Colour filling and blending

Correct answer: B. Paint moisture and consistency can be checked

Explanation: The governing concept is testing and controlling a painting stroke before applying it to the final work. A practice stroke shows whether the paint is too wet, too thick, too thin, or uneven, and it helps the artist adjust the water-to-paint balance and brush pressure. Therefore, option B is correct. Testing cannot enlarge the picture, make paper colour itself, or increase the number of brushes. It reduces mistakes and helps produce a more consistent final layer.

Correct answer: C. Fill carefully with a small brush

Explanation: The governing technique is precise colour filling in small or restricted areas. A small brush has a narrow tip that can reach into corners and along edges, allowing the artist to cover the paper neatly without crossing the outline. Hence, option C is correct. Large, fast strokes are harder to control and may leave gaps or spill over the boundary. Leaving the corner uncoloured creates the very white gap being avoided, while folding the paper does not improve colour control.

Correct answer: D. Light and controlled pressure

Explanation: The governing concept is pressure control during blending. Light, steady, and controlled pressure allows the brush or drawing tool to move gradually from one colour into the other, producing a soft transition without harsh boundaries. Therefore, option D is correct. Very heavy pressure can create dark patches, flatten the stroke, or damage the paper, while irregular pressure causes streaks. Pressing only at one spot prevents an even transition across the blending area.

Correct answer: A. Apply light, even strokes before it dries

Explanation: The governing concept is achieving an even colour layer through timely, consistent brushwork. If the paint is still moist, light strokes in one direction can redistribute it and reduce streaks or patches before the layer sets. Thus, option A is correct. Hard scraping may tear the paper or remove paint, adding unrelated colours makes the surface less uniform, and folding can crack or damage the painted sheet. The artist should work gently and avoid repeatedly disturbing a nearly dry layer.

Correct answer: B. To remove excess water from the brush

Explanation: The governing concept is controlling moisture while blending, especially with water-based paints. A clean cloth or tissue can gently absorb extra water from the brush, leaving it damp rather than dripping. This helps prevent watery patches, uncontrolled spreading, and accidental dilution of the colour, so option B is correct. The tissue does not colour the handle, cut paper, or darken paint directly. It should be clean so that unwanted pigment or dust is not transferred to the artwork.

Correct answer: C. Allow the colour to dry

Explanation: The governing concept is protecting a wet painted surface while it dries. The colour should be allowed to dry sufficiently before the artwork is touched, because contact with wet paint can spread pigment, create fingerprints, and disturb a smooth layer. Therefore, option C is correct. Pouring water adds moisture, folding may damage the sheet, and rubbing with a brush can smear or lift the fresh colour. Drying time depends on the medium, layer thickness, paper, and surrounding conditions.

Correct answer: D. A smudge may form

Explanation: The governing concept is careful handling of wet paint. When a hand touches a wet colour layer, the pigment can transfer to the fingers, spread across the paper, or leave a fingerprint, producing a smudge. Thus, option D is correct. Touching does not make the colour more even, enlarge the painting, or clean the brush. To protect the work, the artist should wait until the layer is dry and hold the sheet by an unpainted edge whenever possible.

Correct answer: A. To maintain the same colour throughout the area

Explanation: The governing concept is colour consistency during filling. If enough paint of the same mixture is prepared first, the artist can cover the whole area with a similar hue, value, and strength without stopping to recreate the mixture. This makes the surface look even and avoids an accidental patch or visible change in tone. Therefore, option A is correct; the other choices concern the brush, paper weight, or drying, none of which is achieved by preparing more colour.

Correct answer: B. A gradual colour transition

Explanation: The governing concept is gradation, in which a colour changes through several intermediate tones rather than switching suddenly. These light steps reduce a sharp boundary and create a smooth transition from the starting colour to the next one. Thus option B is correct. A hard outline is an abrupt edge, while paper cutting and isolated dots are unrelated to gradual colour blending. The more carefully the intermediate tones are controlled, the smoother the visual result appears.

Correct answer: C. Smooth blending of warm colours

Explanation: A sunset sky is commonly represented by related warm hues such as yellow, orange, and red changing gradually across the sky. Smooth blending helps one colour merge into the next and avoids distracting hard bands. Therefore option C is correct. A black outline, isolated dots, or leaving the paper blank cannot show the atmospheric colour transition that gives a sunset its characteristic appearance. The colours should be applied gently and blended before the paint dries too much.

Correct answer: D. Gradually lighten the colour toward the bottom

Explanation: The governing concept is tonal gradation: changing the value of one colour gradually across a surface. To make the lower sky appear lighter, reduce the strength of the blue, use a lighter mixture, or blend toward a paler tone as you move downward. Option D describes this controlled transition. Adding black or using the same dark blue would make the lower area darker, while leaving it blank would break the painted sky rather than create a gradual effect.

Correct answer: A. To show volume in the leaf

Explanation: The governing concept is modelling form through light and shade. A lighter green can represent the part facing the light, while a darker green can suggest a turned, recessed, or shadowed part of the leaf. Blending these values produces a sense of thickness and curved volume, so option A is correct. Erasing, wetting the paper, and cleaning the brush are separate actions and do not explain why two green tones are blended on the leaf.

Correct answer: B. The petal shows softness and form

Explanation: The governing concept is tonal gradation used to suggest form. When the colour becomes lighter from the centre toward the edge, the gradual value change indicates a curved, delicate surface and gives the petal softness and volume. Therefore option B is correct. A single uniform tone is more likely to make a petal look flat; the process does not cut the paper or make the colour disappear. The transition should be blended gently without a hard boundary.

Correct answer: C. Near the edges and corners

Explanation: The governing technique is controlled edge filling. Working carefully near the corners and boundaries first establishes the square’s shape and prevents paint from crossing the outline. Once the edges are secure, the larger central area can be filled with broader, more confident strokes. Therefore option C is correct. Starting only in the centre does not control the boundary, while painting outside or on the back of the paper cannot produce a neat square.

Correct answer: D. Add a small amount of the other colour and blend it gently

Explanation: The governing concept is controlled correction and colour balance. If one hue dominates, adding a small amount of the neighbouring or weaker colour and blending gently can reduce the visual imbalance without disturbing the whole area. Option D is correct. Adding more of the dominant colour would intensify the problem, while erasing everything or folding the paper is unnecessary and does not teach a practical blending correction. Small additions are easier to control than a large corrective layer.

Correct answer: A. Light and shadow can be placed correctly

Explanation: The governing concept is pre-planned value structure. Deciding where the light and dark areas will be placed before applying paint keeps the light direction consistent and helps the artist preserve form, depth, and readable shading. Therefore option A is correct. Planning does not increase brush length, change the paper’s basic colour, or make a painting erase faster. It is a visual preparation step that prevents random tones and makes later blending more controlled.

Correct answer: B. To prevent unwanted colour mixing

Explanation: The governing concept is organised palette management. Separating paint portions prevents neighbouring colours from accidentally touching, spreading, or becoming muddy before the artist intentionally mixes them. The clean space also provides room to combine measured amounts and create a controlled blend. Thus option B is correct. Spacing colours does not make the palette heavier, speed drying, or change the size of a brush. It protects colour purity and supports deliberate mixing.

Correct answer: B. Regular practice and control of water and colour

Explanation: Successful colour filling and blending depend on regular practice and controlled use of water and pigment. Practice improves hand movement, pressure, edge control, and the ability to blend without harsh patches. Water and colour must be adjusted according to the desired transparency and smoothness. New paper alone cannot create skill, a dirty brush contaminates colours, and overmixing can make colours dull. Therefore, option B is correct.

Correct answer: A. Keep the outlines clear

Explanation: Clear outlines provide the boundaries that guide colour placement inside each part of a drawing. Keeping them visible helps the student work neatly, prevents accidental spreading beyond the shape, and preserves the recognisable structure of the picture. Erasing the outlines removes the guide, folding the paper does not improve application, and colours cannot be dried before they are applied. Hence, option A is correct.

Correct answer: A. From the centre towards the outside

Explanation: Beginning near the centre and moving gradually towards the outside can help distribute colour while leaving the boundary for careful finishing. This approach gives better control over the edge and reduces the chance of pushing wet paint beyond the outline. Working from the back is impossible for normal surface application, starting outside ignores the shape, and a random dry area is not a reliable method. Thus, option A is the intended correct answer.

Correct answer: A. Colour gradation

Explanation: A gradual transition from a light colour to a dark colour creates colour gradation, also called a smooth change of value. It can suggest light, depth, roundness, or volume because the tone changes progressively rather than abruptly. Strong contrast requires clearly different colours or values placed together, while paper texture and white space are unrelated results. Therefore, option A is correct.

Correct answer: A. White

Explanation: The governing concept is value: adding white to a colour raises its lightness and creates a tint. Therefore, white is the correct choice. Black lowers value and creates a shade, while brown and violet change the hue rather than simply lightening it. White should be added gradually because too much can make the colour weak or chalky. This principle is useful when preparing light areas, highlights, or soft poster backgrounds.

Correct answer: C. Black

Explanation: The governing concept is colour value, which describes how light or dark a colour appears. Mixing a small amount of black with another colour generally lowers its value and produces a darker shade, so black is correct. White would raise the value and create a tint. Yellow or pink may alter the hue and brightness, but they are not the standard answer for making a colour darker. Black must be added sparingly because it can quickly overpower the original colour.

Correct answer: A. Colour may spread

Explanation: The governing technique is water control. When a brush holds too much water, the paint becomes overly diluted and can flow beyond the intended area, causing the colour to spread, run, or form uneven patches. Thus, option A is correct. Excess water does not make paper hard or make paint dry instantly; a very wet brush usually slows drying. A suitable amount of moisture helps the colour move smoothly while keeping edges controlled.

Correct answer: A. Let the first layer dry

Explanation: The governing concept is controlled layering. The first layer should be allowed to dry before another layer is applied, because a dry surface prevents wet colours from mixing accidentally, lifting, or spreading into unwanted areas. Therefore, option A is correct. Tearing, scratching, or folding the paper damages the artwork and does not improve layering. The exact drying time depends on the amount of water and the medium, so the surface should be checked gently before continuing.