Colour filling and blending

Correct answer: B. While the colour is still damp

Explanation: The governing principle is timely correction while the paint layer is still workable. A small damp error may be lifted, blotted, or softly blended with a clean, slightly damp brush or tissue, depending on the medium and paper. Once dry, the paint bonds more firmly and removal can damage the surface. Thus option B is correct; tearing the paper or adding varnish makes correction worse.

Correct answer: C. The paper surface may become abraded or stained

Explanation: The governing concept is gentle handling of a wet paint layer. A dry cloth used with force can pull up fibres, spread pigment irregularly, create a rough patch, or leave a stain instead of removing the mistake cleanly. Option C is therefore correct. A hard rubbing action does not guarantee even colour, it does not clean the brush, and a shape cannot correct itself without controlled painting.

Correct answer: D. Create a gradual transition between two colour bands

Explanation: The governing concept of blending is a controlled, gradual transition rather than a sudden boundary. Creating a transition between two colour bands lets a beginner practise pigment quantity, water balance, brush pressure, stroke direction, and the timing of overlapping wet areas. Option D directly trains these skills. Black lines, cutting paper, and writing brush names may be useful elsewhere, but they do not practise smooth colour transitions.

Correct answer: A. It keeps colours pure and prevents unwanted mixing

Explanation: The governing concept is control of colour mixture. Residual pigment on a dirty palette can contaminate a fresh colour, shift its hue or value, and make a blend look muddy. A clean palette keeps the prepared mixtures predictable, so option A is correct. It does not change the physical length of a brush, darken the paper by itself, or dry paint immediately; those claims confuse palette hygiene with other properties.

Correct answer: B. A balance of paint consistency, brush control and proper timing

Explanation: Successful colour filling and blending depend on coordinating three practical factors: suitable paint consistency, controlled brush movement, and correct timing between strokes or layers. The right balance produces even coverage and smooth transitions, so option B is correct. Expensive materials do not replace technique; speed alone reduces control, and excess water may cause runs, weak colour, or unwanted edges. The needed balance can vary with the medium and surface.

Correct answer: C. Use a small pointed brush with less paint and light pressure near the edges

Explanation: The governing concept is matching brush size and paint load to the space being filled. A small pointed brush, a reduced amount of paint, and light pressure give precise control near a narrow boundary; the centre can then be filled carefully. Option C is correct. More water or a large fast brush would increase spreading, while erasing the boundary removes the guide instead of solving the technique problem.

Correct answer: B. To prevent white gaps

Explanation: The governing concept is continuous coverage. When adjacent strokes overlap slightly, small gaps caused by brush shape, pressure, or uneven movement are covered, producing a more uniform painted area. Therefore option B is correct. Overlap may sometimes alter darkness if excessive paint is deposited, but its primary purpose here is not darkening. It does not clean the brush or dry the paper.

Correct answer: A. Prepare enough of the same colour mixture

Explanation: The governing concept is consistency across a continuous painted area. Preparing enough of the same mixture before starting reduces interruptions and prevents small differences in pigment, water, or value from appearing between strokes. Thus option A is correct. Making a new mixture for every stroke can create visible bands, a completely dry brush may give uneven coverage, and adding water afterward cannot reliably restore a uniform tone.

Correct answer: C. A new wet stroke was applied beside a drying edge

Explanation: The governing concept is maintaining a continuous wet edge during colour filling. If an earlier stroke begins to dry and a fresh wet stroke is placed beside it, pigment can collect at the join as the water moves and evaporates, creating a darker band. Therefore, option C is correct. Too little paint or small paper does not directly create this effect, while excess water usually causes paleness, flooding, or uneven spreading.

Correct answer: D. Gently blend the boundary with a clean, slightly damp brush

Explanation: The governing concept is soft-edge blending. A clean brush containing only a small amount of moisture can gently merge the two colours where they meet, producing a gradual transition instead of a sharp line. Thus, option D is correct. A darker colour strengthens the boundary, erasing damages the painted area, and a dry brush tends to leave separate marks rather than a smooth blend. Excess water should also be avoided.

Correct answer: A. Add a little water or lighter colour at each step

Explanation: Gradation depends on a controlled, progressive change in tone. Adding a small amount of water or a lighter colour at each successive stage creates several close values, so the dark-to-light transition appears smooth. Option A is therefore correct. A large amount of white produces an abrupt jump, black makes the mixture darker, and changing brush size alone does not change the colour value. Gentle blending between stages further improves the result.

Correct answer: B. Excessive mixing reduces colour clarity

Explanation: The governing concept is controlled wet blending. When wet colours are brushed repeatedly, pigments that should remain visually separate are stirred together too much. Their mixtures can lose brightness and clarity, producing a dull or muddy appearance; therefore, option B is correct. The paper does not simply stop absorbing, the handle does not release pigment, and excessive brushing does not make colours dry instantly. Limited, purposeful strokes preserve freshness.

Correct answer: C. Small pointed brush and controlled moisture

Explanation: The governing concept is matching the tool and moisture level to the size of the area. A small pointed brush can reach corners and follow the outline accurately, while controlled moisture prevents flooding, drips, and accidental spread. Thus, option C is correct. A large wet brush is difficult to control, a sponge lacks precision, and a dry cloth cannot apply colour neatly. Thick paint may also obscure edges and create uneven coverage.

Correct answer: D. Absorb excess colour with a clean, slightly damp brush

Explanation: The governing concept is lifting excess liquid before it dries into a hard edge. A clean brush that is slightly damp, but not dripping wet, can absorb the pooled pigment by touching the area gently. Therefore, option D is correct. Adding more colour increases the pool, leaving it may create a dark tide mark, and rubbing can roughen or tear the paper. The brush should be rinsed and blotted before lifting.

Correct answer: A. The boundary stays neat and the centre fills easily

Explanation: The governing concept is boundary control in shape filling. The edge and corners require the greatest precision, so defining them first reduces the chance of paint crossing the outline. Once the boundary is secure, the broader centre can be filled with faster, safer strokes. Option A is correct. This method does not make paint dry instantly, increase the brush’s capacity, or change the size of the picture; it improves neatness and control.

Correct answer: B. Light, controlled and repeatedly overlapping

Explanation: The governing concept is gradual blending through controlled overlapping strokes. Light pressure prevents grooves and streaks, while repeated overlap allows the edge of one colour to merge progressively with the next. Therefore, option B is correct. Fast, jerky movement produces broken marks, a fixed vertical direction is not suitable for every shape, and a motionless brush cannot blend at all. The artist should work gently while the paint remains workable.

Correct answer: C. Uneven paint consistency or heavy pressure

Explanation: The governing concept is achieving an even paint layer through consistent mixture and pressure. If the paint is too thick in some places, too thin in others, or the brush is pressed heavily, the bristles leave tracks that remain visible as streaks. Thus, option C is correct. Light paper, a large picture, or a round palette does not directly create brush marks. Mixing the paint evenly and using moderate, consistent pressure helps produce a smoother surface.

Correct answer: D. To prevent unwanted colour from moving into another area

Explanation: The governing concept is maintaining colour clarity and controlling contamination during blending. A clean, lightly damp brush can soften an edge without carrying a strong amount of the previous colour into a neighbouring area. For this reason, option D is correct. Cleaning the brush does not enlarge it, instantly dry paint, or harden paper. Rinsing and blotting between colour changes is especially useful when separate areas must remain distinct.

Correct answer: A. Lighter on the lit side and darker on the opposite side

Explanation: The governing concept is tonal modelling: light values and dark values help a flat shape appear three-dimensional. If the light source is on one side, that side of the fruit receives lighter colour, while the opposite side is shown with deeper colour; a gradual transition makes the surface look rounded. A single dark fill, an outline alone, or a blank centre cannot show the direction of light and volume as effectively.

Correct answer: B. Creating soft colour transitions in skies or clouds

Explanation: Wet-on-wet blending means placing one wet colour into another wet area. Because the moisture allows pigment to move and merge gradually, it is useful for soft transitions such as an open sky, mist, or clouds. It is not the best method for sharp geometric edges, fine lettering, or a controlled black outline, where a drier surface and precise brush control are preferred.

Correct answer: D. The colour may spread beyond the boundary

Explanation: The governing concept is water control during blending. A brush loaded with excess water can dilute the pigment and carry it beyond the intended shape, producing back-runs, uneven patches, or bleeding across a boundary. A damp brush is usually more manageable than a soaked one. Excess water does not make the brush smaller, dry the paper, or reliably increase opacity, so option D is correct.

Correct answer: C. Control of boundary and moisture

Explanation: The governing concept is controlled colour application. If background paint enters the main figure, the artist has not sufficiently controlled the boundary, the amount of water, or the drying sequence between sections. A careful edge, an appropriately damp brush, and allowing one area to dry can prevent bleeding. The colour’s name, the picture size, and the palette size do not directly control this problem, so C is correct.

Correct answer: D. Whipping the colour too quickly with the brush

Explanation: The governing concept is air entrapment during colour preparation. If paint is whipped or stirred very rapidly with a brush, air becomes mixed into it and appears as small bubbles on the surface. Therefore, option D is correct. A light colour, a small brush, or new paper does not normally introduce air into the mixture. Mixing gently and allowing bubbles to settle helps produce a smoother fill.

Correct answer: B. Sufficiently thick paint with less water

Explanation: The governing concept is opacity: a paint layer is opaque when it contains enough pigment to cover the surface and is not excessively diluted. Option B is therefore correct because sufficiently thick paint with less water forms a stronger, more solid layer. Clean water alone has no pigment, a very diluted mixture allows the paper to show through, and a brush without paint cannot create any colour layer. Water should be controlled rather than eliminated in every medium.

Correct answer: D. The two colours may mix unintentionally

Explanation: The governing concept is wet-on-wet interaction. When a second colour is placed on a still-wet first layer, water carries pigment across the boundary, so the two colours may spread together and create an unintended blend. Option D is correct. The layer is not always cleaner, the colour does not instantly disappear, and the paper does not become thicker merely because another wet layer is added. Drying first is preferable when sharp separation is required.