Atmospheric pressure and factors affecting it

Correct answer: C. Altitude

Explanation: Altitude is the correct answer because atmospheric pressure decreases as height above sea level increases. With increasing altitude, the column of air above a place becomes shorter and the air becomes less dense. Therefore, the weight exerted by the atmosphere, and hence pressure, falls rapidly. This relationship is important for understanding mountain weather, breathing difficulty, and aircraft operations.

Correct answer: D. The air expands

Explanation: An increase in temperature gives air molecules more kinetic energy, so they move more rapidly and spread farther apart. Under ordinary atmospheric conditions, this causes air to expand and become less dense. The warmer, expanding air tends to rise and may contribute to lower surface pressure. Thus, option D is correct.

Correct answer: A. 76 centimetres

Explanation: At mean sea-level pressure, a standard mercury barometer supports a mercury column about 76 centimetres high, or 760 millimetres. This height represents one standard atmosphere under conventional conditions. The value can vary slightly with temperature, gravity, and weather, but 76 centimetres is the accepted average used in school geography and physics.

Correct answer: D. Clear and dry weather

Explanation: In a high-pressure area, air generally sinks toward the surface. As it descends, it is compressed and warms adiabatically, which lowers its relative humidity and inhibits condensation and cloud formation. Therefore, high-pressure conditions are usually associated with stable, clear, and dry weather, making option D correct. Local exceptions can occur, but the general effect is not persistent rain or snowfall.

Correct answer: B. Near flat sea level

Explanation: At sea level, a location has a larger vertical column of atmosphere above it than a location at higher elevation. The gravitational weight of this overlying air produces greater atmospheric pressure. As altitude increases, part of the air column lies below the observer, so pressure and the weight above generally decrease.

Correct answer: A. Very closely spaced isobars

Explanation: Wind is driven largely by the pressure-gradient force. When isobars are packed closely together, atmospheric pressure changes rapidly over a short horizontal distance, creating a steep pressure gradient. This normally produces stronger winds. Widely spaced isobars indicate a gentler gradient and generally weaker winds.

Correct answer: D. A local breeze

Explanation: Land and water do not heat or cool at the same rate. During the day, land usually becomes warmer more quickly, so air over land rises and relatively higher pressure develops over the cooler sea; air then moves as a sea breeze. At night, the pattern can reverse and produce a land breeze. Thus, the heating contrast creates local pressure differences and local winds.

Correct answer: A. It tends to increase

Explanation: When air descends, more air is added to the column above the surface. This increases the weight exerted on the ground and therefore raises surface pressure. Descending air also tends to spread outward near the surface and is commonly associated with anticyclonic conditions. The exact pressure change depends on the wider weather situation, but the basic tendency is an increase.

Correct answer: B. Low pressure

Explanation: A cyclone is organized around a region of relatively low atmospheric pressure. Air near the surface generally converges toward the low-pressure centre and rises. As the rising air cools, condensation may produce clouds, rainfall, and storms, although the exact weather varies between tropical and temperate cyclones. Therefore, low pressure is the defining pressure feature of a cyclone.

Correct answer: C. A high-pressure centre

Explanation: An anticyclone is a weather system centred on relatively high atmospheric pressure. Air generally descends within or near the high-pressure system and diverges outward at the surface. Subsiding air often inhibits cloud formation, so anticyclones are frequently associated with clear, calm, and stable conditions, although local fog or other effects may occur. The defining feature is the high-pressure centre.

Correct answer: A. Low temperature makes the air dense

Explanation: Polar regions receive relatively little solar heating, so the air near the surface becomes very cold. Cold air contracts and becomes denser than warmer air. The resulting dense air exerts greater pressure on the surface, and large-scale sinking or subsidence can reinforce the polar high-pressure belt. Although circulation and seasonal effects also matter, low temperature is the main thermal explanation requested here.

Correct answer: A. The weight of the air column above it is lower

Explanation: Atmospheric pressure is the force exerted by the weight of the air above a unit area. At a higher altitude, a smaller and less massive column of air lies overhead, so the downward force is lower and pressure decreases. This remains true even when the compared places have the same temperature. Moisture and sunlight can influence pressure in other situations, but they are not the direct reason here.

Correct answer: B. Horizontal pressure distribution

Explanation: An isobar is a line joining places that have equal atmospheric pressure at a specified time or pressure level. A map containing isobars therefore displays how pressure is distributed horizontally across a region. The spacing and arrangement of the lines can also help interpret pressure gradients and likely wind patterns, but the property shown directly is horizontal pressure distribution.

Correct answer: A. Land heats faster than the sea

Explanation: During the day, land generally absorbs solar energy and warms more quickly than water. The air touching the heated land becomes warmer, expands, and rises, lowering surface pressure over the land. The sea changes temperature more slowly because water has a high heat capacity and mixing distributes heat. This pressure contrast helps produce a sea breeze from sea toward land.

Correct answer: B. To increase

Explanation: When air cools, its density increases and it tends to descend. Descending air adds more mass, or weight, to the atmospheric column above the surface. This raises the force exerted on the ground and therefore produces higher surface pressure. Thus, sinking air is generally associated with a high-pressure condition, while rising air is associated with lower pressure.

Correct answer: A. It decreases toward the centre

Explanation: A cyclone is a system of closed isobars in which atmospheric pressure decreases toward the centre. The central low pressure causes air near the surface to converge and rise, often producing clouds, strong winds, and precipitation. This pressure arrangement distinguishes a cyclone from an anticyclone, where pressure increases toward the centre. Hence, option A is correct.

Correct answer: B. High pressure and sinking air

Explanation: An anticyclone is a high-pressure system at the surface. Air generally descends from above in its central region; as it sinks, it becomes compressed and tends to warm and dry. Near the surface, air diverges outward from the high-pressure centre. Descending air suppresses cloud development, so anticyclones are often associated with stable, fair, and relatively clear weather. Thus, B is the correct match.

Correct answer: A. The weight per unit area of the overlying air column.

Explanation: A barometer is an instrument used to measure atmospheric pressure. Atmospheric pressure is the force exerted by the weight of the air above a unit area of the Earth’s surface. Mercury and aneroid barometers express this pressure in units such as hectopascals, millibars, or millimetres of mercury. Therefore, option A is correct; the instrument does not directly measure humidity, rainfall, or temperature.

Correct answer: A. It is an elongated zone of relatively low pressure.

Explanation: A trough is an elongated region of relatively low atmospheric pressure, often extending from the centre of a depression or lying between areas of higher pressure. Air may converge and rise along a trough, particularly when moisture and instability are present. Consequently, troughs can support cloud formation, showers, or thunderstorms, although they do not guarantee rain everywhere. Option A gives the defining structural feature.

Correct answer: B. From sea to land

Explanation: Near the surface, air moves from a region of relatively high pressure toward a region of relatively low pressure. During the day, land usually heats faster than water, so air over land becomes warmer, expands, and contributes to lower pressure. The cooler sea retains relatively higher pressure, driving air from sea to land. This onshore flow is the daytime sea breeze.

Correct answer: B. Land cools quickly and forms high pressure

Explanation: At night, land loses heat more rapidly than the sea. The air above the land cools, becomes denser, and produces relatively higher surface pressure. The sea remains comparatively warmer, so pressure over it is relatively lower. Air therefore flows from land toward the sea; this offshore movement is called a land breeze. Hence B is correct.

Correct answer: C. Pressure always remains the same with increasing altitude

Explanation: Atmospheric pressure is the force exerted by the weight of the air column above a surface. As altitude increases, the air column above becomes shorter and contains less air, so pressure normally decreases. It may not decrease at exactly the same rate everywhere, but it does not remain constant. Thus, the claim that pressure always stays the same with height is incorrect, making option C the answer.

Correct answer: A. It keeps air near Earth and makes its weight act on the surface

Explanation: Gravity attracts atmospheric gases toward Earth and prevents them from dispersing completely into space. Because the air is held around the planet, it has weight, and that weight exerts a force on the Earth’s surface and on objects within the atmosphere. This force per unit area is atmospheric pressure. Therefore, option A correctly describes gravity’s basic role.

Correct answer: C. The weight of the overlying air column decreases

Explanation: Option C is correct. Atmospheric pressure is produced by the weight of the air above a surface. As altitude increases, the amount and weight of the overlying air column decrease, so the downward force per unit area becomes smaller. Air density also normally decreases upward, reinforcing this pattern. Although temperature and gravity can influence the exact rate of change, the reduced overlying air column is the principal physical explanation.

Correct answer: A. 1013.25 millibars

Explanation: Option A is correct because standard atmospheric pressure at mean sea level is defined as 1013.25 millibars, or 1013.25 hectopascals. The same pressure is approximately 760 millimetres of mercury, but 760 is not a value in millibars. The unit in the option is therefore decisive. Values such as 500 or 100 millibars are much lower and are normally associated with conditions high in the atmosphere, not standard sea level.