Class 9 Art Education - Painting Techniques - Colour filling and blending Hard Quiz

Level 92 • 15/50 questions • 30 seconds per question.

Level readiness 15/50 Questions
Time Left 07:30 30 sec/question
RewardsCoins + XP
ModeClassic Quiz
Share
This level needs 35 more active questions. Admin panel me same class, subject, difficulty aur level_no 92 par question add karein.
Question 1 / 15 0 score
Answered 0/15 Correct 0 Time 07:30

एक समान सपाट रंग परत बनाते समय स्ट्रोक के किनारे पर गहरा रंग जमा होने का मुख्य कारण क्या है?

What is the main cause of dark colour collecting at the edge of strokes while creating an even flat wash?

Explanation opens after your attempt
Correct Answer

B. रंग का सूखता किनारा और असमान नमीA drying edge and uneven moisture

Step 1

Concept

Applying a new wet stroke beside a drying edge can cause pigment to collect and form a dark line. Keep strokes connected.

Step 2

Why this answer is correct

The correct answer is B. रंग का सूखता किनारा और असमान नमी / A drying edge and uneven moisture. Applying a new wet stroke beside a drying edge can cause pigment to collect and form a dark line. Keep strokes connected.

Step 3

Exam Tip

सूखते किनारे पर नया गीला स्ट्रोक लगाने से रंग जमा होकर गहरी रेखा बना सकता है। परीक्षा में जुड़े हुए स्ट्रोक बनाए रखें।

Open Question Page
Ask Friends

सूखे ब्रश से खुरदरी बनावट बनाते समय रंग सतह के केवल ऊंचे भागों पर क्यों रहता है?

Why does colour remain mainly on the raised parts of a surface during dry-brush work?

Explanation opens after your attempt
Correct Answer

A. ब्रश में कम नमी होने के कारणBecause the brush has little moisture

Step 1

Concept

A brush with little moisture does not reach the lower grooves and leaves colour on raised areas. Link this with texture.

Step 2

Why this answer is correct

The correct answer is A. ब्रश में कम नमी होने के कारण / Because the brush has little moisture. A brush with little moisture does not reach the lower grooves and leaves colour on raised areas. Link this with texture.

Step 3

Exam Tip

कम नमी वाला ब्रश सतह की गहराइयों तक नहीं पहुंचता और ऊंचे भागों पर निशान छोड़ता है। परीक्षा में इसे बनावट से जोड़ें।

Open Question Page
Ask Friends

गीले पर गीला तकनीक में रंग के अनियंत्रित फैलाव को कम करने का सबसे प्रभावी उपाय क्या है?

What is the most effective way to reduce uncontrolled spreading in the wet-on-wet technique?

Explanation opens after your attempt
Correct Answer

B. सतह की अतिरिक्त नमी हटानाRemove excess moisture from the surface

Step 1

Concept

Removing excess moisture reduces paint flow and gives more control. Understand the difference between damp and soaked surfaces.

Step 2

Why this answer is correct

The correct answer is B. सतह की अतिरिक्त नमी हटाना / Remove excess moisture from the surface. Removing excess moisture reduces paint flow and gives more control. Understand the difference between damp and soaked surfaces.

Step 3

Exam Tip

अतिरिक्त नमी हटाने से रंग का बहाव कम होता है और फैलाव अधिक नियंत्रित रहता है। परीक्षा में नम और भीगी सतह का अंतर समझें।

Open Question Page
Ask Friends

एक सूखी रंग परत पर पारदर्शी दूसरी परत लगाते समय ब्रश को बार बार चलाना क्यों उचित नहीं है?

Why is repeated brushing not suitable while applying a transparent second layer over a dry colour layer?

Explanation opens after your attempt
Correct Answer

D. नीचे की परत उठकर रंग मैला कर सकती हैThe lower layer may lift and make the colour muddy

Step 1

Concept

Excessive brushing may reactivate the dry colour and mix the layers. Use fewer light strokes.

Step 2

Why this answer is correct

The correct answer is D. नीचे की परत उठकर रंग मैला कर सकती है / The lower layer may lift and make the colour muddy. Excessive brushing may reactivate the dry colour and mix the layers. Use fewer light strokes.

Step 3

Exam Tip

अधिक रगड़ सूखे रंग को दोबारा सक्रिय कर सकती है और परतों को मिला सकती है। परीक्षा में कम और हल्के स्ट्रोक लगाएं।

Open Question Page
Ask Friends

यदि फ्लैट वॉश में ऊपर का भाग गहरा और नीचे का भाग हल्का हो रहा हो तो संभावित कारण क्या है?

What is a likely reason if the upper part of a flat wash is darker and the lower part is lighter?

Explanation opens after your attempt
Correct Answer

A. ब्रश में रंग की मात्रा धीरे धीरे कम होनाThe amount of paint in the brush gradually decreases

Step 1

Concept

As paint in the brush decreases the lower strokes may become lighter. Reload with the same mixture.

Step 2

Why this answer is correct

The correct answer is A. ब्रश में रंग की मात्रा धीरे धीरे कम होना / The amount of paint in the brush gradually decreases. As paint in the brush decreases the lower strokes may become lighter. Reload with the same mixture.

Step 3

Exam Tip

ब्रश में रंग कम होते जाने से नीचे के स्ट्रोक हल्के बन सकते हैं। परीक्षा में ब्रश को समान मिश्रण से दोबारा भरें।

Open Question Page
Ask Friends

डबल लोडेड फ्लैट ब्रश से एक स्ट्रोक में दो रंग स्पष्ट रखने के लिए क्या आवश्यक है?

What is necessary to keep two colours distinct in one stroke with a double-loaded flat brush?

Explanation opens after your attempt
Correct Answer

C. दोनों किनारों पर अलग रंग लेकर सीमित मिश्रण करनाLoad separate colours on each edge with limited blending

Step 1

Concept

Separate edge loading with limited blending keeps both colours visible in one stroke. Avoid overmixing.

Step 2

Why this answer is correct

The correct answer is C. दोनों किनारों पर अलग रंग लेकर सीमित मिश्रण करना / Load separate colours on each edge with limited blending. Separate edge loading with limited blending keeps both colours visible in one stroke. Avoid overmixing.

Step 3

Exam Tip

अलग किनारों पर रंग और सीमित मिश्रण से दोनों रंग एक स्ट्रोक में दिखाई देते हैं। परीक्षा में अधिक मिलाने से बचें।

Open Question Page
Ask Friends

यदि नम ब्रश से सूखे किनारे को मुलायम करते समय रंग बाहर फैल जाए तो मुख्य त्रुटि क्या है?

What is the main error if colour spreads outward while softening a dry edge with a damp brush?

Explanation opens after your attempt
Correct Answer

B. ब्रश में आवश्यकता से अधिक पानी थाThe brush contained too much water

Step 1

Concept

Excess water can reactivate too much dry colour and make it flow outward. Use a damp rather than soaked brush.

Step 2

Why this answer is correct

The correct answer is B. ब्रश में आवश्यकता से अधिक पानी था / The brush contained too much water. Excess water can reactivate too much dry colour and make it flow outward. Use a damp rather than soaked brush.

Step 3

Exam Tip

अधिक पानी सूखे रंग को ज्यादा सक्रिय करके उसे बाहर बहा सकता है। परीक्षा में नम ब्रश लें न कि भीगा हुआ।

Open Question Page
Ask Friends

स्कम्बलिंग में नीचे की रंग परत का कुछ भाग दिखाई देना क्यों आवश्यक है?

Why should part of the lower colour layer remain visible in scumbling?

Explanation opens after your attempt
Correct Answer

D. इससे टूटी हुई बनावट और दृश्य गहराई बनती हैIt creates broken texture and visual depth

Step 1

Concept

The irregular upper layer in scumbling partly reveals the colour below. Distinguish it from complete flat coverage.

Step 2

Why this answer is correct

The correct answer is D. इससे टूटी हुई बनावट और दृश्य गहराई बनती है / It creates broken texture and visual depth. The irregular upper layer in scumbling partly reveals the colour below. Distinguish it from complete flat coverage.

Step 3

Exam Tip

स्कम्बलिंग की अनियमित ऊपरी परत नीचे के रंग को आंशिक रूप से दिखाती है। परीक्षा में इसे पूर्ण सपाट आवरण से अलग पहचानें।

Open Question Page
Ask Friends

एक पारदर्शी रंग परत में अनचाहे ब्रश निशान दिखाई देने का प्रमुख कारण क्या हो सकता है?

What can be a major cause of unwanted brush marks in a transparent colour layer?

Explanation opens after your attempt
Correct Answer

B. रंग का असमान गाढ़ापन और बार बार ब्रश चलानाUneven paint consistency and repeated brushing

Step 1

Concept

Uneven mixture and excessive brushing can leave streaks in a transparent layer. Use an even mixture and fewer strokes.

Step 2

Why this answer is correct

The correct answer is B. रंग का असमान गाढ़ापन और बार बार ब्रश चलाना / Uneven paint consistency and repeated brushing. Uneven mixture and excessive brushing can leave streaks in a transparent layer. Use an even mixture and fewer strokes.

Step 3

Exam Tip

असमान मिश्रण और अधिक ब्रशिंग पारदर्शी परत में धारियां छोड़ सकते हैं। परीक्षा में पतला समान मिश्रण और कम स्ट्रोक रखें।

Open Question Page
Ask Friends

यदि रंग भरते समय कागज की सतह घिसने लगे तो कलाकार को सबसे पहले क्या बदलना चाहिए?

What should the artist change first if the paper surface begins to wear while applying colour?

Explanation opens after your attempt
Correct Answer

C. दबाव और बार बार रगड़ना कम करनाReduce pressure and repeated rubbing

Step 1

Concept

Excess pressure and repeated strokes damage paper fibres. Use light and decisive strokes.

Step 2

Why this answer is correct

The correct answer is C. दबाव और बार बार रगड़ना कम करना / Reduce pressure and repeated rubbing. Excess pressure and repeated strokes damage paper fibres. Use light and decisive strokes.

Step 3

Exam Tip

अधिक दबाव और बार बार स्ट्रोक सतह के रेशों को नुकसान पहुंचाते हैं। परीक्षा में हल्के निर्णायक स्ट्रोक का उपयोग करें।

Open Question Page
Ask Friends

एक गीली रंग परत पर नया रंग डालने से दोनों रंग पूरी तरह मैला हो जाएं तो क्या सुधार करना चाहिए?

What should be corrected if two colours become completely muddy when a new colour is added to a wet layer?

Explanation opens after your attempt
Correct Answer

B. मिश्रण और ब्रश संचालन को सीमित करनाLimit mixing and brush movement

Step 1

Concept

Overmixing and repeated brushing can make colours lose clarity. Allow colours to blend in a controlled way.

Step 2

Why this answer is correct

The correct answer is B. मिश्रण और ब्रश संचालन को सीमित करना / Limit mixing and brush movement. Overmixing and repeated brushing can make colours lose clarity. Allow colours to blend in a controlled way.

Step 3

Exam Tip

अधिक मिलाने और बार बार ब्रश चलाने से रंग अपनी स्पष्टता खो सकते हैं। परीक्षा में रंगों को नियंत्रित रूप से मिलने दें।

Open Question Page
Ask Friends

यदि बड़े क्षेत्र में रंग भरते समय कुछ स्ट्रोक चमकीले और कुछ फीके दिखें तो मुख्य कारण क्या हो सकता है?

What may be the main reason if some strokes appear bright and others dull while colouring a large area?

Explanation opens after your attempt
Correct Answer

A. रंग और पानी का अनुपात असमान होनाUneven ratio of paint and water

Step 1

Concept

Using mixtures of different consistency changes the tone of strokes. Prepare enough mixture beforehand.

Step 2

Why this answer is correct

The correct answer is A. रंग और पानी का अनुपात असमान होना / Uneven ratio of paint and water. Using mixtures of different consistency changes the tone of strokes. Prepare enough mixture beforehand.

Step 3

Exam Tip

हर बार अलग सघनता का मिश्रण लेने से स्ट्रोक का टोन बदल जाता है। परीक्षा में मिश्रण को पहले पर्याप्त मात्रा में तैयार करें।

Open Question Page
Ask Friends

रंग की पहली परत पूरी तरह सूखे बिना दूसरी परत लगाने पर कौन सा परिणाम हो सकता है?

What can happen if a second colour layer is applied before the first layer is fully dry?

Explanation opens after your attempt
Correct Answer

C. परतें अनचाहे मिल सकती हैं और किनारे धुंधले हो सकते हैंThe layers may mix unintentionally and edges may blur

Step 1

Concept

A wet first layer can pull in the second colour and reduce clarity. Allow drying time in layering.

Step 2

Why this answer is correct

The correct answer is C. परतें अनचाहे मिल सकती हैं और किनारे धुंधले हो सकते हैं / The layers may mix unintentionally and edges may blur. A wet first layer can pull in the second colour and reduce clarity. Allow drying time in layering.

Step 3

Exam Tip

गीली पहली परत दूसरी परत के रंग को खींच सकती है और स्पष्टता कम कर सकती है। परीक्षा में परत तकनीक में सूखने का समय दें।

Open Question Page
Ask Friends

रंग की एक परत में छोटे बुलबुले बनने पर सबसे संभावित ब्रश संबंधी कारण क्या है?

What is the most likely brush-related cause of small bubbles forming in a colour layer?

Explanation opens after your attempt
Correct Answer

D. रंग को ब्रश से अत्यधिक तेजी और बार बार फेंटनाWhipping the paint too quickly and repeatedly with the brush

Step 1

Concept

Excessive whipping can introduce air into the mixture and create bubbles. Mix the paint gently.

Step 2

Why this answer is correct

The correct answer is D. रंग को ब्रश से अत्यधिक तेजी और बार बार फेंटना / Whipping the paint too quickly and repeatedly with the brush. Excessive whipping can introduce air into the mixture and create bubbles. Mix the paint gently.

Step 3

Exam Tip

अत्यधिक फेंटने से मिश्रण में हवा प्रवेश कर सकती है और बुलबुले बन सकते हैं। परीक्षा में रंग को धीरे मिलाएं।

Open Question Page
Ask Friends

एक बड़े वॉश में नीचे की ओर बनते रंग के छोटे जमाव को नियंत्रित करने का सही तरीका क्या है?

What is the correct way to control a small pool of colour forming at the lower edge of a large wash?

Explanation opens after your attempt
Correct Answer

A. साफ हल्के नम ब्रश से अतिरिक्त रंग सोखनाLift excess colour with a clean slightly damp brush

Step 1

Concept

A clean slightly damp brush can absorb excess colour without greatly disturbing the layer. Do not use a completely dry brush.

Step 2

Why this answer is correct

The correct answer is A. साफ हल्के नम ब्रश से अतिरिक्त रंग सोखना / Lift excess colour with a clean slightly damp brush. A clean slightly damp brush can absorb excess colour without greatly disturbing the layer. Do not use a completely dry brush.

Step 3

Exam Tip

साफ हल्का नम ब्रश अतिरिक्त रंग को सोख सकता है बिना परत को अधिक बिगाड़े। परीक्षा में ब्रश को बहुत सूखा न रखें।

Open Question Page
Ask Friends
FAQs

Class 9 Art Education Quiz FAQs

How many questions are in this quiz?

This level is designed for 50 active questions. Currently 15 questions are available for the selected class and difficulty.

Is there a timer in this quiz?

Yes, the timer uses 30 seconds per question for Hard difficulty and shows the total remaining time on the page.

Can I open each question separately?

Yes, every question has its own SEO-friendly page with answer, explanation and related practice links.