Brush techniques

Correct answer: C. The upper paint was too thick and heavily applied

Explanation: The governing concept of scumbling is broken, relatively dry brushwork that allows parts of the lower colour to remain visible. If the upper paint is thick and heavily loaded, it forms a solid covering layer and hides the underpainting. Therefore option C is correct. A and D generally help reveal the lower layer, while surface roughness alone is not the most likely cause.

Correct answer: C. Visual hierarchy and depth may weaken

Explanation: The governing concept is edge hierarchy. Hard edges attract attention and describe precise boundaries, while softer edges allow areas to recede and connect. If every edge is equally sharp, no focal area receives special emphasis, and the image may appear uniformly cut out, reducing depth and visual hierarchy. Thus C is correct. Equal sharpness does not automatically alter transparency, mix every colour, or damage brush bristles.

Correct answer: D. The main form may lose clarity and focus

Explanation: The governing concept is the balance between soft and hard edges. Soft edges suggest atmosphere, distance, or gentle transitions, but a painting also needs selected sharp edges to define important contours and direct attention. If every edge is soft, the main form may appear vague and the focal point can lose clarity; therefore D is correct. Soft edges do not make objects heavy, turn colour black, or physically tear the paper.

Correct answer: A. A flat or bright brush with firm bristles

Explanation: The governing concept is matching brush stiffness to paint consistency. Thick paint resists movement, so a flat or bright brush with firm bristles can push, spread, and leave ridges or visible texture on the surface. This makes A correct for an impasto-like effect. A soft liner is intended for delicate lines, a wet sponge changes the surface unpredictably, and a handle without bristles cannot carry or manipulate paint.

Correct answer: C. The paper surface may be damaged and the wash may become uneven

Explanation: The governing concept is controlled brush handling in a transparent wash. A stiff brush used with repeated pressure can disturb or lift the paper fibres, while excessive scrubbing redistributes pigment irregularly and breaks the even transparent layer. Therefore option C is correct. A soft brush, light pressure and fewer deliberate strokes protect the surface; options A, B and D do not describe the normal effect of abrasive brushing.

Correct answer: D. When the paint is still damp and a clean blotted brush is used

Explanation: Lifting is a brush technique in which some wet or damp pigment is removed from the painted surface. It works most effectively before the paint has fully dried, using a clean brush whose excess water has been blotted away. The brush absorbs or picks up pigment without adding much new water, so option D is correct. Hard-dry paint, a paint-loaded brush and torn paper do not provide controlled lifting.

Correct answer: A. Paper fibres may lift and the surface may be damaged

Explanation: The governing concept is gentle correction during colour lifting. Rubbing the same area repeatedly creates friction and weakens the paper’s upper surface; fibres can rise, become rough or detach, and later paint may spread unevenly there. Thus option A is correct. Transparency does not automatically improve, and rubbing cannot strengthen a handle or change the physical size of the painting, so B, C and D are distractors.

Correct answer: B. Creating visual variety, form and depth

Explanation: Stroke variation is a fundamental brush-technique principle. Thick marks can carry visual weight or indicate nearer, stronger forms, while thin marks can suggest detail, delicacy or distance. Balancing both creates rhythm, contrast, visual variety and a sense of form and depth, so option B is correct. The method does not change paper thickness, reduce cleaning needs or merely increase paint quantity; those choices confuse technique with material effects.

Correct answer: C. It can guide the viewer’s eye along a particular path

Explanation: In composition, directional lines and brush marks create visual movement. The eye tends to follow repeated or strongly oriented marks, so an artist can lead attention toward a focal figure, across a form or through the picture space. Therefore option C is correct. Direction does not rename a colour or physically shrink the paper, and saying it has no effect ignores its role in guiding attention and organizing the composition.

Correct answer: D. The eye may move away from the main figure

Explanation: The governing composition principle is directional emphasis. Lines or strokes that radiate outward from a focal area can carry the viewer’s eye away from that area, especially when their direction is stronger than the marks around the subject. Thus option D is correct. Outward strokes do not automatically focus attention, create a glow or disappear; to reinforce the figure, marks should generally support or lead toward the intended focal point.

Correct answer: A. Bristle stiffness, shape and paint-holding capacity also affect the result

Explanation: Brush selection depends on several interacting properties, not just the overall size. The tip shape controls the mark, stiffness affects pressure and texture, and paint-holding capacity influences how long a stroke can continue before reloading. These factors change precision, coverage and surface effect, so option A is correct. The other choices wrongly treat brushes as identical or unrelated to the painting’s needs.

Correct answer: C. By combining technical practice with purposeful choices of pressure, direction and speed

Explanation: Control comes from repeated technical practice: the artist learns to regulate pressure, angle, speed and paint load. Expression comes from deliberately varying those qualities to communicate energy, texture, emphasis or mood. Combining trained control with purposeful variation makes option C correct. Identical strokes can become rigid, speed alone cannot ensure quality, and working without observation removes intentional decision-making rather than improving expression.

Correct answer: B. A drying edge and uneven moisture

Explanation: In a flat wash, the governing principle is to maintain a connected, evenly moist edge. If one stroke begins drying and a fresh wet stroke is placed beside it, water movement can push pigment toward the boundary, producing a darker line or bloom. Therefore option B is correct. Paper size, handle weight and short bristles do not by themselves cause this edge-collection effect; uneven moisture and timing do.

Correct answer: C. Use the broad face and narrow edge separately

Explanation: A flat brush has different useful contact surfaces. Placing its broad face against the paper spreads the bristles and produces a wide band, while turning the brush so that only its narrow edge touches the surface produces a thin line. Hence option C is correct. Changing colour does not change the mark shape, cutting the brush damages it, and pressure alone cannot reliably replace the deliberate choice of brush face or edge.

Correct answer: B. Remove excess moisture from the surface

Explanation: The governing concept is moisture balance in wet-on-wet painting. Paint spreads according to the amount of water already present in the paper or ground. Removing excess moisture leaves the surface damp rather than flooded, so pigment travels more slowly and edges remain more controllable. Option B is correct; adding water or greatly diluting the colour increases spreading, while hard pressure can damage the surface.

Correct answer: C. Load separate colours on each edge with limited blending

Explanation: The governing concept is double loading. Place one colour on each edge or side of the flat brush, allowing only a small controlled transition where they meet. During one stroke, both pigments remain visible and create a two-colour mark. Therefore option C is correct. Complete mixing removes the distinction, dipping in water weakens control, and loading one edge cannot produce two clear colours.

Correct answer: D. Use small, soft, and less distinct strokes

Explanation: The governing concept is atmospheric perspective. Distance makes edges appear softer, contrast weaker, and small details less distinct because the atmosphere visually separates the viewer from the subject. Using restrained, small, soft strokes makes distant trees recede and supports spatial depth. Option D is correct; thick marks, very dark edges, and extra detail increase visual prominence and make trees seem nearer.

Correct answer: A. Small sharp light strokes beside controlled dark areas

Explanation: The governing concept is value contrast: a small bright highlight placed beside a controlled dark area creates a strong change in lightness, making a metal surface appear reflective and shiny. Option A is correct. Even grey removes contrast, blurred edges weaken the highlight, and identical texture gives no focused indication of reflected light.

Correct answer: B. Press the broad face first, then reduce pressure and turn onto the edge

Explanation: The governing concept is coordinated pressure and brush angle. Pressing the broad face first produces a wide beginning; gradually reducing pressure and turning the flat brush onto its edge narrows the contact area until the stroke becomes extremely thin. Option B is correct. Constant pressure keeps the width similar, excess water weakens control, and handle rotation alone does not create the required contact change.

Correct answer: C. Short broken horizontal strokes using the object's colours

Explanation: The governing concept is that calm water reflects nearby forms while its nearly horizontal surface creates gentle horizontal interruptions. Short, broken strokes in the reflected object's colours suggest both the image and small ripples, without making the reflection too solid. Long vertical strokes imply hanging forms, circular patches look accidental, and a black outline cannot show reflected colour or water movement. Therefore, option C is the most logical brushwork.

Correct answer: D. Apply pressure at the base and quickly lift upward

Explanation: The governing brush-control concept is tapering: pressure determines stroke width, while releasing pressure and lifting the brush narrows the mark. Begin with firm pressure at the base to create a broad grass blade, then move upward and flick the brush away quickly to form a pointed tip. Increasing pressure at the end or pressing throughout makes the tip blunt, and extra paint alone cannot create the required taper. Thus, option D is correct.

Correct answer: A. For making long continuous fine branches

Explanation: The governing concept is matching brush design to the required stroke. A rigger has unusually long, fine bristles that can hold a useful quantity of paint and release it in a continuous narrow line. This makes it especially suitable for extended branches, wires, stems, or similar details. A large sky needs a broad brush, thick square marks need a flat or wide brush, and dot printing does not use the rigger’s long-line advantage. Therefore, option A is correct.

Correct answer: B. The brush was not continuously loaded with enough mixture

Explanation: The governing concept in a wash is maintaining an even film of diluted colour and moisture across the working area. If a mop brush is not reloaded with enough prepared mixture, its moisture and pigment run out during the stroke, so the middle becomes pale or dry. Paper whiteness, the colour’s name, and handle length do not cause this specific interruption. Continuous loading and a well-mixed supply prevent it, making option B correct.

Correct answer: C. Curved strokes following the roundness of the vessel

Explanation: The governing concept is form-following brushwork: marks should support the direction and curvature of the object’s surface. Curved strokes that travel around the vessel help the viewer read its rounded body, changing planes, and volume. Uniform vertical lines, random dots, or a dark outline may describe decoration or contour, but they do not convincingly model the surface in three dimensions. Hence, option C is the most effective movement.

Correct answer: D. Blend only the boundary with a clean damp brush in a limited manner

Explanation: The governing concept of a soft edge is controlled transition: only the selected boundary should lose its sharpness, while the rest of the form retains its value, colour, and structure. A clean, slightly damp brush can soften that edge with a few limited passes. Adding water everywhere or rubbing continuously spreads pigment and destroys the form; washing the picture is excessive. Therefore, option D gives the correct correction.