Colour filling and blending

Correct answer: A. Brush loading and pressure were not consistent across the area

Explanation: The governing concept is uniform paint distribution. If the centre receives more pigment or pressure than the edges, the colour becomes darker in the middle and lighter around the perimeter. Option A is correct because inconsistent brush loading, pressure, or stroke overlap creates this imbalance. The size of the shape, the length of the colour name, and white paper do not explain the uneven deposit. Consistent loading and overlapping strokes improve the fill.

Correct answer: B. The layer thickness differed between the two parts

Explanation: The governing concept is the change in perceived colour as paint dries. Different layer thicknesses can leave different amounts of pigment on the surface, so the thicker or more concentrated section may dry with greater depth or a different apparent value. Option B is therefore correct. Equal water, the same brush colour, and equal paper size do not account for a difference between two painted areas. Consistent layers improve uniformity.

Correct answer: C. Place relatively darker tones around it to create controlled contrast

Explanation: The governing concept is tonal contrast: the apparent brightness of a patch depends partly on the values around it. If relatively darker tones are placed beside the lit area, the difference in value becomes clearer, so the light area appears brighter without changing its actual pigment. The same light tone would reduce contrast, while blurring or whitening the whole picture would weaken form and emphasis. Therefore, option C is correct.

Correct answer: D. Shape clarity and focal emphasis may weaken

Explanation: The governing concept is edge variety. Hard, soft, and lost edges guide the eye and help describe the structure of forms. When every transition is equally soft, neighbouring shapes can merge, boundaries become uncertain, and the focal area loses emphasis because nothing receives special visual control. A soft edge is useful in selected areas, but not everywhere. Thus option D correctly identifies the loss of shape clarity and focal emphasis.

Correct answer: A. The brush is wetter than the surface

Explanation: The governing concept is moisture control during colour lifting. A brush may be clean but still hold excess water; when it touches a damp or partially lifted area, that water is released and spreads the pigment or leaves a pale wet mark. The correct remedy is to rinse if needed and blot the brush so it is damp rather than dripping. Brush size, colour lightness, and paper shape do not explain the water mark, so option A is correct.

Correct answer: B. The colour will become more transparent and fluid

Explanation: The governing concept is dilution. Adding water lowers the concentration of pigment in the mixture, so the colour becomes lighter in appearance while allowing more of the underlying paper or layer to show through. It also increases fluidity and may encourage spreading or runs. This is different from adding white, which can lighten an opaque paint while retaining coverage. Therefore option B is correct; water does not make paint opaque, permanently warm, or unable to dry.

Correct answer: C. Mix a suitable amount of white or a lighter opaque colour

Explanation: The governing concept is opaque tinting. Mixing an appropriate amount of white or another lighter opaque paint raises the mixture’s value while preserving pigment coverage, so the underlying surface is still concealed. In contrast, adding a large amount of water mainly dilutes the pigment and increases transparency. Drying changes the state but does not reliably lighten the colour, and black darkens it. Therefore option C is the most suitable method.

Correct answer: D. The light layer is transparent so the dark colour underneath shows through

Explanation: The governing concept is opacity and layering. When the light paint is transparent or highly diluted, the dark ground shows through and optically lowers the apparent brightness of the upper colour. The remedy may be a more opaque layer or several controlled coats, depending on the medium. A light colour is not inherently dark, clean paper or a clean brush does not cause this effect, and the paper has not necessarily changed the pigment. Therefore option D is correct.

Correct answer: A. Use clear edges in important areas and softer edges where the form turns

Explanation: The governing concept is edge variety. A clearly defined edge attracts attention and explains an important boundary, while a softer edge suggests that the form turns away, loses focus, or receives diffused light. Therefore, option A creates depth and realism. A black outline makes the object look flat, removing every edge destroys its structure, and blurring everything removes both form and focal emphasis.

Correct answer: B. Move forward promptly while slightly overlapping the previous damp edge

Explanation: The governing technique is a continuous wet-edge or working-edge method. The next stroke should touch and slightly overlap the preceding damp stroke, so moisture and pigment join before drying and produce an even fill. Thus option B is correct. Complete drying creates visible bands, long pauses produce hard joins, and a dry brush disturbs the surface without restoring an even flow.

Correct answer: C. The contrast between the two ends may weaken and the blend may look flat

Explanation: The governing concept is balanced colour transition. If the middle colour occupies too much space or becomes too strong, it reduces the contrast and identity of the colours at both ends. The eye then reads less direction and depth, so the blend can appear flat; option C is correct. A dominant middle colour does not clarify the end colours, create transparency, or automatically make the boundary harder.

Correct answer: D. Reduce the surface tilt and lift accumulated paint in time

Explanation: The governing concept is control of liquid flow during a wash. A steeper tilt increases the downward pull of fluid, so pigment gathers at the lower edge and the tone becomes uneven. Option D corrects both causes: reduce the angle and remove excess paint promptly with a suitable brush. More tilt or more paint worsens pooling, while pausing the brush does not control the flow.

Correct answer: A. Repeat selected colours, tones, or transition qualities across different areas

Explanation: The governing design principle is unity through controlled repetition. Reusing a selected colour, tone, or similar transition in more than one area creates visual links, while still allowing variation. Therefore option A strengthens the composition without destroying its structure. Completely unrelated colour families increase fragmentation, black borders overemphasise separation, and removing the subject does not solve the lack of harmony.

Correct answer: B. Attention may shift toward the background

Explanation: The governing concept is visual emphasis through colour intensity. Bright, highly saturated colours attract the eye more strongly than duller or quieter colours. If the background has greater intensity than the subject, it may become the visual focal point, so option B is correct. The subject will not automatically stand out, balance is not guaranteed, and intensity does not make all colours neutral.

Correct answer: C. Brush loading and stroke overlap were uneven

Explanation: The governing concept is consistency in transparent layering. Because the paper and earlier layers remain visible through a transparent wash, unequal brush loading or irregular overlap produces darker and lighter patches after drying. Option C is therefore the most likely cause. Transparency itself is intended, white paper is a normal support, and a thin layer is not automatically blotchy when it is applied evenly.

Correct answer: D. Make the highlight smaller, cleaner, and more controlled

Explanation: The governing concept is focused contrast in a reflected highlight. A shiny surface usually shows a relatively small, brighter area where light is reflected most directly; tightening that area increases contrast and makes the surface appear glossy. Thus option D is correct. Spreading the highlight weakens its concentration, lightening the whole object removes modelling, and removing the shadow destroys the value structure.

Correct answer: A. Let the first layer dry fully and then apply a thin, controlled layer

Explanation: The governing concept is layered correction without disturbing the underpainting. Allowing the first layer to dry prevents the brush from lifting or muddying it; a thin second layer can then even out value and colour gradually. Therefore option A is correct. Continuous rubbing damages wet paper and creates streaks, thick immediate paint reduces control, and immersing the paper destroys the carefully placed layer.

Correct answer: B. Add a small amount of a suitable cool colour and test it

Explanation: The governing concept is colour temperature adjustment. A warm mixture can be cooled by adding a small amount of an appropriate cool colour, but the addition must be gradual because a complementary or strongly tinted pigment can change the mixture quickly. Option B is correct. More red increases warmth, black mainly lowers value and may muddy the colour, and discarding the mixture is unnecessary.

Correct answer: A. The ratio of paint and water was not consistent throughout

Explanation: The governing concept is consistency of mixture and value across a painted area. If the paint-to-water ratio changes while working, one section receives more pigment and appears darker, whereas a more diluted section appears lighter. The upper-light and lower-dark result therefore most likely comes from an inconsistent mixture or replenishment. Option A is correct; brush cleanliness, paper size, and drawing the boundary do not explain this tonal shift.

Correct answer: A. The form appears clearer and more organised

Explanation: The governing concept is form-following brushwork: strokes should support the direction and surface of the object. Curved strokes can describe rounded forms, while straighter strokes suit flat planes. This makes the form clearer and more organised. It does not automatically make paint transparent, change brush length, or stop paper from drying, so option A is correct.

Correct answer: B. The transition will be uneven and difficult to control

Explanation: The governing concept is consistency control in blending. A thin colour flows and covers differently from a thick colour, so their meeting point becomes uneven and difficult to manage. Similar paint consistency allows a smoother, more predictable transition. The colours will not necessarily spread equally, turn white, or clean the brush; therefore option B is correct.

Correct answer: C. Blend a lighter value on one side and a darker value on the other

Explanation: The governing concept is value modelling: light and dark differences describe planes, folds, and the direction of light. Blending a lighter value on one side of the vein with a darker value on the other gives the leaf a visual ridge and volume. A black outline or isolated white dots cannot model the whole surface, and erasing removes the form, so C is correct.

Correct answer: D. Gently soften selected outer edges with a clean damp brush

Explanation: The governing concept is edge control. A clean, slightly damp brush can soften a selected hard edge by lifting or diffusing a small amount of paint, while other edges remain varied. Blackening or darkening the petal does not solve the edge problem, and hard scrubbing can damage the surface or create a patch. Thus option D is correct.

Correct answer: A. Glazing

Explanation: The governing concept is glazing, in which a thin, transparent layer is placed over a completely dry painted layer. Light passes through the upper colour, so the underlying form and details remain visible while the overall colour effect changes. Dabbing uses touches, splattering sprays droplets, and scumbling usually lays a broken, semi-opaque layer; therefore A is correct.

Correct answer: C. To create a smoother colour relationship between the two ends

Explanation: The governing concept is transitional colour blending. An intermediate colour acts as a bridge between two end colours, reducing an abrupt visual jump and making the passage appear smoother. It does not completely separate the colours, automatically make them opaque, or darken the paper. Therefore, the purpose described in option C is the correct one.