Update
Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है • Muft Shiksha™ एक 100% Free Education Portal है 🇮🇳, जिसका उद्देश्य Class 9–12 के हर विद्यार्थी तक High-Quality Education को पूरी तरह मुफ्त पहुँचाना है। 🇮🇳 हम मानते हैं कि अच्छी शिक्षा किसी student की आर्थिक स्थिति पर निर्भर नहीं होनी चाहिए। 🇮🇳 हर विद्यार्थी को वही Quality Study Material, MCQs, Quizzes, Exam Preparation, Concept-Based Learning और Bilingual Support मिलना चाहिए, जो आमतौर पर महंगी Coaching या Premium Platforms में मिलता है। Muft Shiksha™ 🇮🇳 इसी सोच के साथ बनाया गया है
Subjects List

Class 12 Business Studies Expert Quiz

Level 40 • 50/50 questions • 25 seconds per question.

Level readiness 50/50 Questions
Time Left 20:50 25 sec/question
RewardsCoins + XP
ModeClassic Quiz
Share
Question 1 / 50 0 score
Answered 0/50 Correct 0 Time 20:50

एक कारखाने ने स्टॉपवॉच से समय मापा लेकिन पहले कार्य की सर्वोत्तम विधि तय नहीं की। इस कारण कौन सा निष्कर्ष सबसे सही है?

A factory measured time with a stopwatch but did not first decide the best work method. Which conclusion is most correct?

Explanation opens after your attempt
Correct Answer

A. समय मानक वैज्ञानिक रूप से संदिग्ध हो सकता हैThe time standard may be scientifically doubtful

Step 1

Concept

Without fixing the right method the time standard may be wrong. Exam tip: place method study before time study.

Step 2

Why this answer is correct

The correct answer is A. समय मानक वैज्ञानिक रूप से संदिग्ध हो सकता है / The time standard may be scientifically doubtful. Without fixing the right method the time standard may be wrong. Exam tip: place method study before time study.

Step 3

Exam Tip

सही विधि तय किए बिना समय मानक गलत हो सकता है। परीक्षा में विधि अध्ययन को समय अध्ययन से पहले रखें।

Open Question Page
Ask Friends

यदि प्रबंधन वैज्ञानिक लक्ष्य बनाता है लेकिन श्रमिकों को लक्ष्य बनाने की प्रक्रिया से बाहर रखता है तो कौन सा टेलर सिद्धांत सबसे अधिक कमजोर होगा?

If management sets scientific targets but excludes workers from the target setting process which Taylor principle is most weakened?

Explanation opens after your attempt
Correct Answer

B. सहयोग न कि व्यक्तिगतवादCooperation not individualism

Step 1

Concept

Scientific targets also need participation and cooperation. Exam tip: identify scientific method and cooperation separately.

Step 2

Why this answer is correct

The correct answer is B. सहयोग न कि व्यक्तिगतवाद / Cooperation not individualism. Scientific targets also need participation and cooperation. Exam tip: identify scientific method and cooperation separately.

Step 3

Exam Tip

वैज्ञानिक लक्ष्य के साथ भागीदारी और सहयोग भी जरूरी है। परीक्षा में वैज्ञानिक विधि और सहयोग को अलग पहचानें।

Open Question Page
Ask Friends

एक श्रमिक 96 इकाई बनाता है जबकि मानक 94 इकाई है और उच्च दर ₹15 प्रति इकाई है। विभेदात्मक खंड मजदूरी के अनुसार मजदूरी कितनी होगी?

A worker produces 96 units while the standard is 94 units and the high rate is ₹15 per unit. What will be the wage under differential piece wage system?

Explanation opens after your attempt
Correct Answer

C. ₹1440

Step 1

Concept

Output is above standard so high rate applies on all units and wage is \(96 \times 15 = 1440\). Exam tip: compare output with standard first.

Step 2

Why this answer is correct

The correct answer is C. ₹1440. Output is above standard so high rate applies on all units and wage is \(96 \times 15 = 1440\). Exam tip: compare output with standard first.

Step 3

Exam Tip

मानक से अधिक उत्पादन पर उच्च दर पूरी इकाइयों पर लगेगी। परीक्षा में पहले उत्पादन की मानक से तुलना करें।

Open Question Page
Ask Friends

यदि श्रमिक कहते हैं कि दक्षता बढ़ने का लाभ मालिक रखता है और मालिक श्रमिकों को अविश्वसनीय मानता है तो किस विचार की सबसे गहरी आवश्यकता है?

If workers say owners keep the gain from higher efficiency and owners consider workers unreliable which idea is most deeply needed?

Explanation opens after your attempt
Correct Answer

D. मानसिक क्रांतिMental revolution

Step 1

Concept

Changing the basic attitude of both sides is mental revolution. Exam tip: connect distrust and gain sharing with mental revolution.

Step 2

Why this answer is correct

The correct answer is D. मानसिक क्रांति / Mental revolution. Changing the basic attitude of both sides is mental revolution. Exam tip: connect distrust and gain sharing with mental revolution.

Step 3

Exam Tip

दोनों पक्षों की मूल सोच बदलना मानसिक क्रांति है। परीक्षा में अविश्वास और लाभ बंटवारे को mental revolution से जोड़ें।

Open Question Page
Ask Friends

कार्यात्मक फोरमैनशिप में एक ही श्रमिक को कई विशेषज्ञों से निर्देश मिलते हैं। इसका सबसे संभावित प्रबंधकीय जोखिम क्या है?

In functional foremanship one worker receives instructions from many specialists. What is the most likely managerial risk?

Explanation opens after your attempt
Correct Answer

A. समन्वय के अभाव में निर्देशों का भ्रमConfusion of instructions due to lack of coordination

Step 1

Concept

Instructions from many specialists make coordination necessary. Exam tip: compare it with Fayol’s unity of command.

Step 2

Why this answer is correct

The correct answer is A. समन्वय के अभाव में निर्देशों का भ्रम / Confusion of instructions due to lack of coordination. Instructions from many specialists make coordination necessary. Exam tip: compare it with Fayol’s unity of command.

Step 3

Exam Tip

कई विशेषज्ञों से निर्देश मिलने पर समन्वय जरूरी हो जाता है। परीक्षा में इसे फेयोल की आदेश की एकता से तुलना करें।

Open Question Page
Ask Friends

यदि उत्पादन में दोष इसलिए बढ़े क्योंकि कार्य निर्देश कार्ड में गलत क्रम लिखा था तो किस विशेषज्ञ की भूमिका पहले जांची जाएगी?

If defects increased because the wrong sequence was written on the instruction card whose role should be checked first?

Explanation opens after your attempt
Correct Answer

B. इंस्ट्रक्शन कार्ड क्लर्कInstruction card clerk

Step 1

Concept

Written work instructions are linked with instruction card clerk. Exam tip: separate the root cause of defect from defect detection.

Step 2

Why this answer is correct

The correct answer is B. इंस्ट्रक्शन कार्ड क्लर्क / Instruction card clerk. Written work instructions are linked with instruction card clerk. Exam tip: separate the root cause of defect from defect detection.

Step 3

Exam Tip

लिखित कार्य निर्देश instruction card clerk से जुड़े हैं। परीक्षा में दोष के मूल कारण और दोष पकड़ने वाले को अलग पहचानें।

Open Question Page
Ask Friends

यदि उत्पादन मार्ग सही है लेकिन काम शुरू होते समय सामग्री तैयार नहीं है तो रूट क्लर्क के बजाय किस विशेषज्ञ की भूमिका जांचनी चाहिए?

If the production route is correct but material is not ready when work starts which specialist should be checked instead of route clerk?

Explanation opens after your attempt
Correct Answer

C. गैंग बॉसGang boss

Step 1

Concept

Gang boss arranges tools and materials before work starts. Exam tip: distinguish route from setup.

Step 2

Why this answer is correct

The correct answer is C. गैंग बॉस / Gang boss. Gang boss arranges tools and materials before work starts. Exam tip: distinguish route from setup.

Step 3

Exam Tip

गैंग बॉस काम शुरू कराने के लिए साधन और सामग्री की व्यवस्था देखता है। परीक्षा में route और setup को अलग रखें।

Open Question Page
Ask Friends

एक कंपनी ने उत्पादों की किस्में घटाईं पर ग्राहकों की जरूरी मांग भी हट गई। सरलीकरण के बारे में कौन सा निष्कर्ष सही है?

A company reduced product varieties but also removed essential customer demand. Which conclusion about simplification is correct?

Explanation opens after your attempt
Correct Answer

D. सरलीकरण में अनावश्यक विविधता घटानी चाहिए जरूरी मांग नहींSimplification should reduce unnecessary variety not essential demand

Step 1

Concept

Simplification means reducing unnecessary varieties. Exam tip: focus on the word unnecessary.

Step 2

Why this answer is correct

The correct answer is D. सरलीकरण में अनावश्यक विविधता घटानी चाहिए जरूरी मांग नहीं / Simplification should reduce unnecessary variety not essential demand. Simplification means reducing unnecessary varieties. Exam tip: focus on the word unnecessary.

Step 3

Exam Tip

सरलीकरण का अर्थ अनावश्यक किस्में घटाना है। परीक्षा में unnecessary शब्द पर ध्यान दें।

Open Question Page
Ask Friends

मानक 110 इकाई है। श्रमिक 109 इकाई बनाता है। निम्न दर ₹8 और उच्च दर ₹10 है। मजदूरी कितनी होगी?

Standard is 110 units. A worker produces 109 units. Low rate is ₹8 and high rate is ₹10. What will be the wage?

Explanation opens after your attempt
Correct Answer

A. ₹872

Step 1

Concept

Even one unit below standard gets the low rate so wage is \(109 \times 8 = 872\). Exam tip: compare output carefully in borderline cases.

Step 2

Why this answer is correct

The correct answer is A. ₹872. Even one unit below standard gets the low rate so wage is \(109 \times 8 = 872\). Exam tip: compare output carefully in borderline cases.

Step 3

Exam Tip

मानक से एक इकाई कम होने पर भी निम्न दर लागू होगी। परीक्षा में borderline case में output को ध्यान से मिलाएं।

Open Question Page
Ask Friends

किस स्थिति में गति अध्ययन की बजाय विधि अध्ययन अधिक उपयुक्त होगा?

In which situation would method study be more appropriate than motion study?

Explanation opens after your attempt
Correct Answer

B. पूरे उत्पादन प्रवाह और सामग्री मार्ग को फिर से डिजाइन करना होEntire production flow and material route need redesign

Step 1

Concept

Improving the whole process and material flow is the area of method study. Exam tip: keep the scope of motion and method separate.

Step 2

Why this answer is correct

The correct answer is B. पूरे उत्पादन प्रवाह और सामग्री मार्ग को फिर से डिजाइन करना हो / Entire production flow and material route need redesign. Improving the whole process and material flow is the area of method study. Exam tip: keep the scope of motion and method separate.

Step 3

Exam Tip

पूरी प्रक्रिया और सामग्री प्रवाह सुधारना विधि अध्ययन का विषय है। परीक्षा में motion और method का क्षेत्र अलग रखें।

Open Question Page
Ask Friends

यदि बहुत तेज श्रमिक पर आधारित समय मानक से सामान्य श्रमिक लगातार असफल होते हैं तो कौन सी तकनीकी त्रुटि हुई?

If normal workers repeatedly fail due to a time standard based on a very fast worker what technical error occurred?

Explanation opens after your attempt
Correct Answer

C. प्रतिनिधि श्रमिक के बजाय असामान्य श्रमिक पर मापन हुआMeasurement used an abnormal worker instead of a representative worker

Step 1

Concept

Time study requires choosing a representative worker. Exam tip: doubt standards based on abnormal workers.

Step 2

Why this answer is correct

The correct answer is C. प्रतिनिधि श्रमिक के बजाय असामान्य श्रमिक पर मापन हुआ / Measurement used an abnormal worker instead of a representative worker. Time study requires choosing a representative worker. Exam tip: doubt standards based on abnormal workers.

Step 3

Exam Tip

समय अध्ययन में प्रतिनिधि श्रमिक का चयन जरूरी है। परीक्षा में abnormal worker से बने standard पर संदेह करें।

Open Question Page
Ask Friends

एक कार्य में कुल 600 मिनट हैं जिनमें 60 मिनट आवश्यक विश्राम है। प्रति इकाई समय 12 मिनट है। मानक उत्पादन क्या होगा?

A task has total 600 minutes including 60 minutes necessary rest. Time per unit is 12 minutes. What will be the standard output?

Explanation opens after your attempt
Correct Answer

C. 45 इकाई45 units

Step 1

Concept

Working time is (600 - 60 = 540) minutes and output is \(540 \div 12 = 45\) units. Exam tip: deduct necessary rest to get available time.

Step 2

Why this answer is correct

The correct answer is C. 45 इकाई / 45 units. Working time is (600 - 60 = 540) minutes and output is \(540 \div 12 = 45\) units. Exam tip: deduct necessary rest to get available time.

Step 3

Exam Tip

कार्य समय 540 मिनट होगा और उत्पादन 45 इकाई होगा। परीक्षा में आवश्यक विश्राम घटाकर उपलब्ध समय लें।

Open Question Page
Ask Friends

यदि मानक उत्पादन तय है लेकिन उपकरणों की गुणवत्ता हर दिन बदलती है तो विभेदात्मक मजदूरी में कौन सी समस्या आएगी?

If standard output is fixed but quality of tools changes every day what problem will arise in differential wages?

Explanation opens after your attempt
Correct Answer

A. तुलना और भुगतान की निष्पक्षता कमजोर होगीFairness of comparison and payment will weaken

Step 1

Concept

Standard tools are needed for fair comparison. Exam tip: connect wage fairness with standardisation.

Step 2

Why this answer is correct

The correct answer is A. तुलना और भुगतान की निष्पक्षता कमजोर होगी / Fairness of comparison and payment will weaken. Standard tools are needed for fair comparison. Exam tip: connect wage fairness with standardisation.

Step 3

Exam Tip

निष्पक्ष तुलना के लिए मानक उपकरण भी जरूरी हैं। परीक्षा में wage fairness को standardisation से जोड़ें।

Open Question Page
Ask Friends

यदि दोषों का कारण मशीन की खराबी है तो inspector दोष पकड़ सकता है लेकिन सुधार के लिए किसकी भूमिका प्रमुख होगी?

If defects are caused by machine breakdown the inspector can detect defects but whose role is central for correction?

Explanation opens after your attempt
Correct Answer

B. मरम्मत बॉसRepair boss

Step 1

Concept

Correcting machine breakdown is linked with repair boss. Exam tip: separate defect detection from root cause correction.

Step 2

Why this answer is correct

The correct answer is B. मरम्मत बॉस / Repair boss. Correcting machine breakdown is linked with repair boss. Exam tip: separate defect detection from root cause correction.

Step 3

Exam Tip

मशीन खराबी सुधारना repair boss से जुड़ा है। परीक्षा में defect detection और root cause correction अलग रखें।

Open Question Page
Ask Friends

किस विकल्प में योजना पक्ष के दो विशेषज्ञ और उत्पादन पक्ष के दो विशेषज्ञ सही दिए गए हैं?

Which option correctly gives two planning specialists and two production specialists?

Explanation opens after your attempt
Correct Answer

A. रूट क्लर्क टाइम एंड कॉस्ट क्लर्क गैंग बॉस इंस्पेक्टरRoute clerk time and cost clerk gang boss inspector

Step 1

Concept

Route and time and cost are planning side while gang and inspector are production side. Exam tip: read mixed classification carefully.

Step 2

Why this answer is correct

The correct answer is A. रूट क्लर्क टाइम एंड कॉस्ट क्लर्क गैंग बॉस इंस्पेक्टर / Route clerk time and cost clerk gang boss inspector. Route and time and cost are planning side while gang and inspector are production side. Exam tip: read mixed classification carefully.

Step 3

Exam Tip

रूट और टाइम एंड कॉस्ट योजना पक्ष में हैं तथा गैंग और इंस्पेक्टर उत्पादन पक्ष में हैं। परीक्षा में mixed classification ध्यान से पढ़ें।

Open Question Page
Ask Friends

यदि वैज्ञानिक विधि से उत्पादन बढ़ता है लेकिन लाभ वितरण में अन्याय है तो टेलर की कौन सी धारणा अधूरी रह जाती है?

If output rises through scientific method but gain sharing remains unfair which Taylor idea remains incomplete?

Explanation opens after your attempt
Correct Answer

C. मानसिक क्रांति और दोनों पक्षों की समृद्धिMental revolution and prosperity of both parties

Step 1

Concept

Scientific efficiency also needs fair thinking and trust. Exam tip: read output gain and fair sharing together.

Step 2

Why this answer is correct

The correct answer is C. मानसिक क्रांति और दोनों पक्षों की समृद्धि / Mental revolution and prosperity of both parties. Scientific efficiency also needs fair thinking and trust. Exam tip: read output gain and fair sharing together.

Step 3

Exam Tip

वैज्ञानिक दक्षता के साथ न्यायपूर्ण सोच और विश्वास भी जरूरी हैं। परीक्षा में output gain और fair sharing को साथ पढ़ें।

Open Question Page
Ask Friends

यदि श्रमिकों की गति तेज कर दी गई लेकिन अनावश्यक हाथ और शरीर की गतियां नहीं हटाईं गईं तो कौन सी दक्षता अभी छिपी रह जाएगी?

If workers are made faster but unnecessary hand and body movements are not removed what efficiency will remain hidden?

Explanation opens after your attempt
Correct Answer

D. समय और ऊर्जा की संभावित बचतPossible saving of time and energy

Step 1

Concept

Making work faster and removing useless motions are different. Exam tip: remember the difference between speed boss and motion study.

Step 2

Why this answer is correct

The correct answer is D. समय और ऊर्जा की संभावित बचत / Possible saving of time and energy. Making work faster and removing useless motions are different. Exam tip: remember the difference between speed boss and motion study.

Step 3

Exam Tip

तेज काम कराना और बेकार गति हटाना अलग बातें हैं। परीक्षा में speed boss और motion study का अंतर याद रखें।

Open Question Page
Ask Friends

कंपनी ने 24 मॉडल घटाकर 6 रखे और प्रत्येक मॉडल की समान गुणवत्ता तय की। कौन सा संयुक्त प्रयोग हुआ?

A company reduced 24 models to 6 and fixed uniform quality for each model. Which combined application occurred?

Explanation opens after your attempt
Correct Answer

B. सरलीकरण और मानकीकरणSimplification and standardisation

Step 1

Concept

Reducing models is simplification and uniform quality is standardisation. Exam tip: in two clue cases write both techniques.

Step 2

Why this answer is correct

The correct answer is B. सरलीकरण और मानकीकरण / Simplification and standardisation. Reducing models is simplification and uniform quality is standardisation. Exam tip: in two clue cases write both techniques.

Step 3

Exam Tip

मॉडल घटाना सरलीकरण है और समान गुणवत्ता मानकीकरण है। परीक्षा में two clue case में दोनों तकनीकें लिखें।

Open Question Page
Ask Friends

यदि प्रबंधन केवल उच्च उत्पादन को पुरस्कृत करता है लेकिन थकान के कारण अनुपस्थिति बढ़ जाती है तो कौन सा संतुलन आवश्यक है?

If management rewards only high output but absenteeism rises due to fatigue what balance is necessary?

Explanation opens after your attempt
Correct Answer

C. विभेदात्मक मजदूरी के साथ थकान अध्ययनFatigue study with differential wages

Step 1

Concept

Human fatigue and rest must be considered along with incentives. Exam tip: link incentive and fatigue together.

Step 2

Why this answer is correct

The correct answer is C. विभेदात्मक मजदूरी के साथ थकान अध्ययन / Fatigue study with differential wages. Human fatigue and rest must be considered along with incentives. Exam tip: link incentive and fatigue together.

Step 3

Exam Tip

प्रोत्साहन के साथ मानव थकान और विश्राम भी देखना जरूरी है। परीक्षा में incentive और fatigue को साथ जोड़ें।

Open Question Page
Ask Friends

यदि वैज्ञानिक चयन के बाद भी श्रमिक का प्रदर्शन कमजोर है तो टेलर की दृष्टि से कौन सा प्रश्न सबसे पहले पूछना चाहिए?

If performance remains weak after scientific selection which question should be asked first from Taylor’s view?

Explanation opens after your attempt
Correct Answer

B. क्या उसे सही कार्य विधि और प्रशिक्षण मिलाDid he receive correct work method and training

Step 1

Concept

Correct training is needed after correct selection. Exam tip: connect selection with training and development.

Step 2

Why this answer is correct

The correct answer is B. क्या उसे सही कार्य विधि और प्रशिक्षण मिला / Did he receive correct work method and training. Correct training is needed after correct selection. Exam tip: connect selection with training and development.

Step 3

Exam Tip

सही चयन के बाद सही प्रशिक्षण भी जरूरी है। परीक्षा में selection को training and development से जोड़ें।

Open Question Page
Ask Friends

एक श्रमिक 88 इकाई बनाता है। मानक 88 है। नीति कहती है कि मानक पर उच्च दर ₹9 लगेगी। मजदूरी कितनी होगी?

A worker produces 88 units. Standard is 88. Policy says high rate ₹9 applies at standard. What will be the wage?

Explanation opens after your attempt
Correct Answer

B. ₹792

Step 1

Concept

For output equal to standard the high rate applies as per policy so wage is \(88 \times 9 = 792\). Exam tip: read rate policy in equal to standard cases.

Step 2

Why this answer is correct

The correct answer is B. ₹792. For output equal to standard the high rate applies as per policy so wage is \(88 \times 9 = 792\). Exam tip: read rate policy in equal to standard cases.

Step 3

Exam Tip

मानक के बराबर उत्पादन पर policy के अनुसार उच्च दर लगेगी। परीक्षा में equal to standard case में rate policy पढ़ें।

Open Question Page
Ask Friends

एक केस में कोई खुला संघर्ष नहीं है लेकिन श्रमिक और प्रबंधन सुधार सुझाव साझा नहीं करते। कौन सा निष्कर्ष अधिक सटीक है?

In a case there is no open conflict but workers and management do not share improvement suggestions. Which conclusion is more accurate?

Explanation opens after your attempt
Correct Answer

B. सतही harmony हो सकती है लेकिन cooperation कमजोर हैSurface harmony may exist but cooperation is weak

Step 1

Concept

Absence of conflict is harmony but active joint effort is cooperation. Exam tip: separate passive peace and active cooperation.

Step 2

Why this answer is correct

The correct answer is B. सतही harmony हो सकती है लेकिन cooperation कमजोर है / Surface harmony may exist but cooperation is weak. Absence of conflict is harmony but active joint effort is cooperation. Exam tip: separate passive peace and active cooperation.

Step 3

Exam Tip

विवाद न होना harmony है पर सक्रिय संयुक्त प्रयास cooperation है। परीक्षा में passive peace और active cooperation अलग करें।

Open Question Page
Ask Friends

यदि कार्य के चरण सही हैं पर श्रमिक की बैठने की ऊंचाई से कंधे की थकान बढ़ती है तो कौन सा अध्ययन प्राथमिक होगा?

If work steps are correct but the worker’s seating height increases shoulder fatigue which study becomes primary?

Explanation opens after your attempt
Correct Answer

B. थकान अध्ययनFatigue study

Step 1

Concept

Seating arrangement is a working condition that affects fatigue. Exam tip: connect ergonomic fatigue with fatigue study.

Step 2

Why this answer is correct

The correct answer is B. थकान अध्ययन / Fatigue study. Seating arrangement is a working condition that affects fatigue. Exam tip: connect ergonomic fatigue with fatigue study.

Step 3

Exam Tip

बैठने की व्यवस्था कार्य दशा है जो थकान को प्रभावित करती है। परीक्षा में ergonomic fatigue को fatigue study से जोड़ें।

Open Question Page
Ask Friends

यदि कार्य विधि बदलकर प्रति इकाई समय 18 मिनट से 12 मिनट हो गया तो पुराने समय मानक के बारे में क्या करना चाहिए?

If work method changes and time per unit falls from 18 minutes to 12 minutes what should be done about the old time standard?

Explanation opens after your attempt
Correct Answer

C. समय मानक का पुनरीक्षण करना चाहिएTime standard should be revised

Step 1

Concept

When method changes time standard may change. Exam tip: remember method change means standard revision.

Step 2

Why this answer is correct

The correct answer is C. समय मानक का पुनरीक्षण करना चाहिए / Time standard should be revised. When method changes time standard may change. Exam tip: remember method change means standard revision.

Step 3

Exam Tip

विधि बदलने पर समय मानक बदल सकता है। परीक्षा में method change means standard revision याद रखें।

Open Question Page
Ask Friends

किस विकल्प में टेलर की वैज्ञानिक प्रबंधन प्रणाली को सबसे गलत ढंग से समझा गया है?

Which option most wrongly interprets Taylor’s scientific management system?

Explanation opens after your attempt
Correct Answer

D. यह हर निर्णय को अनुभव और अनुमान पर छोड़ता हैIt leaves every decision to experience and guesswork

Step 1

Concept

Scientific management adopts science instead of guesswork. Exam tip: treat guesswork as opposite to Taylor.

Step 2

Why this answer is correct

The correct answer is D. यह हर निर्णय को अनुभव और अनुमान पर छोड़ता है / It leaves every decision to experience and guesswork. Scientific management adopts science instead of guesswork. Exam tip: treat guesswork as opposite to Taylor.

Step 3

Exam Tip

वैज्ञानिक प्रबंधन अनुमान के स्थान पर विज्ञान अपनाता है। परीक्षा में guesswork को Taylor के विपरीत मानें।

Open Question Page
Ask Friends

यदि कुल उपलब्ध कार्य समय 495 मिनट है और प्रति इकाई समय 9 मिनट है पर निरीक्षण में 3 इकाई अस्वीकृत हैं तो उपयोगी उत्पादन क्या होगा?

If total available work time is 495 minutes and time per unit is 9 minutes but 3 units are rejected in inspection what is useful output?

Explanation opens after your attempt
Correct Answer

B. 52 इकाई52 units

Step 1

Concept

First \(495 \div 9 = 55\) units are produced and 3 rejected units are deducted. Exam tip: separate output and accepted output.

Step 2

Why this answer is correct

The correct answer is B. 52 इकाई / 52 units. First \(495 \div 9 = 55\) units are produced and 3 rejected units are deducted. Exam tip: separate output and accepted output.

Step 3

Exam Tip

पहले 55 इकाई बनेंगी और 3 अस्वीकृत घटेंगी। परीक्षा में output और accepted output अलग करें।

Open Question Page
Ask Friends

यदि कार्यस्थल पर मशीन सही है और मार्ग भी सही है पर श्रमिक नियम तोड़कर सुरक्षा साधन नहीं पहनते तो कौन सा विशेषज्ञ सीधे संबंधित होगा?

If machines are proper and route is correct but workers break rules by not wearing safety gear which specialist is directly concerned?

Explanation opens after your attempt
Correct Answer

C. डिसिप्लिनेरियनDisciplinarian

Step 1

Concept

Rule following and discipline are linked with disciplinarian. Exam tip: connect safety rule breaking with discipline.

Step 2

Why this answer is correct

The correct answer is C. डिसिप्लिनेरियन / Disciplinarian. Rule following and discipline are linked with disciplinarian. Exam tip: connect safety rule breaking with discipline.

Step 3

Exam Tip

नियम पालन और अनुशासन disciplinarian से जुड़े हैं। परीक्षा में safety rule breaking को discipline से जोड़ें।

Open Question Page
Ask Friends

किस स्थिति में मानकीकरण के बावजूद विभेदात्मक मजदूरी अन्यायपूर्ण हो सकती है?

In which situation may differential wages be unfair despite standardisation?

Explanation opens after your attempt
Correct Answer

C. अलग श्रमिकों को अलग गुणवत्ता का कच्चा माल मिलता हैDifferent workers receive different quality raw material

Step 1

Concept

Unequal raw material standard weakens comparison. Exam tip: equal conditions are necessary for fairness.

Step 2

Why this answer is correct

The correct answer is C. अलग श्रमिकों को अलग गुणवत्ता का कच्चा माल मिलता है / Different workers receive different quality raw material. Unequal raw material standard weakens comparison. Exam tip: equal conditions are necessary for fairness.

Step 3

Exam Tip

कच्चे माल का असमान मानक तुलना को कमजोर करता है। परीक्षा में fairness के लिए समान conditions जरूरी हैं।

Open Question Page
Ask Friends

यदि उत्पादन प्रक्रिया में सामग्री तीन विभागों से घूमकर वापस आती है और लागत बढ़ती है तो कौन सा अध्ययन सबसे गहरे स्तर पर सुधार करेगा?

If material moves through three departments and returns causing higher cost which study will improve it at the deepest level?

Explanation opens after your attempt
Correct Answer

B. विधि अध्ययनMethod study

Step 1

Concept

Improving material flow and process route is method study. Exam tip: connect process redesign with method study.

Step 2

Why this answer is correct

The correct answer is B. विधि अध्ययन / Method study. Improving material flow and process route is method study. Exam tip: connect process redesign with method study.

Step 3

Exam Tip

सामग्री प्रवाह और प्रक्रिया मार्ग सुधारना method study है। परीक्षा में process redesign को method study से जोड़ें।

Open Question Page
Ask Friends

यदि एक कंपनी ने लक्ष्य और उच्च दर घोषित की लेकिन यह नहीं बताया कि मानक कैसे तय हुआ तो कौन सा जोखिम बढ़ेगा?

If a company announced target and high rate but did not explain how the standard was fixed what risk increases?

Explanation opens after your attempt
Correct Answer

A. विश्वास और मानक की स्वीकार्यता घटेगीTrust and acceptance of the standard will fall

Step 1

Concept

Without transparency even scientific standards may create resistance. Exam tip: see standard setting and communication together.

Step 2

Why this answer is correct

The correct answer is A. विश्वास और मानक की स्वीकार्यता घटेगी / Trust and acceptance of the standard will fall. Without transparency even scientific standards may create resistance. Exam tip: see standard setting and communication together.

Step 3

Exam Tip

पारदर्शिता के बिना वैज्ञानिक मानक भी विरोध पैदा कर सकते हैं। परीक्षा में standard setting और communication साथ देखें।

Open Question Page
Ask Friends

किस विकल्प में science not rule of thumb और standardisation दोनों साथ दिखते हैं?

Which option shows both science not rule of thumb and standardisation together?

Explanation opens after your attempt
Correct Answer

B. मापन से सर्वोत्तम विधि तय कर सभी के लिए वही विधि लागू करनाDeciding best method through measurement and applying it for all

Step 1

Concept

Deciding method by measurement is science and applying uniform method is standardisation. Exam tip: identify combined clues.

Step 2

Why this answer is correct

The correct answer is B. मापन से सर्वोत्तम विधि तय कर सभी के लिए वही विधि लागू करना / Deciding best method through measurement and applying it for all. Deciding method by measurement is science and applying uniform method is standardisation. Exam tip: identify combined clues.

Step 3

Exam Tip

मापन से विधि तय करना science है और समान विधि लागू करना standardisation है। परीक्षा में combined clue पहचानें।

Open Question Page
Ask Friends

यदि योजना पक्ष अच्छी योजना बनाता है पर उत्पादन पक्ष उसे लागू नहीं करता तो कार्यात्मक फोरमैनशिप की कौन सी चुनौती सामने आती है?

If the planning side makes a good plan but the production side does not implement it which challenge of functional foremanship appears?

Explanation opens after your attempt
Correct Answer

B. समन्वय की कमीLack of coordination

Step 1

Concept

Planning execution coordination is needed along with specialisation. Exam tip: remember both specialisation and coordination.

Step 2

Why this answer is correct

The correct answer is B. समन्वय की कमी / Lack of coordination. Planning execution coordination is needed along with specialisation. Exam tip: remember both specialisation and coordination.

Step 3

Exam Tip

विशेषज्ञता के साथ planning execution coordination भी आवश्यक है। परीक्षा में specialization और coordination दोनों याद रखें।

Open Question Page
Ask Friends

यदि अधिक उत्पादन के लिए मशीन लेआउट बदला गया लेकिन श्रमिक को ज्यादा झुकना पड़ता है तो कौन सा संयुक्त परीक्षण चाहिए?

If machine layout is changed for higher output but workers have to bend more what combined test is needed?

Explanation opens after your attempt
Correct Answer

B. गति अध्ययन और थकान अध्ययनMotion study and fatigue study

Step 1

Concept

Layout changes motion and bending may increase fatigue. Exam tip: check efficiency and fatigue balance.

Step 2

Why this answer is correct

The correct answer is B. गति अध्ययन और थकान अध्ययन / Motion study and fatigue study. Layout changes motion and bending may increase fatigue. Exam tip: check efficiency and fatigue balance.

Step 3

Exam Tip

लेआउट से motion बदलता है और झुकना fatigue बढ़ा सकता है। परीक्षा में efficiency और fatigue balance देखें।

Open Question Page
Ask Friends

मानक 120 इकाई है। श्रमिक 120 इकाई बनाता है। नीति कहती है कि मानक पर निम्न दर ₹6 लागू होगी। मजदूरी क्या होगी?

Standard is 120 units. A worker produces 120 units. Policy says low rate ₹6 applies at standard. What will be the wage?

Explanation opens after your attempt
Correct Answer

B. ₹720

Step 1

Concept

For equal to standard cases the given policy applies so wage is \(120 \times 6 = 720\). Exam tip: read policy in equal cases.

Step 2

Why this answer is correct

The correct answer is B. ₹720. For equal to standard cases the given policy applies so wage is \(120 \times 6 = 720\). Exam tip: read policy in equal cases.

Step 3

Exam Tip

मानक के बराबर case में दी गई policy के अनुसार निम्न दर लगेगी। परीक्षा में equal case में policy पढ़ना जरूरी है।

Open Question Page
Ask Friends

टेलर के अनुसार मालिक और श्रमिक लाभ के छोटे हिस्से पर झगड़ने के बजाय किस व्यापक लक्ष्य पर ध्यान दें?

According to Taylor what broader goal should owners and workers focus on instead of fighting over a small share of gain?

Explanation opens after your attempt
Correct Answer

A. कुल उत्पादन और कुल समृद्धि बढ़ानाIncreasing total output and total prosperity

Step 1

Concept

Mental revolution makes both parties think of increasing total gains. Exam tip: remember the surplus enlargement idea.

Step 2

Why this answer is correct

The correct answer is A. कुल उत्पादन और कुल समृद्धि बढ़ाना / Increasing total output and total prosperity. Mental revolution makes both parties think of increasing total gains. Exam tip: remember the surplus enlargement idea.

Step 3

Exam Tip

मानसिक क्रांति दोनों पक्षों को कुल लाभ बढ़ाने की सोच देती है। परीक्षा में surplus enlargement idea याद रखें।

Open Question Page
Ask Friends

किस कथन में टेलर और फेयोल का सबसे सटीक अंतर है?

Which statement gives the most accurate difference between Taylor and Fayol?

Explanation opens after your attempt
Correct Answer

A. टेलर दुकान तल दक्षता पर और फेयोल सामान्य प्रशासनिक सिद्धांतों पर केंद्रित थेTaylor focused on shop floor efficiency and Fayol on general administrative principles

Step 1

Concept

Taylor focused on work level efficiency and Fayol on general management. Exam tip: remember Taylor shop floor and Fayol administration.

Step 2

Why this answer is correct

The correct answer is A. टेलर दुकान तल दक्षता पर और फेयोल सामान्य प्रशासनिक सिद्धांतों पर केंद्रित थे / Taylor focused on shop floor efficiency and Fayol on general administrative principles. Taylor focused on work level efficiency and Fayol on general management. Exam tip: remember Taylor shop floor and Fayol administration.

Step 3

Exam Tip

टेलर का केंद्र कार्य स्तर दक्षता था और फेयोल का केंद्र सामान्य प्रबंधन था। परीक्षा में Taylor shop floor और Fayol administration याद रखें।

Open Question Page
Ask Friends

यदि मानकीकरण लागू है लेकिन श्रमिकों को मानक के पीछे की तर्कशक्ति नहीं बताई गई तो कौन सा टेलर विचार इसे सुधार सकता है?

If standardisation is applied but workers are not told the reasoning behind standards which Taylor idea can improve this?

Explanation opens after your attempt
Correct Answer

C. मानसिक क्रांति और सहयोगMental revolution and cooperation

Step 1

Concept

Communication is needed for trust and participation. Exam tip: see the human side along with standards.

Step 2

Why this answer is correct

The correct answer is C. मानसिक क्रांति और सहयोग / Mental revolution and cooperation. Communication is needed for trust and participation. Exam tip: see the human side along with standards.

Step 3

Exam Tip

विश्वास और भागीदारी के लिए संवाद जरूरी है। परीक्षा में standards के साथ human side भी देखें।

Open Question Page
Ask Friends

एक कार्य में प्रति इकाई समय 14 मिनट है। उपलब्ध कार्य समय 560 मिनट है। यदि 2 इकाई पुनःकार्य में चली जाती हैं तो पहली बार सही उपयोगी उत्पादन कितना होगा?

A task takes 14 minutes per unit. Available work time is 560 minutes. If 2 units go for rework what is the first pass useful output?

Explanation opens after your attempt
Correct Answer

B. 38 इकाई38 units

Step 1

Concept

First \(560 \div 14 = 40\) units are produced and 2 rework units are deducted. Exam tip: separate total output and first pass output.

Step 2

Why this answer is correct

The correct answer is B. 38 इकाई / 38 units. First \(560 \div 14 = 40\) units are produced and 2 rework units are deducted. Exam tip: separate total output and first pass output.

Step 3

Exam Tip

पहले 40 इकाई बनेंगी और 2 rework घटेंगी। परीक्षा में कुल output और first pass output अलग रखें।

Open Question Page
Ask Friends

यदि संगठन सही व्यक्ति को सही काम देता है लेकिन लंबे समय तक कौशल उन्नयन नहीं करता तो किस सिद्धांत का गतिशील भाग छूट जाता है?

If an organisation gives the right person the right job but does not upgrade skills for a long time which dynamic part of the principle is missed?

Explanation opens after your attempt
Correct Answer

A. निरंतर विकास और प्रशिक्षणContinuous development and training

Step 1

Concept

Taylor stressed developing each person to greatest efficiency. Exam tip: understand development as an ongoing process.

Step 2

Why this answer is correct

The correct answer is A. निरंतर विकास और प्रशिक्षण / Continuous development and training. Taylor stressed developing each person to greatest efficiency. Exam tip: understand development as an ongoing process.

Step 3

Exam Tip

टेलर ने प्रत्येक व्यक्ति को अधिकतम दक्षता तक विकसित करने पर जोर दिया। परीक्षा में development को ongoing process समझें।

Open Question Page
Ask Friends

किस विकल्प में work study की चार तकनीकों का सबसे सटीक गहन मिलान है?

Which option gives the most accurate deep matching of the four work study techniques?

Explanation opens after your attempt
Correct Answer

A. विधि प्रक्रिया गति हरकत समय मानक समय थकान विश्राम और दशाएंMethod process motion movements time standard time fatigue rest and conditions

Step 1

Concept

This correctly states the focus of all four techniques. Exam tip: remember the key focus of each study separately.

Step 2

Why this answer is correct

The correct answer is A. विधि प्रक्रिया गति हरकत समय मानक समय थकान विश्राम और दशाएं / Method process motion movements time standard time fatigue rest and conditions. This correctly states the focus of all four techniques. Exam tip: remember the key focus of each study separately.

Step 3

Exam Tip

यह चारों तकनीकों के केंद्र को सही बताता है। परीक्षा में प्रत्येक अध्ययन का key focus अलग याद रखें।

Open Question Page
Ask Friends

यदि उत्पादन लक्ष्य पूरा हुआ लेकिन श्रमिक अत्यधिक थकान से अगले दिन अनुपस्थित रहे तो किस मानक की गुणवत्ता संदिग्ध है?

If output target is achieved but workers remain absent next day due to heavy fatigue which standard quality is doubtful?

Explanation opens after your attempt
Correct Answer

A. व्यावहारिक और टिकाऊ उत्पादन मानकPractical and sustainable output standard

Step 1

Concept

A target is sustainable only when fatigue and rest are balanced. Exam tip: look beyond one day output to sustainability.

Step 2

Why this answer is correct

The correct answer is A. व्यावहारिक और टिकाऊ उत्पादन मानक / Practical and sustainable output standard. A target is sustainable only when fatigue and rest are balanced. Exam tip: look beyond one day output to sustainability.

Step 3

Exam Tip

लक्ष्य टिकाऊ तभी है जब थकान और विश्राम भी संतुलित हों। परीक्षा में one day output से आगे sustainability देखें।

Open Question Page
Ask Friends

यदि गुणवत्ता दोष इसलिए हैं कि श्रमिक जानबूझकर standard instruction नहीं मानते तो inspector के साथ कौन सा विशेषज्ञ जरूरी होगा?

If quality defects occur because workers deliberately ignore standard instructions which specialist is needed along with inspector?

Explanation opens after your attempt
Correct Answer

B. डिसिप्लिनेरियनDisciplinarian

Step 1

Concept

Inspector detects defects but deliberate rule breaking needs discipline. Exam tip: choose specialist based on cause.

Step 2

Why this answer is correct

The correct answer is B. डिसिप्लिनेरियन / Disciplinarian. Inspector detects defects but deliberate rule breaking needs discipline. Exam tip: choose specialist based on cause.

Step 3

Exam Tip

Inspector दोष पकड़ेगा लेकिन जानबूझकर नियम न मानने पर discipline जरूरी है। परीक्षा में cause based specialist चुनें।

Open Question Page
Ask Friends

यदि फोरमैनशिप में speed boss गुणवत्ता बढ़ाने के लिए मशीन रोकने का आदेश देता है जबकि inspector ने दोष नहीं बताया तो कौन सा मुद्दा दिखता है?

If in foremanship the speed boss orders stopping a machine for quality while inspector has not reported defects what issue is shown?

Explanation opens after your attempt
Correct Answer

A. भूमिकाओं का overlap और coordination की जरूरतRole overlap and need for coordination

Step 1

Concept

Speed and quality are different specialist roles. Exam tip: understand specialist roles and coordination together.

Step 2

Why this answer is correct

The correct answer is A. भूमिकाओं का overlap और coordination की जरूरत / Role overlap and need for coordination. Speed and quality are different specialist roles. Exam tip: understand specialist roles and coordination together.

Step 3

Exam Tip

गति और गुणवत्ता अलग विशेषज्ञ भूमिकाएं हैं। परीक्षा में specialist roles और coordination को साथ समझें।

Open Question Page
Ask Friends

यदि प्रबंधन श्रमिकों से कहता है कि scientific management का अर्थ केवल तेज काम करना है तो सबसे अच्छा सुधार कौन सा है?

If management says scientific management means only working faster what is the best correction?

Explanation opens after your attempt
Correct Answer

A. यह अध्ययन मानक प्रशिक्षण सहयोग प्रोत्साहन और नियंत्रण की पूरी प्रणाली हैIt is a whole system of study standards training cooperation incentives and control

Step 1

Concept

Scientific management is not only speed up but an integrated system. Exam tip: do not treat it as a single technique.

Step 2

Why this answer is correct

The correct answer is A. यह अध्ययन मानक प्रशिक्षण सहयोग प्रोत्साहन और नियंत्रण की पूरी प्रणाली है / It is a whole system of study standards training cooperation incentives and control. Scientific management is not only speed up but an integrated system. Exam tip: do not treat it as a single technique.

Step 3

Exam Tip

वैज्ञानिक प्रबंधन केवल speed up नहीं बल्कि integrated system है। परीक्षा में इसे single technique न समझें।

Open Question Page
Ask Friends

यदि समय लागत रिकॉर्ड सही नहीं हैं तो उच्च output के बावजूद प्रबंधन कौन सा निर्णय सही नहीं ले पाएगा?

If time cost records are not correct what decision may management fail to take despite high output?

Explanation opens after your attempt
Correct Answer

A. लागत दक्षता और मजदूरी आकलनCost efficiency and wage assessment

Step 1

Concept

Cost records are needed along with high output. Exam tip: connect time and cost clerk with control.

Step 2

Why this answer is correct

The correct answer is A. लागत दक्षता और मजदूरी आकलन / Cost efficiency and wage assessment. Cost records are needed along with high output. Exam tip: connect time and cost clerk with control.

Step 3

Exam Tip

High output के साथ cost record जरूरी है। परीक्षा में time and cost clerk को control से जोड़ें।

Open Question Page
Ask Friends

कौन सा विकल्प टेलर की scientific selection को केवल भर्ती से आगे समझाता है?

Which option explains Taylor’s scientific selection beyond mere recruitment?

Explanation opens after your attempt
Correct Answer

C. योग्यता परीक्षण सही कार्य आवंटन प्रशिक्षण और विकासAbility testing right job allocation training and development

Step 1

Concept

Scientific selection extends to right person right job and development. Exam tip: add training beyond recruitment.

Step 2

Why this answer is correct

The correct answer is C. योग्यता परीक्षण सही कार्य आवंटन प्रशिक्षण और विकास / Ability testing right job allocation training and development. Scientific selection extends to right person right job and development. Exam tip: add training beyond recruitment.

Step 3

Exam Tip

Scientific selection सही व्यक्ति सही काम और development तक जाता है। परीक्षा में recruitment से आगे training जोड़ें।

Open Question Page
Ask Friends

यदि सरलीकरण से inventory cost घटती है लेकिन training material पुराने 20 variants पर बना है तो कौन सा अगला कदम उचित है?

If simplification reduces inventory cost but training material is still based on old 20 variants what next step is appropriate?

Explanation opens after your attempt
Correct Answer

A. नए standard variants के अनुसार training material अपडेट करनाUpdate training material according to new standard variants

Step 1

Concept

After simplification training and standard documents should be updated. Exam tip: also check implementation follow up.

Step 2

Why this answer is correct

The correct answer is A. नए standard variants के अनुसार training material अपडेट करना / Update training material according to new standard variants. After simplification training and standard documents should be updated. Exam tip: also check implementation follow up.

Step 3

Exam Tip

सरलीकरण के बाद प्रशिक्षण और मानक दस्तावेज अपडेट होने चाहिए। परीक्षा में implementation follow up भी देखें।

Open Question Page
Ask Friends

यदि एक फैक्टरी पुराने अनुभव को पूरी तरह नकारकर केवल किताब में लिखे मानक अपनाती है और स्थानीय दशाएं नहीं देखती तो टेलर की सही वैज्ञानिक सोच क्या होगी?

If a factory rejects all experience and adopts only written standards without checking local conditions what would Taylor’s correct scientific approach be?

Explanation opens after your attempt
Correct Answer

A. स्थानीय तथ्यों और प्रयोग से सर्वोत्तम विधि सत्यापित करनाVerify the best method through local facts and experiments

Step 1

Concept

Science means real testing and fact based decision. Exam tip: do not treat science as blind copying.

Step 2

Why this answer is correct

The correct answer is A. स्थानीय तथ्यों और प्रयोग से सर्वोत्तम विधि सत्यापित करना / Verify the best method through local facts and experiments. Science means real testing and fact based decision. Exam tip: do not treat science as blind copying.

Step 3

Exam Tip

विज्ञान का अर्थ वास्तविक परीक्षण और तथ्य आधारित निर्णय है। परीक्षा में science को blind copying न समझें।

Open Question Page
Ask Friends

यदि मानक समय 10 मिनट है और नए motion study से अनावश्यक हरकत हटकर समय 7 मिनट हो गया तो कौन सा combined conclusion सही है?

If standard time is 10 minutes and after motion study removing unnecessary movement time becomes 7 minutes which combined conclusion is correct?

Explanation opens after your attempt
Correct Answer

A. Motion study ने समय घटाया और time standard revise होना चाहिएMotion study reduced time and time standard should be revised

Step 1

Concept

Motion study may change work time so the time standard needs revision. Exam tip: identify interaction between techniques.

Step 2

Why this answer is correct

The correct answer is A. Motion study ने समय घटाया और time standard revise होना चाहिए / Motion study reduced time and time standard should be revised. Motion study may change work time so the time standard needs revision. Exam tip: identify interaction between techniques.

Step 3

Exam Tip

Motion study से कार्य समय बदल सकता है इसलिए time standard पुनरीक्षण योग्य है। परीक्षा में technique interaction पहचानें।

Open Question Page
Ask Friends

एक केस में मापन से विधि तय हुई औजार मानक हुए श्रमिक प्रशिक्षित हुए विश्राम संतुलित हुआ और लाभ बंटवारे पर संवाद हुआ। सबसे सटीक निष्कर्ष क्या है?

In a case method was fixed by measurement tools were standardised workers were trained rest was balanced and gain sharing was discussed. What is the most accurate conclusion?

Explanation opens after your attempt
Correct Answer

C. टेलर के वैज्ञानिक प्रबंधन का समन्वित और मानवीय प्रयोग हुआIntegrated and human centred application of Taylor’s scientific management occurred

Step 1

Concept

Many Taylor elements together show a balanced form of scientific management. Exam tip: combine multiple clues.

Step 2

Why this answer is correct

The correct answer is C. टेलर के वैज्ञानिक प्रबंधन का समन्वित और मानवीय प्रयोग हुआ / Integrated and human centred application of Taylor’s scientific management occurred. Many Taylor elements together show a balanced form of scientific management. Exam tip: combine multiple clues.

Step 3

Exam Tip

कई Taylor elements साथ मिलकर scientific management का balanced रूप दिखाते हैं। परीक्षा में multiple clues को combine करें।

Open Question Page
Ask Friends
FAQs

Class 12 Business Studies Quiz FAQs

How many questions are in this quiz?

This level is designed for 50 active questions. Currently 50 questions are available for the selected class and difficulty.

Is there a timer in this quiz?

Yes, the timer uses 25 seconds per question for Expert difficulty and shows the total remaining time on the page.

Can I open each question separately?

Yes, every question has its own SEO-friendly page with answer, explanation and related practice links.