Colour filling and blending

Correct answer: D. The colour may become lighter and the filling may appear more uneven

Explanation: The governing concept is dilution and consistency in colour filling. As water increases in successive strokes, the pigment-to-water ratio falls, so the later area may look lighter, thinner, and more uneven or patchy. Extra water does not deepen or make paint fully opaque, and the appearance will change rather than remain constant. Therefore option D is correct.

Correct answer: A. Mix the paint gently and avoid excessive scrubbing

Explanation: The governing concept is avoiding trapped air during paint preparation and application. Vigorous whipping or excessive scrubbing introduces air into the mixture and can leave small bubbles in the filled area. Gentle mixing and controlled strokes reduce that risk. Filling a brush with air or folding the paper would worsen the process rather than prevent bubbles, so option A is correct.

Correct answer: B. Create clear value contrast in either the figure or the background

Explanation: The governing concept is figure–ground separation through value contrast. If the figure and background are nearly equal in lightness or darkness, their boundaries merge visually. Making either the figure or the background distinctly lighter or darker restores focal clarity. Using the same colour, softening every edge, or adding water does not reliably create separation, so option B is correct.

Correct answer: A. It makes the colour change gradual and balanced

Explanation: The governing concept is controlled colour gradation. Intermediate mixtures divide a long transition into small, evenly spaced value or hue steps, so the eye moves smoothly from the starting colour to the ending colour. This reduces abrupt bands and keeps the blend balanced. Option B would create a hard boundary, while C and D do not describe the purpose of arranging mixtures.

Correct answer: B. Use a stronger concentration of the same colour or a suitable related dark colour

Explanation: The governing concept is preserving colour character while changing value. Instead of automatically adding black, the artist can use a more concentrated mixture of the same pigment or a compatible darker neighbouring colour. This usually produces a richer shadow and avoids a dull, muddy result. White raises the value, water generally dilutes it, and changing paper does not itself create the darker mixture, so B is correct.

Correct answer: C. Keep the basic sequence while varying size or spacing in a controlled way

Explanation: The governing design concept is unity with variety. Repetition establishes rhythm, but exact repetition of colour, size and spacing can become predictable. Keeping the basic sequence while varying shapes or intervals in a controlled manner preserves recognition and rhythm while adding visual interest. Removing repetition destroys the rhythm, random placement weakens order, and blackening everything removes useful colour relationships; therefore C is correct.

Correct answer: D. All areas demand equal attention

Explanation: The governing concept is emphasis through contrast and hierarchy. A focal point becomes strong when it receives selective differences in brightness, saturation, value or detail. If every area is equally bright, no region has greater visual priority, so the viewer’s attention is spread across the whole picture. Bright colours remain visible; paper acceptance and transparency are unrelated to this compositional problem. Thus D is correct.

Correct answer: A. The main figure appears more prominent

Explanation: The governing concept is saturation contrast used for emphasis. A muted, less saturated background usually recedes visually, while the more saturated colour on the main figure attracts stronger attention. This separation establishes a clear focal hierarchy, so the figure appears more prominent. The figure would be lost only if the background competed more strongly; the treatment does not make colours identical or turn the painting monochrome. Therefore A is correct.

Correct answer: B. The background may attract attention and compete with the main figure

Explanation: The governing concept is visual weight in composition. A background that is both darker and more saturated can carry strong contrast and attract the eye before the viewer reaches the intended subject. It may therefore compete with or weaken the main figure, especially when the figure has less contrast. The word “always” makes A too absolute, while C and D are unrelated physical claims. Hence B is correct.

Correct answer: C. The light transition will look unnatural and the fruit will appear spotted

Explanation: The governing concept is modelling a rounded form with gradual transitions. On a spherical fruit, a highlight normally merges softly into the surrounding middle and darker values. A hard dark ring interrupts that flow, making the light pattern look artificial and causing the surface to appear spotted rather than smoothly rounded. It does not change transparency, colour purity or physical size, so C is the only suitable answer.

Correct answer: D. Local colour and subtle value differences may be lost

Explanation: The governing concept is coloured-light and shadow modelling. A shadow is darker, but it usually still contains the object’s local hue and differences between reflected, middle and deepest values. Replacing every shadow mixture with black can flatten those relationships and make the object look dull or disconnected from its material. It does not make the shadow more colourful, lighter or automatically transparent; therefore D is correct.

Correct answer: A. When the mixture's colour or consistency is uncertain

Explanation: The governing studio practice is testing an uncertain mixture before committing it to the artwork. A test stroke shows the actual colour, value, opacity, flow and consistency on the chosen surface. The artist can then add pigment or water and correct the mixture without damaging the main painting. A new brush may still need testing, but it is not the essential condition; a simple shape and a closed container provide no reason. Thus A is correct.

Correct answer: B. Different absorption and texture may change the behaviour of colour

Explanation: The governing concept is surface-dependent paint behaviour. Different papers can absorb liquid at different rates and can have different texture, sizing and tooth. These differences affect spreading, edge sharpness, transparency, drying appearance and final value. Therefore a mixture that looks correct on one paper may flow or dry differently on the actual painting surface. The colour name and brush length do not change, and drying is not always the stated problem, so B is correct.

Correct answer: C. The paint concentration was lower than required

Explanation: The governing concept is colour value, which depends largely on pigment concentration and the amount of water or medium. If the mixture contains too little pigment, the filled area receives insufficient colour and appears pale even when the boundary is neat. A small brush may affect speed, while a clear boundary and closed shape do not reduce colour strength. Therefore, option C is correct; testing a sample and adjusting the mixture prevents the problem.

Correct answer: D. Lift a limited amount of paint with a clean blotted brush

Explanation: The governing technique is controlled lifting from a damp paint layer. A clean brush with most of its moisture blotted out can touch the dark area and absorb a small amount of pigment; repeated gentle touches give gradual correction. Adding dark paint worsens the value, hard rubbing can damage the surface, and washing the whole picture is excessive. Thus option D is the safest and most precise correction.

Correct answer: A. The transition may become muddy and uncontrolled

Explanation: The governing concept is colour contamination during blending. A brush carrying leftover pigment transfers it into the next area, so neighbouring colours mix unintentionally and the transition loses clarity, often becoming muddy. Cleaning and lightly blotting the brush removes excess colour and water before the next stroke. It cannot make paper stronger or automatically clean an edge, and brightness is not guaranteed. Therefore, option A is correct.

Correct answer: B. Excessive scrubbing and repeated manipulation

Explanation: The governing concept is surface preservation during painting. Repeated brushing and scrubbing disturb or compress the paper fibres and can remove surface texture, producing a polished, shiny, worn patch. The correct response is to plan the transition, use sufficient but limited strokes, and let layers settle before revisiting them. A pure colour, small brush, or light paper does not by itself create this damage. Hence option B is correct.

Correct answer: C. Lost light areas may be difficult to recover later

Explanation: The governing concept is value planning: artists usually build darker tones gradually while protecting highlights. Once a light paper area is covered with dark pigment, restoring its original brightness may be difficult, especially in media that do not lift cleanly. Preserving the lightest shapes first therefore keeps the full range of values available. Dark paint does dry, and light colours do not damage brushes. Thus option C is correct.

Correct answer: B. Use limited blending at the boundary and a clean brush

Explanation: The governing concept is controlled blending: contrasting colours remain brighter when their identities are preserved instead of being mixed into one dull mass. Blend only near the boundary, use a clean brush, and make a few deliberate strokes. Option B is correct because it softens the transition while retaining colour strength. Complete palette mixing, black paint, and repeated rubbing can reduce brightness or create a muddy result.

Correct answer: D. Clean the brush and limit further mixing

Explanation: The governing concept is avoiding overmixing. A muddy middle usually develops when a dirty brush carries unwanted pigment or when too many strokes combine the colours excessively. The first correction is to clean the brush and stop unnecessary movement, so option D is correct. Adding water may spread the muddiness, increasing dark paint can make the tone heavier, and rubbing the whole area usually damages the surface.

Correct answer: A. When the lower surface must be fully covered

Explanation: The governing concept is opacity: a suitably thick paint layer contains enough pigment to hide the surface beneath it. Option A is correct when the lower drawing, stain, or previous colour must be fully covered in an even application. Transparency requires a thinner mixture, flowing paint is controlled by fluidity rather than thickness alone, and soaking the paper is unrelated. The layer should still remain workable, not excessively stiff.

Correct answer: B. Tone and transparency will become uneven

Explanation: The governing concept is consistency of paint concentration. If the water amount changes from one stroke to the next, the pigment-to-water ratio also changes, producing lighter and darker patches and different levels of transparency. Option B is correct. Uneven water does not automatically make a layer even, dry the colour instantly, or change the softness of the brush. A stable mixture and overlapping strokes improve a flat area.

Correct answer: A. It creates a visual bridge between the colours

Explanation: The governing concept is gradation through an intermediate step. A related middle colour reduces the abrupt difference between the starting and ending colours, so the eye reads a continuous transition instead of a hard boundary. Option A is correct because the intermediate hue acts as a visual bridge. It does not turn colours black, alter paper thickness, or change the physical size of the brush.

Correct answer: A. Following the curvature of the object

Explanation: The governing concept is to make brushwork follow the form of the object. On a rounded surface, curved strokes that follow its contour help the colour transition describe volume and make the object look three-dimensional. Therefore, option A is correct. Only vertical strokes may ignore the form, irregular strokes weaken the sense of structure, and outlining alone cannot create a smooth rounded blend.

Correct answer: B. Flat or unbalanced

Explanation: The governing concept is tonal balance in modelling a rounded form. A highlight should be limited in size and placed consistently with the light source. If it becomes too large, the light area dominates the surface and the gradual transition into middle tone and shadow is lost; the fruit may then look flat or visually unbalanced. Option B is correct. A large highlight does not make the fruit transparent, black, or automatically more realistic.