Humidity, evaporation, and condensation

Correct answer: A. Evaporation adds moisture and cooling causes condensation

Answer: A, evaporation adds moisture and cooling can cause condensation. Begin with the water cycle: heat supplies energy to liquid water at a surface, and some of it changes into water vapour by evaporation. The amount of vapour present in air is related to humidity. If moist air cools, its capacity to hold vapour decreases. When the air reaches saturation, often at its dew point, excess vapour changes into tiny liquid droplets or ice crystals; this is condensation. Thus the useful sequence is: evaporation adds vapour, humidity describes the moisture condition, and cooling to saturation produces condensation. A is correct and gives the essential relationship. B is wrong because condensation does not always come first and water can evaporate again. C is wrong because humidity specifically concerns water vapour. D is wrong because evaporation occurs wherever liquid or solid water can gain energy, not only in the Himalayas. A helpful caution is that evaporation and condensation may occur simultaneously, but the basic exam chain remains moisture addition followed by cooling and condensation.

Correct answer: A. Ratio of actual water vapour to saturation capacity

Answer: A, the ratio of actual water vapour to the saturation capacity of air. Relative humidity compares the moisture actually present with the maximum moisture the air could hold at the same temperature. It is expressed as a percentage: relative humidity = actual water vapour content divided by saturation capacity, multiplied by 100. For example, if air contains half of the vapour it could hold at that temperature, its relative humidity is 50 percent. The comparison must be made at the same temperature because warm and cool air have different holding capacities. A is correct because it states this comparison. B is wrong because wind speed describes motion, not moisture content. C is wrong because rainfall is a form of precipitation and is not the definition of relative humidity. D is wrong because cloud height is a positional measurement. Relative humidity may rise when air cools even if no water is added, since the saturation capacity becomes smaller. Memory cue: relative means actual moisture compared with possible moisture at that temperature.

Correct answer: B. It increases

Answer: B, relative humidity generally increases. Relative humidity compares the actual amount of water vapour with the air's saturation capacity at a particular temperature. When temperature falls but the actual vapour remains unchanged, the air's capacity to hold vapour becomes smaller. The same amount of vapour therefore represents a larger percentage of the available capacity. If cooling continues until the air reaches its dew point, relative humidity becomes 100 percent and condensation may begin. B is correct because it follows directly from this comparison. A is wrong because cooling does not normally increase the holding capacity; it reduces it. C is wrong because cooling does not remove all moisture or make the percentage zero. D is wrong because the denominator, or saturation capacity, changes with temperature even when actual vapour stays constant. A common confusion is to think that unchanged vapour means unchanged relative humidity. It does not: relative humidity depends on both vapour content and temperature. Memory cue: same moisture plus cooler air means a fuller, more humid percentage.

Correct answer: A. Amount of water vapour per unit volume of air

Answer: A, the amount of water vapour per unit volume of air. Absolute humidity measures the actual mass of water vapour present in a given volume of air. It is commonly expressed in grams per cubic metre, written as g/m³. To understand it, take a definite volume of air, determine how much water vapour it contains, and divide the mass of vapour by that volume. Unlike relative humidity, absolute humidity is not a comparison with the maximum possible moisture capacity at the same temperature. A is correct because it states the quantity-per-volume meaning. B is wrong because cloud number and air pressure do not define water vapour mass. C is wrong because it mixes temperature with rainfall and uses no volume of air. D is wrong because wind direction is a movement measurement, not a moisture measurement. A useful exam warning is not to confuse absolute humidity with specific humidity: absolute humidity is commonly linked with mass per unit volume, while specific humidity is mass of water vapour per unit mass of moist air. Memory cue: absolute humidity asks, 'How much vapour is actually in this volume?'

Correct answer: A. Mass of water vapour per unit mass of total air

Answer: A, the mass of water vapour per unit mass of total moist air. To understand this, remember that air is a mixture of gases and may contain a variable amount of invisible water vapour. Specific humidity compares the mass of that vapour with the total mass of the air sample, including the vapour. It is usually expressed as grams of water vapour per kilogram of moist air. Unlike relative humidity, it does not directly compare the present vapour with the maximum possible amount at a temperature. A is correct because it gives the definition. B describes rainfall intensity, not humidity. C describes salinity. D describes a cloud’s size, not the water vapour mixed with air. Memory cue: “specific” points to a specific mass of air.

Correct answer: B. Water absorbs heat and changes into vapour

Answer: B. During evaporation, some liquid-water molecules at the surface gain enough energy to escape into the air as vapour. The energy needed for this change of state is absorbed from the surroundings and is called latent heat of vaporisation. It is called “latent” because the energy changes the state without necessarily raising the temperature while the phase change occurs. Since the surroundings lose energy, evaporation can produce a cooling effect, as with sweating. A describes heat release and freezing, which is the opposite direction. C is not the definition of evaporation. D incorrectly links cloud movement with latent heat. Memory cue: evaporation takes energy; condensation gives energy back.

Correct answer: A. Because warm air has greater moisture-holding capacity

Answer: A. Temperature affects the amount of water vapour that air can contain before reaching saturation. When temperature rises, the saturation capacity of air increases, so warm air can contain more vapour than cold air before condensation begins. This does not mean that every parcel of warm air actually contains more vapour; it means its possible capacity is greater. A is therefore the correct general explanation. B is false because dust is not the basic reason for the temperature–capacity relationship. C is false because warm air is generally less dense than cold air at the same pressure, not always heavier. D is false because warm air still contains oxygen. Memory cue: warmer air has a larger moisture “capacity,” while cooling brings air closer to saturation.

Correct answer: A. Air is saturated

Answer: A, the air is saturated. Relative humidity compares the actual amount of water vapour in air with the maximum amount the air can hold at the same temperature, expressed as a percentage. A value of 100% means the actual vapour content has reached that temperature-dependent capacity. It does not necessarily mean that the air contains the same absolute amount of moisture as air at another temperature. Cooling or adding more vapour may then lead to condensation, although rainfall is not guaranteed. B is the opposite of saturation. C is wrong because relative humidity does not tell us that rain has stopped. D is wrong because 100% relative humidity can occur at many temperatures. Memory cue: 100% means full capacity, not zero moisture or zero temperature.

Correct answer: C. High relative humidity

Answer: C, high relative humidity. Evaporation occurs when water molecules leave a surface and enter the air. If the surrounding air already contains a large amount of water vapour, it has less capacity to accept additional vapour, so evaporation becomes slower. Strong wind usually removes moist air from above the surface and speeds evaporation. Low relative humidity means the air is relatively dry and can accept more vapour, also favouring faster evaporation. Higher temperature generally gives surface molecules more energy and increases evaporation, when other conditions are comparable. Therefore C is the only slowing factor among these choices. Memory cue: dry, warm and windy conditions usually dry water faster; humid air slows the process.

Correct answer: B. More sultry or humid

Answer: B, more sultry or humid. The body cools partly when sweat evaporates from the skin. When the air already contains a high amount of water vapour, especially when relative humidity is high, evaporation from the skin becomes slower. Sweat may remain on the skin, but less of it changes into vapour quickly, so the body loses heat less effectively. The weather can therefore feel sticky, oppressive or sultry, even if the measured air temperature is not extremely high. A is wrong because moisture-rich air does not feel dry. C is unrelated to high water vapour in ordinary warm-weather conditions. D refers to dust, not humidity. The exact feeling also depends on temperature, wind and clothing, but humidity is the key factor in this question. Memory cue: humid air slows sweat evaporation and feels sticky.

Correct answer: B. It will decrease

Correct answer: B, it will decrease. Relative humidity tells us how much water vapour is actually present compared with the maximum vapour the air can hold at that temperature. The relationship is: relative humidity = actual vapour pressure ÷ saturation vapour pressure × 100. Here, the actual vapour pressure stays unchanged, while the saturation vapour pressure, which is the denominator, becomes larger. Therefore the ratio becomes smaller and relative humidity decreases. For example, if actual vapour pressure is 10 units and saturation vapour pressure rises from 20 to 25 units, humidity falls from 50% to 40%. A is wrong because the numerator has not increased. C is wrong because relative humidity cannot become negative. D is wrong because 100% occurs only when actual and saturation vapour pressures are equal. Memory cue: same actual moisture plus greater holding capacity means lower relative humidity.

Correct answer: A. Condensation

Correct answer: A, condensation. The dew point is the temperature to which air must be cooled for it to become saturated with its existing water vapour, assuming the pressure and moisture content are considered appropriately. If the air cools to or below this point, it cannot hold all the vapour in the gaseous form. The excess vapour changes into tiny liquid droplets or, under freezing conditions, ice. This is condensation and may contribute to dew, fog or clouds. B is wrong because cooling below the dew point does not produce a sharp rise in evaporation; it favours condensation. C is wrong because humidity is not absent; the air has enough moisture to reach saturation. D is wrong because transparency is not the defining result. Memory cue: reaching the dew point means vapour begins to leave the air as droplets.

Correct answer: A. Sweat takes heat from the body and becomes vapour

Correct answer: A. Evaporation is a change from liquid water to water vapour, and this change requires energy called latent heat. When sweat evaporates from the skin, it takes the required energy from the skin and nearby body surface. The loss of heat lowers the skin’s temperature, so the body feels cooler. This cooling is more effective when air is dry or moving because vapour is removed from near the skin and evaporation can continue. B is wrong because evaporation removes heat from the body rather than adding it. C is wrong because making air heavy is not the mechanism of cooling. D is wrong because sweat does not block sunlight; the cooling comes from heat used during evaporation. In very humid air, sweat may evaporate slowly, so the cooling effect is weaker. Memory cue: evaporation takes heat away.

Correct answer: A. Radiational cooling of the ground increases

Correct answer: A. After sunset, the ground loses heat by emitting terrestrial radiation. A clear sky generally allows this outgoing energy to escape more readily than a cloudy sky, so the ground and objects near it can cool strongly. If a surface cools to the dew point of the nearby air, water vapour condenses on it as dew, provided suitable moisture is present and the temperature is not low enough for frost instead. B is wrong because there is no solar heating during the cold night. C is unrelated to the formation of dew on land surfaces. D is wrong because a clear sky does not guarantee that wind always becomes warm; calm, light-wind conditions often favour dew by allowing surface cooling. Memory cue: clear night lets the ground lose heat, and a cool surface can collect dew.

Correct answer: A. Evapotranspiration

Correct answer: A, evapotranspiration. Evaporation is the change of liquid water into water vapour from surfaces such as lakes, rivers, soil, and wet ground. Transpiration is the release of water vapour from plants, mainly through tiny openings in their leaves. When these two water losses are considered together, the process is called evapotranspiration. Step by step: water reaches a surface or plant, heat supplies energy, and water vapour enters the atmosphere. Option A is correct because it combines evaporation and plant transpiration and is an important part of the water cycle. B, glaciation, means the formation or growth of glaciers and is not the combined loss of water vapour from land and plants. C, tidal friction, is related to the slowing of rotational motion by tides, not atmospheric moisture. D, seismic activity concerns earthquakes and earth movements. Memory cue: “evaporation plus vegetation equals evapotranspiration.”

Correct answer: A. When temperature rises

Correct answer: A, when temperature rises. Relative humidity is the amount of water vapour actually present compared with the maximum amount the air could hold at the same temperature, expressed as a percentage. If the actual vapour amount stays constant but air warms, its moisture-holding capacity increases. The same vapour then represents a smaller percentage of the possible amount, so relative humidity decreases. B is wrong because cooling reduces capacity and usually raises relative humidity when vapour amount is unchanged. C is wrong because at the dew point the air reaches saturation, so relative humidity is about 100 percent. D is wrong because saturated air also has relative humidity of about 100 percent, not a decrease. A simple example is a warm afternoon: the air may contain the same water vapour as earlier, yet its relative humidity can be lower. Do not confuse relative humidity with the actual amount of vapour.

Correct answer: A. Because it affects clouds, rainfall, and humidity

Correct answer: A. Water vapour is a major atmospheric moisture component and participates continuously in weather processes. First, water enters the air through evaporation and transpiration. When moist air cools, water vapour may condense into tiny droplets or ice particles, helping clouds form. Further growth of these particles can produce precipitation such as rain, snow, or other forms. The amount of vapour also affects humidity and the feeling of dampness. B is incorrect because Earth’s rotation is not stopped by water vapour. C is incorrect because mountain building is mainly associated with tectonic and geological processes, not atmospheric moisture. D is incorrect because water vapour does not solidify oceans. Thus A connects the correct chain: vapour, humidity, condensation, clouds, and precipitation. Memory cue: “vapour supplies the moisture; cooling makes clouds; cloud growth can bring precipitation.”

Correct answer: A. Extra vapour may condense

Correct answer: A, extra vapour may condense. Saturated air contains approximately the maximum water vapour it can hold at its current temperature. If more vapour is supplied, the air cannot keep all of it in gaseous form under the same conditions. The excess may change into tiny liquid droplets or ice crystals; this change from vapour to liquid or solid water is condensation. Such condensation can contribute to dew, fog, clouds, or precipitation, depending on the conditions. B is wrong because adding moisture does not make saturated air dry. C is wrong because saturation does not mean temperature must become zero; saturation can occur at many temperatures. D is wrong because condensation does not turn water into rock, and evaporation is not described that way. The word “may” is important because the exact visible result depends on temperature and other atmospheric conditions. Memory cue: saturated air is “full”; extra moisture must come out by condensation.

Correct answer: A. Strong wind removes moist air near the surface and increases evaporation

Correct answer: A. During evaporation, water molecules leave a wet surface and enter the air immediately above it. This nearby air quickly becomes moist. When wind moves across the surface, it removes or mixes away this moist layer and brings in air that is often drier and able to accept more water vapour. The vapour-pressure difference is therefore maintained, and evaporation generally increases. B is wrong because ordinary stronger wind does not always stop evaporation; it usually promotes it, although unusual conditions can affect the exact rate. C is wrong because wind speed is a recognized factor affecting evaporation. D is wrong because low wind usually allows moist air to remain near the surface and does not always cause more evaporation. Other factors, including temperature, exposed surface area, and humidity, also matter. Memory cue: wind “clears the damp layer” above water, helping more molecules escape.

Correct answer: A. (RH = Actual vapour pressure / Saturation vapour pressure) × 100 / (RH = Actual vapour pressure / Saturation vapour pressure) × 100

Correct answer: A. Relative humidity compares the water vapour actually present in air with the maximum vapour pressure possible at the same temperature, called saturation vapour pressure. The comparison is written as a ratio and multiplied by 100 because relative humidity is expressed as a percentage: RH = (actual vapour pressure ÷ saturation vapour pressure) × 100. If actual and saturation vapour pressures are equal, the air is saturated and RH is 100 percent. B is wrong because wind speed is not the numerator–denominator comparison that defines humidity. C is wrong because rainfall and temperature are not added to obtain relative humidity. D is wrong because cloud height divided by pressure is not the humidity formula. A common confusion is to omit the ×100 and obtain a decimal ratio instead of a percentage. Remember: actual moisture compared with possible moisture, multiplied by 100.

Correct answer: B. Condensation

Correct answer: B, condensation. Saturated air already contains nearly the maximum water vapour possible at its current temperature. When temperature falls further, the air’s capacity to hold water vapour decreases. If the existing vapour amount cannot remain entirely gaseous, some vapour changes into liquid droplets or ice crystals; this is condensation. Depending on where and how it occurs, it can help produce dew, fog, clouds, or precipitation. A is wrong because evaporation changes liquid water into vapour and is generally favoured by warmth and unsaturated air, not by cooling saturated air. C, salinization, is the accumulation of salts in soil or water and is unrelated to this atmospheric change. D, friction, is resistance between moving surfaces and does not describe vapour changing state. The key sequence is: saturation, cooling, reduced holding capacity, then condensation. Memory cue: “saturated plus cooling gives condensation.”

Correct answer: A. High temperature and low humidity

Correct answer: A, high temperature and low humidity. Evaporation occurs when liquid water molecules gain enough energy to escape into the air. Strong daytime heating in desert regions gives surface water more energy, so evaporation tends to increase. Desert air is also commonly dry, meaning its relative humidity is low and it has a greater capacity to receive additional water vapour. These two conditions work together: heat supplies energy and dry air maintains a moisture deficit. B is wrong because low temperature supplies less energy and high humidity reduces the capacity of air to accept more vapour. C is wrong because continuous snowfall is not the typical reason for rapid daytime desert evaporation. D is wrong because dense vegetation is not the defining desert condition and can instead influence moisture through shade and transpiration. The exact rate also depends on wind, exposed water, and available moisture. Memory cue: “hot surface plus thirsty air means faster evaporation.”

Correct answer: A. जरूरी नहीं कि बहुत अधिक हो

Correct answer: A. Relative humidity is the amount of water vapour actually present compared with the maximum amount the air could hold at the same temperature, usually expressed as a percentage. Warm air can hold more water vapour before reaching saturation than cold air. Therefore, a hot place may contain a large absolute amount of vapour but still have moderate or even relatively low relative humidity if its moisture-holding capacity is much larger. Option A is correct because high actual vapour does not automatically mean that the air is close to saturation. Option B is wrong because 100% relative humidity occurs only when the air is saturated at that temperature, not simply whenever actual moisture is high. Option C is wrong because the presence of water vapour means relative humidity is not necessarily zero. Option D is physically impossible in the ordinary definition because relative humidity is not negative. A useful example is that the same amount of vapour can produce a higher relative humidity in cool air and a lower relative humidity in hot air. Memory cue: relative humidity depends on both moisture present and temperature-dependent capacity.

Correct answer: A. सुबह अधिक और दोपहर में कम

Correct answer: A. Relative humidity depends on the amount of water vapour present and on how much vapour the air can hold at its current temperature. During a typical day, temperature is lower in the early morning and higher in the afternoon. If the actual amount of water vapour changes little over that short period, the cooler morning air has a smaller moisture-holding capacity, so its relative humidity is higher. As the air warms during the day, its capacity increases, and the same amount of vapour represents a smaller percentage; relative humidity therefore tends to decrease, often reaching a lower value in the afternoon. Option A states this general pattern. Option B is wrong because afternoon relative humidity is not always 100 percent; saturation occurs only under particular conditions. Option C is wrong because ordinary air contains some moisture and relative humidity is not always zero. Option D is wrong because temperature strongly affects moisture-holding capacity and therefore relative humidity. The exact daily pattern can be modified by clouds, rain, wind, and changes in moisture, but the usual temperature-linked pattern is morning high and afternoon low. Memory cue: cooler air is closer to saturation; warmer air can hold more vapour.

Correct answer: A. सापेक्ष आर्द्रता अधिक होने पर हवा ओसांक के निकट होती है

Correct answer: A. Relative humidity tells us how close the air is to saturation at its current temperature. The dew point is the temperature to which air must be cooled, with its moisture content unchanged, for saturation and possible condensation to begin. When relative humidity is high, the air is already holding a large fraction of the maximum vapour it can hold at that temperature. Consequently, only a small amount of cooling is needed to reach the dew point, so the air temperature and dew-point temperature are close. When relative humidity is low, the gap between air temperature and dew point is generally larger because more cooling is needed before saturation. Option A correctly expresses this relationship. Option B is wrong because dew point is not always zero; it depends on the actual moisture content and can be above or below zero. Option C is wrong because dew point is directly related to moisture in the air. Option D is wrong because higher relative humidity makes condensation more possible after slight cooling, rather than impossible. A high dew point also indicates moist air, although dew point and relative humidity are different measurements. Memory cue: high relative humidity means a small temperature drop can reach the dew point.