Pencil shading

Correct answer: B. Keeping it slightly lighter than shadow but darker than the lit area

Explanation: The governing concept is value hierarchy in form shading. Reflected light bounces into the shadow side and raises its value slightly, but it remains weaker than the directly lit planes. Keeping it within the shadow family means it should be lighter than the deepest shadow while still darker than the light family. Therefore, option B is correct. Making it brighter than direct light or leaving it white breaks the form, while reflected light is not the same as cast shadow.

Correct answer: C. Gradually changing

Explanation: The governing concept is gradual value transition. Soft, diffused light spreads across a curved surface, so the highlight changes progressively through light, middle, and darker tones before reaching the core shadow. Therefore, option C is correct. Options A, B, and D incorrectly suggest a hard edge or no middle values, which would be more typical of sharply directed light.

Correct answer: B. The surface turning and three-dimensional volume

Explanation: A gradual value progression models how light falls across a curved surface. The lighter area suggests the plane facing the light, while progressively darker tones indicate the turning surface and shadow side. This smooth transition makes the fruit appear rounded, solid, and three-dimensional rather than flat. Therefore, option B is correct.

Correct answer: C. Unnaturally shiny

Explanation: A highlight is the small or controlled area where reflected light is strongest. On a round object its size and shape should correspond to the light source, surface material, and curvature. If the highlight is made excessively large, too much of the surface appears strongly reflective, so the object may look unnaturally shiny. It does not directly make the object rougher, heavier, or farther away.

Correct answer: A. To practise the gradation and control of values from light to dark

Explanation: The governing concept is the value scale, which arranges a controlled sequence from the lightest mark to the darkest mark. Making it develops control of pencil pressure, graphite density, tonal steps, and transitions needed to show light and form. Thus, option A is correct. A value scale is not merely an outline exercise, does not change the paper texture, and cannot enlarge the drawn object.

Correct answer: B. Broken and abrupt

Explanation: The governing concept is gradual value transition. A convincing gradation normally includes intermediate tones between the lightest and darkest areas. If the drawing jumps directly from light to very dark, the eye notices a sharp boundary, so the result appears broken and abrupt; option B is correct. It is not natural or transparent, and a completely even tone would contain no light-to-dark change at all.

Correct answer: C. It keeps the value controlled and correctable

Explanation: The governing concept is gradual value control. Several light layers increase darkness step by step, so the artist can compare the tone with the object, preserve the paper texture, and stop or adjust before the area becomes too dark. Heavy pressure applied once may flatten the tooth of the paper and is difficult to erase cleanly. Therefore, option C is correct; the other choices do not describe the result of layering.

Correct answer: D. The shading will appear patchy and uneven

Explanation: The governing concept is consistency of pressure during tonal rendering. If pressure changes unpredictably, some strokes deposit more graphite and become dark while nearby strokes remain light. This breaks the gradual value transition and makes the surface look patchy or uneven. Option D is correct. Uneven pressure does not strengthen paper, guarantee a correct shadow, or necessarily create shine; steady pressure produces a smoother tone.

Correct answer: A. Roundness and volume become clearer

Explanation: The governing concept is form-following or contour-based shading. On a rounded object, strokes that follow the surface curvature guide the viewer’s eye around its form and reinforce the direction of its volume. This makes the object appear more solid and three-dimensional, so option A is correct. Such strokes do not change paper size, automatically remove the highlight, or make the pencil tip thicker.

Correct answer: B. Each plane faces the light differently

Explanation: The governing concept is light-and-shade modeling. The three planes of a cube face different directions, so a single light source illuminates them by different amounts. The plane facing the light is usually lighter, the turned plane is darker, and another plane may show a middle value. Thus option B is correct. Different materials, sizes, or pencils are not the necessary reason for the value difference.

Correct answer: C. Curvature and three-dimensional volume

Explanation: The governing concept is gradual value modeling on a curved form. A cylinder needs a controlled transition from light through middle value to dark so the surface appears to turn around its axis. If every area has equal darkness, that transition disappears, and the cylinder may look flat or like a rectangular shape. Therefore option C is correct; height, ellipse, and contour alone cannot communicate the lost volume.

Correct answer: D. The light will appear overly spread and the form may weaken

Explanation: The governing concept is the relationship between highlight size and the apparent light source and surface curvature. A highlight that is too large spreads the light area beyond what observation supports, reducing the contrast that helps describe the sphere’s round form. Thus option D is correct. It does not directly make the sphere rougher or heavier, and highlight size alone does not determine the length of the cast shadow.

Correct answer: A. The darkest form-shadow area on the object's surface, away from direct light

Explanation: The governing concept is the separation of form shadow, cast shadow, highlight, and reflected light. The core shadow is the darkest portion of the form shadow on the object itself, generally positioned away from direct light. Therefore option A is correct. Option B is a cast shadow outside the object, C is the lit area, and D describes reflected light near the shadow rather than the core shadow itself.

Correct answer: D. Opposite the light

Explanation: The governing concept is the direction of light projection. When light travels from a source toward an object, the object blocks that light and produces a cast shadow on the opposite side. Therefore option D is correct. The exact shape and length also depend on the source’s height, angle, and distance, but the general direction is away from the light. A, B, and C ignore this basic relationship.

Correct answer: A. Harder and clearer

Explanation: The governing concept is edge quality in cast shadows. Close to the object, the blocked light often produces a relatively narrow transition, so the shadow edge may appear harder and clearer. As the shadow travels farther across the surface, light can soften the transition, making the edge less definite. Thus option A is correct. It is not always completely lost, white, or boundary-free; the appearance depends on the light and distance.

Correct answer: B. By a sudden value change

Explanation: The governing concept is edge control through value transition. A hard edge appears where one value changes abruptly into another, creating a clear boundary between light and dark. Therefore option B is correct. A gradual transition produces a soft edge, while an eraser may modify an edge but does not define the principle by itself. A single light line also cannot automatically create a hard tonal boundary.

Correct answer: C. Creating a gradual transition between two values

Explanation: The governing concept is edge quality in tonal drawing. A soft edge is produced when one value changes gradually into another, moving smoothly from light to dark without a sudden boundary. Therefore, option C is correct. A thick contour creates a hard edge, erasing the surface removes information, and heavy pressure may make a dark mark but cannot by itself create a controlled transition. Soft edges are useful on rounded forms and slowly changing shadows.

Correct answer: D. Cut out and flat

Explanation: The governing concept is variation of edge quality. In a convincing drawing, some edges are sharp while others are soft or partially lost, depending on the form, light, and distance. If every edge is equally hard, each boundary receives the same emphasis, so the objects can look like flat cut-outs instead of having rounded volume and depth. Thus option D is correct. Equal hardness does not make a drawing transparent, naturally balanced, or more realistic.

Correct answer: A. Placing lines closer together

Explanation: The governing concept in hatching is value control through line density. When parallel strokes are placed closer together, more graphite marks cover the area and less paper remains visible, so the eye reads the region as darker. Therefore, option A is correct. Erasing removes tone, one line cannot cover enough area to form a broad dark value, and widely spaced lines leave more white paper and usually create a lighter value.

Correct answer: B. Adding light layers in different directions

Explanation: The governing concept is gradual value building through controlled layers. In cross-hatching, light strokes are placed in one direction and then additional light layers are added in other directions. Each layer increases the graphite coverage, allowing the artist to stop at the desired value and preserve the paper surface. Option B is correct. Heavy pressure on one line creates an abrupt mark, rubbing can damage texture, and thickening only the contour does not shade the interior form.

Correct answer: C. The surface direction, curvature, and volume become clear

Explanation: The governing concept is form hatching, in which strokes follow the direction or curvature of the object. Because the lines bend with the surface, they guide the viewer around the form and strengthen the impression of three-dimensional volume. Option C is correct. Texture may be suggested, but texture alone is only a partial benefit; form hatching does not remove the cast shadow or make the paper whiter. Curved strokes on a rounded object are more informative than unrelated straight lines.

Correct answer: A. The value will become dark too quickly and be difficult to correct

Explanation: The governing concept is gradual control of graphite pressure. Cross-hatching works best when light layers are built progressively, because the artist can adjust darkness and preserve the tooth of the paper. If every layer is pressed heavily, the value becomes dark too soon, grooves may form, and lifting or correcting the tone becomes difficult. Option A is correct. Pressure does not automatically change spacing, smooth the paper, or erase earlier marks.

Correct answer: A. By using a medium density of dots

Explanation: The governing concept in stippling is that value depends mainly on the density of separate dots. A medium value is made by placing dots at a moderate density, so the area contains a balanced amount of ink or graphite and visible paper. Option A is correct. Very dense dots produce a dark value, widely spaced dots produce a light value, and long dark lines belong to line shading rather than stippling.

Correct answer: B. The surface will look uncontrolled and patchy

Explanation: The governing concept is consistency of marks in stippling. A controlled stippled tone normally uses dots of reasonably similar size while changing darkness mainly through their spacing and density. If dot sizes vary greatly, isolated large marks compete with tiny marks and the surface becomes irregular, patchy, and difficult to control. Therefore, option B is correct. Uneven dots do not automatically smooth the tone, correct volume, or reveal the direction of light.

Correct answer: C. Because pressure and stroke density are uneven

Explanation: The governing concept is even distribution of tone. Circular-stroke shading becomes patchy when the artist presses harder in some areas or places more overlapping strokes there than elsewhere. Those differences create uneven graphite density, so the eye sees separate dark and light patches. Option C is correct. White paper and a light contour are not causes of uneven fill, and a sharp point may affect line character but does not by itself create patches when pressure and density are controlled.