Colour filling and blending

Correct answer: B. They can reduce each other's intensity

Explanation: Complementary colours lie opposite each other on the colour wheel. When they are mixed excessively, their pigments absorb and neutralise parts of each other’s colour, reducing saturation and often producing a dull brownish or greyish mixture. Thus option B is correct. They do not always become white, tear the paper, or dry water; limited mixing is better when a clean, vibrant result is needed.

Correct answer: C. Blue-green mixture

Explanation: A smooth blend is made by introducing an intermediate colour that shares qualities with both endpoints. Blue-green lies between blue and green, so it can bridge the transition and reduce a sudden change in hue; option C is correct. Red and orange are not the nearest transition colours for this pair, while black would darken the mixture rather than create a clean intermediate hue.

Correct answer: D. Strokes may become broad and edges uncontrolled

Explanation: Brush pressure changes the spread and shape of the bristles. Excessive pressure splays the bristles, deposits paint over a wider area, and makes it harder to keep a neat boundary; therefore option D is correct. It does not purify the colour, automatically flatten the paper, or sharpen the brush. Light, steady pressure is especially important near small edges and outlines.

Correct answer: A. First the boundary then the inner area

Explanation: Small areas require precise edge control. Tracing or filling the boundary first establishes a visual limit; the inner area can then be filled with controlled strokes without crossing that edge, so option A is the safest sequence. Painting outside first risks spills, wetting the whole sheet is unnecessary, and beginning with a large brush reduces precision in a small decorative shape.

Correct answer: B. It may release excess water and create blooms

Explanation: During blending, the brush should carry only enough moisture to soften the transition. If it is very wet, excess water leaves the bristles and pushes pigment outward, producing blooms, tide marks, or pale uneven patches instead of a controlled blend. Therefore option B is correct. A wet brush does not make paint opaque, shrink paper, or dry the colour immediately.

Correct answer: C. A light area toward the light and darker gradation on the opposite side

Explanation: The governing concept is value gradation: a rounded object appears three-dimensional when its tones change according to the light source. The side facing the light should contain the lightest area, and the tone should gradually become darker toward the opposite side, with a deeper core shadow if needed. Therefore, option C is correct. Equal dark colour flattens the sphere, while an outline or scattered white dots does not explain its volume.

Correct answer: D. Volume and light direction will not be clear

Explanation: The governing concept is value contrast between planes. A cube has separate faces that turn in different directions, so differences in lightness and darkness help the viewer recognise its planes, volume, and the direction of illumination. If every face has exactly the same colour and value, those planes visually merge and the solid may look flat. Thus option D is correct; neat boundaries, a closed outline, or pure colour cannot by themselves show three-dimensional form.

Correct answer: A. A dark-to-light graded wash

Explanation: The governing technique is a graded wash, in which one colour changes gradually in value or strength across a surface. Applying deeper blue near the top and progressively reducing its intensity toward the horizon creates the requested atmospheric transition. Option A is therefore correct. Dots create texture rather than a continuous sky, a black boundary does not create tonal change, and one uniform colour cannot show the dark-to-light shift.

Correct answer: B. It creates a smooth transition among related warm colours

Explanation: The governing concept is colour blending within a related warm-colour family. Yellow, orange, and red are neighbouring warm hues, so placing them in that order allows their values and hues to merge gradually, producing a convincing sunset transition. Option B is correct. The sequence does not make colours cool, change the paper’s opacity, or keep the colours completely separate; those effects contradict the purpose of blending.

Correct answer: C. It is easier to control the amount of dark colour

Explanation: The governing principle is gradual tonal control. Starting with the lighter colour establishes the base, and adding the darker colour in small amounts lets the artist stop when the desired value is reached. Dark pigment is usually harder to remove once it has covered a light passage, so option C is correct. The method does not eliminate brush cleaning, guarantee white colour, or automatically make the paper wetter.

Correct answer: D. Lift some colour with a clean brush while the paint is damp

Explanation: The governing correction principle is controlled lifting of excess pigment before it dries completely. If the painted area is still damp, a clean, slightly damp brush can absorb or lift some dark colour, helping recover part of the lighter passage; the brush should be rinsed and blotted so it does not spread the pigment. Therefore option D is correct. Adding more dark paint or cutting the paper worsens the problem, while painting everything black removes the intended gradation.

Correct answer: A. Check evenness, boundaries, and unfilled gaps

Explanation: The governing quality criteria for colour filling are even coverage, controlled boundaries, and complete coverage without accidental gaps. The artist should inspect the painted area under normal viewing light and check whether the colour is distributed consistently, the edges remain within the intended outline, and no paper shows through unintentionally. Thus option A is correct. A colour name, brush price, or the back of the paper cannot adequately judge the finished application.

Correct answer: B. Smooth and gradual

Explanation: The governing concept is a continuous transition between neighbouring colours or values. In good blending, the change is smooth and gradual, so the eye does not see a harsh break, isolated band, black line, or accidental gap. Therefore option B is correct. A broken edge, black boundary, or white space separates areas rather than joining them. Light overlapping strokes and controlled pressure can help produce the required transition.

Correct answer: C. Control within the boundary will be difficult

Explanation: The governing practical principle is to match brush size to the size and shape of the area. A brush that is much larger than a small space is harder to guide accurately, so its bristles or paint load may cross the outline and create unwanted marks. Thus option C is correct. A large brush does not purify or automatically lighten the colour, and drying speed is not the main difficulty being tested.

Correct answer: D. More strokes may increase both unevenness and time

Explanation: The governing principle is efficient, even coverage through an appropriately sized brush. A very small brush covers only a narrow strip at a time, so a large area requires many strokes and joins. These repeated passes can create visible bands, uneven pressure, or inconsistent colour, and they take longer to complete. Therefore option D is correct. Muddy colour, torn paper, and loss of opacity are not inevitable results of using a small brush.

Correct answer: A. Glazing

Explanation: The governing concept is glazing, a layering technique in which a thin, transparent colour wash is placed over a completely dry painted layer. Light passes through the glaze and visually combines with the colour below, changing its hue, value, or temperature without covering it opaquely. Therefore option A is correct. Dabbing applies spots, drawing creates lines, and splattering produces scattered droplets, so those methods do not describe transparent layered colour adjustment.

Correct answer: B. The colours may mix uncontrollably

Explanation: Glazing depends on controlled, transparent layering, so the underlying paint should be dry before another layer is applied. If it remains wet, moisture allows pigments from the two layers to flow together, producing muddy or uncontrolled mixing and blurred edges. Thus option B is correct. A wet layer does not make the upper layer cleaner; it cannot strengthen the paper, and it will not always turn the colour white.

Correct answer: C. A double layer or pigment build-up formed along the edges

Explanation: The governing idea is even paint application. When a brush is repeatedly stopped, turned, or passed over the boundary, extra pigment accumulates at the edges. Those areas therefore become darker while the centre receives a thinner, more even coat and remains lighter. Option C is correct. If the centre had received more paint, as option A says, the centre should be darker; the other choices do not explain the edge-heavy deposit.

Correct answer: D. Whipping the paint or scrubbing rapidly with the brush

Explanation: The relevant concept is trapped air in the paint film. Vigorous whipping, rapid stirring, or aggressive scrubbing can introduce air and form small bubbles in the wet colour. Therefore option D is the plausible cause. A clean brush does not normally create bubbles, light colour only describes appearance, and a closed shape is a drawing condition rather than a cause of air entering the paint. Gentle mixing and controlled strokes reduce the problem.

Correct answer: C. Repeat colours or shapes in a planned sequence

Explanation: In visual composition, rhythm is created when an element such as a colour, shape, or mark is repeated with an organised order or interval. Planned repetition guides the eye across the artwork, making option C correct. Random colour placement lacks a readable beat; one large patch gives no repeated movement, and leaving forms empty supplies no colour pattern. Rhythm may be regular or varied, but it requires recognisable repetition.

Correct answer: D. Use a related colour scheme and a consistent filling style

Explanation: Unity means that different parts still feel visually connected. A related colour scheme, such as neighbouring or deliberately coordinated colours, links the shapes, while a consistent filling method repeats the same visual language. Therefore option D is correct. Unrelated textures and random colour choices weaken connection, and erasing every boundary is unnecessary; unity does not require removing the identity of each shape.

Correct answer: A. The two colours merge more evenly

Explanation: Paint consistency controls how quickly and how far a colour flows. If two colours have approximately similar thickness and moisture, they move at comparable rates, allowing a gradual, controllable transition during blending. Thus option A is correct. Consistency does not change the brush’s length or harden the paper, and matching consistency cannot make colours dry automatically. The exact mixture depends on the medium, but comparable flow improves control.

Correct answer: B. The transition may become uneven and difficult to control

Explanation: The governing concept is compatible flow during blending. A thin colour spreads quickly and may travel farther, while a thick colour moves slowly and resists spreading. Their different flow rates can create a patchy boundary or an uneven transition that is difficult to control, so option B is correct. They will not necessarily remain separate, turn black, or break the brush. Adjusting medium or water can bring their consistencies closer.

Correct answer: C. The effect of curvature and volume is created

Explanation: The governing concept is value modelling: light and dark versions of the same hue describe how light falls on a form. In a leaf, a lighter green can indicate the illuminated area, while a darker green suggests a fold, edge, or shadow. Their gradual blending creates an impression of curvature and volume, so option C is correct. Option A is the opposite effect; B and D do not describe a painting result.

Correct answer: A. The actual value, flow and consistency of the colour

Explanation: A test stroke is a practical checking step before applying paint to the final work. It reveals the colour’s actual value, opacity, wetness, flow, and consistency on a similar surface. The artist can then add water or pigment and adjust brush loading if necessary. Therefore option A is correct. The price of the brush, paper length, and painting title cannot be learned from the stroke.