Acrylic colour

Correct answer: C. Paint may dry and become thick or unusable

Explanation: The governing concept is evaporation and drying. When an acrylic tube or bottle remains open, water and other volatile moisture can escape into the air; the paint then becomes thicker and may eventually form a hard, unusable mass. Its name does not change, it does not mix by itself, and exposure does not make it reliably more transparent. Closing the container prevents avoidable drying.

Correct answer: D. To protect the surface from dust and minor damage

Explanation: The governing concept is surface protection through a final coating. After the acrylic painting has dried completely, varnish forms a protective film that helps shield the surface from dust, handling, and minor abrasion, while also providing a chosen finish. It does not re-wet the paint, erase the image, or make the canvas foldable. Thus option D states the main purpose.

Correct answer: A. To prevent trapped moisture and surface damage

Explanation: The governing concept is compatibility between a dry paint layer and a protective finish. If varnish is applied while acrylic is still wet or damp, moisture and soft paint may become trapped, causing cloudiness, unevenness, smearing, or poor adhesion. Waiting until the surface is completely dry allows the varnish to form a stable layer. It does not thin paint, renew a brush, or enlarge the canvas.

Correct answer: B. Less glossy

Explanation: The governing concept is the difference between matte and glossy surface finishes. Matte varnish scatters incoming light rather than reflecting it strongly in one direction, so the painting generally appears subdued and less shiny. It does not normally create a mirror-like or metallic surface, and the transparent-paper comparison is not the intended finish. Therefore option B is correct.

Correct answer: C. Surface shine and colour depth increase

Explanation: The governing concept is light reflection from a glossy final layer. Gloss varnish reflects more light, giving the surface a brighter, shinier appearance; it can also make colours appear richer or deeper by increasing visual saturation and contrast. It does not turn the painting white, remove the colours, or soften the canvas. Thus option C correctly describes the general effect.

Correct answer: D. To prevent dust and dirt from sticking to wet paint

Explanation: The governing concept is protecting a wet paint surface from contamination. Acrylic paint can remain tacky or wet long enough to catch airborne dust, fibres, and other particles. A clean workspace, palette, and tools reduce these unwanted marks and help produce a smoother finish. Cleanliness does not change paint price, canvas weight, or canvas size, so option D is the only relevant reason.

Correct answer: A. Paint is an art material and is not safe to mix with food

Explanation: The governing concept is hygiene and safe separation of art materials from food equipment. Acrylic colour is intended for artwork, not for contact with food or utensils used for eating. Keeping it separate prevents accidental contamination and protects health, even when the material appears dry or harmless. The paint does not heat food, make utensils dry it, or increase in size; therefore option A is correct.

Correct answer: B. Protective glasses and an apron

Explanation: The governing concept is safe handling of art materials. During splattering, tiny paint droplets can travel toward the face and settle on clothing, so protective glasses shield the eyes and an apron protects clothes. Folding paper, breaking a brush, or wetting the canvas does not provide personal protection. Therefore, option B is the complete and appropriate safety measure for this technique.

Correct answer: C. To create clean straight edges or protected areas

Explanation: The governing concept is masking or reserving an area during painting. Masking tape covers selected sections so acrylic paint cannot enter them, producing a sharp, clean boundary when the tape is removed. It does not thicken paint, clean a brush, or dry colour. Thus option C correctly identifies its purpose in acrylic painting.

Correct answer: D. Remove the tape slowly at a low angle

Explanation: The governing concept is protecting the painted surface while removing a mask. Pulling tape slowly at a low angle reduces the upward force placed on the paper, canvas, or dried paint film, so the surface is less likely to lift. Forceful straight pulling increases damage risk, while water or rubbing is not the proper method. Option D is correct.

Correct answer: A. Use light and dark colour values

Explanation: The governing concept is value, meaning the relative lightness or darkness of a colour. Light areas receive more illumination, while shadow areas use darker values, creating contrast that suggests form and volume. A single flat colour or outlines alone cannot show convincing light direction, and sprinkling water is unrelated. Therefore, option A is correct.

Correct answer: B. Decide the composition, colour palette and light source

Explanation: The governing concept is preparation before execution. Deciding the composition, colour palette, and light source establishes the arrangement, colour harmony, and lighting logic before paint is applied. A small preliminary sketch can further reduce mistakes. Squeezing out colours without a plan, folding the canvas, or choosing only varnish does not guide the painting. Hence option B is correct.

Correct answer: A. Decide the required colours first

Explanation: The governing concept is efficient colour preparation for a fast-drying medium. Acrylic can lose workable moisture quickly, so deciding the required colours first allows the artist to mix promptly and in a controlled order. Leaving paint uncovered increases waste; a dry brush and repeated washing do not solve the planning problem. Therefore, option A is the most useful plan.

Correct answer: B. Take small amounts and add fresh paint as needed

Explanation: The governing concept is controlling acrylic paint exposure and waste. Because moisture evaporates quickly, placing small amounts on the palette and adding fresh paint only when needed keeps more paint workable. Sunlight and a heated palette increase drying, while sand changes the texture and is not a normal remedy. Thus option B is the suitable practical choice.

Correct answer: C. Clean the brush with water immediately

Explanation: The governing concept is immediate brush care for a water-based medium. While acrylic paint is still wet or only beginning to dry, rinsing the brush in clean water helps remove pigment before it hardens between the bristles. Adding paint, wrapping the brush, or placing it in sunlight will not clean it and may worsen the problem. Therefore, option C is correct.

Correct answer: D. The two paint layers may mix unintentionally

Explanation: The governing concept is controlled layering. If the first acrylic layer remains wet, the brush or new paint can disturb, lift, and blend the underlying colour. This may produce muddy or unintended mixtures instead of two clear layers. Paper thickness does not automatically increase, brightness is not guaranteed, and a brush cannot clean itself. Thus option D is correct.

Correct answer: A. The colour remains clean and controlled

Explanation: The governing concept is stable, controlled layering. Once an acrylic layer is dry, a new layer can be placed over it with much less unwanted mixing or lifting, so edges and colour relationships remain clearer. The paper does not become transparent, the lower layer does not always disappear, and acrylic is intended to adhere. Therefore, option A is correct.

Correct answer: B. Prepare enough mixture beforehand

Explanation: The governing concept is consistency of paint mixture. Preparing enough acrylic colour in one batch keeps the pigment, binder, and dilution ratio nearly the same throughout the large area, so the dried surface has a more uniform colour. Option B is correct. Making separate mixtures can create shade differences, while changing water or applying unmixed paint does not control colour consistency. A covered palette can also slow drying while the area is painted.

Correct answer: C. Even pressure and controlled strokes

Explanation: A flat acrylic layer depends on an even paint load and controlled brush movement. Applying consistent pressure with deliberate, overlapping strokes spreads the colour smoothly and prevents ridges or gaps from becoming prominent. Option C is correct. Very thick paint can leave raised marks, changing directions randomly can make the surface uneven, and scratching a dry layer damages rather than smooths it. Working at a steady pace also helps prevent premature drying between strokes.

Correct answer: D. The paint load and applied brush pressure are uneven

Explanation: Visible streaks usually result from uneven paint distribution. If the brush carries different amounts of acrylic colour or is pressed harder in some places, one part receives a thicker or darker film than another, producing bands. Option D is correct. A white ground may affect apparent transparency, but it does not normally create brush streaks; a printed shade name and a clean brush are not causes. Consistent loading and pressure reduce the problem.

Correct answer: A. Covering power and adhesion to the surface may decrease

Explanation: Acrylic paint contains a binder that holds pigment together and helps the dried film adhere to the surface. Excessive water dilutes this binder along with the pigment, so the mixture may cover less effectively and form a weaker film with poorer adhesion. Option A is correct. Water normally makes paint thinner, not thicker, and it does not instantly harden the colour or turn paper metallic. Small, controlled dilution is safer than flooding the mixture.

Correct answer: B. Add a little water or a suitable acrylic medium

Explanation: The governing principle is adjusting paint consistency without unnecessarily changing its colour. If acrylic paint is too thick to spread, a small amount of water or a compatible acrylic medium can improve flow and make brushing easier. Option B is correct. Black changes the colour value but does not solve the consistency problem; drying makes spreading impossible, and cutting bristles damages the tool. Add liquid gradually because excessive water can weaken opacity and adhesion.

Correct answer: D. The colour may look heavy and lifeless

Explanation: Black absorbs much of the light and strongly lowers the value and perceived brightness of a colour. When too much black is mixed into acrylic paint, the original hue can lose its clarity and appear dull, heavy, or lifeless. Option D is correct. Black does not make the mixture lighter or brighter, and it does not automatically make the colour transparent. For controlled darkening, add a very small amount at a time and compare the mixture with the original.

Correct answer: B. A tiny amount of red

Explanation: Green and red are complementary colours. Adding a tiny amount of red reduces the saturation of an excessively vivid green, making it more subdued and closer to many natural greens. Option B is correct. The quantity must remain small because too much red can push the mixture toward brown. More yellow shifts the green toward yellow-green, white makes a lighter tint, and water changes flow or transparency rather than neutralising vividness.

Correct answer: C. Orange

Explanation: On the traditional colour wheel, orange is complementary to blue. Adding a very small amount of orange reduces the saturation or intensity of blue because the opposing hues partially neutralise each other. Option C is correct. White lightens blue and creates a tint, yellow shifts it toward green, and green does not provide the direct complementary contrast needed for controlled muting. Too much orange, however, can make the mixture dull or brownish.