Colour filling and blending

Correct answer: B. Different paint amounts or overlap in each stroke

Explanation: The governing concept is consistency of brush loading and stroke overlap. If one stroke carries more pigment or overlaps a previous stroke unevenly, extra colour accumulates in bands and the fill loses uniformity. Therefore, option B is correct. Paper size, a clean brush, and a simple subject do not by themselves create dark stripes; the problem is uneven paint distribution.

Correct answer: C. To avoid wasting too much paint before obtaining the desired colour

Explanation: The governing concept is controlled colour mixing. Testing a small sample allows the artist to observe the hue, value, and intensity before preparing a larger quantity. If the mixture is too dark, light, warm, or cool, its proportions can be adjusted with less waste. Therefore, option C is correct. Making a brush hard, wetting paper, or reducing the painting size does not explain the purpose of a test mixture.

Correct answer: D. Add a small amount of a suitable warm colour

Explanation: The governing concept is colour temperature and gradual correction. A mixture that appears too cool can usually be brought toward the desired balance by adding a compatible warm colour in a very small quantity, then testing the result. Option D is correct because it changes the colour relationship without unnecessarily darkening or diluting it. Black changes value, water changes transparency, and erasing is not a colour-balancing method.

Correct answer: A. The contrast between light and dark areas may weaken

Explanation: The governing concept is tonal modelling: light, middle tone, and dark tone must work together to show form. When the middle tone spreads too widely, it occupies much of the transition and leaves less visual separation between the light and shadow areas. Thus option A is correct because contrast and dimensional clarity may weaken. It cannot make paper thicker, guarantee drying, or automatically sharpen the painting.

Correct answer: B. Blend the boundary gently into a middle tone with a clean damp brush

Explanation: The governing concept is a gradual tonal transition in form modelling. A hard boundary between light and shadow can be softened by using a clean, slightly damp brush and blending the edge into a middle tone. Option B is correct because it creates a controlled transition rather than an abrupt mark. Adding black increases the harshness, painting everything white removes the modelling, and folding paper has no artistic correction value.

Correct answer: C. Use controlled repetition of colours or tones

Explanation: The governing concept is visual rhythm, which is created when related visual elements recur in an organised way. Repeating selected colours or tones at planned intervals guides the eye through the composition and connects separate areas. Option C is correct, although repetition should include suitable variation so the work does not become monotonous. Random colouring, making every colour black, or leaving the surface blank cannot establish purposeful colour rhythm.

Correct answer: D. The distinction between the main subject and supporting areas may weaken

Explanation: The governing concept is visual hierarchy. Differences in colour intensity help direct attention, separate the focal subject from supporting areas, and suggest depth or emphasis. If every area has equal intensity, no part receives clear priority, so the distinction between the main subject and background may weaken. Option D is correct. Equal intensity does not automatically create three-dimensional form, transparency, or removal of brush marks.

Correct answer: A. Colour ratios strokes and transitions can be compared

Explanation: The governing concept is practice through controlled comparison. A sample strip provides a small, organised area in which different colour ratios, stroke directions, paint loads, and blending transitions can be tested side by side. This helps the learner select a suitable mixture before applying it to the final work, so option A is correct. It does not increase paper value, alter brush length, or complete a painting automatically.

Correct answer: B. Shape surface medium light and intended visual effect

Explanation: The governing concept is purposeful technique selection. The artist should consider the subject’s shape, the working surface, the medium being used, the direction and quality of light, and the intended visual effect before choosing how to fill or blend. Option B is correct because it combines these relevant factors. Brush price, paper name alone, or the number of available colours cannot by themselves determine the most suitable technique.

Correct answer: A. Maintain an even paint load and overlapping strokes in one direction

Explanation: The governing concept is even application over a continuous surface. Bands usually appear when the brush carries uneven paint or when adjacent strokes do not connect smoothly. Maintaining a consistent paint load, using overlapping strokes in one direction, and keeping a continuous working edge produces a more uniform fill. Therefore, option A is correct. Changing colour, using a completely dry brush, or leaving edges unpainted would make the surface less consistent.

Correct answer: B. The boundary should be gently blended with a clean, slightly damp brush

Explanation: The governing concept is soft-edge blending between adjacent colours. A clean brush with only slight moisture can gently work across the meeting area, allowing the two colours to transition without creating a new mark. Option B is correct. A black line would make the boundary harder, complete drying would fix the edge instead of softening it, and dry powder is not a controlled blending method. Excess water should be avoided because it can cause blooms or unwanted spreading.

Correct answer: C. There was insufficient overlap between strokes

Explanation: The governing concept is continuous paint coverage. When one stroke ends before the next stroke reaches it, the unpainted paper remains visible as a white gap. Therefore, option C is correct: each new stroke should slightly overlap the previous stroke while maintaining even pressure and paint load. Dark colour, paper size, or brush cleanliness does not directly create these gaps.

Correct answer: D. The paint concentration was not changed gradually

Explanation: The governing concept of gradation is a progressive change in value or paint concentration. If pigment or water is added suddenly, the tone jumps from light to dark instead of changing smoothly. Thus option D is correct. A clean brush and flat paper generally support control, while using one unchanged colour alone does not explain an abrupt tonal break.

Correct answer: A. To keep the colour and consistency uniform throughout the area

Explanation: The governing concept is consistency of colour mixture during application. If a painter runs out and mixes a second batch midway, its hue, value, or thickness may differ, producing visible variation in one area. Therefore, option A is correct: preparing enough paint helps maintain a uniform result. The other choices do not describe a valid purpose of palette preparation.

Correct answer: B. By using limited strokes and cleaning the brush periodically

Explanation: The governing concept is controlled blending: colours should merge only at their boundary, not be repeatedly stirred across the whole area. Option B is correct because a few gentle strokes and a periodically cleaned brush preserve colour clarity and prevent unwanted pigment transfer. Excess water can cause spreading, black paint darkens the mixture, and folding paper has no useful role in preventing muddy colour.

Correct answer: C. Curve the strokes according to the roundness of the circle

Explanation: The governing concept is that brush direction can describe form. On a round object, curved strokes that follow the contour suggest its surface turning around a volume, so option C is correct. Merely darkening the outline does not model the interior form, leaving the circle flat. Leaving it white or using only dots does not provide the intended continuous form-following coverage.

Correct answer: D. Remove excess water from the brush and use thicker paint

Explanation: The governing concept is controlling paint consistency and moisture. Excess water dilutes the paint, lowers its viscosity, and lets it flow beyond the intended boundary. Therefore, option D is the immediate correction: blot excess water and use a suitably thicker mixture. Adding water worsens spreading, faster application does not remove moisture, and pressing harder can push paint farther outside the edge.

Correct answer: A. Due to uneven paint load and water quantity

Explanation: The governing concept is uniform paint load and water-to-pigment ratio. When some strokes carry more pigment or more water than others, their value and transparency differ, creating light and dark patches. Thus option A is correct. A clean brush is helpful, while white paper and a closed shape do not by themselves create uneven tonal areas if the mixture and application remain consistent.

Correct answer: B. When the colours are still damp but not excessively wet

Explanation: The governing concept is wet or damp blending. When adjacent colours are still damp, their edges can merge gradually under light brush movement, producing a controlled transition. Therefore, option B is correct. Completely dry paint has a hard boundary and usually needs rewetting, while excessive wetness causes uncontrolled bleeding. The other choices do not describe a workable blending stage.

Correct answer: C. The boundary remains neat and the inside can be filled more quickly

Explanation: The governing concept is boundary control during area filling. Painting the edges first establishes a neat limit, after which broader strokes can cover the interior with less risk of crossing the outline. Therefore, option C is correct. This sequence does not automatically darken the colour, increase the brush’s capacity, or dry the paper; its main benefit is cleaner, faster coverage inside the boundary.

Correct answer: C. A dark band or lap mark

Explanation: The governing concept is maintaining a wet working edge. If an earlier edge dries and a fresh wet stroke overlaps it, pigment can accumulate at the join, making a darker band known as a lap mark. Thus option C is correct. A uniform layer requires joining strokes while the edge remains workable; a gradient needs deliberate value change, and drying does not create a colourless area by itself.

Correct answer: B. Use less water and sufficient paint

Explanation: Opacity means that the paint covers the surface and allows little or no paper to show through. Using less water with sufficient pigment produces a thicker, more concentrated layer, so option B is correct. Excessive water creates a transparent wash; an empty brush deposits no colour; and lifting paint removes coverage rather than increasing it.

Correct answer: C. Reduce the amount of dark colour and use light strokes

Explanation: Controlled blending depends on gradually changing value rather than placing a large amount of dark pigment at once. Reduce the dark colour, remove excess paint if necessary, and use light strokes to build the darker value step by step; therefore option C is correct. Adding more dark colour worsens the spread, soaking the brush is ineffective, and removing the light base destroys the intended transition.

Correct answer: D. The colour may gradually become diluted and uneven

Explanation: The governing concept is control of the water-to-pigment ratio. After rinsing, water remains between the bristles; if the brush is not blotted, that water enters the paint and dilutes it. The resulting colour may spread unevenly and create patchy filling, so option D is correct. Extra water does not increase opacity, clean the outline, or dry the brush.

Correct answer: A. Gradually change the ratio of paint and water

Explanation: Value describes how light or dark a colour appears. In watercolour, increasing the amount of water makes a lighter wash, while using more pigment and less water produces a darker wash. Gradually changing this ratio creates a connected scale of the same hue, so option A is correct. New colours, black paint, or different paper do not preserve the same-colour value progression.