Temperature and salinity of ocean waters

Correct answer: B. Amount of salt dissolved in water

Explanation: Salinity is the concentration or amount of dissolved salts present in water. In oceanography it is commonly represented in parts per thousand, written as ‰, although practical salinity units are also used in some scientific contexts. It is not a measurement of depth, wave speed or coastline length. Salinity can vary because of evaporation, precipitation, river discharge, freezing and melting of ice, and mixing by currents. These processes alter the ratio between salt and water. Therefore option B gives the correct direct meaning. Option A refers to depth, C refers to wave motion, and D refers to the extent of the coast; all three measure different geographical or oceanographic features.

Correct answer: A. About 35 parts per thousand

Explanation: The average salinity of open ocean water is approximately 35 parts per thousand, commonly written as 35‰ or about 35 practical salinity units. This means that roughly 35 parts of dissolved salts occur in 1,000 parts of seawater by the conventional expression, although the exact composition and measurement method require scientific qualification. Local values differ: evaporation can raise salinity, while rainfall, river discharge, and melting ice can lower it. The figure is therefore an average, not a fixed value everywhere. Options 2, 80, and 120 parts per thousand are not normal average values for open seawater, so option A is correct.

Correct answer: A. More evaporation

Explanation: More evaporation generally increases seawater salinity because evaporation removes water vapour while leaving dissolved salts in the remaining water. If the quantity of salt stays nearly constant but the quantity of water decreases, the salt-to-water ratio rises. This effect is especially strong in hot, dry regions where evaporation exceeds precipitation and freshwater input. Heavy rainfall adds fresh water and usually dilutes salinity. A large river mouth also supplies fresh water and sediments, commonly lowering nearby salinity, while melting ice adds fresh water. Ocean currents and mixing may modify the local result, but among the options, increased evaporation is the direct factor that raises salinity.

Correct answer: A. Rainfall adds fresh water

Explanation: Heavy rainfall can reduce salinity because rainwater is relatively fresh and increases the amount of water without adding an equivalent amount of dissolved salt. The existing salts are therefore diluted, lowering the salt-to-water ratio near the affected surface. The size and duration of the decrease depend on rainfall intensity, mixing, evaporation, river input, and currents. Rain does not normally manufacture salt, turn the sea solid, or automatically stop ocean currents. In some situations, circulation may redistribute the freshwater lens rather than allowing a large local change, but the governing principle remains dilution by freshwater. Thus option A correctly explains why high rainfall can lower salinity.

Correct answer: A. Low

Explanation: Salinity is generally lower near a large river mouth because the river delivers a substantial volume of fresh water into the coastal sea. This freshwater mixes with seawater and dilutes the dissolved salts, producing a low-salinity coastal zone or estuarine region. The exact value depends on river discharge, tidal action, coastal currents, rainfall, evaporation, and the width of the mixing area. It may rise again farther offshore as mixing with normal seawater becomes stronger. A river mouth does not make the sea completely fresh in every case, so “low” is more accurate than zero salinity. Options C and D describe impossible general conditions, and B reverses the usual effect.

Correct answer: A. Evaporation is high

Explanation: A hot and dry marine region can have high salinity because strong heating and low humidity promote rapid evaporation, while rainfall and freshwater supply are limited. Evaporation removes water but leaves most dissolved salts behind, so the concentration of salt in the remaining seawater rises. The final salinity also depends on winds, currents, enclosed-basin circulation, river discharge, and seasonal rainfall; therefore the word “can” is important rather than “always.” High river flow, abundant ice melt, and heavy rainfall generally add fresh water and reduce salinity, although local mixing can modify their effects. Hence option A is the best explanation.

Correct answer: A. It generally decreases.

Explanation: The ocean surface receives most of the Sun’s heating, so water is generally colder at greater depths. Temperature often falls rapidly through the thermocline and changes more slowly in deep water. Local mixing and currents can create exceptions, but option A describes the general pattern.

Correct answer: A. Temperature

Explanation: A thermocline is a layer in a body of water where temperature changes rapidly with depth. The surface is usually warmer than the deeper water, creating a steep temperature gradient in this layer. Therefore, option A is correct.

Correct answer: A. Salinity

Explanation: A halocline is a layer in a body of water where salinity changes rapidly with depth. Salinity can vary because of processes such as evaporation, rainfall, river inflow, and mixing between water masses. Thus, option A is correct.

Correct answer: A. Density

Explanation: A pycnocline is a layer in a body of water where density changes rapidly with depth. Seawater density is influenced mainly by temperature and salinity, which can differ between surface and deep water. Therefore, option A is correct.

Correct answer: A. Temperature and salinity

Explanation: Option A is correct. Seawater density depends mainly on temperature and salinity: cooling generally increases density, and greater salinity also generally increases density.

Correct answer: A. It makes the water denser

Explanation: Option A is correct. At comparable temperature, more dissolved salt generally increases seawater density because it adds mass to the water.

Correct answer: A. They receive less effective solar heating

Explanation: Option A is correct. At high latitudes, the Sun’s rays arrive at a low angle and deliver less energy per unit area, so polar seas receive less effective solar heating than tropical seas.

Correct answer: A. It receives strong, relatively direct solar energy

Explanation: Option A is correct. The tropics receive strong, relatively direct solar radiation through much of the year, which warms the sea surface.

Correct answer: A. It can make the coast relatively warmer

Explanation: Option A is correct. A warm current transports relatively warm water and can transfer heat to nearby air and coastal areas, making them relatively warmer. The exact effect also depends on local winds and geography.

Correct answer: A. It can lower its temperature

Explanation: Option A is correct. A cold current carries relatively cool water into the area and can lower the temperature of nearby surface water. Cooling alone does not remove dissolved salts.

Correct answer: A. Salinity can decrease

Explanation: The governing concept is dilution of seawater. Ice, especially land ice entering the ocean, contributes fresh water with very little dissolved salt. When this fresh water mixes with the upper layer of the sea, the amount of salt is spread through a larger volume of water, so the concentration or salinity of the surface layer can fall. The exact result may vary with evaporation, rainfall, runoff, currents, and mixing, which is why “can decrease” is scientifically safer than “always decreases.” Option A is therefore correct. Option B reverses the usual dilution effect, while C incorrectly suggests that salt is created and D is unrelated.

Correct answer: A. Most salt does not enter the ice

Explanation: The governing concept is brine rejection during freezing. When seawater freezes, the forming ice crystal lattice is made mainly of fresh water and excludes most dissolved salts. The rejected salt remains in the liquid water immediately around or beneath the ice. If this salt-rich water is not rapidly mixed with a much larger volume of seawater, its salt concentration and therefore salinity increase. Option A correctly expresses this process. Option B uses an impossible biological description, C confuses freezing with cloud formation, and D is not necessary: currents may continue even while local salinity rises. The word “can” is important because later mixing can reduce the local increase.

Correct answer: A. River water

Explanation: The governing concept is freshwater dilution of seawater. Rivers carry precipitation and meltwater from land into the ocean, and this inflow contains far less dissolved salt than seawater. Near a river mouth, especially where runoff is large and mixing is limited, the added fresh water can lower the salinity of the surface layer. Option A is therefore correct. Dry wind does not itself add fresh water; it may increase evaporation and consequently raise salinity. Sea salt directly increases the dissolved-salt content, so C has the opposite effect. Strong evaporation removes water but leaves most salt behind, also increasing salinity rather than reducing it. Local currents and mixing can modify the size of the decrease.

Correct answer: A. Low water exchange

Explanation: The governing concept is the balance between salt input, freshwater input, evaporation, and water exchange. An enclosed or nearly enclosed sea has restricted communication with the open ocean, so salty water is not replaced or diluted efficiently. If evaporation is strong, water is removed while most dissolved salts remain, and the resulting salinity can become high. Low water exchange is therefore a valid reason and makes option A correct. Large river inflow, extensive ice melt, and continuous heavy rainfall generally add fresh water and tend to lower salinity, although local conditions may vary. The question asks for one reason, not the only possible factor; restricted exchange is enough to explain the answer.

Correct answer: A. Surface water

Explanation: The governing concept is the penetration and absorption of solar energy. Day-night heating acts directly on the ocean surface, so the uppermost water responds most quickly to changes in incoming radiation and air temperature. Mixing can distribute some heat downward, but the deep ocean has a much smaller and slower daily response because sunlight penetrates only a limited distance and deeper water is insulated from rapid atmospheric changes. Option A is therefore correct. A deep trench is not directly exposed to daily solar heating, an ocean-floor rock is not a water part, and a river valley is outside the stated ocean-water comparison. The amplitude may be moderated by waves, clouds, wind, and high heat capacity, but the surface layer remains the most responsive.

Correct answer: A. The amount of solar heat changes

Explanation: The governing concept is seasonal variation in solar insolation. Because Earth is tilted and revolves around the Sun, the angle, duration, and intensity of sunlight received by a region change through the year. The ocean surface therefore gains different amounts of heat in different seasons. Water has a high heat capacity, so the sea warms and cools more slowly than land, and currents, winds, cloud cover, and mixing further moderate or redistribute the change. Nevertheless, changing solar heat is the fundamental reason, making option A correct. A sea’s name has no physical effect, salinity does not turn into soil, and rivers do not universally stop with the seasons; these alternatives cannot explain the regular temperature cycle.

Correct answer: A. Difference in salinity among regions

Explanation: The governing concept is the spatial distribution of salinity across the ocean surface or from one region to another at a comparable level. “Horizontal” refers to differences across distance on a map, not changes caused solely by moving downward through the water column. Such regional differences arise from evaporation, precipitation, river discharge, ice formation or melting, and ocean currents. Option A correctly defines horizontal distribution as differences in salinity among places. Option B refers to subsurface geology and vertical depth rather than salinity patterns, while C and D concern unrelated land or atmospheric features. The term does not mean that every region has a different value; it describes the pattern of variation from region to region.

Correct answer: A. They transfer warm and cold water

Explanation: The governing concept is advection, or the horizontal transport of water and its heat. Warm currents carry heat from lower latitudes toward cooler regions, while cold currents move cooler water toward warmer latitudes. This redistribution modifies the temperature of coastal and oceanic areas and helps explain why places at similar latitudes may have different temperatures. Option A is correct because it states the direct role of currents in horizontal temperature patterns. Currents do not convert ocean into land, remove all dissolved salt, or block solar radiation. They may also influence evaporation, fog, rainfall, and climate, but those are additional effects; the essential answer is the transfer of warm and cold water.

Correct answer: A. Understanding climate and marine life

Explanation: The governing concept is the importance of ocean temperature in the Earth system. Temperature influences density differences, ocean currents, evaporation, air–sea heat exchange, cloud formation, and the distribution and productivity of marine organisms. Because the ocean stores and transports enormous amounts of heat, its temperature patterns also affect regional weather and long-term climate. Studying temperature is therefore useful for understanding climate and marine life, making option A correct. Road construction, ploughing fields, and measuring mountain height may use other geographical information, but they are not the primary purposes of studying ocean-water temperature. The word “and” in A is appropriate because the variable has both climatic and ecological significance.