Topic Wise MCQ

Geography Erosional and depositional landforms created by various agents MCQ Questions for Class 11 Science

Practice focused topic-wise MCQs with answers and explanations for quick revision and exam preparation.

Share

Start Erosional and depositional landforms created by various agents Topic Quiz

Difficulty select karke sirf is topic ke focused MCQs practice karein. Score, timer aur explanations student-friendly flow me milenge.

Topic Navigation

Continue Chapter Revision

Erosional and depositional landforms created by various agents Practice Questions

Showing 491-500 of 600 questions.

Search

हाइड्रॉलिक एक्शन तटीय गुफा निर्माण में कैसे मदद करता है?

How does hydraulic action help in sea cave formation?

Explanation opens after your attempt
Correct Answer

A. लहरों का दबाव दरारों में हवा और जल को संपीड़ित कर चट्टान को तोड़ता हैWave pressure compresses air and water in cracks and breaks rock

Step 1

Concept

Waves create pressure in cracks and break weak rock. This is important in the early development of sea caves.

Step 2

Why this answer is correct

The correct answer is A. लहरों का दबाव दरारों में हवा और जल को संपीड़ित कर चट्टान को तोड़ता है / Wave pressure compresses air and water in cracks and breaks rock. Waves create pressure in cracks and break weak rock. This is important in the early development of sea caves.

Step 3

Exam Tip

लहरें दरारों में दबाव पैदा कर कमजोर चट्टान को तोड़ती हैं। यह समुद्री गुफा के आरंभिक विकास में महत्वपूर्ण है।

Open Question Page
Ask Friends

ढाल पर शीट वॉश से रिल बनने की प्रक्रिया क्या है?

What is the process from sheet wash to rill formation on a slope?

Explanation opens after your attempt
Correct Answer

A. फैला हुआ सतही बहाव छोटी धाराओं में केंद्रित होकर उथली नालियां काटता हैSpread surface flow becomes concentrated into small streams and cuts shallow channels

Step 1

Concept

When sheet flow concentrates into small paths, rills form. With further erosion, they may develop into gullies.

Step 2

Why this answer is correct

The correct answer is A. फैला हुआ सतही बहाव छोटी धाराओं में केंद्रित होकर उथली नालियां काटता है / Spread surface flow becomes concentrated into small streams and cuts shallow channels. When sheet flow concentrates into small paths, rills form. With further erosion, they may develop into gullies.

Step 3

Exam Tip

शीट फ्लो जब छोटे मार्गों में केंद्रित होता है तो रिल बनते हैं। आगे बढ़ने पर यही गली अपरदन बन सकता है।

Open Question Page
Ask Friends

मास वेस्टिंग और नदी अपरदन में व्यावहारिक अंतर क्या है?

What is the practical difference between mass wasting and river erosion?

Explanation opens after your attempt
Correct Answer

A. मास वेस्टिंग में गुरुत्व सीधे पदार्थ को ढाल पर खिसकाता है जबकि नदी अपरदन बहते जल से होता हैIn mass wasting gravity directly moves material downslope while river erosion is by flowing water

Step 1

Concept

In mass wasting, gravity is the main force and flowing water is not necessary. In river erosion, flowing water is the main agent.

Step 2

Why this answer is correct

The correct answer is A. मास वेस्टिंग में गुरुत्व सीधे पदार्थ को ढाल पर खिसकाता है जबकि नदी अपरदन बहते जल से होता है / In mass wasting gravity directly moves material downslope while river erosion is by flowing water. In mass wasting, gravity is the main force and flowing water is not necessary. In river erosion, flowing water is the main agent.

Step 3

Exam Tip

मास वेस्टिंग में गुरुत्व मुख्य बल है और बहता जल आवश्यक नहीं होता। नदी अपरदन में बहता जल मुख्य एजेंट है।

Open Question Page
Ask Friends

अल्यूवियल कोन और अल्यूवियल फैन में सामान्य अंतर क्या है?

What is the general difference between an alluvial cone and an alluvial fan?

Explanation opens after your attempt
Correct Answer

A. कोन अधिक तीखी ढाल और मोटे पदार्थ वाला होता है जबकि फैन अपेक्षाकृत फैला और मंद ढाल वाला होता हैCone has steeper slope and coarser material while fan is more spread out and gentler

Step 1

Concept

An alluvial cone is usually associated with steeper slope and coarser deposits. An alluvial fan is more spread out.

Step 2

Why this answer is correct

The correct answer is A. कोन अधिक तीखी ढाल और मोटे पदार्थ वाला होता है जबकि फैन अपेक्षाकृत फैला और मंद ढाल वाला होता है / Cone has steeper slope and coarser material while fan is more spread out and gentler. An alluvial cone is usually associated with steeper slope and coarser deposits. An alluvial fan is more spread out.

Step 3

Exam Tip

अल्यूवियल कोन आमतौर पर अधिक ढाल और मोटे निक्षेप से जुड़ा होता है। अल्यूवियल फैन अधिक फैलाव वाला निक्षेप है।

Open Question Page
Ask Friends

किस स्थिति में नदी का लैटरल कटाव अधःकटाव से अधिक प्रभावी हो जाता है?

Under which condition does lateral river erosion become more effective than downcutting?

Explanation opens after your attempt
Correct Answer

A. परिपक्व अवस्था में ढाल कम होने और बाढ़ मैदान विकसित होने परIn the mature stage when gradient decreases and floodplain develops

Step 1

Concept

On lower gradients, a river cuts its banks more and forms meanders. Downcutting is more dominant in the youthful stage.

Step 2

Why this answer is correct

The correct answer is A. परिपक्व अवस्था में ढाल कम होने और बाढ़ मैदान विकसित होने पर / In the mature stage when gradient decreases and floodplain develops. On lower gradients, a river cuts its banks more and forms meanders. Downcutting is more dominant in the youthful stage.

Step 3

Exam Tip

कम ढाल पर नदी किनारों को अधिक काटती है और विसर्प बनाती है। अधःकटाव युवा अवस्था में अधिक प्रमुख होता है।

Open Question Page
Ask Friends

समुद्र में तरंग कटाव और नदी डेल्टा निर्माण एक ही स्थान पर कैसे प्रतिस्पर्धा कर सकते हैं?

How can wave erosion and river delta building compete at the same place?

Explanation opens after your attempt
Correct Answer

A. नदी गाद जमा करती है और तरंगें उसी गाद को काटकर पुनर्वितरित करती हैंRiver deposits silt and waves erode and redistribute the same silt

Step 1

Concept

At the mouth, the river deposits sediment but waves can remove and spread it along the coast. Delta shape depends on this balance.

Step 2

Why this answer is correct

The correct answer is A. नदी गाद जमा करती है और तरंगें उसी गाद को काटकर पुनर्वितरित करती हैं / River deposits silt and waves erode and redistribute the same silt. At the mouth, the river deposits sediment but waves can remove and spread it along the coast. Delta shape depends on this balance.

Step 3

Exam Tip

मुहाने पर नदी निक्षेपण करती है पर तरंगें उसे हटाकर तट के साथ फैला सकती हैं। डेल्टा का आकार इसी संतुलन से प्रभावित होता है।

Open Question Page
Ask Friends

हिमानी और नदी घाटी में पार अनुप्रस्थ प्रोफाइल का अंतर क्यों होता है?

Why is the transverse profile different in glacial and river valleys?

Explanation opens after your attempt
Correct Answer

A. हिमनद पूरी घाटी तल और दीवारों को घिसता है जबकि नदी मुख्यतः तली में रेखीय कटाव करती हैA glacier abrades the whole valley floor and walls while a river mainly makes linear incision in the bed

Step 1

Concept

A glacier creates a broad U-shape and a river creates a narrow V-shaped valley. The difference comes from movement and contact area of the agents.

Step 2

Why this answer is correct

The correct answer is A. हिमनद पूरी घाटी तल और दीवारों को घिसता है जबकि नदी मुख्यतः तली में रेखीय कटाव करती है / A glacier abrades the whole valley floor and walls while a river mainly makes linear incision in the bed. A glacier creates a broad U-shape and a river creates a narrow V-shaped valley. The difference comes from movement and contact area of the agents.

Step 3

Exam Tip

हिमनद चौड़ा यू आकार बनाता है और नदी संकरी वी आकार घाटी बनाती है। एजेंट की गति और संपर्क क्षेत्र से अंतर पैदा होता है।

Open Question Page
Ask Friends

कार्स्ट स्थलरूपों में सतही जल निकासी कम विकसित क्यों होती है?

Why is surface drainage poorly developed in karst landscapes?

Explanation opens after your attempt
Correct Answer

A. जल दरारों और विलयन मार्गों से जल्दी भूमिगत चला जाता हैWater quickly goes underground through cracks and solution passages

Step 1

Concept

Limestone cracks are widened by solution. This allows surface water to enter underground drainage systems.

Step 2

Why this answer is correct

The correct answer is A. जल दरारों और विलयन मार्गों से जल्दी भूमिगत चला जाता है / Water quickly goes underground through cracks and solution passages. Limestone cracks are widened by solution. This allows surface water to enter underground drainage systems.

Step 3

Exam Tip

चूना पत्थर की दरारें विलयन से चौड़ी हो जाती हैं। इससे सतही जल भूमिगत तंत्र में प्रवेश करता है।

Open Question Page
Ask Friends

एजेंट और प्रक्रिया के आधार पर कौन सा युग्म सबसे सटीक है?

Which pair is most accurate based on agent and process?

Explanation opens after your attempt
Correct Answer

A. पवन डिफ्लेशन डेजर्ट पेवमेंटWind deflation desert pavement

Step 1

Concept

Desert pavement forms when fine particles are removed and coarse pebbles remain. It is a result of wind deflation.

Step 2

Why this answer is correct

The correct answer is A. पवन डिफ्लेशन डेजर्ट पेवमेंट / Wind deflation desert pavement. Desert pavement forms when fine particles are removed and coarse pebbles remain. It is a result of wind deflation.

Step 3

Exam Tip

डेजर्ट पेवमेंट महीन कण हटने के बाद मोटे कंकड़ों के बचे रहने से बनता है। यह पवन डिफ्लेशन का परिणाम है।

Open Question Page
Ask Friends

यदि एक क्षेत्र में सर्क एरेट हॉर्न और यू आकार घाटियां मिलती हैं तो सबसे उचित निष्कर्ष क्या होगा?

If cirques, arêtes, horns and U-shaped valleys occur in an area, what is the most appropriate conclusion?

Explanation opens after your attempt
Correct Answer

A. क्षेत्र में भूतपूर्व हिमानी अपरदन प्रभावी रहा हैFormer glacial erosion was effective in the area

Step 1

Concept

All these are mountain landforms related to glacial erosion. In exams, identify the agent by reading the landform group.

Step 2

Why this answer is correct

The correct answer is A. क्षेत्र में भूतपूर्व हिमानी अपरदन प्रभावी रहा है / Former glacial erosion was effective in the area. All these are mountain landforms related to glacial erosion. In exams, identify the agent by reading the landform group.

Step 3

Exam Tip

ये सभी हिमानी अपरदन से जुड़े पर्वतीय स्थलरूप हैं। परीक्षा में स्थलरूप समूह देखकर एजेंट पहचानें।

Open Question Page
Ask Friends