens after your attempt
Correct Answer

A. पहली परत को पूरी तरह सूखने देना और फिर पतली नियंत्रित परत लगानाLet the first layer dry fully and then apply a thin controlled layer

Step 1

Concept

A controlled second layer over a dry first layer can correct unevenness. Avoid overworking a wet surface in exams.

Step 2

Why this answer is correct

The correct answer is A. पहली परत को पूरी तरह सूखने देना और फिर पतली नियंत्रित परत लगाना / Let the first layer dry fully and then apply a thin controlled layer. A controlled second layer over a dry first layer can correct unevenness. Avoid overworking a wet surface in exams.

Step 3

Exam Tip

सूखी पहली परत पर नियंत्रित दूसरी परत असमानता सुधार सकती है। परीक्षा में गीली सतह को अधिक न छेड़ें।

Open Question Page
Ask Friends

एक मिश्रित रंग आवश्यकता से अधिक गर्म दिखाई दे रहा है। उसे संतुलित करने का सही तरीका क्या है?

A mixed colour appears warmer than required. What is the correct way to balance it?

Explanation opens after your attempt
Correct Answer

B. उपयुक्त ठंडे रंग की थोड़ी मात्रा मिलाकर परीक्षण करनाAdd a small amount of a suitable cool colour and test it

Step 1

Concept

A small amount of a cool colour can balance the mixture temperature. Add colour gradually and test it in exams.

Step 2

Why this answer is correct

The correct answer is B. उपयुक्त ठंडे रंग की थोड़ी मात्रा मिलाकर परीक्षण करना / Add a small amount of a suitable cool colour and test it. A small amount of a cool colour can balance the mixture temperature. Add colour gradually and test it in exams.

Step 3

Exam Tip

थोड़ा ठंडा रंग मिश्रण के तापमान को संतुलित कर सकता है। परीक्षा में रंग धीरे-धीरे जोड़कर जांचें।

Open Question Page
Ask Friends

यदि किसी दूर की वस्तु में बहुत गहरे तीव्र रंग और कठोर किनारे हों तो वह कैसी दिखाई दे सकती है?

How may a distant object appear if it has very dark intense colours and hard edges?

Explanation opens after your attempt
Correct Answer

C. अपेक्षा से पास और प्रमुखCloser and more prominent than intended

Step 1

Concept

Intense colours and hard edges suggest nearness. Reduce colour intensity and clarity with distance in exams.

Step 2

Why this answer is correct

The correct answer is C. अपेक्षा से पास और प्रमुख / Closer and more prominent than intended. Intense colours and hard edges suggest nearness. Reduce colour intensity and clarity with distance in exams.

Step 3

Exam Tip

तीव्र रंग और कठोर किनारे निकटता का संकेत देते हैं। परीक्षा में दूरी के साथ रंग तीव्रता और स्पष्टता घटाएं।

Open Question Page
Ask Friends

रंगों की परतों से गहराई बनाते समय हर नई परत को पूरी तरह अपारदर्शी रखने से क्या समस्या होगी?

What problem will occur if every new layer is kept fully opaque while building depth through colour layers?

Explanation opens after your attempt
Correct Answer

D. नीचे की परतें ढक जाएंगी और परतदार गहराई कम होगीLower layers will be covered and layered depth will decrease

Step 1

Concept

Some transparency is needed for layered depth. Understand the difference between glazing and opaque filling in exams.

Step 2

Why this answer is correct

The correct answer is D. नीचे की परतें ढक जाएंगी और परतदार गहराई कम होगी / Lower layers will be covered and layered depth will decrease. Some transparency is needed for layered depth. Understand the difference between glazing and opaque filling in exams.

Step 3

Exam Tip

परतदार गहराई के लिए कुछ पारदर्शिता आवश्यक होती है। परीक्षा में ग्लेजिंग और अपारदर्शी भराव का अंतर समझें।

Open Question Page
Ask Friends

रंग भरने के अभ्यास में दबाव का प्रभाव जांचना हो तो उचित प्रयोग कौन-सा है?

Which is the correct experiment for studying the effect of pressure in colour filling?

Explanation opens after your attempt
Correct Answer

A. ब्रश रंग नमी और गति समान रखकर केवल दबाव बदलनाKeep brush colour moisture and speed constant while changing only pressure

Step 1

Concept

Changing one variable at a time makes its effect clear. Remember the principle of controlled practice in exams.

Step 2

Why this answer is correct

The correct answer is A. ब्रश रंग नमी और गति समान रखकर केवल दबाव बदलना / Keep brush colour moisture and speed constant while changing only pressure. Changing one variable at a time makes its effect clear. Remember the principle of controlled practice in exams.

Step 3

Exam Tip

एक समय में एक चर बदलने से उसका प्रभाव स्पष्ट होता है। परीक्षा में नियंत्रित अभ्यास का सिद्धांत याद रखें।

Open Question Page
Ask Friends

दो अभ्यास नमूनों में रंग समान था लेकिन एक में अधिक पानी और दूसरे में कम पानी था। किस गुण की तुलना की जा सकती है?

The colour was the same in two practice samples but one had more water and the other less. Which property can be compared?

Explanation opens after your attempt
Correct Answer

B. पारदर्शिता प्रवाह और रंग सांद्रताTransparency flow and colour concentration

Step 1

Concept

Water quantity affects colour flow transparency and depth. Identify the effects of mixture ratio in exams.

Step 2

Why this answer is correct

The correct answer is B. पारदर्शिता प्रवाह और रंग सांद्रता / Transparency flow and colour concentration. Water quantity affects colour flow transparency and depth. Identify the effects of mixture ratio in exams.

Step 3

Exam Tip

पानी की मात्रा रंग के प्रवाह पारदर्शिता और गहराई को प्रभावित करती है। परीक्षा में मिश्रण अनुपात के प्रभाव पहचानें।

Open Question Page
Ask Friends

एक जटिल आकृति को भरते समय छोटे और बड़े दोनों क्षेत्र हैं। सबसे प्रभावी रणनीति क्या है?

A complex shape contains both small and large areas. What is the most effective filling strategy?

Explanation opens after your attempt
Correct Answer

C. सीमाओं और छोटे भागों में छोटा ब्रश तथा खुले बड़े भागों में चौड़ा ब्रश प्रयोग करनाUse a small brush for boundaries and details and a broad brush for large open areas

Step 1

Concept

Changing brush size according to the task provides both speed and control. Fill boundaries first and open areas afterward in exams.

Step 2

Why this answer is correct

The correct answer is C. सीमाओं और छोटे भागों में छोटा ब्रश तथा खुले बड़े भागों में चौड़ा ब्रश प्रयोग करना / Use a small brush for boundaries and details and a broad brush for large open areas. Changing brush size according to the task provides both speed and control. Fill boundaries first and open areas afterward in exams.

Step 3

Exam Tip

कार्य के अनुसार ब्रश आकार बदलने से गति और नियंत्रण दोनों मिलते हैं। परीक्षा में पहले सीमा फिर खुला क्षेत्र भरें।

Open Question Page
Ask Friends

एक चित्र में रंगों का दोहराव है लेकिन दृश्य लय यांत्रिक लगती है। सुधार कैसे होगा?

Colours repeat in a painting but the visual rhythm appears mechanical. How can it be improved?

Explanation opens after your attempt
Correct Answer

D. रंग आकार अंतराल या तीव्रता में नियंत्रित विविधता जोड़करAdd controlled variation in colour size spacing or intensity

Step 1

Concept

Controlled variation makes rhythm lively and reduces monotony. Balance repetition and variety in exams.

Step 2

Why this answer is correct

The correct answer is D. रंग आकार अंतराल या तीव्रता में नियंत्रित विविधता जोड़कर / Add controlled variation in colour size spacing or intensity. Controlled variation makes rhythm lively and reduces monotony. Balance repetition and variety in exams.

Step 3

Exam Tip

नियंत्रित विविधता लय को जीवंत बनाती है और एकरसता कम करती है। परीक्षा में दोहराव और विविधता का संतुलन रखें।

Open Question Page
Ask Friends

एक ब्लेंडेड पृष्ठभूमि मुख्य विषय के किनारों में घुस गई है। अगली बार इसे रोकने के लिए क्या करना चाहिए?

A blended background has entered the edges of the main subject. What should be done next time to prevent this?

Explanation opens after your attempt
Correct Answer

A. मुख्य विषय की सीमा के पास नमी कम रखकर छोटे नियंत्रित स्ट्रोक लगानाKeep moisture lower near the subject boundary and use small controlled strokes

Step 1

Concept

Lower moisture and small strokes control spreading near a boundary. Use different handling for open areas and edges in exams.

Step 2

Why this answer is correct

The correct answer is A. मुख्य विषय की सीमा के पास नमी कम रखकर छोटे नियंत्रित स्ट्रोक लगाना / Keep moisture lower near the subject boundary and use small controlled strokes. Lower moisture and small strokes control spreading near a boundary. Use different handling for open areas and edges in exams.

Step 3

Exam Tip

कम नमी और छोटे स्ट्रोक सीमा पर फैलाव को नियंत्रित करते हैं। परीक्षा में खुले क्षेत्र और सीमा के लिए अलग तकनीक रखें।

Open Question Page
Ask Friends

रंग भरने और ब्लेंडिंग के अंतिम मूल्यांकन में कौन-सा मानदंड सबसे व्यापक है?

Which criterion is most comprehensive in the final evaluation of colour filling and blending?

Explanation opens after your attempt
Correct Answer

B. रंग की समानता किनारा नियंत्रण टोन संक्रमण सतह माध्यम और चित्र के उद्देश्य का संयुक्त प्रभावThe combined effect of colour evenness edge control tonal transition surface medium and pictorial purpose

Step 1

Concept

Successful colour filling and blending combine technical control with the purpose of the painting. Evaluate the complete visual effect in exams.

Step 2

Why this answer is correct

The correct answer is B. रंग की समानता किनारा नियंत्रण टोन संक्रमण सतह माध्यम और चित्र के उद्देश्य का संयुक्त प्रभाव / The combined effect of colour evenness edge control tonal transition surface medium and pictorial purpose. Successful colour filling and blending combine technical control with the purpose of the painting. Evaluate the complete visual effect in exams.

Step 3

Exam Tip

सफल रंग भराव और ब्लेंडिंग तकनीकी नियंत्रण के साथ चित्र के उद्देश्य को भी पूरा करते हैं। परीक्षा में पूरे दृश्य प्रभाव को परखें।

Open Question Page
Ask Friends
FAQs

Class 9 Art Education Quiz FAQs

How many questions are in this quiz?

This level is designed for 50 active questions. Currently 50 questions are available for the selected class and difficulty.

Is there a timer in this quiz?

Yes, the timer uses 30 seconds per question for Hard difficulty and shows the total remaining time on the page.

Can I open each question separately?

Yes, every question has its own SEO-friendly page with answer, explanation and related practice links.