Watercolour

Correct answer: D. Excess water and pigment collected at the edges of the wash

Explanation: The governing concept is the drying behaviour of a watercolour wash. If a bead of water carrying pigment remains at the edge, evaporation draws the pigment toward that boundary. After drying, the accumulated pigment forms a darker line, often called a hard or backrun edge. Option D is correct. Very white paper does not cause the effect, and dilution alone is not the decisive problem unless excess liquid is left at the boundary.

Correct answer: C. Gently place a controlled darker grey on the damp surface

Explanation: The governing concept is a controlled wet-on-wet or damp-surface application. Placing a diluted darker grey only in the shadow area lets moisture soften its edges, producing a gradual, cloud-like transition while preserving the light paper and transparent character of watercolour. Option C is correct. Painting the entire cloud black destroys its value structure, scratching damages the paper, and oil is incompatible with the intended watercolour layer.

Correct answer: D. Gently try to lift the colour with a clean damp brush

Explanation: The governing concept is lifting, one of the corrective possibilities in watercolour. While the paint is still fresh or not fully dry, a clean, slightly damp brush can loosen and absorb some pigment from the highlight area. Option D is correct because it uses controlled moisture and minimal disturbance. Adding black worsens the mistake, flooding the whole area spreads pigment, and rubbing can roughen or damage the paper surface.

Correct answer: D. The colour may pool and spread uncontrollably

Explanation: The governing concept is watercolour flow on a wet surface. When excess pigment is placed on wet paper, the water carries it outward, while heavier pigment may collect in small pools or blooms. Therefore, option D is correct. Clean, sharp edges are more likely when the surface is dry or carefully controlled, so option A is not suitable; options B and C contradict the normal behaviour of wet watercolour. Apply colour gradually and observe the moisture level.

Correct answer: A. Check the drying effect and mixture value

Explanation: The governing concept is testing colour before committing it to the final painting. A small sample shows the pigment’s appearance, transparency, strength, and mixture value after drying, because watercolour often becomes lighter as water evaporates. Option A is correct. The other options do not describe any artistic purpose of a colour sample: it cannot increase paper weight, alter brush size, or erase a colour name. Sampling reduces mistakes and improves planning.

Correct answer: B. Mixtures remain pure

Explanation: The governing concept is preventing accidental colour contamination. One container is kept clean for diluting pigments and preparing fresh mixtures, while the other is used to rinse pigment from the brush. If the same dirty water is used for both purposes, unwanted pigment changes the hue and dulls the mixture. Thus option B is correct. Separate water does not directly dry paint, thicken paper, or enlarge a brush, so options A, C, and D are irrelevant.

Correct answer: C. After the base layer of the leaf dries

Explanation: The governing concept is controlling detail with a wet-on-dry application. After the leaf’s base layer dries, a fine brush can place narrow veins with controlled width and direction. Therefore, option C is correct. On a very wet background or during the first wash, pigment travels and delicate lines lose their clarity; before wetting the paper, there is no prepared leaf form to detail. Broad washes should be completed first, followed by fine details after drying.

Correct answer: D. The painting may look rigid and less natural

Explanation: The governing concept is edge variety in visual composition. Hard edges attract attention and clearly describe boundaries, while soft or lost edges suggest atmosphere, distance, and less important transitions. If every boundary is equally hard, the painting has no hierarchy of focus and may appear cut out, rigid, or less natural. Option D is correct. Uniform hard edges do not automatically lighten colours or increase distance, and they do not make the work softer.

Correct answer: A. Light areas may be difficult to recover later in watercolour

Explanation: The governing concept is value planning and preservation of the paper’s light areas. In transparent watercolour, white or pale regions are usually created by leaving the paper unpainted or by carefully lifting limited pigment; covering them with dark colour can be difficult to reverse. Option A is correct. Planning also establishes the contrast and focal hierarchy. It does not clean the brush, change paper size, or make watercolour oily, so B, C, and D are unrelated.

Correct answer: B. A dry band or uneven edge forms

Explanation: The governing concept is maintaining a continuous wet edge in a flat wash. If the flow stops, the earlier section begins to dry before the next stroke reaches it. The new paint then cannot merge smoothly, leaving a visible dry band, tide mark, or uneven edge; therefore option B is correct. An even value indicates successful continuity, not a broken flow. The interruption does not strengthen paper or automatically brighten pigment. Prepare enough mixture and work steadily.

Correct answer: A. Add slightly more clean water to the brush in each successive stroke

Explanation: The governing concept is gradually reducing pigment concentration to create a smooth value transition. In each successive stroke, adding a little more clean water dilutes the mixture, so the colour moves progressively from darker to lighter. Option A is correct. Adding darker pigment would reverse the intended transition, folding the paper interrupts the surface, and a completely dry brush cannot carry the fluid wash properly. Keep the changes gradual to avoid visible bands.

Correct answer: A. The paper is excessively wet

Explanation: The governing concept is water control in the wet-on-wet technique. Paint is applied to a damp surface, so the amount of moisture determines how far the pigment travels. If the paper is excessively wet, the colour loses control and spreads into unwanted areas. Therefore, option A is correct. A clean brush, dark pigment, or a small palette does not by itself cause excessive spreading. Remove extra water and apply paint when the surface is evenly damp.

Correct answer: B. Define the edge with controlled paint after the surface dries

Explanation: The governing concept is the contrast between soft-edge and hard-edge watercolour work. A soft edge is produced when wet paint merges into a damp area. To sharpen it, first allow the paper and paint to dry; then use a controlled load of paint and a suitable brush to redraw the boundary. Thus, option B is correct. Adding water, rubbing with cloth, or dipping the paper would disturb the pigment and make the edge less controlled. This is an example of wet-on-dry refinement.

Correct answer: B. By adding several light transparent layers over dry layers

Explanation: The governing concept is glazing, in which transparent washes are built gradually. Apply a light, diluted layer and let it dry completely; then repeat with another thin wash. Each layer increases the visual depth while the white paper and earlier colours remain visible, preserving transparency. Therefore, option B is correct. A single thick layer may become uneven or opaque, while black poster colour and glue change the medium and reduce the characteristic watercolour effect. Drying between layers prevents unwanted mixing.

Correct answer: A. The two colours may mix unintentionally

Explanation: The governing concept is separation of watercolour washes. A partially wet first layer still contains movable pigment. When a second wash is placed over it, moisture can reactivate and carry the earlier pigment, causing the colours to bleed together or form an unwanted blend. Therefore, option A is correct. Paper cannot become metal, and the colour will not automatically turn white. A brush may harden only if paint dries in it, which is unrelated to applying a second layer too soon. Let the first wash dry before layering.

Correct answer: A. It may make the colour opaque and chalky

Explanation: The governing concept is that transparent watercolour normally becomes lighter through dilution and by allowing more white paper to show. Adding opaque white pigment can cover the paper and reduce the luminous, transparent quality of the original wash, sometimes producing a dull or chalky appearance. Therefore, option A is correct. White does not always turn a colour black, and it does not lengthen a brush or automatically tear paper. A small amount may be used for special effects, but it is not the usual method for transparent lightening.

Correct answer: A. Mix blue and yellow in controlled amounts with a clean brush

Explanation: The governing colour-theory concept is that green is a secondary colour produced by mixing blue and yellow. In watercolour, a clean brush, clean water, and controlled quantities prevent unwanted pigment contamination, so the mixture remains bright and clear. Thus, option A is correct. Red and green tend to neutralise each other, while black and white make grey; mixing all three primaries commonly produces a dull neutral colour. The quality of the result also depends on using fresh, uncontaminated pigment.

Correct answer: A. Mixing too many unrelated colours

Explanation: The governing concept is pigment contamination and loss of colour clarity. Mixing too many unrelated pigments introduces several colour biases; together they absorb more light and neutralise one another, so the mixture appears dull, brownish, or muddy. Therefore, option A is correct. Clean water helps preserve brightness, a light pencil outline does not alter the pigment, and suitable thick watercolour paper supports controlled washes. To avoid muddiness, use a limited palette, mix only compatible colours, and rinse the brush before changing pigments.

Correct answer: A. While the colour is still damp

Explanation: The governing concept is lifting, which means removing some pigment to create a correction, highlight, or lighter passage. While the wash is still damp, the pigment has not fully settled into the paper, so a clean, slightly damp brush, tissue, or sponge can absorb it with relatively little effort. Therefore, option A is correct. Dry paint may sometimes be lifted, but it is more difficult and can disturb the paper surface. Oil and glue interfere with normal watercolour handling rather than helping.

Correct answer: A. Lift wet colour with a clean damp brush or paper

Explanation: The governing concept is preserving or recovering the white of the paper to represent light. In a cloud wash, gently lifting damp pigment with a clean, slightly damp brush or tissue exposes a lighter area, creating a soft highlight and natural variation. Therefore, option A is correct. Covering the cloud with black destroys the light effect, cutting the paper is not a painting process, and oil is incompatible with normal watercolour technique. Lifting should be gentle to avoid roughening the paper.

Correct answer: A. A rough broken texture

Explanation: The governing concept of dry-brush painting is using a brush with very little water and a relatively small amount of pigment. Because the brush does not flow continuously, it catches the raised texture of the paper and leaves broken, irregular marks. Thus, option A is correct. A smooth wash requires more evenly distributed moisture, while a very soft spread belongs to wetter techniques. Dry brush does not inherently produce metallic shine; it is useful for suggesting grass, bark, stone, hair, or rough surfaces.

Correct answer: A. The tone may change if the mixture runs out midway

Explanation: The governing concept is colour consistency in a continuous watercolour wash. If the prepared mixture runs out, a second mixture may have a slightly different ratio of pigment and water, making the tone lighter, darker, warmer or cooler. Preparing enough colour in advance helps the whole area remain even and avoids a visible joining mark. Paper thickness, brush size and drying behaviour do not change for this reason, so option A is correct.

Correct answer: A. The bead of colour moves evenly downward

Explanation: The governing concept is controlled flow during a watercolour wash. A slight tilt uses gravity to help the wet bead of colour travel steadily downward, allowing the painter to keep a continuous, even edge and reduce patchiness. The angle must remain gentle because excessive tilting can make the wash run too quickly and form drips. Tilting does not dry the paper, increase opacity or eliminate the need for a brush, so option A is correct.

Correct answer: A. Paper fibres may lift

Explanation: The governing concept is protecting the paper surface while controlling a watercolour wash. Repeated brushing or scrubbing over the same wet or softened area can abrade the paper and lift its fibres, producing rough patches, blooms or an uneven finish. Transparent, clean colour comes from balanced water and pigment with a few deliberate strokes, not from overworking. The other options describe effects that do not normally result from prolonged brushing, so option A is correct.

Correct answer: A. A light, cool and less intense colour

Explanation: The governing concept is atmospheric perspective. Layers of air between the viewer and distant objects reduce contrast and colour intensity, often making faraway mountains appear lighter, cooler and slightly bluish or grey. Using this effect creates visual depth: nearby forms can be darker and sharper, while distant forms recede. Very dark, warm, highly saturated or pure black marks usually attract attention and make the mountains appear closer, so option A is correct.