Topic Wise MCQ

Art Education Colour filling and blending MCQ Questions for Class 9

Practice focused topic-wise MCQs with answers and explanations for quick revision and exam preparation.

Share

Start Colour filling and blending Topic Quiz

Difficulty select karke sirf is topic ke focused MCQs practice karein. Score, timer aur explanations student-friendly flow me milenge.

Topic Navigation

Continue Chapter Revision

Colour filling and blending Practice Questions

Showing 401-410 of 600 questions.

Search

एक बड़े क्षेत्र में समान रंग भरते समय ऊपर का भाग हल्का और नीचे का भाग गहरा हो गया। इसका सबसे संभावित कारण क्या है?

While filling a large area evenly the upper part became light and the lower part dark. What is the most likely cause?

Explanation opens after your attempt
Correct Answer

A. रंग और पानी का अनुपात पूरे क्षेत्र में समान नहीं रहाThe ratio of paint and water was not consistent throughout

Step 1

Concept

Changing paint consistency creates different values. Prepare enough uniform mixture for the whole area.

Step 2

Why this answer is correct

The correct answer is A. रंग और पानी का अनुपात पूरे क्षेत्र में समान नहीं रहा / The ratio of paint and water was not consistent throughout. Changing paint consistency creates different values. Prepare enough uniform mixture for the whole area.

Step 3

Exam Tip

रंग की बदलती संगति से अलग-अलग मान बनते हैं। परीक्षा में पूरे क्षेत्र के लिए पर्याप्त समान मिश्रण पहले तैयार करें।

Open Question Page
Ask Friends

दो नम रंगों की ब्लेंडिंग में बीच का रंग बहुत तेजी से फैलकर दोनों रंगों को ढक रहा है। सर्वोत्तम सुधार क्या है?

In blending two damp colours the middle colour spreads rapidly and covers both colours. What is the best correction?

Explanation opens after your attempt
Correct Answer

B. सतह की अतिरिक्त नमी हटाकर कम रंग लगानाRemove excess surface moisture and apply less paint

Step 1

Concept

Excess moisture and paint cause uncontrolled spreading. Balance a damp surface with a limited paint load.

Step 2

Why this answer is correct

The correct answer is B. सतह की अतिरिक्त नमी हटाकर कम रंग लगाना / Remove excess surface moisture and apply less paint. Excess moisture and paint cause uncontrolled spreading. Balance a damp surface with a limited paint load.

Step 3

Exam Tip

अधिक नमी और रंग अनियंत्रित फैलाव पैदा करते हैं। परीक्षा में नम सतह और सीमित रंग भार का संतुलन रखें।

Open Question Page
Ask Friends

एक समान रंग भराव में प्रत्येक स्ट्रोक की सीमा स्पष्ट दिखाई दे रही है। मुख्य तकनीकी त्रुटि क्या है?

The boundary of every stroke is visible in an even colour filling. What is the main technical error?

Explanation opens after your attempt
Correct Answer

C. अगला स्ट्रोक पिछले गीले किनारे से समय पर नहीं जोड़ा गयाThe next stroke was not joined to the previous wet edge in time

Step 1

Concept

A new stroke beside a dry edge creates a lap mark. Maintain a continuous wet edge.

Step 2

Why this answer is correct

The correct answer is C. अगला स्ट्रोक पिछले गीले किनारे से समय पर नहीं जोड़ा गया / The next stroke was not joined to the previous wet edge in time. A new stroke beside a dry edge creates a lap mark. Maintain a continuous wet edge.

Step 3

Exam Tip

सूखे किनारे पर नया स्ट्रोक लैप मार्क बनाता है। परीक्षा में निरंतर गीला किनारा बनाए रखें।

Open Question Page
Ask Friends

गहरे से हल्के ग्रेडेशन में बीच का भाग अचानक बहुत हल्का हो गया। कौन सा कारण सबसे उचित है?

In a dark-to-light gradation the middle became suddenly too light. Which cause is most appropriate?

Explanation opens after your attempt
Correct Answer

D. एक चरण में बहुत अधिक पानी मिला दिया गयाToo much water was added in one step

Step 1

Concept

A sudden increase in water creates an abrupt value change. Dilute the colour gradually.

Step 2

Why this answer is correct

The correct answer is D. एक चरण में बहुत अधिक पानी मिला दिया गया / Too much water was added in one step. A sudden increase in water creates an abrupt value change. Dilute the colour gradually.

Step 3

Exam Tip

पानी की अचानक वृद्धि मान में तेज बदलाव लाती है। परीक्षा में रंग को धीरे-धीरे पतला करें।

Open Question Page
Ask Friends

एक वृत्ताकार वस्तु में रंग तो अच्छी तरह मिला है लेकिन वह सपाट दिखती है। कौन सा सुधार सबसे प्रभावी होगा?

A circular object is smoothly blended but still appears flat. Which correction would be most effective?

Explanation opens after your attempt
Correct Answer

A. प्रकाश दिशा के अनुसार हल्के से गहरे मान का क्रम बनानाCreate a light-to-dark value sequence according to the light direction

Step 1

Concept

Smooth blending alone is insufficient because volume requires value change. Plan the sequence of light and shadow.

Step 2

Why this answer is correct

The correct answer is A. प्रकाश दिशा के अनुसार हल्के से गहरे मान का क्रम बनाना / Create a light-to-dark value sequence according to the light direction. Smooth blending alone is insufficient because volume requires value change. Plan the sequence of light and shadow.

Step 3

Exam Tip

केवल मुलायम मिश्रण पर्याप्त नहीं होता क्योंकि आयतन के लिए मान परिवर्तन आवश्यक है। परीक्षा में प्रकाश और छाया का क्रम तय करें।

Open Question Page
Ask Friends

दो पूरक रंगों की सीमा पर मटमैला रंग बनने से बचाने का सर्वोत्तम तरीका क्या है?

What is the best way to prevent a muddy colour at the boundary of two complementary colours?

Explanation opens after your attempt
Correct Answer

B. सीमित ओवरलैप और साफ ब्रश से नियंत्रित ब्लेंडिंग करनाUse limited overlap and controlled blending with a clean brush

Step 1

Concept

Overmixing complementary colours may create a neutral muddy colour. Use fewer strokes at their transition.

Step 2

Why this answer is correct

The correct answer is B. सीमित ओवरलैप और साफ ब्रश से नियंत्रित ब्लेंडिंग करना / Use limited overlap and controlled blending with a clean brush. Overmixing complementary colours may create a neutral muddy colour. Use fewer strokes at their transition.

Step 3

Exam Tip

पूरक रंगों का अधिक मिश्रण तटस्थ मटमैला रंग बना सकता है। परीक्षा में उनके संक्रमण पर कम स्ट्रोक रखें।

Open Question Page
Ask Friends

रंग भरने के बाद किनारे बीच की तुलना में अधिक गहरे दिखाई देते हैं। इसका सबसे संभावित कारण क्या है?

After filling the edges appear darker than the centre. What is the most likely cause?

Explanation opens after your attempt
Correct Answer

C. किनारों पर बार-बार रंग लगने से दोहरी परत बन गईRepeated painting along the edges created a double layer

Step 1

Concept

Repeated paint in one area can darken its value. Control the boundary without making unnecessary layers.

Step 2

Why this answer is correct

The correct answer is C. किनारों पर बार-बार रंग लगने से दोहरी परत बन गई / Repeated painting along the edges created a double layer. Repeated paint in one area can darken its value. Control the boundary without making unnecessary layers.

Step 3

Exam Tip

एक ही स्थान पर दोहराए गए रंग से मान गहरा हो सकता है। परीक्षा में सीमा को नियंत्रित करें लेकिन अनावश्यक परतें न बनाएं।

Open Question Page
Ask Friends

गीले रंग पर साफ ब्रश से ब्लेंडिंग करते समय हल्के भाग में पानी का गोल धब्बा बन गया। मुख्य कारण क्या था?

A circular water bloom formed in the light area while blending wet paint with a clean brush. What was the main cause?

Explanation opens after your attempt
Correct Answer

D. साफ ब्रश में आवश्यकता से अधिक पानी थाThe clean brush contained more water than required

Step 1

Concept

Excess water pushes damp pigment and creates a bloom. Blot the brush lightly after rinsing.

Step 2

Why this answer is correct

The correct answer is D. साफ ब्रश में आवश्यकता से अधिक पानी था / The clean brush contained more water than required. Excess water pushes damp pigment and creates a bloom. Blot the brush lightly after rinsing.

Step 3

Exam Tip

अधिक पानी नम रंग को धकेलकर फूल जैसा धब्बा बनाता है। परीक्षा में ब्रश को धोने के बाद हल्का पोंछें।

Open Question Page
Ask Friends

आकाश के ग्रेडेड वॉश में नीचे की ओर गहरा रंग जमा हो रहा है। सबसे उपयुक्त सुधार क्या है?

Dark colour is collecting at the bottom of a graded sky wash. What is the most suitable correction?

Explanation opens after your attempt
Correct Answer

A. साफ हल्के नम ब्रश से अतिरिक्त रंग उठानाLift the excess colour with a clean slightly damp brush

Step 1

Concept

Pooled colour at the bottom may dry into a dark edge. Lift the bead in time.

Step 2

Why this answer is correct

The correct answer is A. साफ हल्के नम ब्रश से अतिरिक्त रंग उठाना / Lift the excess colour with a clean slightly damp brush. Pooled colour at the bottom may dry into a dark edge. Lift the bead in time.

Step 3

Exam Tip

नीचे जमा रंग सूखकर गहरा किनारा बना सकता है। परीक्षा में रंग के मनके को समय रहते उठाएं।

Open Question Page
Ask Friends

एक कलाकार रंग भरते समय बार-बार नया मिश्रण तैयार करता है और हर भाग का रंग थोड़ा अलग हो जाता है। सही योजना क्या होती?

An artist repeatedly prepares new mixtures while filling and each section becomes slightly different. What would have been the correct plan?

Explanation opens after your attempt
Correct Answer

B. पूरे क्षेत्र के लिए पर्याप्त रंग पहले तैयार करनाPrepare enough colour for the entire area beforehand

Step 1

Concept

Preparing enough mixture beforehand keeps colour and consistency uniform. Estimate the required amount for a large area.

Step 2

Why this answer is correct

The correct answer is B. पूरे क्षेत्र के लिए पर्याप्त रंग पहले तैयार करना / Prepare enough colour for the entire area beforehand. Preparing enough mixture beforehand keeps colour and consistency uniform. Estimate the required amount for a large area.

Step 3

Exam Tip

पहले पर्याप्त मिश्रण तैयार करने से रंग और संगति समान रहती है। परीक्षा में बड़े क्षेत्र के लिए रंग की मात्रा का अनुमान लगाएं।

Open Question Page
Ask Friends