Watercolour

Correct answer: A. Painting

Watercolour is a painting medium made from pigments that are mixed with water and applied to paper or another suitable surface. The artist controls the amount of water to create transparent washes, lighter tones, layered colour, edges, and details. Since the purpose is to make an image with colour, shape, line, and tone, watercolour belongs to painting or visual art. Option A is correct. Drama depends on acting and performance, music depends mainly on sound and organised notes, and embroidery uses needle and thread to decorate fabric. These distractors describe different processes and materials. The governing clue is that watercolour is a medium and technique used for image-making in painting.

Correct answer: D. Lighter and more transparent

The governing concept is dilution in watercolour technique. When extra water is added, the same amount of pigment is spread through more liquid, so the paint layer appears paler and allows more of the paper or lower layer to show through. Thus, option D is correct. Water alone does not create a secondary hue, blackness, or greater opacity; those effects would require different pigments or a higher pigment concentration.

Correct answer: A. To dilute watercolour

The governing concept is the relationship between a painting medium and its suitable solvent or diluent. In watercolour painting, water spreads and dilutes the pigment, making the wash thinner and often more transparent. Therefore option A is correct. Water does not dry oil paint, cut paper, or inherently darken colour; too much water usually makes a watercolour lighter rather than darker.

Correct answer: B. The colour becomes lighter and more transparent

The governing concept is pigment concentration in a watercolour wash. Adding water increases the liquid portion while spreading the same pigment over a larger area, so the colour generally appears lighter and more transparent after application. Thus option B is correct. Excess water does not make watercolour oily or black, and it normally reduces, rather than increases, colour strength and darkness.

Correct answer: A. Add more water

The governing concept in watercolour is transparency. Unlike opaque media, watercolour becomes lighter when more water spreads the pigment over a larger area and allows more of the white paper to show through. Therefore, option A is correct. Black generally makes a mixture darker, a complementary colour can neutralise it, and pressing harder on the paper does not change the pigment value reliably.

Correct answer: A. Water

The governing concept is the relationship between a painting medium and its diluent. Watercolour is a water-based medium, so clean water is used to spread the pigment, reduce its concentration, and increase transparency. Oil, glue, and sand do not properly dilute watercolour and can damage the intended consistency or surface. Therefore, option A is correct; the amount of water controls the wash strength.

Correct answer: A. The colour may become very light and weak

In watercolour, the governing concept is dilution: water spreads the pigment and reduces its concentration. When too much water is added, the mixture becomes thin, transparent, and less intense, so the painted result may look very light or weak. It does not normally become darker or thicker; black appears only if black pigment is introduced. Therefore, option A correctly describes the likely effect.

Correct answer: B. By washing it with clean water

The governing concept is maintenance of painting tools. Poster colour is water-based, so rinsing the brush promptly in clean water removes pigment from the bristles before it dries and hardens; thus option B is correct. Oil is unnecessary and may contaminate the brush, sand can damage the bristles, and leaving paint unwashed allows it to become stiff. After washing, the brush should be reshaped and stored appropriately.

Correct answer: A. It is generally transparent

The governing concept is the transparency of watercolour washes. Watercolour pigment is carried in water and is normally applied so that the white of the paper remains visible through the paint, especially in light washes. Therefore option A is correct. It is not restricted to metal, it cannot cut paper, and it is not always opaque. Some watercolours can appear more opaque when heavily layered, but transparency remains the medium’s characteristic feature.

Correct answer: B. Water

The governing medium principle is water solubility. Watercolour pigment is designed to mix with water, so adding water reduces the concentration of pigment in the brush or wash and makes the result lighter and generally more transparent. Option B is correct. Oil is associated with oil-paint techniques, while sand and wax are not normal thinning agents for watercolour and would interfere with application. Add water gradually so the desired value and consistency can be controlled.

Correct answer: C. Brush

A brush is the standard tool for applying watercolour because its bristles hold both water and pigment and release them gradually onto paper. A broad brush covers large areas, while a pointed brush makes fine marks. Scissors cut paper, a compass draws circles, and a hammer is unrelated to painting. Therefore, option C is the only suitable painting tool.

Correct answer: D. Palette

A palette is a smooth, non-absorbent surface made for holding and mixing paints. In watercolour work, water and pigment can be combined in its wells to create lighter, darker, or intermediate shades before application. Cloth, soil, and many stones may absorb moisture or make mixing uneven. Thus, option D, the palette, is the most suitable surface.

Correct answer: A. Lighter and more transparent

Adding water dilutes the concentration of pigment in watercolour. As a result, the painted layer becomes lighter and allows more of the paper to show through, so it appears more transparent. This is the basis of creating pale washes. More water does not make paint metallic, opaque, or dry. Therefore, option A is correct, although excessive water can reduce control.

Correct answer: B. The colour appears darker

Watercolour value depends strongly on the relationship between water and pigment. Using less water and more pigment produces a more concentrated mixture, so the painted mark appears darker and usually less transparent. A very watery mixture generally creates a pale wash that spreads more easily. The paper does not become transparent. Hence, option B is the correct result.

Correct answer: C. Thick watercolour paper

Thick watercolour paper is designed to receive water and pigment without becoming badly damaged. Its weight and surface help it resist excessive buckling, tearing, and wrinkling while washes are applied. Thin newspaper can weaken and crumple, plastic does not absorb paint like paper, and wet cloth is unstable for controlled painting. Therefore, option C is the most suitable choice.

Correct answer: D. Leave the white paper unpainted

In transparent watercolour, the white of the paper commonly represents white light and bright highlights. The painter plans those areas in advance and avoids covering them with pigment. Black or red paint would change the area to another colour, while cutting the paper is unnecessary and damages the support. Therefore, leaving the paper unpainted, option D, is the simplest method.

Correct answer: A. Violet

The governing concept is secondary-colour mixing. When red pigment and blue pigment are mixed in watercolour, they produce violet or purple, so option A is correct. Green is formed from blue and yellow, while orange is formed from red and yellow. The exact shade can vary with the pigments used, but the expected school-level result of red plus blue is violet.

Correct answer: B. Add more water to blue

Watercolour is a transparent medium, so its value is controlled mainly by the pigment-to-water ratio and the white paper beneath it. Adding more clean water to blue spreads the pigment into a paler, lighter wash, making option B correct. Black would darken the colour, red would shift it toward violet, and yellow would shift it toward green rather than simply creating light blue.

Correct answer: C. Use more red pigment and less water

In transparent watercolour, colour depth depends on pigment concentration. Using more red pigment and less water creates a stronger, darker red wash, so option C is correct. More water spreads the pigment and makes the colour lighter. White is not normally used to lighten transparent watercolour because the paper provides the light; yellow would alter the hue toward orange instead of simply deepening red.

Correct answer: D. Wash

A wash is the governing watercolour term for a broad, diluted layer of paint. Because the pigment is mixed with sufficient water, the layer remains light and transparent and allows the paper to influence the appearance. Therefore option D is correct. A line and a dot describe marks or shapes, while a shadow describes a dark area caused by light, not this application method.

Correct answer: A. Fill an area with even colour

The governing idea of a flat wash is uniform coverage. The artist applies paint with a consistent pigment-and-water mixture so that one selected area appears evenly coloured from one side to the other. Thus option A is correct. Dots are made with a separate mark-making method, cutting paper is a craft action, and drying a brush is a tool-care step rather than a painting purpose.

Correct answer: B. Graded wash

A graded wash is a watercolour passage in which the tone changes gradually, commonly from darker at the top to lighter at the bottom. The artist achieves this by beginning with a stronger mixture and progressively adding water or using less pigment as the brush moves downward. Option B is therefore correct. A dry line, ink drawing and hard edge describe different marks or effects, not a gradual tonal transition.

Correct answer: C. Wet-on-wet

The governing concept is the condition of both the surface and the paint. When wet paint is placed on wet or damp paper, it is called the wet-on-wet technique, so option C is correct. Moisture allows the pigment to travel and blend, creating soft transitions and diffused edges. Dry-on-dry uses a dry surface, while line drawing and printing are different processes.

Correct answer: D. Wet-on-dry

Technique names are determined by the state of the paper and the paint. Wet watercolour applied to dry paper is called wet-on-dry, making option D correct. The dry surface limits spreading and helps the artist create relatively clean, controlled edges. Wet-on-wet requires damp paper, dry-brush uses little paint on a nearly dry brush, and glazing means building transparent layers rather than naming this exact condition.

Correct answer: A. Soft and diffused

In wet-on-wet painting, the paper or previous layer is damp when fresh colour is added. Water carries the pigment beyond the immediate brush mark, allowing neighbouring colours to merge and producing soft, diffused edges; therefore option A is correct. Sharp edges are more typical of wet-on-dry work, rough marks belong to dry-brush effects, and metallic shine is not a defining watercolour edge quality.