Acrylic colour

Correct answer: C. Create one or more measured intermediate values and apply them in dry layers

Explanation: The governing concept is a controlled value gradation. Instead of allowing wet paint to run unpredictably, prepare one or more intermediate values between the light and dark areas, then apply them in deliberate dry layers. Option C is correct because each measured step narrows the value difference and creates a reproducible transition. Excess water is uncontrolled, while a black outline hides rather than blends the boundary.

Correct answer: A. Mix a very small amount of green into red

Explanation: Red and green are complementary colours, so a very small amount of green reduces the intensity of red and can create a deeper, more natural muted red. Option A is correct, provided the green is added gradually; too much would make the mixture brown or muddy. White would create a lighter tint, yellow would shift red toward orange, and water would mainly thin the paint rather than deepen its hue.

Correct answer: B. Adhesion may become weaker

Explanation: The governing concept is the balance between dilution and the acrylic binder. A small amount of water can adjust flow, but excessive water may dilute the binder too much, leaving a weak, uneven or poorly adhering film after drying. Therefore option B is correct. Acrylic paint cannot turn into oil, and water will not make a surface metallic; excessive dilution does not strengthen the layer. Use water carefully or choose a suitable acrylic medium for controlled thinning.

Correct answer: A. Drying an excessively thick layer unevenly

Explanation: The governing concept is controlled drying and film formation. In an excessively thick acrylic layer, the surface may dry and contract at a different rate from the material underneath. That internal stress can produce cracks, especially when drying is uneven, so option A is correct. A light pencil drawing, a clean palette and a soft brush do not normally create cracking in the dried paint film. Applying moderate coats helps reduce this risk.

Correct answer: A. Unequal ratios of water and medium in different areas

Explanation: Acrylic sheen depends partly on the amount and type of binder or medium left in the dried film. If different areas receive inconsistent amounts of water or medium, one section may dry more matte while another appears glossier, creating uneven sheen. Therefore option A is correct. Using the same clean brush, working on a clean surface, or keeping the painting upright does not by itself cause this variation; consistent mixing and a final compatible varnish can help.

Correct answer: A. Medium contains binder while water mainly thins the paint

Explanation: Acrylic medium contains acrylic binder and is designed to modify properties such as transparency, flow, gloss, or thickness while preserving the paint film. Water mainly lowers viscosity and spreads the paint; too much can reduce the binder concentration and weaken the result. Thus option A is correct. Medium is not merely a brush cleaner, and it is not identical to water.

Correct answer: A. Reflections surrounding colours and edges

Explanation: Glass is understood through what it reflects, transmits and distorts from its surroundings. Instead of filling it with one flat colour, the artist observes reflected lights, nearby colours, interior overlaps and changing edge sharpness. Option A is correct because these observations create the illusion of transparent glass. A black outline alone makes the object look symbolic, one uniform colour removes transparency, and canvas thickness has no role in depicting the object’s optical appearance.

Correct answer: A. A balance of subtle warm and cool colours

Explanation: Natural skin is affected by light direction, reflected surroundings, blood warmth and cool shifts in shadow, so it is not a single flat orange mixture. Subtle warm and cool variations, adjusted in value and saturation, create a convincing surface. Option A is correct. A uniform orange looks artificial, pure black can make shadows harsh and dirty, and limiting the palette to only white and red removes useful temperature and value variation.

Correct answer: A. Add a small amount of a suitable complementary or related dark colour

Explanation: The governing concept is controlled colour mixing. To deepen a hue without immediately making it dull, an artist can add a small quantity of a related dark colour or a carefully chosen complementary colour, testing the mixture gradually. Option A is correct because it preserves more chromatic character when used judiciously. Excess black often weakens colour vitality, while chalk and washing do not provide a reliable rich shadow.

Correct answer: A. High contrast, sharp edges and greater detail

Explanation: The governing design principle is emphasis: the eye is drawn toward differences in value, edge sharpness, colour intensity and detail. Option A combines several such signals, so it is most effective when concentrated around the intended focal area. Option B tends to recede, C removes hierarchy, and a bright background alone may compete with or distract from the subject instead of directing attention to it.

Correct answer: A. To allow internal moisture and the layer to stabilize fully

Explanation: The governing conservation concept is complete curing, not merely a dry-looking surface. A thick acrylic application can form a skin while moisture and the binder beneath continue to stabilize. Waiting reduces the risk of clouding, tackiness, pressure marks or other varnish problems. Option A is correct; the other choices describe impossible or irrelevant effects and do not explain the need for a curing period.

Correct answer: A. To create a protective layer between the painting and removable varnish

Explanation: The governing conservation concept is separation and future reversibility. An isolation coat forms a clear protective barrier over the cured acrylic, so a removable varnish can later be cleaned or replaced with less direct contact with the original paint layer. Option A is correct. It is not an instant-drying agent, a texturing step or a treatment that turns colours white.

Correct answer: C. Excess water reduces the concentration of binder and pigment

Explanation: The governing concept is acrylic adhesion: acrylic paint needs enough polymer binder to hold pigment particles together and attach the dried film to the surface. Excess water dilutes both binder and pigment, so the layer may lose covering power, become chalky or fragile, and adhere poorly. Therefore option C is correct. The other choices describe impossible effects; water does not turn paint into metal, make paper reject it, or allow a brush to cut a dry film.

Correct answer: D. The surface is overly smooth or greasy

Explanation: The governing concept is surface preparation and adhesion. A new acrylic layer must grip the underlying film; grease, wax, dust, or an excessively slick surface prevents proper contact, so the fresh paint beads, slides, or lifts instead of settling. Option D identifies the most likely cause. A light lower layer, pure colour, or pointed brush does not normally prevent adhesion. Cleaning and suitably preparing the surface improves the bond.

Correct answer: A. Repeating the same ratio later may be difficult

Explanation: The governing concept is colour consistency. If a large area is painted in separate batches, even a small change in the ratio of acrylic pigments, white, or medium can produce a slightly different hue, value, or saturation. Preparing enough mixture at the beginning gives the whole shape a more uniform appearance. Thus option A is correct. Colour names and paper size do not change for this reason, and a brush does not automatically dry because the mixture is insufficient.

Correct answer: B. Apply a uniform new layer over the entire related shape

Explanation: The governing painting principle is visual uniformity. A small repair patch often leaves a visible boundary because its colour, opacity, or brush texture differs from the surrounding area. Applying one controlled, uniform acrylic layer across the complete related shape makes the surface and colour consistent, so option B is the best solution. Black would create a stronger mark, water will not correct a dried colour difference, and folding the paper is irrelevant.

Correct answer: C. The colour may become muddy and the surface uneven

Explanation: The governing concept is controlled brushwork in a fast-drying medium. Repeated strokes disturb the wet film, mix neighbouring colours unintentionally, lift partially setting paint, and leave visible brush marks or an uneven surface. Consequently, option C is correct: the colour can become muddy and the surface irregular. More brushing does not purify colour or automatically level it, and it cannot increase the thickness of the paper.

Correct answer: D. Hard boundaries may form between the colours

Explanation: The governing concept of a soft gradation is a gradual transition while adjacent paint remains workable. When the edges dry too quickly, the new colour cannot merge smoothly with the previous one, leaving a sharp edge or band between values. Therefore option D is correct. Fast drying does not automatically lighten every colour or make paint transparent, and it has no effect that strengthens the paper. Working in smaller areas and blending promptly helps.

Correct answer: A. Add a tiny amount of blue

Explanation: Blue is the complementary colour of orange on the colour wheel. Adding only a tiny amount gradually lowers orange’s intensity or saturation and produces a more muted, neutral mixture. The quantity must be controlled because too much blue can make the mixture muddy or shift it toward brown. More yellow or red usually makes the orange warmer, while water mainly thins acrylic and increases transparency rather than neutralising its colour.

Correct answer: B. Add a little violet or dark orange

Explanation: The governing idea is controlled colour mixing: black is a strong, neutralising pigment and can make yellow appear dirty, greenish, or muddy because of the pigments contained in the mixture. A very small amount of violet, or a suitable warm dark orange, can reduce the unwanted green cast while preserving a more intentional yellow-brown or muted yellow. More black worsens the muddiness; white only lightens, and water only dilutes.

Correct answer: C. Excess white reduces the colour’s saturation, making it pale and opaque

Explanation: In acrylic painting, white pigment creates a tint by increasing lightness, but an excessive amount also reduces the original hue’s saturation and visual richness. Because white acrylic is relatively opaque, it covers the stronger colour and can make the mixture appear pale, dull, and chalky. The paper does not suddenly stop absorbing paint, and a brush does not remove pigment. Adding white gradually preserves more colour strength.

Correct answer: D. Add pure paint of the same hue

Explanation: The relevant concepts are value and saturation. Value describes how light or dark a colour is, while saturation describes its intensity or purity. Since the mixture already has the correct value, adding grey or black would usually make it duller or darker and disturb that value. Increasing a complementary colour can neutralise the mixture. A small amount of pure paint with the same hue raises saturation while changing lightness less, so option D is the best correction.

Correct answer: A. Relatively cool

Explanation: Colour temperature is understood relationally: when the main light is warm, shadows may be painted relatively cooler to create a readable warm-light and cool-shadow relationship. This does not mean every shadow must be blue or that the rule is absolute; the surrounding colours and reflected light must still be observed. Option A is correct because relative coolness provides contrast. Yellow alone and pure white are not shadow temperatures, while extra warmth can weaken the visual separation.

Correct answer: B. The temperature contrast between light and shadow becomes clear

Explanation: The governing concept is colour-temperature contrast. In a scene illuminated by cool light, relatively warm shadows create a deliberate contrast between the cool lit areas and warmer darker areas. This variation can make the painting feel more lively and can separate forms without relying only on black-and-white value contrast. It does not change the paper, brush loading, or automatically make the paint opaque. Therefore, option B accurately describes the artistic benefit.

Correct answer: C. The volume appears harsh and unnatural

Explanation: A midtone is the transitional value between the light side and the darker shadow side. On a round object, this gradual progression helps the viewer read the curved surface and three-dimensional volume. If the midtone is omitted, the change becomes abrupt, so the form may appear harsh, flat, or unnatural rather than smoothly rounded. The omission does not make the object transparent, brighten the colour automatically, or strengthen the paper. Thus, option C is correct.