Watercolour

Correct answer: C. Darker

Explanation: The governing concept is pigment concentration in a transparent watercolour medium. When less water is mixed with the same amount of pigment, the mixture becomes more concentrated, so less white paper shows through and the painted area appears darker and stronger. Therefore, option C is correct. More water would create a lighter wash, while colourless and white do not describe the usual result.

Correct answer: D. Add more water to the colour

Explanation: The governing concept is dilution and transparency. Watercolour becomes lighter when more clean water is mixed with the pigment, because the pigment spreads through a thinner mixture and more white paper remains visible beneath it. Thus option D is correct. Adding black or applying a thick dark layer increases visual darkness, while rubbing dry paper does not create a controlled light wash.

Correct answer: B. To keep colours pure and bright

Explanation: The governing concept is controlled dilution without contamination. Water dissolves, thins, and spreads watercolour pigment, while clean water does not introduce dirt or traces of another colour. Consequently, the intended colour remains clearer and brighter, making option B correct. Dirty water can produce muddy mixtures; water does not cut paper, harden brush fibres, or turn paint oily.

Correct answer: D. A light pencil line

Explanation: The governing concept is preparing a faint underdrawing that guides placement without competing with the transparent paint. A light pencil line helps establish shapes and proportions and can remain unobtrusive beneath a watercolour wash, so option D is correct. Dark paint or charcoal may show through or spread, and an oil layer is incompatible with the absorbent, water-based working surface normally used for watercolour.

Correct answer: A. Leave part of the paper unpainted

Explanation: The governing concept is using the natural white of the paper as a highlight. Because transparent watercolour normally does not cover white areas with an opaque white layer, the artist plans ahead and leaves selected paper unpainted. Therefore option A is correct. Black paint removes the appearance of white, oil changes the surface, and a thick colour layer usually covers rather than reveals the paper.

Correct answer: C. A diluted colour area

Explanation: The governing concept is an even, diluted application of transparent pigment. In watercolour, a wash is a relatively broad area covered with colour mixed with enough water to spread smoothly and produce an even tone or gradual value. Therefore option C is correct. A wash is not specifically dry black paint, a scratch, or glue; those choices describe different materials or actions rather than a watercolour technique.

Correct answer: D. Let the first layer dry

Explanation: The governing concept is controlled layering in watercolour. The first wash should dry before another layer is added, because wet paint can mix, lift, or spread unpredictably when touched by a new brushstroke. Therefore, option D is correct. Folding the paper, adding excessive water, or rubbing the paint does not prepare a stable surface and may damage the paper or disturb the first layer.

Correct answer: A. Soft and diffused

Explanation: The governing concept is the wet-on-wet watercolour technique. Moisture already present in the paper allows the water-based pigment to flow outward from the brush mark, producing soft, blurred, and diffused edges. Thus, option A is correct. Paint does spread on wet paper; hard edges are more typical of wet-on-dry work, and watercolour does not settle like oil paint.

Correct answer: B. More defined

Explanation: The governing concept is wet-on-dry application. When watercolour is placed on dry paper, the paper does not provide a surrounding film of moisture, so the pigment remains closer to the brush mark and spreads less. This makes the edges more defined, so option B is correct. Very blurred edges are associated with wet-on-wet work, while invisible or metallic edges are unrelated distractors.

Correct answer: C. Wet-on-wet effect

Explanation: The governing concept is using edge quality to suggest soft forms. In the wet-on-wet method, a lightly moistened surface lets diluted watercolour spread gently, creating blurred transitions suitable for clouds. Therefore, option C is correct. Hard black lines produce sharp outlines, a thick layer can look heavy, and oil mixture is not part of normal watercolour practice. A light wash can make the effect more natural.

Correct answer: D. Dry surface

Explanation: The governing concept is wet-on-dry control. A dry surface absorbs and holds the watercolour closer to the brush movement, so a small line remains sharper and easier to control. Therefore, option D is correct. Very wet paper or soaked paper lets the pigment spread and blur, while an oily surface is unsuitable because watercolour does not distribute properly over oil. Fine details are best added after the surface is dry.

Correct answer: A. Clean water

Explanation: The governing concept is that watercolour is a water-soluble medium. Clean water dissolves and removes remaining pigment from the bristles, allowing the next colour to stay uncontaminated. Therefore, option A is correct. Turpentine is associated mainly with cleaning oil-paint materials, while sand and chalk powder can damage or clog the bristles and cannot properly wash out watercolour. Rinse the brush between colours and remove excess water gently.

Correct answer: B. Reshape the bristles and dry it horizontally

Explanation: The governing concept is proper brush maintenance. After washing, the bristles should be gently reshaped and the brush should dry horizontally, preferably in a clean, ventilated place. Thus, option B is correct. This position prevents water from collecting near the ferrule and helps preserve the pointed shape. Standing it in paint, pressing the bristles down, or sealing it in a wet box can bend, weaken, or spoil the brush.

Correct answer: C. The colour may become contaminated

Explanation: The governing concept is preventing colour contamination. A dirty brush may carry leftover pigment, muddy water, or another colour into the watercolour pan. That material mixes with the stored paint, so the colour may become impure or dull; therefore, option C is correct. A dirty brush does not make paint brighter or dry faster, and it cannot change the physical size of the pan. Rinsing before picking up paint protects colour clarity.

Correct answer: D. The colours may smudge or the painting may be damaged

Explanation: The governing concept is that wet watercolour remains mobile until its water evaporates. Touching the surface too soon can transfer pigment, leave fingerprints, create smudges, or lift part of the wash from the paper. Therefore, option D is correct. Touching does not increase paper thickness, brighten colours automatically, or permanently set the paint. The safe practice is to let each wash dry and handle the sheet by its edges.

Correct answer: A. Add more water to blue

Explanation: The governing concept is dilution and transparency in watercolour. Adding more clean water reduces the concentration of blue pigment, allowing more of the white paper to show through; the result is a lighter, more transparent blue. Therefore, option A is correct. Black makes the colour darker, red shifts it toward violet or a duller mixed hue, and oil is not an appropriate watercolour ingredient. Water is the basic lightening control.

Correct answer: B. Use less water and more paint

Explanation: The governing concept is pigment concentration in a watercolour wash. Using less water with more blue pigment makes the mixture more concentrated, so it produces a darker value on the paper. Therefore, option B is correct. A large amount of water dilutes the pigment and creates a lighter wash, leaving paper unpainted creates no blue, and adding oil is not an appropriate watercolour method.

Correct answer: C. The paper may warp or buckle

Explanation: The governing concept is the reaction of paper fibres to excess moisture. Too much water can soak the sheet unevenly; when the wet fibres expand and then dry, the paper may warp, buckle, or become wavy. Therefore, option C is correct. Water does not make paper metallic or oily, and it does not cause the paper itself to become colourless, although paint may spread.

Correct answer: D. The paper remains stable

Explanation: The governing concept is workspace stability during painting. Fixing watercolour paper to a board holds it in place, so it does not slide or shift while the artist applies washes and details. Therefore, option D is the best answer. Taping or stretching may also reduce buckling, which makes option A a related benefit, but mounting primarily provides a stable working surface; it cannot clean a brush or darken colour automatically.

Correct answer: A. Darker colours can be added later

Explanation: The governing concept is the watercolour sequence of working from light to dark. Because watercolour is generally transparent and the white of the paper supplies the lightest areas, an artist can gradually add stronger pigment and darker washes later. Therefore, option A is correct. Painting dark areas first is harder to correct, while colour cannot make paper thicker, change brush size, or become oily.

Correct answer: B. The transparent layer has already created a dark effect

Explanation: The governing concept is the limited ability to erase or cover a dried watercolour wash. A dark, transparent pigment layer has already stained or visually covered the paper, and lifting it completely may damage the surface or leave a mark. Therefore, option B is correct. Water does not turn every colour black, the paint does not cut the paper, and a brush does not disappear. This is why artists usually build values gradually from light to dark.

Correct answer: D. On a separate test paper

Explanation: The governing concept is testing a colour before committing it to the finished artwork. Applying a small sample to separate paper shows its actual hue, transparency, value, and amount of water after it spreads and dries. Therefore, option D is correct. Testing in the centre can spoil the painting, clothes are an unsuitable surface, and the floor does not provide a reliable paper comparison. A test strip also helps maintain consistent colour.

Correct answer: A. Add more water to the colour

Explanation: The governing concept is value control through dilution. Adding more clean water lowers the concentration of pigment, producing a lighter wash suitable for the illuminated part of a leaf. Therefore, option A is correct. Adding black or applying a thick concentrated layer increases darkness and may make the colour muddy. Oil is not compatible with the normal watercolour method and does not create a proper light wash.

Correct answer: B. Apply dark green with less water

Explanation: The governing concept is creating darker value by increasing pigment concentration. Mixing dark green with less water leaves more pigment in the wash, so the colour appears deeper and can represent the shaded portion of the leaf. Therefore, option B is correct. A lot of water produces a pale wash, leaving the area unpainted does not show its form, and white paint represents light rather than shadow in this context.

Correct answer: C. Light blue wash

Explanation: The governing concept is using a diluted wash to establish a light, transparent area. A light blue wash spreads a controlled layer of pigment while allowing some of the paper’s white to show through, which suggests the reflective surface of a river or lake. Therefore, option C is correct. A thick black layer is too dark, oil is unsuitable for watercolour, and scratching the paper damages the surface rather than creating a soft water effect.