Acrylic colour

Correct answer: A. Thin pointed brush

The governing concept is brush control: a thin pointed brush has a narrow, flexible tip that can hold a small amount of paint and release it in a controlled line. Therefore, option A is correct for outlines and fine details. A broad flat brush is designed for washes and wide strokes, a fan brush makes textured strokes, and a sponge produces dabs rather than precise lines.

Correct answer: A. It dries quickly

Acrylic colour is a water-based painting medium that generally dries relatively quickly, forming a durable film after the water evaporates. This quick drying allows layering but gives the artist less time for wet blending, so colours may need to be mixed promptly. Option A is correct. Acrylic does not remain permanently wet, is not restricted to metal, and its wet form can be thinned with water.

Correct answer: B. Water

Wet acrylic colour is water-based, so a small amount of clean water can be added to reduce its thickness and improve flow. Option B is correct. However, excessive water may weaken the binder concentration and reduce adhesion or coverage, especially on a surface that is not absorbent. Oil, sand and wax do not serve as the normal thinning agents for wet acrylic paint and would interfere with its intended handling.

Correct answer: C. Brush

A brush is the standard and most versatile tool for applying acrylic colour. Its bristles allow the artist to spread paint evenly, control the thickness of a stroke, make outlines, and add fine details. A palette knife and sponge can create special textures, while a roller is more useful for broad, relatively even surfaces. Therefore, option C is correct for ordinary acrylic painting.

Correct answer: D. Palette

A palette is designed to hold separate amounts of paint and provide a clean surface on which colours can be mixed. The artist can combine small quantities, compare the resulting shade, and adjust the mixture before applying it to the artwork. A cloth is mainly for wiping, a needle is not a mixing tool, and a stone is not the usual classroom painting surface. Thus, option D is correct.

Correct answer: A. It does not dissolve easily in water

Acrylic paint is water-based while wet, but its binder forms a durable film as the water evaporates. After drying, the paint generally becomes water-resistant and does not dissolve easily in water. It does not normally keep flowing, disappear, or cut the paper. This property also explains why brushes should be cleaned promptly before the paint hardens. Therefore, option A is correct.

Correct answer: B. Paint may dry on the brush and harden the bristles

Acrylic paint remains water-mixable when wet, but it dries quickly into a firm film. If it is left on the brush, the paint can bind the bristles together, make them stiff, and permanently reduce the brush’s usefulness. Rinsing the brush during work and immediately afterward prevents this buildup. Washing does not make a brush heavy, keep paper wet, or brighten the paint, so option B is correct.

Correct answer: C. Canvas or thick paper made for acrylics

Canvas and heavyweight paper made for acrylics are stable surfaces that can support paint layers without easily tearing or buckling. They also absorb moisture more safely than very thin paper. A wet cloth is unstable, tissue paper tears and wrinkles readily, and loose newspaper can buckle or become damaged by paint. Consequently, option C is the most suitable choice for normal acrylic artwork.

Correct answer: A. White colour

The governing concept is colour value: adding white to an acrylic colour raises its value and produces a lighter version called a tint. Therefore, option A is correct. Black lowers the value and creates a darker shade, while sand is a textural material and oil is not the usual additive for lightening water-based acrylic paint. Mix white gradually so the original hue remains visible and the desired lightness can be controlled.

Correct answer: B. Black

The governing concept is adjustment of colour value. A small amount of black lowers the value of an acrylic colour and makes it darker, so option B is correct. Black is a strong pigment; too much can overpower the original hue and make the mixture dull or nearly black. White produces a tint, while yellow or blue may change the hue rather than simply darken it. Add black gradually and mix thoroughly.

Correct answer: C. Tint

In colour theory, a tint is made by adding white to a base colour, increasing its lightness while retaining the basic hue. Thus, option C is correct. A shade is normally produced by adding black, and a line or texture describes a visual mark or surface quality rather than a lighter colour mixture. For example, red mixed with white becomes a lighter red tint. The amount of white controls the final value.

Correct answer: D. Shade

The governing colour-theory concept is value modification. Adding black to a base colour creates a darker version called a shade, so option D is correct. A tint is made by adding white, while a tone is commonly made by adding grey or a neutral colour. A wash refers to a thin, diluted application of paint, not specifically a darkened colour mixture. The quantity of black determines how strongly the original colour is darkened.

Correct answer: A. Raised texture

The governing technique is impasto-like application: a thick layer of acrylic paint can dry with visible volume, brush marks, or palette-knife marks, creating a raised texture. Therefore, option A is correct. A transparent wash is normally produced with a thin, diluted layer, while a thick layer is neither automatically flat nor colourless. The actual height depends on the paint quantity and application method, but thickness generally increases surface texture.

Correct answer: B. Add a limited amount of water

To create a thin acrylic layer, a small or controlled amount of water can be mixed into the paint, making it less viscous and easier to spread. Therefore, option B is correct. Water should be used carefully because excessive dilution can weaken the paint film and reduce adhesion, especially on an unsuitable surface. Sand adds texture, drying the brush does not thin paint, and cutting paper is unrelated. The required amount depends on the desired transparency and flow.

Correct answer: D. Allow the first layer to dry completely

The governing layering principle is to apply a new acrylic layer over a stable, dry surface. The first layer should therefore be allowed to dry completely, making option D correct. A dry base prevents the new colour from disturbing or mixing unpredictably with the layer below and helps preserve a clean edge. Spraying water or rubbing a wet layer can lift and smear paint, while varnish is a finishing material rather than a normal step between paint layers.

Correct answer: A. The lower colour can be covered easily

Acrylic paint becomes a stable film when dry, so an opaque new colour can be placed over it to cover, correct, or modify the underlying area. Thus, option A is correct. The benefit is not that paper tears or the brush cleans itself; those statements are unrelated. Paint can adhere to a suitable dry surface, so option D is also false. The coverage depends on the new paint’s opacity and the number of layers applied.

Correct answer: B. Masking tape

The governing technique is masking: masking tape is placed along a planned boundary to block paint from crossing it. After the surrounding acrylic colour is applied and suitably dry, removing the tape reveals a clean, sharp edge, so option B is correct. A wet cloth may wipe paint but cannot reliably define a straight boundary; a scissor edge is unsafe and unsuitable, while sand adds texture rather than a controlled edge. Good adhesion and careful removal improve the result.

Correct answer: C. Add white to the base colour

The governing concept is value modelling: a highlight is a lighter area that receives or represents stronger light. Mixing white with the base colour raises its value and creates a controlled highlight, especially when the light source is kept consistent across the object. Black would create a darker value, erasing removes the painted form, and sand changes texture rather than producing ordinary light. Therefore, option C is correct.

Correct answer: D. A darker value of the base colour

The governing concept is value contrast between light and shade. A shadow is represented by a darker value of the object’s base colour, adjusted to suit the light direction and surrounding colours. This darker value gives the form depth and helps the viewer read its volume. A lighter value and thick white paint suggest light, while adding only water mainly thins acrylic paint rather than creating a reliable shadow. Thus, option D is correct.

Correct answer: C. It creates unity in the painting

The governing concept is colour harmony and unity. Using a limited palette means selecting a small, related group of colours and repeating them through the composition. This controls visual variety, connects separate areas, and makes the painting feel organised and harmonious. It does not stop acrylic paint from drying, make paper transparent, or automatically create disorder. Therefore, option C is correct because unity is the main compositional benefit.

Correct answer: C. Add a little water

The governing concept is paint consistency. If acrylic colour is too thick to move smoothly, a small amount of water can reduce its viscosity and improve brush flow. Water should be added gradually and mixed well, because excessive dilution can reduce opacity and weaken the paint layer. Black paint, sunlight, and tearing the paper do not correct thickness. Thus option C is correct.

Correct answer: D. The covering power may decrease

The governing concept is controlled dilution of paint. Acrylic colour contains pigment and binder; adding excessive water makes the mixture too thin and can reduce opacity and covering power. The surface may show through, requiring more coats. It does not always become darker, metallic, or instantly set. Therefore option D correctly describes the likely effect of over-dilution.

Correct answer: A. Use a wet palette or palette paper placed over a damp sponge

The governing conservation principle is limiting evaporation. A wet palette, or palette paper supported by a damp sponge, maintains a moist environment and keeps acrylic colour workable for a longer period. Direct sunlight and moving air increase water loss, while dry sand contaminates the paint and does not preserve it. Hence option A is the suitable practical method.

Correct answer: B. To prevent the paint from drying

The governing storage concept is protection from air exposure. Acrylic paint contains water and begins to lose moisture when the container is left open. Closing the lid slows evaporation, keeps the paint usable, and reduces the formation of a dry skin. It does not darken the colour, rename it, or clean a brush. Therefore option B is the correct storage practice.

Correct answer: C. Remove it carefully and clean the rim

The governing maintenance principle is keeping the container seal clean. Dried paint on the rim can prevent the lid from closing tightly, allowing air to enter and causing more paint to dry. It should be removed carefully and the rim wiped clean. Mixing flakes into wet paint may create lumps, and forcing the lid can damage the container. Option C is correct.