Primary colours

Correct answer: A. Red, Green, Blue

Explanation: The RGB model is an additive model used for emitted light, such as displays and projectors. Its three primary channels are red, green and blue; combining their intensities can create many other colours, including white at full equal intensity. Red-yellow-blue is a traditional art model, while cyan-magenta-yellow belongs to subtractive colour systems. Therefore, option A is correct.

Correct answer: A. It gives a simple understanding of making secondary colours with pigments

Explanation: The governing concept is the RYB pigment model used in traditional painting. Red, yellow, and blue are taught as basic paint colours because combining suitable pairs gives the secondary colours orange, green, and violet. Thus, the model helps learners understand the colour wheel and practical pigment mixing. It is not a digital-screen model, a physics measurement system, or a replacement for drawing, so option A is correct.

Correct answer: A. Observing which colours cannot be easily made by mixing others

Explanation: The governing concept is that primary colours are treated as starting colours in the traditional pigment system; they are not normally obtained by mixing other basic pigments. A suitable experiment is to try mixing available colours and record which colours cannot be reproduced reliably, then use those as the primary set for the lesson. Adding black, folding paper, or merely writing names does not test colour identity, so A is correct.

Correct answer: B. It is a primary colour

Explanation: The governing concept is the definition of a primary pigment colour. In the traditional school model, a primary colour is treated as a basic colour that cannot be produced by mixing the other colours in that system. Since yellow is described this way, option B is correct. Neutral, complementary and metallic describe different properties and do not explain its position in pigment mixing.

Correct answer: A. It can attract attention to the focal point

Explanation: The governing concept is emphasis in composition: a small amount of a strong colour can create an accent and guide the viewer’s eye. Red is visually powerful, so placing it selectively near the main subject can strengthen the focal point without overwhelming the whole design. Therefore option A is correct. The other options are incorrect because limited red does not neutralise every colour, hide the picture, or change blue into yellow.

Correct answer: A. A calm and deep effect

Explanation: The governing concept is colour psychology and the warm–cool relationship. Blue is commonly perceived as cool, receding, calm, and sometimes deep or serious, especially when used over a large area. Thus option A is the best answer, although context and neighbouring colours can modify the feeling. Blue does not normally create an extremely warm effect, guarantee comedy, or produce complete neutrality.

Correct answer: A. Whether the question refers to painting or light

Explanation: The governing concept is that different colour systems use different primary sets. In traditional subtractive painting, red, yellow, and blue are commonly taught as the primary colours; in additive light, red, green, and blue are the primary channels. Consequently, the wording and context must determine the answer, so option A is correct. Option order, option length, and spelling are test-taking details with no scientific connection to the colour model.

Correct answer: A. It cannot be made by mixing other colours

Explanation: The governing concept is the traditional subtractive pigment model, in which primary colours serve as basic starting colours for mixing. Under this classroom convention, a primary colour is not produced by combining other colours within the same system; red, yellow, and blue are the familiar examples. Option A is correct. Brightness, natural origin, and identical appearance across media are not defining criteria.

Correct answer: B. Traditional pigment system

Explanation: The governing concept is that the definition of primary colours depends on the medium and colour model. In traditional art education, red, yellow, and blue are treated as the basic pigment colours from which other classroom colours can be mixed, so option B is correct. Light-based screens generally use RGB, while modern printing commonly uses CMYK; neither supports the RYB answer in this question.

Correct answer: C. Yellow

Explanation: The governing concept is colour value, meaning the relative lightness or darkness perceived in a colour. Among the traditional primary colours, yellow generally has the lightest natural value, while blue usually appears darker and red lies between them. This does not mean every pigment has identical brightness, but it is the standard visual-art comparison. Therefore, yellow in option C is the most appropriate answer; the claim that all three are equal ignores their usual value differences.

Correct answer: B. Blue

Explanation: The governing concept is relative colour value. In the traditional red-yellow-blue set, blue generally appears darkest, yellow lightest and red intermediate when the colours are viewed at comparable strength. The exact result can vary with the pigment, but the question asks for the usual traditional comparison. White is not one of the traditional primary colours and has a light value. Thus option B, blue, is the best answer.

Correct answer: B. Yellow

Explanation: The governing concept is the expressive use of colour value and temperature. Yellow is a light, warm primary colour strongly associated with sunlight, illumination and glowing surfaces. Placing it in a controlled area of a painting can strengthen the impression of a light source, especially when surrounded by darker or cooler colours. Blue is generally cool, while violet and green are not traditional primary colours. Therefore, option B is the most suitable answer.

Correct answer: A. Red

Explanation: The governing concept is colour psychology in visual art. Red is a primary colour that usually attracts attention quickly and is associated with danger, urgency, energy, heat, and strong emotion. Therefore option A is the best answer for a warning or forceful emotional effect. Blue may suggest calmness, yellow can signal caution, and grey is neutral, although cultural context can modify these associations.

Correct answer: B. Red, green, blue

Explanation: The governing concept is additive colour theory, which describes emitted light rather than paint. In the standard light system, red, green, and blue are the primary channels because their intensities can combine to create many colours, including white. Therefore option B is correct. Red-yellow-blue is a traditional painting model, cyan-magenta-yellow is mainly subtractive, and the final group contains secondary colours in common light terminology.

Correct answer: C. Cyan, magenta, yellow

Explanation: The governing concept is the subtractive colour system used by printing inks. Cyan, magenta, and yellow are selected because each ink absorbs one broad portion of white light and reflects the remaining colours; their screened combinations reproduce many printed hues. Thus option C is correct. RGB belongs to emitted light displays, red-yellow-blue is a traditional art model, and the last group is not a primary printing set. Black is often added in CMYK for detail and density.

Correct answer: A. The upper pigment allows some light to pass through

Explanation: The governing concept is transparency, or glazing, in layered painting. A transparent upper pigment does not block all incident light; some light passes through it, interacts with the lower layer, and returns to the viewer. The lower layer therefore remains visually influential and can contribute to optical colour mixing. An opaque layer would hide it, and pigments do not generate light by themselves. Option A is correct.

Correct answer: C. Red Green Blue

Explanation: The governing concept is additive colour mixing, in which coloured light is combined. Red, green and blue are the primary channels of the RGB system; combining their light at suitable intensities can produce a wide range of colours and, together at full intensity, white light. RYB is a traditional pigment model, CMY is subtractive, and orange-green-violet are not the light primaries. Therefore option C is correct.

Correct answer: B. Cyan Magenta Yellow

Explanation: The governing concept is subtractive colour mixing in printing. Cyan, magenta and yellow inks absorb, or subtract, selected wavelengths of white light; combining them produces darker colours. Black is often added as the K in CMYK to improve depth and efficiency, but the subtractive primary set itself is CMY. RGB belongs to additive light, RYB is a traditional painting model, and the remaining set is not a primary system. Option B is correct.

Correct answer: C. White

Explanation: The governing concept is additive mixing of light. Red, green and blue are the three primary components in the RGB model. At equal, sufficiently balanced intensity, all visible colour contributions combine and the eye perceives white light. Black represents the absence of light, while brown and grey would require different intensity or spectral conditions. Hence option C is correct under the stated ideal condition.

Correct answer: B. When it is a basis of the chosen colour system

Explanation: The governing concept is that “primary” is a system-dependent technical term, not a judgement about darkness, popularity or brightness. A primary colour is selected as a basic component of a particular colour model and is used with the other primaries to represent or mix a wide range of colours. Red, green and blue are primary in additive light, while other systems use different sets. Thus option B is correct.

Correct answer: A. Subtractive cyan-magenta-yellow system

Explanation: The subtractive CMY system treats cyan, magenta and yellow as its primary pigment or ink components. Magenta absorbs green light and yellow absorbs blue light, leaving red as the main reflected component when they are combined. Thus red is a secondary result in CMY. In the additive RGB system, red is primary, while a monochromatic system uses only one hue.

Correct answer: B. Its lightness increases and a tint is formed

Explanation: The governing concept is value, or lightness, in colour theory. When white is mixed with a pigment, the resulting colour becomes lighter and is called a tint; its basic hue family generally remains recognisable. Therefore option B is correct. Adding white does not turn the colour into its complement, replace its hue completely, or make it a primary colour of light.

Correct answer: B. A shade is formed and value becomes darker

Explanation: The governing concept is the distinction between tint, shade and tone. Adding black lowers the lightness or value of a pigment and produces a darker version called a shade. Thus option B is correct. A tint is made by adding white, while adding grey makes a tone; black does not automatically create a complementary colour or always increase saturation.

Correct answer: B. Primary-colour limited palette

Explanation: The governing concept is a limited palette: an artwork restricts its main hues to a small, deliberate group. Here the three base hues are red, yellow and blue, and lighter or darker variations do not remove their primary-colour identity. Therefore option B is correct. It is not strictly monochromatic because more than one hue is used, nor complementary or analogous because those schemes describe specific relationships between selected hues.

Correct answer: C. Yellow

Explanation: The governing concept is colour value, which means the relative lightness or darkness of a colour, not simply its intensity or saturation. In the traditional red-yellow-blue palette, yellow generally has the highest light value and therefore appears lightest. Option C is correct. Blue usually has a lower value, red is intermediate, and magenta is not normally included as a traditional painter’s primary in this model.